Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹23.7 L+₹1.6 L (7.04%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹25.5 L+₹3.3 L (14.8%)Rejected-AOC | L3 | Rejected-AOC L3 |
Tender Value
₹22.8 L
EMD Value
₹45,600
Closing Date
23 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Hakimpet
Secunderabad
PROVN OF CERTAIN MAJOR REVENUE/MINOR WORKS (B/R) AT AFS BEGUMPET AND CAW UNDER GE (AF) HAKIMPET
2023_MES_628932_1
8599/E8
Open Tender
Civil Works
Item Rate
180 days
Begumpet and CAW
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) Hakimpet
₹45,600
Yes
9 Jan 2024
20 Nov 2023
25 Dec 2023
20 Nov 2023
23 Dec 2023
4 Dec 2023
Amount
Demolition of cement concrete (unreinforced) including tiles in ground floors and pavings not exceeding 15 cm thickness.(below or above ground level) and removed debris outside MD land
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises outside MD land
Taking down cement or cement lime plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.
M & L 25 mm thick PCC 1:2:4 type B1 (Using 20 mm graded granite stone aggregate) in sub base of floorings.
M & L for Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6
M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting.
M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:6 is to be finished even and smooth without using extra cement, complete all as specified & directed.
M&L for preparing newly plastered surfaces of walls and applying three coats of white wash.
M&L for preparing old decorated plastered or unplastered surfaces of ceiling and applying one coat of white wash, complete all as specified and directed.
S&F Coloured Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match
M&L for Glazed ceramic Coloured tiles 450 x 350 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match.
M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10cm but n exc 20 cm girth all as specified and directed
Taking down or down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store all as specified and directed.
Supplying and laying 16mm of CPVC pipes SDR11 & Plain CPVC SDR 11 fitting on walls/ceiling or laying in floors complete all as specified
Supplying and laying 20mm of CPVC pipes SDR11 & Plain CPVC SDR 11 fitting on walls/ceiling or laying in floors complete all as specified
Supply and fix 15 mm bore 2 way bib tap brass chromium plated fancy type with wall flange fixed in repairs all as specified and directed. Make :Jaquar Cat No FON 40041
Supply and fix Hand shower (Health faucet) with 1 meter long easy flex tube in Chrome finish & wall hook fixed in repairs all as specified and directed. Make : Jaquar Cat No ALD 565
S&F Angle/stop valves 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs all as specified and directed.
S&F PVC connections 15 mm size with PTMT nuts of length 450 mm.
S&F in repairs of Vitreous China wash down water closet pan (pedestal pattern), white including 10 ltrs PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern and Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed
S&F in repairsVitrreous china wash basins, white, flat back, size 550x400mm including brackets, waste fittings, brass, chromium plated 32mm with long screwed shanks and fly nuts, flanged end bedded in red lead cement and other end fixed, with long screwed shanks and fly-nuts, PVC connections pipe of 15mm bore 45cm long and fixed (Minimum weight 15mm 90gms) complete all as specified and as directed.
S & F in repairs Vitreous china Urinal, half stall type, white (Excluding flushing cistern, flush pipe and waste pipe), PVC Connection pipe 15mm bore, 450mm long with PTMT nuts, Push tap of 15mm size any colour high pressure of PTMT screwed for iron pipe and fixed (Minimum weight 15mm-47gms/20mm-75gms), Urinal Spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms).
S&F 20mm dia tubular towel rail brass CP `D`type , 60 cm long between flanges including one pair of brackets all as spcefied.
S & F 75mm dia PVC (SWR) floor trap plain with grating including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B1 all as in repairs specified and directed.
S&F PVC (SWR) pipes 75mm dia, single socketed in any length with rubber ring joints fixed to walls/floor all as specified and as directed.
S&F PVC (SWR) pipes 110mm dia, single socketed in any length with rubber ring joints fixed to walls/floor all as specified and as directed.
S & F 75 mm bore PVC (SWR) bends of any radius with access door.
S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door.
Taking down and removing to or from stores Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame)
S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions and as directed by Engineer-in-Charge.
S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions and as directed by Engineer-in-Charge.
S & F 100 mm long medium weight, cold rolled mild steel Butt hinges.
S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.
S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section
Demolition of Brick or Stone masonry built in cement mortar incl all quions, arches, pillars etc.
