SPECIAL REPAIR TO SECURITY LIGHT FITTINGS AND CABLES AND CERTAIN MINOR WORKS AT AF STN PUNE UNDER GE AF LOHEGAON

Amount

Taking down the existing street light fitting and Supply & fix (in Repalcement) energy saving and environmental frindly long life LED Street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with impact and corrosion resistant including thermal management in multiple optics IP 65/IP66 road way luminaries with LEDs as light source and lens embedded on each LED, toughened glass cover and impact resistance of IK07, withinbuilt surge protector and electronic driver fixed on pole including connection complete all as specified and directed.

-ditto- all as per item Ser No 1.00 above but 70 Watt complete all as specified and directed

Taking down the existing Flood lights fitting and Supply & fix (in Repalcement) energy saving and environmental frindly long life exclusive innovative flood light luminaries 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant with LEDs as light source and lens embedded on each LED, toughened glass cover and impact resistance of IK07, with inbuilt surge protector and electronic driver fixed on high mast pole or any any other place as requird on site incl making all nacessary arrangement for fixing complete with MS flat iron clamps (clamp shall be 40x5 mm MS flat), nuts and bolts and washers complete all as specified and directed.

-ditto- all as per item Ser No 3.00 above but 200/210 Watt complete all as specified and directed

Taking down old,rusted, unsv Junction box of any size, type and supply & fix new junction box of size not less than 210 mm x190 mm x 110 mm, made out of Fibre material, shockproof and rustproof, cable entry from bottom. 100% wheather proof and fixing to pole etc using suitable GI clamps of size 25x3mm, nuts, bolts etc for accommodating and including the following complete all as specified and directed:- a) TPN Connector 32 A b) MCB SP 6A-01 Nos

S&F in replacement of PVC insulated 1.5 sqmm copper three core conductor cable FRLS between cable loop box to fitting drawn through the pole/ conduit complete incl taking down old wire/cable all as specified and directed

S&F along pole PVC non metallic conduit of dia 20 mm medium grade including 3 Nos MS clamps and nut bolts etc for fixing along the pole complete all as specified and directed

Taking out the old unsv pole ,Supplying and erecting ( in true vertical position) steel tubular swaged poles complete with cast iron base plate final taper plug, top cover, bolts nuts and screws all as specified of type 410-SP-31 (9.0 mtr length) complete all as specifed in IS 2713 (part-II) 1980 including one coat or red oxide primer and two coats of aluminium paint to exposed surfaces, alternate 30 cm wide white and blue strip painting up to 1.5 Mtr height from ground level and with black bituminous paint for embedded portion of pole complete all as specified and directed

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting it out for laying of cable / pole etc in following soil starta complete all as specified and directed

Soft/loose soil

Hard/dense soil

Soft/ disintegrated rock

Returning, filling in, including spreading, leveling watering, and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed

Removing excavated material at a distance n.exc 50m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed

Supply and laying HDPE DWC pipe 32 mm inner dia SN8 along with coupler on wall/ along ground/ along channel/ in trench/under roof/ along pillar or as directed complete.

Supply and fix GI Pipe Light grade with all connected accessories of sizes 40 mm complete all as specified and directed

Taking down Old unserviceable LT UG cable of service connection or distribution system of any size and removing from site complete all as specified and directed (Excavation and earth work will be measured seperately)

Supply, laying, jointing, testing and commissioning of LT under ground cable 1100 volts grade XLPE (cross linked polythene ) armoured with galvanised round steel wire or steel strip , electric power cable heavy duty, with multi stranded aluminium conductor, laid in trenches, ducts fix on walls/poles with proper size saddles and clamp laid under roads/path/ drain /culverts or enclosed in GI pipe/ fix complete cable complete all as specified and directed , for following size:-

25 Sqmm 3.5 core

16 Sqm 4 core

10 Sqm 4 core

10 Sqm 2 core

Supply and fixing LED Post top fitting 40 Watt 5700 K CCT IP 65 powder coated aluminium die cast and spun aluminium with clear diffuser suitable for landscape lighting incl making necessary arrangement for mounting fitting as reqd on site and testing complete all as specified and directed.

M&L for cement concrete (1:4:8) type D2 in foundation filling and mass concrete using 40mm graded stone aggregate for pole foundation or as per site reuirement at electical installations complete all as specified and directed

M&L for cement concrete (1:2:4) type B1 in foundation filling and mass concrete and coping of poles or as per site reuirement at electical installations complete all as specified and directed incl necessary form work using 20 mm graded stone aggregate etc

Material and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm as earthing lead buried directly in ground vertically in a pit of depth not less than 2.25 metre below ground level with the top edge of earth plate at a depth not less than 1.5 m below normal ground level, connected to and including galvanised iron earth lead wire 4 mm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel, and connected to earthing test point, providing charcoal and common salt all as shown in electrical plate no. 3 of SSR part I, and testing on completion including excavation and earth work in any type of soil, PCC 1:3:6 type C1 earthing chamber, precast slab 50 mm thick in cement concrete 1:2:4 type B1 reinforced with welded steel wire fabric (XPM) weight not less than 4kg/sqm, funnel with wire mesh, watering pipe of 20 mm bore medium grade GI pipe and lugs, earthing wire protected by galvanised iron or steel pipe 15 mm dia medium grade 7.5 metre long complete all as specified and as directed.

Earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6mm as earthing lead buried directly in ground vertically to a depth not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to and including galvanised iron strip 25 X 4 mm as earthing lead by means of bolts, nuts, check nuts & washers etc made of GI and connected to earthing test point all as shown in electrical plate No. 5 of SSR Part I of 2009 & as specified or indicated and testing on completion including excavation/earth work in any type of strata PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab cover 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm), funnel with wire mesh, watering pipe of 20 mm bore medium grade, including galvanised iron strip 25X4 mm with GI protection pipe of 40 mm medium grade up to 7.5 meter length, etc complete all as specified.

Supply install testing and commissioning of LT feeder pillar/ panel board cubical type outdoor, free floor standing factory fabricated made out of 3 mm thick CRCA sheet and suitable size to accommodate incoming and outgoing MCCB, MCB and TPN copper bus bar of rating not less then 1.5 times the rated capacity of incomer MCCB. The TPN bus bar shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on DMC/ Epoxy insuulator. The incoming and outgoing MCCB shall have copper extension links of current carrying cap not less than 1.5 times the rated capacity of individual feeders. The cubicle shall have a detachable bottom stand made of equal angle 50mmx50mmx6mm. A detachable pregrilled gland plate of thickness 3 mm thick should be used at the bottom for entry of armoured cable of adequate size with glands. The above panel shall be front and back openable, lockable, double door and shall be made by CPRI Approved manufacturer. The cost is inclusive of taking down old panel, disconnecting and reconnecting all the cables with new lugs, gland, excavation, PCC foundation etc complete all as directed with following accesories: a) Incoming MCCB FP 63 A 25 KA- 01 Nos b) Outgoing MCCB FP 40 A 16 KA- 02 Nos c) Astronomical street Light Timer - 01 Nos with Auto manual Switch d) Contactor ML3- 01 Nos e) LED type RYB Phase indicator- 01 Set Note: Contractor Shall submit layout diagram of the panel and got approved from Garrison Engineer before Commencement of fabrication.

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connection for street light on OH line incl taking out old unserviceable wire complete all as specified and directed.

Supply and fixing in repair Street light bracket made out of 40mm dia GI tubing medium grade made to shape 1.5 Mtr long with fixing arrangement for LED fitting duly painted with two coats of synthetic aluminium paint over a coat of primer including MS clamps 25x4mm and back plates fabricated from steel section including nuts, bolts, washer etc complete all as specified and directed by Engineer-in-charge.

Point wiring with 1.5 sqmm copper conductor cables (multistranded), FRLSH PVC insulated, insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core copper stranded FRLSH PVC insulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping unsheathed (using colour code as per IS), 1100 Volts grade in and including 3 mm thick plastic laminated sheet top cover for one light /fan/exhaust fan point controlled by one, one way 5 Amp switch with and including continuous 1.5 sqmm copper conductor (multistranded using colour code) FRLSH PVC insulated and unsheathed cable as earth wire connected to earth dolly complete all as specified and directed.

M&L for switch piano flush single pole one way 5/6 amps 240 volts ISI marked

M&L for ceiling rose surface bakelite 3 terminals ISI Marked

Supply & fix LED tube light fitting comprising of 20 watt Aluminium T-8 LED tube rod with inbuilt driver and acessories, the tube rod shall have efficacy of 100 Lm/Watt, including providing prewired CRCA box type batten with holders for fixing LED Tube rod along with provision of 02 no PVC square block for fixing of the fitting with necesary screws, including connecting up with three core 0.5 Sqmm flexible copper conductor cable ceiling rose to fitting terminal complete as specified and directed.

Taking down carefully ceiling fan of any type from any height of ceiling including disconnecting connection wire from ceiling rose .

Hanging only any type ofceiling fan and connecting up including provision of cable from ceiling rose or connector to fan at any height of ceiling and testing complete.

S&F anti suicide fan down rod 600mm long white/opal/ metallic colour as per need , MS pipe zinc plated pipe OD-19mm, thickness 1.8+- 0.05mm , spring set grade 3 corbon spring steel material, zinc plated , MSME tested, on load of 22 KG the anti suicide impact fan rod, the rod will get open from centre, spring inside shall be expanded, fan clamp with suitable coupling, rubber reel, M6 nut bolt and washer, extension spring having M6 loop on top and bottom and pair of connector wire and safety testing complete in all respect as directed.

