REPAIR/ MAINT OF SECURITY AND STREET LIGHTS IN DOMESTIC AND TECHNICAL AREA AT AF STN SONEGAON, NAGPUR

Supply and fixing in repair of LED driver, including taking down street light from pole and re-fixing after repair of FWG capacity driver, complete all as specified and directed.

LED fittings 70 watt driver.

LED fittings 80 watt driver.

LED fittings 150 watt driver.

LED fittings 200 watt driver.

LED fittings 20 watt driver.

M & L for boring of holes under road, pavement, hard standing by trenches technoligy using sounding technique and necessary machine including HDPE pipe of 150mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.

Supply and laying GI pipe Light grade (ISI marked) 50mm bore with connecting accessories, laid under road/ drain/fixed on wall etc for protection of cables complete all as specified and directed.

Supply, laying, Testing and Commissioning cable XLPE insulated aluminium conductor, stranded, armoured, PVC sheathed, LT 1100 Volt grade, heavy duty as per IS-7098 and providing suitable lugs and cable glands, laid in trenches/ ducts/fixed to wall/ roof/ poles including taking down existing cables complete all as specified and directed of following sizes: -

50 sqmm, 3.5 core.

25 sqmm, 3.5 core.

16 sqmm, 4 core.

10 sqmm, 2 core.

M & L for writing Pole No. on PCC/Steel poles with white synthetic enamelled paint on black background, size of letter shall be 50 mm or less complete all as specified and directed.

S & F in replacement of LED street light fittings with surge protector & Die cast aluminium housing with IP65 protection with LED as symmetric for 70 Watt inclusive of LED lamp & suitable capacity of control gear box/driver and suitable flexible wiring with 0.5 Sqmm PVC insulated copper cable through and including fixing on pole with suitable MS flat iron bracket or GI pipe in angle complete all as specified and directed.

S & F in replacement of LED Flood light fittings with surge protector & Die cast aluminium housing with IP65 protection with LED as symmetric for 200 Watt inclusive of LED lamp & suitable capacity of control gear box/driver and suitable flexible wiring with 0.5 Sqmm PVC insulated copper cable through and including fixing on pole with suitable MS flat iron bracket or GI pipe in angle complete all as specified and directed.

S & F in replacement of LED Flood light fittings with surge protector & Die cast aluminium housing with IP65 protection with LED as symmetric for 80 Watt inclusive of LED lamp & suitable capacity of control gear box/driver and suitable flexible wiring with 0.5 Sqmm PVC insulated copper cable through and including fixing on pole with suitable MS flat iron bracket or GI pipe in angle complete all as specified and directed.

S & F in replacement of LED Industrial LED high bay along with surge protector & Die cast aluminium housing with IP66 protection with LED as symmetric for 150 Watt inclusive of LED lamp & suitable capacity of control gear box/driver and suitable flexible wiring with 0.5 Sqmm PVC insulated copper cable through and including fixing on pole with suitable MS flat iron bracket or GI pipe in angle complete all as specified and directed.

Rectification of cable faults including provision of straight through cable joint LT heat shrink type for cable of size 70 Sqmm 3.5 core complete all as specified and directed.

All as per Item No. 11.00 above but for cable size 95 Sqmm 3.5 core.

All as per Item No. 11.00 above but for cable size 35 Sqmm 3.5 core.

All as per Item No. 11.00 above but for cable size 25 Sqmm 4 core.

M & L for painting of Steel tubular poles of any size with two coats of aluminium paint including painting to cross arms and clamps etc. including preparation of surfaces by scrubbing and cleaning with wire brush and renumbering the existing number of the pole as existing complete all as specified and directed. Note: - The rate quoted by the contractor shall incl the rate for supply and fixing of radium sticker/strip of make 3M or equivalent 5cm width around the steel tubular poles for 3 layear of red colour incl lapping upto 2.5cm incl best quality adhesive material applying on overlapping.

M & L for painting of Steel tubular poles of any size with one coat of red oxide primer and two coats of aluminium paint including painting to cross arms and clamps etc. including preparation of surfaces by scrubbing and cleaning with wire brush and renumbering the existing number of the pole as existing complete all as specified and directed. Note: - The rate quoted by the contractor shall include the rate for supply and fixing of radium sticker/strip of make 3M or equivalent 5cm width around the steel tubular poles for 3 layers of red colour including lapping upto 2.5cm including best quality adhesive material applying on over lapping.