M&L for Brick work with sub class 'B' old size bricks straight or curved on plan exc 6M mean radius built in CM 1:6 as in manhole, septic tank , filter bed.
S & F Rotational moulded PVC water storage tanks 500 Ltrs capcity (cylindrical vertical with closed top) three layer hoissted and fixed in position all as specified
S & F in repairs Brass chromium plated shower rose 125mm size with swivel joints fixing to steel pipes etc all as specified and directed.
S&F Soap dish holder Make :JAGUOR Cat No : 35731 or equivalent in Hindware/Cera
Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5 cum, getting out any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm all as specified and directed
M&L for Cement concrete (1:2:4) type B-2 in foundations, filling and mass concrete
M&F for mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes Fe 410-W (Gde-E-250 quality-A) conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.
M&L Plate (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment
S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but not exc 10cm long
S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.
M&L for Preparation of New previously untreated steel surfaces of any description and priming with Red oxide, zinc chrome and applying two coats of synthetic enamel paint over 10cm in width or girth, not otherwise described
M & L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
All as per Item here-in-before but on verticle surfaces.
M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface
M&L for 75mm Cement concrete Type C-2 1:3:6 (40mm graded aggregate) for plinth protection and path complete all as specified and directed.
M&L for Chequered cement concrete tiles 30cm x 30 cm x25mm thick with grey cement and pigment, machine pressed, set jointed and pointed in neat cement slurry in floors over and including 15mm thick cement screed bed in cement and sand mortar 1:6 complete all as specified.
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep & getting out in all type soil complete all as specified.any type of soil
Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out any type of soil.
M&L for PCC 1:4:8 type D-2 (40mm graded aggregate) in foundation filling and mass concrete.
M&L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM1:6
M&L for Formwork to sides of rough finished surfaces of flat concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified.
M&L for use and waste Formwork to sides of pillars, post, stuts, coloumn and stanchirns rough finished surfaces of concrete square, rectangular or polygonal complete all as specified.
M&L for use and wase Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) for fair finished surface.
M&L for use and waste Formwork to rough finished surfaces of sides and soffits of floor or roof beam, beam haunching, lintels, cantilevers, shelves including supports, overhangs etc complete all as specified
M&L TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding mild or securing with clips conform (Fe-410w or Fe-290) as specified.
M&L TMT bars 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding mild or securing with clips conform (Fe-410w or Fe-290) as specified.
M&L Reinforced Cement concrete Nominal Mix, Type B1 1:2:4 (20 mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete
M & L for RCC Nominal Mix, Type B1 1:2:4 (using 20mm graded stone aggregate) for Beams catileveres bressummers, lintels over 1.5m span and similar work complete all as specified and directed
M & L for Damp proof course 40mm thick in cement concrete 1:2:4 type (B-0) to horizontal or vertical surfaces including necessary formwork
Supply only integral water proofing compound
M&L for RCC Nominal Mix, Type B1 1:2:4 (using 20 mm grade stone aggregate) for columns, pillars, piers, posts and struts etc all as specified
M&L for RCC Nominal Mix, Type B1 1:2:4 (using 12.5 mm grade stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
M & L for broken stone or boulders hardcore of gauge exc 63 mm but n.exc. 150 mm, deposited, spread and levelled in layers n.exc. 75mm thick, watered and rolled/rammed to a true surface
M&L for 100mm thick cement concrete type D- 2, 1:4:8 (using 40mm graded aggregate) as in sub base of floor.
M&L for glazed ceramic Coloured tiles 300 x 200 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match.
M&L for rendering 15 mm thick cement plaster on fair surfaces of brick work or concrete surfaces in CM 1:4 finished to even and smooth surfaces in without using extra cement etc complete all as specified and directed.
M&L for rendering 5 mm thick ceiling cement plaster on fair brick work or concrete surfaces in CM 1:4 finished to even and smooth sitfaces in without using extra cement incl.
M&L for preperaing new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer all as specified.
M&L for preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.