S&F anti suicide fan down rod 900mm long white/opal/ metallic colour as per need , MS pipe zinc plated pipe OD-19mm, thickness 1.8+- 0.05mm , spring set grade 3 corbon spring steel material, zinc plated , MSME tested, on load of 22 KG the anti suicide impact fan rod, the rod will get open from centre, spring inside shall be expanded, fan clamp with suitable coupling, rubber reel, M6 nut bolt and washer, extension spring having M6 loop on top and bottom and pair of connector wire and safety testing complete in all respect as directed.

Supply, installing and testing of Fire alarm control panel adressable fire dection and alaram type with capacity of two Loop panel with capacity from 99 detectors & 99 modules up to 200 detectors and modules per each loop,complete with all acessories and battery back up for 48 Hrs in stand by mode and 15 Minutes in alaram condition. Each loop shall support analog/addressable devices maximum capacity and have TCP/IP facility and Qwerty key pad for programming and including relay module, Control Module, Zone Module, Fault Isolator, power supply module addon modules. The panel shall be as per tech specification UL listed RS 232 communication port complete in all respect and all as specified and directed.Make - GE/Honeywell

Supply and fix adressable smoke Detectors Complying with and type certified to EN-45 type multisensor detector with heat and smoke combination Photoelectric / Optical with base with self built intelligence as per IS: 11360 all as specified.

Supply, install, testing and comissioning of adessable break glass manual call point including sunken boxes, with built in monitor module will all acessories and signal indicator complete as per tech specification and shall be UL listed complete.

Fire Alarm Sounders / Sirens Electronic type horizontal single stage continous normal operation for atleast 50 minutes with sound level 65 DB to 120 DB measured at 1.5 Mtr with sound output variation of +5 DB 1000 mtrs range with starter and all connected items all as specified.

Supply & lay FRLS 4 core 1.5 sqmm (red Colour) armoured multi stranded copper conductor heavy duty cable saddled in wall/ceiling, truss etc all as specified and directed by engineer-in-charge

Material and labour for providing point wiring with two runs of 2.5 Sqmm multi stranded copper conductor Flame retardant PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core copper stranded Flame retardant PVC insulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings / fixture etc and open recessed type Plastic Enclosure (Plastic Switch Board) ISI marked (IS 14782) for housing one 15 A Switch / sockets complete all as specified and directed by Engr-in-Charge.

S&F switch socket combination 3 pin,16 Amp flush type complete all as specified and directed by Engr-in-Charge.

Supply and fix of Flame proof exhaust fan 300mm sweep heavy duty metal body 230 V incl louvers, 3 core wire and all connected accssories complete all as specified and directed.

Supply an Fix CMRI certified LED flame proof tube light fitting 1 X 20/16 Watts, with driver & LED tube rod, IP 65 protection, including connecting up with three core flexible multi strand copper conductor of size 1.5 Sqmm with flexible metal conduit, including mounting brackets and Fixing including anchor fastners, nut bolts, hooks, chain etc.

M & L for Flame proof point wiring with 1.5 Sqmm 1100 volts grade PVC insulated FRLSH copper conductor single core multi strand flexible cable with proper colour coding in and incl ERW rigid steel conduit & fittings (ISI marked) and accessories incl flame proof bends, copules junctions boxes etc fixed on wall/ceiling with proper fixing arrangements incl proper conductor 1.5 Sqmm PVC insulated unsheathed multi stranded FRLSH copper conductor single core cable (green color) as earth lead continuity conductor fixed to earth terminal and metalic body of light fittings complete all as suitable for one/two independent light point controlled by one way one switch all as specified and directed.

Supply and fixing of CMRI certified explosion proof rotary switch, single pole ON/OFF with cable termination box in LM6, 16 Amps rating 240 volts all as specified and directed.

M&L for making hole in Brick masonary / Stone masonary wall of any thickness and height of round shape and suitable for exhaust fan of 380mm dia and making good disturbed wall and painting distubed area as original complete all as directed.

S&Fix of wall mounted outdoor type double door LT Panel made out of 3 mm thick CRCA Sheet, th panel shall comprise flame proof MCB DB 4 Way made out of Cast aluminium alloy LM6, inside and out side light gray epoxy powder coating shade, with 1 No cable entry for incoming cable/submain wiring and three Nos cable/sub main entry for out going circuits with and including cable gland and stopping plug, 1 No MCB SPN 32 Amp as incoming and 2 Nos MCB SP 10 Amps for out going connections IP 65 protection as per IS 2147/1962. Including making good the distrubed surfaces, connecting existing cables all as direted at site

M&L for Flame proof submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLSH) of size 4 sqmm with proper color coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 4 Sqmm as earth lead in & incl ERW rigid steel conduit & fittings (ISI marked) and accessories incl flame proof bends, copules junctions boxes etc fixed on walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or directed by Engr-in- charge.

EAST PUNE SERVICES (BID ID -3498631)

M/s Harshal Traders (BID ID -3507092)

ONKAR ELECTRIC AND GENERAL STORE (BID ID -3507176)

Suchit constructions (BID ID -3502377)

somnath engineering corporation (BID ID -3500463)