M & L for sub main wiring with 2 run of 1.5 sqmm (Nominal cross sectional are) PVC insulated unsheathed single core flame retardant low smoke cable (FRLS) of working voltage 1100 volts grade with stranded copper conductor including one run of 1.5 sqmm (Nominal cross sectional area) PVC insulated unsheathed flame retardant low smoke cable (FRLS) with stranded copper conductor as continues earth wire connect with street light with junction box and including 20mm dia PVC rigid non-metallic conduit after and including taking down / dismantling old sub main wiring including old conduit /casing capping /wooden batten etc. of any description complete all as specified and directed. Note: - 3 Run of 1.5 Sqmm copper wire and 1 Run of PVC pipe 20mm measured as 1RM

M & L for scrapping down rusted, Electrical LT panel including rail/channel of base using mechanical scrapers, brushes, sand paper etc and removing the old paint to the complete outer surfaces and repainting external surfaces with black/yellow (strip) colour with applying a coat of red oxide primer on the both internal & external portion where base metal is exposed, painting spray one coat of synthetic enamel paint for outdoor type panel including MCCB's specific cabinet complete all as specified and directed.

S & F MCB TPN 415 volts 63 Amp AC with necessary connection in existing panel/DB BOX complete all as specified and directed.

S & F MCB DP 240 volts 40 Amp AC with necessary connection in existing panel/DB BOX complete all as specified and directed.

S & F MCCBs four pole 415 volts. 16 KA, 100 Amp AC thermal based fixed type in existing panel board with modification /fabrication of existing panel boards complete all as specified and directed by E-in-Charge.

S & F Thermo plastic cable looping boxes, factory made, IP 65 sheet of size 200 x 160 x 98mm separate detached gland plate and including MCB TPN 20 Amps and Bakelite connector 4 way 20 Amp with din rail, weather vermin proof, front door opening with hinge and locking arrangement fixed to pole complete all as specified and directed.

S & F in replacement Automatic street light Switch three phase max load 8-12 KW for automatic switching OFF street light at 30 Lux level and switching ON at 10 Lux of natural light the sensor along with suitable power Contactors of rating 32 Amps per Phase, MCB 40 Amps TP -01 No should be enclosed in pole/ wall mountable enclosure made of Rust proof, Electric shock proof, Termite proof and FR grade enclosure conforming to IP54. The contactors, MCBs and circuit wiring should suitable enough to take load of 25 KW equally distribution over three phase 415 Volts A/C complete all as specified and directed.

Supply and fix Double wall Corrugated High Density Polymer Ethyl (HDPE) pipe of size 50mm outer diameter and 38 mm inner Diameter for laying of Electric cable with IS 14930 (part 2) 2001 and 6 mm thickness laid in trenches, wall, floor , pole including bends, sockets and other connected accessories complete all as specified and directed by Engineer- in -Charge.

S & F Double Wall Corrugated High Density Polymer Ethyl (HDPE) pipe of size 63mm outer diameter and 50 mm inner Diameter for laying of Electric cable with IS 14930 (part 2) 2001 and 6 mm thickness laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and directed by Engineer- in -Charge.

S & F LED bollard in cylindrical shape with opal acrylic and IP66 protection complete all as specified and directed. Make: - Cat Part No BGBOL6059WLEDWW/WH or equivalent in Havells/Philips

S & F bracket for street light fittings made out of 40 mm dia GI pipe of light grade 1.5 m long each bent to shape & size required & fixed to pole with and including flat iron clamps 02 Nos made out of 30 x 5 mm flat iron including GI Nuts, bolts and washers and painting of clamps and street light brackets with two coat of aluminium paint over a coat of red oxide primer and fittings bracket to street light fitting including taking down old unserviceable bracket of any shape and size complete all as specified and as directed by Engr-in-Charge.

Excavation in trenches not exc. 1.5 meter wide and not exc 1.5 meter in depth and getting out in any type of soil for laying of cable, pipe etc., complete all as specified and directed.

Returning filling in and including spreading, levelling, watering and well ramming in layers not exc. 25cm thick, complete all as specified and directed.

Removal of excavated materials to a distance not exc. 50 meter and depositing where directed at a level not exc. 1.5 meter above the starting point complete all as specified and as directed.