M & L for rendering 10mm thick with CM (1:3) on concrete surfaces (on top of roof slab) mixed with water proofing compound as per manufacturer's instructions surfaces finished even and smooth without using extra cement (WPC shall be measured and paid separately)
Supply only Liquid water proofing compound
M & L for cleaning the roof surface and applying oil bond bitumen primer @ 0.2 kg/sqm providing and laying 3mm thick APP modified water proofing membrane weight not less than 4kg/sqm reinforced with non woven polyester mat weighing not less than 160 gm/sqm having soften point not less than 140 degree centigrade tensile strength not less than 800 N/sqcm tearing strength 180N with minimum of 10cm side laps and 15cm end laps by application of torch applying a coat of blown grade hot bitumen over the membrane @ 1.2kg/sqm and providing garnish with solar reflective bitumen aluminium paint @ 0.1 kg/sqm over completed area of membrane complete all as specified and as directed by engineer in charge. Note: the quoted rate shall included for cutting grooves in roof parapets, upward facias, etc and inserting of membrane and making good with CM 1:3 wherever required all as specified and directed.
S&F in repairs 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) all as specified and directed.
S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore pipe all as specified and directed.
M&L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 for 150mm dia pipe.
M&L for SWG drain pipe grade `A` of 150mm internal dia laid in trenches and jointed in cement mortar 1:1 all as specified.
M&L for Brick work with sub class 'B' old size bricks straight or curved on plan exc 6M mean radius built in CM 1:6 as in manhole, septic tank , filter bed.
M&L for PCC (1:2:4) type B-1 using (20mm graded stone aggregate) for benching coping etc incl necessary form work.
M&L for rendering 15mm thick on fair faces of brick works in cm 1:4 finished even and smooth without using extra cement including water proofing treatment complete all as specified .
M&L for Precast reinforced cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate ) for manhole cover , septic tank covers slabs etc including necessary from work and set in CM (1:4) .Note :- reinforcement will measured and paid seperately.
S&F PVC (SWR) junction double,(single T) equal or unequal. 110 mm dia.
S&F PVC (SWR) junction double,(double T) equal or unequal. 110 mm dia with access door.
S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.
S&F PVC (SWR) bend/shoes of 110 mm bore.
Supply and fix alluminium alloy, anodized sliding door bolts 250 mm long with hasp and staple (bolt type) with fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy, ISI marked and fixed complete all as specified and as directed by the Engineer-in-Charge
Supply and fix vitreous china ware wash hand basin 550mm x 400 mm size flat back or angle including new bracket and making good all connections complete all as directed by the Engr-in-Charge.
S&F 32mm Dia PVC waste pipe for sinks or wash basines etc,. in repairs complete all as specified and as directed by the Engr-in-Charge.
Supply and fix 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end complete all as directed by the Engr-in-Charge.
S&F angle valves, cast copper alloy, chromium plated crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and.(15mm bore).
Supply and fix 15 mm bore LDPE pipe 45cm long with brass nuts and washers on both ends all as specified and directed.
Supply and fix Pillar taps 15mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, fancy type with long screwed shanks and fly-nuts, screwed for iron pipe and fixed
Supply and fix in repairs vitreous china squatting pan orissa pattern size 580 mm x 440 mm white with integral foot rests complet in repairs, including provision of concrete bedding all as directed by Engineer-in-Charge.
Supply and fix 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed.
S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) all as specified and directed.
S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) and all as specified and directed.
S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) all as specified and directed.
S&F health faucet with fluxi pipe and hand shower the length of hose 1m fitted to the tap make JAGUOR Code ALD CHR 565 or equivalent in Hindware/Cera.
S&F CP 2 way bib cock, Make JAGUAR Cat No 38041 or equivalent in Hindware/Cera
Returning filling in excavated material any type of soil including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all directed.
Removing surplus excavatet any type of soil to a distance n exc 50 m and deposting where directed at a level n exc 1.5 m above the starting point complete all as directed.
M&L steel ventilator with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and directed.
Dismantling AC corrugated, semi corrugated sheets in roof covering complete all as specified and directed.
S&F Rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates (Fe 410-W Gde-E-250 quality-A).
Dismantling ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets.
S&F 600x600mm GI bottom pre coated exposed snap grid frame work with 25x25x7mm wall angle and 25mm web, 35mm flange 0.7mm thick T-sections hanging with 4mm dia GI wire (up to 1200 mm long) including level clip, soffit cleat and 12.7 mm dia metal Raw plug at 1200mm c/c in both direction including S&F PVC laminated designed (one side PVC lamination and other side aluminium paper) gypsum board 600 X 600 X 8 mm thick tiles decorative type in GI grid frame work with screws or clips etc complete all as specified and as directed by Engineer-in-Charge.
M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4.
M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 , finished even and smooth without using extra cement
Material and labour PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in copings.
