Gharuan CW

Amount

Distribution System

Providing, Stringing out PVC pipes as per ISI-4985 (ISI marked with prior approval of Engineer in charge) casting along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing, including excavation & specials complete as per specifications for less than 3 mtr street width. Complete in all respect (MANUAL)

PVC pipe 63mm o/d

PVC pipe 90mm o/d

Providing, Stringing out PVC pipes as per ISI-4985 (ISI marked with prior approval of Engineer in charge) casting along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing, including excavation & specials complete as per specifications for for more than 3 mtr street width Complete in all respects (Mechanical Means)

PVC pipe 63mm o/d

PVC pipe 90mm o/d

PVC pipe 110mm o/d

PVC pipe 160mm o/d

PVC pipe 200mm o/d

PVC pipe 250mm o/d

Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in theground complete.

Dismantling of cement concrete 80mm thick cement concrete 1:2:4 over 100mm thick C.C. 1:8:16 and making good the same to its original condition complete in all respects as per analysis A-25

PVC pipe 63mm o/d

PVC pipe 90mm o/d

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting.

PVC pipe 63mm o/d

PVC pipe 90mm o/d

PVC pipe 200mm o/d

Dismantling of mettalic road with bitumainous course 50mm to 75 mm thick .

PVC pipe 63mm o/d

PVC pipe 90mm o/d

PVC pipe 110mm o/d

PVC pipe 160mm o/d

Taking out existing CC interlocking paver blocks from footpath/ central verge/ pavement, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in- Charge and refixing of Interlocking Tile 80 mm thick factory made cement concrete interlocking Paving blocks of M- 40 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. Complete as per directions of engineer-in- Charge. ( refer. Anaylsis)

PVC pipe 63mm o/d = 2725 mt x 0.60 (avg cutting) = 1755 sqmt

PVC pipe 90mm o/d = 1448 mt x 0.60 (avg cutting) = 869 sqmt

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge)

Providing, Fixing & jointing Cast Iron Surface box for Sluice Valve, Air Valve, Fire hydrant etc. including all carriages complete 8No. with Each 3kg

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department With each

Size 0.6m x 0.6m

Size 0.9m x 0.9m (Additional 2 No. chambers required at existing W/W)

Making Connection with existing distribution pipe line with proposed upvc distribution pipe line of various diameter i.e. 63, 90, 110 & 160mm i/d.Complete job with clamps, sockets etc.

Rising Main

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications including excavation. (Mechanicaly)

160mm o/d pipe of 10kg/sqcm

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge)

Providing, Fixing & jointing Cast Iron Surface box for Sluice Valve, Air Valve, Fire hydrant etc. including all carriages complete @ 3Kg each

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department (size 0.9m x 0.9m)

House connections

Providing household connection, laying, jointing, fixing, testing MDPE pipe (as approved by Engineer in charge), including cost of excavation, refilling, the trench, CI bib cock as per IS : 210 with stainless steel spindle, 15 mm o/d MDPE pipe 2.50 meter (length on average basis) 15mm o/d GI pipe 2.00 mtr, 3” i/d uPVC clamp, GM ferrule ISI marked, connection of 15 mm i/d ferrule medium, specials such as tees, bends, sockets, elbows, nipples (100mm & 150 mm), union couplings, GI hooks etc. and gun metal peet valve (heavy pattern) with hand wheels on MDPE/GI pipe line laid in the ground or inside the buildings, cutting, threading, making holes in wall and testing in trenches in the ground. All material should be approved make (to be approved of Engineer in charge). Complete job in all respect including cost of carriage.

New house connections

Providing, fixing & jointing water meter in GI pipe line including cutting and threading pipe and making long screw etc. complete including cost of MDPE/G.I. Jam nut Providing, fixing and jointing gun-metal peet valves (Heavy Pattern) with hand wheels, on GI /MDPE Pipe lines laid in the ground or inside buildings including all carriages complete.15mm i/d Gun Metal peet valve heavy pattern. complete. (15mm) Supply of Nipple 15mmx150mm, Supply of Nipple 15mmx100mm elbows unlons, GI Hooks etc. Complete Job.