M&L for Preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
S& F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts
Dismantling timber scantling 40 Sqcm and over in section incl trusses in any position as in unframed work, complete all as specified and directed.
M&L for one coat creosote oil and preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote.
M&L for preparing new plastered surfaces of walls and applying two coats of distemper oil emulsion including priming plastered and other surfaces with alkali resistent priming paint complete all as specified and as directed.
M&L for 75mm Cement concrete Type C-2 1:3:6 (40mm graded aggregate) for plinth protection and path complete all as specified and directed.
Taking down cement plastering on concrete/ masonary surfaces 40cm wide on along the length of crack including racking out joints hacking for keys and scrubbing down with water, inserting 8mm dia MS TMT bar 300mm long at 300 mm spacing perpendicular to the crack including cost of TMT bar including making groove and grouting the groove with PCC 1:2:4 or with CM 1:3 and replastering the surface with CM 1:4 to match with the surrounding all as specified and as directed the Engineer-in-Charge.
Hacking out old broken glass (any thickness, size,quality or description ) from steel wooden frames, glazed with beads
S&F 3mm thick Sheet glass, ordinary quality fixing with putty/beading in square in each pane.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
M&L for complete removal of existing treatment (upto plaster surface) of old painted surfaces priming plastered and other surfaces with alkali resistant priming paint including 2mm thick wall care putty and applying two coats of distemper oil emulsion on surfaces of walls.
M&L for old surface Complete removal of existing Painting on wall(upto plaster surface) and applying two coat of cement based paint over a coat of primer with alkali resistant priming paint all as specified and as directed.
M&L for preparing old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.
M&L for old painted surfaces wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
S&F Single piece WC with PP soft close seat cover,Hinges,Dual Flush Cistern fitting, Fixing Accessories and Accessories set,Cistern fittings,S trap-300 of size 360 x 640 x 685 mm S trap -220mm Jaguar Cat No SLS-WHT-6851S220PP.
Supply and fix vitreous china ware wash hand basin 470 x 470 x 110mm size Table Top Basin Make JAGUAR Cat No FSS-WHT-29901 or equivalent in Hindware/Cera
Supply and fix Single Lever mini Basin mixer without Popup waste system with 450mm ling Braided Hoses Make JAGUAR Cat No FLR-5025B or equivalent in Hindware/Cera
Supply and fix alluminium alloy, anodized sliding door bolts 250 mm long with hasp and staple (bolt type) with fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy, ISI marked and fixed complete all as specified and as directed by the Engineer-in-Charge
S & F Kristall Trend Corner entry shower enclosure with door with sliding to both sides-4 parts glass 6 mm thick finish -Chrome of size Height 1850 x 1200 x 1200 Jaguar Cat No BKT-CHR-31651200X
S & F wall mixture 3 in 1 system with provision for hand shower and over head shower complete with 115mm long bend pipe,connecting legs &wall flange with hand shower make-Jaguar Cat NO FLR-5281N
S & F in repairs over head shower 105mm dia round shape single flow brass body chrome plated with grey face plate with self cleaning function Make Jaguar Cat No OHS-1709
S&F Soap Dispenser with glass bottle Make -Jaguar cat No-AKP-35735P
S/F CP Angular stop cockwith wall flange 15mm Make: Jaguar Cat No OPP-15053PM
S&F SS toilet paper holder with flap Make: JAGUOR code no. Ahs 1553
S/F Stainless steel towel ring square Make: Jaguar Cat No 35721P
S/F Soap dish holder Make : Jaguar cat No 35731P
S & F towel Rack with lower hanger (stainless steel) with hook Make- jaguar Cat No AHS-1581H
S & F Second class hard wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 13 and not exceeding 25 Sq. cm
S&F of 18mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on only one face; fixed with screws
M&L external teak wood lipping, 6mm thick fixed with nails 18 mm thick all as specified and directed
M&L for 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions
S&F of 75 mm Brass barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed
S&F of 100 mm long chromium plated brass handles fancy type all as specified and directed
S&F of Cup board lock brass 4 levers all as specified and directed
S&F of Stainless steel auto closing cup-board hinges
S&F chromium plated heavy duty coat hook having 2 nos of hooks fixed the existing door with necessary screws etc. Make: 35761 Jaquar or equivalent in Hindware/ Cera
M&L for Granite(of any type) work (table rubbed and polished) of 20 mm th in steps, jambs, pillars, window- cills,cooking platforms and like over cement mortar including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade
Providing edge moulding to 18-20mm thick Granite stofne any description stone of counters vanities etc. including machine polishing to edge to give high gloss fininsh etc, complete.
S&F Anodised aluminium framework for wall pannel including joining cleat for fixing etc.The extruded pre fabricated frame work shall be fixed to the wall with M.S brackets and screws complete all as specified
S&F Aluminium composite panel as per manufacturer specifications for the interior finishing job. ACP of approved make(Alstrong , Aludecor, Eva bond or approved equivalent) of over all thickness is 4 mm with aluminium skin of 0.25mm on both sided,centre LDPE core material of thickness 4 mm.The complete material shall be confirming to ASTM standards for its various mechanical and physical properties. The panel shall be cut into match the grid size in required length and width as per the site condition,tampered & formed using router machine/curved using standard rolling machine, without leaving heavy marks on the sheet,so as to form a tray. The gap formed in between the panel shall be sealed with siliconsealant of Alstone WS600 or equivalent after fixing the required masking tape and all other accessories.The sheet fixing and applying of sealant shall be in line and level to the building line. The panel colours will be as specified by engineer in charge
M&L Anodised aluminium snap grid frame work for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including M&L Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid 8 mm thick including applying two coats of oil bound distemper over a coat of alkali resistant primer on exposed surfaces of ceilings complete all as specified all as specified complete all as specified and as directed by Engineer- In- Charge
Preparing old plastered surfaces of wall by Washing, rubbing down and stopping of distempered and painted surfaces by applying one coat of OBD all as specified and as directed.
Preparation of old painted Surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetc enamel paint all as specified and as directed
M&L Cement concrete type E2 1:5:10 (40mm graded aggregate) in foundations, filling and mass concrete all as specified
M & L 40 mm thick PCC 1:2:4 type B1 (Using 20 mm graded granite stone aggregate) in sub base of floorings all as specified.
S&F15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed
S/F in repairs Angle stop valve 15mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed
S & F Chromium plated two way bib cock with flanges. Make: Parryware Cat NoT3534A1
S & F Towel Rail 20mm dia, 600mm long of brass chromium plated fixed and including brackets one pair Chromium plated
S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S&F in repairs glass shelf corner assembly consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing
S&F counter sunk wash basin white . Make: Jaquar CAT No : FNS-WHT-40701 Under Counter Basin with Fixing Accessories,Size: 605x410x200 mm,Shape: Rectangular
S&F PVC connection 15 mm size with PTMT nuts of length 450 mm
S&F Towel Ring Square chromium plated Make: Jaquar, CAT No : ACN-CHR-1121N TOWEL RING SQUARE WITH ROUND FLANGE - CHROME
S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms)
S & F in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed."
Brickwork with flyash bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 old size of bricks.
M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for slabs including necessary form work and set in CM (1:4).
Complete removal of existing surfaces of ceilings,and applying plaster of paris putty of 1 mm thickness over ceiling surface to prepare the surface even and smooth over a coat of alkali resistant primer and applying two coat of OBD all as specified and as directed.
S&F in repairs vitreous china wash down water closet pedestral pan white/ coloured, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythene of loe or high density or PVC 32 mm dia, Plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.
S&F Brass Made Automatic Urinal Flush Sensor
S&F Extruded brass handles, fabricated type polished 75mm long all as specified and directed
S&F Hasp and staple,75mm safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.
M&L for Aluminium frame for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. including Powder Coating (minimum thickness of powder coating 50 micron) complete all as specified
M&L for Aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including Powder Coating (minimum thickness of powder coating 50 micron) complete all as specified
M&L for Sheet glass, 5.5mm thick ordinary quality and glazing with rubber in square exc 0.5 sq. m in each pane complete all as specified
M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination & fixed with screws complete all as directed.
M&L for brass Mortice lock 4 levers vertical type, size 100 mm complete all as directed.
M&L for Door closer hydraulically regulated, designation No. 3,aluminium extruded section body universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as directed.
Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches with board, ceiling roses, pendents, bell, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good disturbed surfaces of walls, floors etc. including paint touch up to match with the existing surface complete all as specified and as directed by the Engineer-in-charge.
Taking down unserviceable MCB DBs, Metal clad DBs along with MCBs of any description and making good the disturbed surfaces of walls to match with existing sorrounding wall finish complete all as specified and as directed by the Engineer-in-charge.