Providing household connection, laying, jointing, fixing, testing MDPE pipe (as approved by Engineer in charge), including cost of excavation, refilling, the trench, CI bib cock as per IS : 210 with stainless steel spindle, 15 mm o/d MDPE pipe 2.50 meter (length on average basis) 15mm o/d GI pipe 2.00 mtr, 3" i/d uPVC clamp, GM ferrule ISI marked, connection of 15 mm i/d ferrule medium, specials such as tees, bends, sockets, elbows, nipples (100mm & 150 mm), union couplings GI hooks etc. and gun metal peet valve (heavy pattern) with hand wheels on MDPE/GI pipe line laid in the ground or inside the buildings, cutting, threading, making holes in wall and testing in trenches in the ground. All material should be approved make (to be approved of Engineer in charge). Complete job in all respect including cost of carriage.

Provision of washer in existing and proposed water connections as per standard design.

Chlotination Plant

Prov. Installing, testing & commissioning one No. Electronically actuated, Diaphragm Operated, Metering System, Chemical Dosing Chlorinator ,suitable for delivering 0.5 to 6 Litres of Bleaching Powder Solution/Sodium Hypo solution per hour under maximum delivery pressure up to 7 Kg.cm2, and suction lift not less than 1.5 m, as per DWSS. standard specifications.

Pump chamber

Construction of Pump Chamber size with toilet 3.05 m x 3.70 m including cost of gravel pit & electric wiring complete in all respect

Repair of existing pumpchamber

Conglomerate floor 50mm thick cement concrete 1:2:4 on 100mm thick cement concrete 1:8:16 with stone aggregate 40 mm gauge and 100mm fine sand filling. using mechanical mixer for mixing of material

Hollock wood doors shutter windows shutter including hinges, screws, chqwocks, cheats, stops cords etc. complete fixed in position.

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Applying priming coat with metal primer on new steel or iron work including preparation of surface and Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.

White washing (Three coat) inside of pump chamber

Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade.

Providing and fixing of Glass strips 4mm thick in floors

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete. Inside pump Chamber

Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade.

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.

Providing and fixing LED Tube Rod set of reputed quality such as Philips/Salvania Laxman or equivalent. Full size

Providing and fixing LED bulb with holder of reputed quality such as Philips/Salvania Laxman or equivalent. Full size

Development of water works

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing.

Providing & fixing angle iron pickets with angle 40mm x40mm x 6mm including cost of concrete block & painting complete in all respects as per standard Drawing.

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing.

Construction of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing

Provision of masonry gate pillar & MS Steel Gate size 1.22mtr x 1.37 mtr as per standard Drawing.

Construction of Cement Concrete, Foot Path with masonry toe wall & earth filling inside water works as per standard Drawing.

Providing & Fixing Sign Board size 1.60m x 2.70 m

Enviornmental details

Grassing of grounds with doob grass including uprooting rank vegetation and weeds by digging the area to a depth of 15 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, mixing fertilizer, rough dressing and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts, planting grass roots in rows 10 cm apart in both directions, watering, weeding and maintenance till turf is formed @ 0.60 cum per 100 sqm. ( 1 no water work sites)

Planting hedge including digging of trench 60 cm wide to 15 cm depth and mixing FYM, fertilizer and insecticides, planting of sapling at 30cm distance from plant to plant in two rows @ 4.65 cum per 100m & supplying & Planting hedge Plants at 30cm. Apart.

Supplying and planting permanent trees in prepared pits and watering size 75 cmx75cmx75cm deep, refilling the excavated earth with manure supplied @ 0.113 cum each and watering supplying through tractor tanker.

Supplying and planting permanent shrubs in prepared pits and watering, digging of pits on earth size 0.60mx0.60m deep, refilling the excavated earth mixed with manure supplied @ 0.056 cum each and watering supply through the tractor tanker.

Automation system

Supply / Installation / Testing / Commissioning of IOT based Water Supply monitoring and Automation system which includes hardware and software with minimum battery backup of 2 days for Main HUB. The system includes Chlorination Dosing System and Water level Controller complete.

Carriage

Extra for Carriage of Fine & Course aggregate i.e. Sand & Bajri from query to water works site beyond 5 km (Qty as worked out for the components to be constructed. (45-5=40 km.)

Aggregate

Guru Nanak Engineering Works