M&L Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable, with multi-stranded copper conductor cable, 1100 volts grade, drawn through and including non metalic medium grade, rigid PVC conduit with all conduit accessories (including concealing in any type of wall and finishing to match with the sorroundings), provision of 1.5 sq mm PVC insulated copper cable FRLS as earth continuity conductor, company fabricated GI sheet steel terminal box suitable for Modular switches concealed flush to walls with front cover & base frame, screws, suitable for housing modular switches, socket outlets, fan regulators etc, all as specified and as directed for the following:-
(a) One light point controlled by one one way switch .
(c) One ceiling fan point controlled by one one way switch.
(e) One 3 pin socket outlet 5 Amps on the same board with other switches.
(f) One 3 pin socket outlet 5 Amps on the Independent board.
All as per item here-in-before but with 4.0 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor complete all as specified and as directed by the Engineer-in-charge.
M&L for Modular switch 6A, 1 way. Make :Anchor/ Havells/ Legrand/ Crabtree
M&L for Modular switch 16A, 1 way. Make :Anchor/ Havells/ Legrand/ Crabtree
M&L for Socket outlet 6A modular. Make :Anchor/ Havells/ Legrand/ Crabtree
M&L for Socket outlet 16A modular. Make :Anchor/ Havells/ Legrand/ Crabtree
M&L for Stepped type fan regulator(4steps), 120 W-2 modular. Make :Anchor/ Havells/ Legrand/ Crabtree
S&F ceiling rose, 3 terminal, PVC/Polycarbonate isolated body. Make :Anchor/ Havells/ Legrand/ Crabtree
Supply and fixing LED luminaire 2'x2', 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for False roof ceiling as required including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by the Engr-in-charge. Make : Havells, LHEWEBP7IN1W042 'OR' equivalant in Phillips / CG.
M&L for Taking down ceiling fan and refixing the same of any description, sealing cable ends, dismantling blades, cleaning all dust, applying grease, filling cavaties with fillet, including reassembling blades and hanging ceiling fan and connecting up including provision of cable from ceiling rose to connector of fan all as specified and as directed by the Engineer-in-charge.
Dismantle the unserviceable rubber bush with clamping set, supply and fix rubber bush with clamping set, GI bolt, nut and split pin complete all as specified and as directed by the Engineer-in-charge.
M&L Pumping down the AC, taking down carefully the indoor units along with voltage stablizer of split type air conditioner of capacity upto 2.0 TR by disconnecting all electrical connections, suction and discharge lines from its installed positionand Re-installing the indoor and outdoor units alongwith stablizer at same location after wooden wall paneling and connecting all the electrical connections, suction and discharge lines as required and testing on completion for proper functioning complete all as specified and directed by the Engr-in-Charge.
M&L Sub main wiring complete with two runs of 6.0 Sqmm single core PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable with one run of 6.0 Sqmm single core, PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable as earth continuity conductor, drawn through and including suitable size of non-metallic rigid PVC conduit and conduit accessories concealed in any type of wall including stone masonry, floors / fixed to ceiling etc. all as specified and as directed. NOTE: Two runs of 6.0 sqmm cable conductor, one run of 6.0 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length.
Supply and fix MCB distribution board sheet metal powder painted Single pole & Neutral enclosre with a two pin and earth plug and socket, one single pole MCB of 20 Amps complete including taking down existing DB sheet metal including MCB all as specified and as directed by the Engineer-in-charge, including taking down unserviceable complete all as specified and as directed. Make-Havells/Legrand/Schneider
M&L for Point wiring complete with 1.5 sq mm single core PVC insulated FRLS cable, with multi standard copper conductors, 1100 volts grade, drawn thorough and including non metalic, med. grade rigid PVC conduit with all conduit accessories (including concealing and finising to match with the sorroundings) and including provisoin of 1.5 sq mm PVC indulated copper cable FRLS as earth continiuty conductor, fabricated steel teminal box made of MS sheet concealed in walls and cover with 3 mm thick hylum sheet for fixing switches, socket outlets, fan regulators etc, all as specified and directed
(a) One light point controlled by one way switch.
(b) One ceiling fan/ exhaut fan point controlled by one one way switch.
(c) One 3 pin socket outlet 5 Amps on the Independent board.
All as per item here-in-before but with 4 Sqmm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4 Sqmm copper conductor green in colour as earth continuity conductor, complete all as specified and directed.
S&F Switch piano flush type, single pole one way 5 Amps 240 volts, complete all as specified and directed.
Supply and fix Switch socket combination 2 in 1, 5 Pin, 5 Amps flush type, complete all as specified and directed. Make-Legrand/ Crabtree / Anchor / Havells
Supply and fix Switch socket combination, 3 pin, 5 and 15A, 5 in 1 flush type, complete all as specified and directed. Make-Legrand/ Crabtree / Anchor / Havells
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete
M&L for Taking down exhaust fan of any description, sealing cable ends, dismantling blades, cleaning all dust, applying grease, filling cavaties with fillet, getting reapir the fan and replacing the winding/bearing/capacitor of suitable size if required, including reassembling blades and fixing exhaust fan and connecting up including provision of cable from ceiling rose to connector of fan, complete all as specified and directed.
Supply and fix louvers/shutters made of galvanised sheet to open and close opening/hole made for exhaust fan of size 300 mm dia automatically
Supply & fix MCB DB SPN 4 way 240 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works.
Supply & fix following item including necessary connection in incoming and outgoing complete all as specified :-
(a) MCB SP 6 to 32 Amps 'C' Curve
(b) MCB SPN 16 Amps 'C' Curve
(c) MCB SPN 32 Amps 'C' Curve
(d) MCB SPN 40 Amps 'C' Curve
Material and Labour for Submain wiring with 6 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through & including PVC Conduit pipe 20 mm dia with all fittings complete including taking down old unserviceable submain wiring complete all as specified and directed. Note:- 6 runs of cable and one run of earth wire and one run of PVC conduit will be measured as one unit.
Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth and getting out in soft/loose soil for laying of under ground cable and foundation of poles.etc complete as specified and as directed.
Returning filling in including spreading, leveling watering and well ramming in layers not exceeding 25 Cm thick .etc complete as specified and as directed.
Supply and laying Pipe galvanised steel tubing medium Gread class screwed socket jointing including all Fittings such as bend, elbows, tees, short piece jointer,connector,back nut, cap etc of Size 20 mmdia complete all as specified and directed.
Supply and Fix Stop valves, cast copper alloy,screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
Supply and fixing Ball brass valves of size 20mm dia , high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified.
M&L cutting of GI Pipe upto 50 mm dia in Position for insertion of new TEE, Supply and fixing of Union and Tee Reducer of required size dimention and reconnecting the main water supply line with all required fittings complete all as directed by Engr-in-Charge.
Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as directed by Engr-in-Charge
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 sq. mm nominal cross section stranded conductor 2 core in service connections complete including necessary earth work, sand cushioning, PCC cable cover, provision of G.I. pipe under roads, floor, on wall complete all as specified and directed
Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 2.5 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 2.5 Sqmm drawn through & including PVC Conduit pipe 20 mm dia with all fittings complete all as specified and directed. Note:- 2 runs of cable and one run of earth wire and one run of PVC conduit will be measured as one unit.
Supply and fix Single Pole & Neutral Metal clad enclosure with a two pin and earth plug and socket including one single pole MCB of 20 Amps in repair complete all as specified and as directed by Engineer-in-Charge
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 ltrs, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, Connection pipe etc.
S&F GI tubes, medium grade fixed complete to wall and ceiling or laid in floor of size 15mm with all fittings and fixing complete including necessary excavation, clips, wall hooks, wooden plugs etc and fitting with existing pipe line of any size complete all as specified
Supply and fix 15mm bore stop valve fancy type, chorimum plated down high pressure, with or without leetterd Hot or Cold , screwed for 15mm , iron pipe all as specified and as directed. Make : Jaquar ( ESSCO)/Soma/Leader/Zoloto
Supply and fix, fancy type, 15mm bore chromium plated bib taps, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for bass ferrule, fancy type all as specified and as directed. Make : Jaquar ( ESSCO)/Soma/Leader/Zoloto
S&F PVC connection pipe of size 15 x 450mm complete with PTMT nuts complete all as specified and directed.
Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through & including PVC Conduit pipe 20 mm dia with all fittings complete all as specified and directed.
Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through & including PVC Conduit pipe 20 mm dia with all fittings complete including taking down old unsv aluminium submain wiring complete all as specified and directed
VACON INFRASTRUCTURES
SURA INFRASTRUCTURE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .