Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.2 CrAccepted-AOC GUWAHATI | KAMRUP | ASSAM | 781030 | ₹11.2 Cr Quoted ₹11.7 Cr | L1 | Accepted-AOC Accepted |
| 2 | L2₹11.9 CrRejected-Finance | ₹11.9 Cr | L2 | Rejected-Finance Rejected |
| 3 | Rejected-Technical | - | - | Rejected-Technical Rejected |
Tender Value
₹11.1 Cr
EMD Value
₹21.1 L
Closing Date
13 Apr 2023, 12:00 pmClosed
Executive Engineer I
PDA Complex North AOC Imphal - 795001.
Development of Leishang Hiden Eastern Side, Phase-I
2023_PDA_2153_1
No. EE-I-PDA/N.I.T./2022-23
Open Tender
Civil Works
365 days
As Per Tender Document
Please refer Tender documents.
4 documents required · 4 mandatory
₹5,000
The Planning and Development Authority Manipur.
₹21.1 L
30 Jan 2025
29 Mar 2023
13 Apr 2023
29 Mar 2023
13 Apr 2023
30 Mar 2023
Amount
Construction of Pathway
Earthwork in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains(not exceeding 1.5m in width or 10 sqm on plan) including getting out and disposal of excavated earth,lead upto 50m and lift upto 1.5m,as directed by the Engineer -in- Charge. a) All kinds of soil.
Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm.in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre.
Providing, laying and compacting Granular base/sub-base with naturally occuring Sand Gravel Material free from organic ore other deleterious constituent spreading with Motor Grader and compacted by rolling with power roller of 8 to 10 tonne capacity in layers not exceeding 150mm (spread thickness).
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level: a) 1:4:8 ( 1 Cement : 4 coarse sand ; 8 graded stone aggreagate 40 mm norminal size )
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level: a) 1:2:4 ( 1 Cement : 2 coarse sand ; 4 graded stone aggreagate 20 mm norminal size )
Providing and laying cement in position specified of reiforsed cement concrete excluding the cost of centering,shuttering,finishing and reinforcement-All work upto plinth level: -1:1.5:3 ( 1 Cement : 1.5 coarse sand : 3 graded stone aggreagate 20 mm norminal size )
RCC work in beams, suspended floors, roofs having slope upto 15" landing, balconies, shelves,chajjas,lintels, bands, plain window sills, staircases and spiral staircases above plinth level upto floor five level, excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).
Reinforcement for RCC work including straighting cutting bending placing in position and binding all complete. Above Plinth level. Thermo-Mechanically Treated bars.
Brick work with 1st class common burnt clay F.P.S. ( non modular ) brick in foundation and plinth in : Cement mortar 1:4 ( 1 cement : 4 fine sand )
Centering & shuttering including, strutting and propping etc. and removal of form for : a)Foundation Footings, bases of coloumn etc. for. mass concreate.
(b) Lintels beams, plinth beams, girders, bressumers and cantilevers, with water proof ply 12mm thick.
12 mm cement plaster of mix 1:4 ( 1 Cement : 4 fine Sand )
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.a) Water bthinnable cement primer.
Finishing walls with Deluxe Multi surface paint system for interiors and exterior using Primer as permanufacturers specifications.Two or more coats applied @1.25ltr/10sqm. over and including one coat of Special primer applied @0.75ltr/10sqm.
Providing and lying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction of approved size design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand filling the joints with line sand etc. all complete as per the direction of Engineer -in -charge.
Construction of Cycle Track
Earthwork in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains(not exceeding 1.5m in width or 10 sqm on plan) including getting out and disposal of excavated earth,lead upto 50m and lift upto 1.5m,as directed by the Engineer -in- Charge. a) All kinds of soil.
Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm.in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre.
Providing, laying and compacting Granular base/sub-base with naturally occuring Sand Gravel Material free from organic ore other deleterious constituent spreading with Motor Grader and compacted by rolling with power roller of 8 to 10 tonne capacity in layers not exceeding 150mm (spread thickness).
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level: a) 1:4:8 ( 1 Cement : 4 coarse sand ; 8 graded stone aggreagate 40 mm norminal size )
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level: a) 1:2:4 ( 1 Cement : 2 coarse sand ; 4 graded stone aggreagate 20 mm norminal size )
Providing and laying cement in position specified of reiforsed cement concrete excluding the cost of centering,shuttering,finishing and reinforcement-All work upto plinth level: -1:1.5:3 ( 1 Cement : 1.5 coarse sand : 3 graded stone aggreagate 20 mm norminal size )
RCC work in beams, suspended floors, roofs having slope upto 15" landing, balconies, shelves,chajjas,lintels, bands, plain window sills, staircases and spiral staircases above plinth level upto floor five level, excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).
Reinforcement for RCC work including straighting cutting bending placing in position and binding all complete. Above Plinth level. Thermo-Mechanically Treated bars.
Brick work with 1st class common burnt clay F.P.S. ( non modular ) brick in foundation and plinth in : Cement mortar 1:4 ( 1 cement : 4 fine sand )
Centering & shuttering including, strutting and propping etc. and removal of form for : a)Foundation Footings, bases of coloumn etc. for. mass concreate.
(b) Lintels beams, plinth beams, girders, bressumers and cantilevers, with water proof ply 12mm thick.
12 mm cement plaster of mix 1:4 ( 1 Cement : 4 fine Sand )
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.a) Water bthinnable cement primer.
Finishing walls with Deluxe Multi surface paint system for interiors and exterior using Primer as permanufacturers specifications.Two or more coats applied @1.25ltr/10sqm. over and including one coat of Special primer applied @0.75ltr/10sqm.
Providing and lying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction of approved size design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand filling the joints with line sand etc. all complete as per the direction of Engineer -in -charge.
Planter Box
Supplying and filling in plinth with sandy soil under floors including, watering, ramming consolidating and dressing complete.
Providing, laying and compacting Granular base/sub-base with naturally occuring Sand Gravel Material free from organic ore other deleterious constituent spreading with Motor Grader and compacted by rolling with power roller of 8 to 10 tonne capacity in layers not exceeding 150mm (spread thickness).
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level: a) 1:4:8 ( 1 Cement : 4 coarse sand ; 8 graded stone aggreagate 40 mm norminal size )
Providing and laying cement in foundation and plinth 1:2:4 ( 1 Cement : 2 coarse sand ; 4 graded stone aggreagate 20 mm norminal size )
Half brick work masonry 2nd class ( local class ) in cement mortar 1:4 ( 1 Cement : 4 coarse ) in superstructure.
12 mm cement plaster of mix 1:4 ( 1 Cement : 4 fine Sand )
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.a) Water bthinnable cement primer.
Finishing walls with Deluxe Multi surface paint system for interiors and exterior using Primer as permanufacturers specifications.Two or more coats applied @1.25ltr/10sqm. over and including one coat of Special primer applied @0.75ltr/10sqm.
Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms,vanity counters,window sills,facias and similar locations of required size of approved shade,colour and texture laid over 20mm thick base cement mortor 1:4 ( 1 cement :4 coarse sand ) with joints treated with white cement,mixed with matching pigment,epoxy touch ups,including rubbing,curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade , Area of slab upto 0.50 sqm.
Kota stone slabs 25 mm thick in risers, skirting, dado and pillars laid on 12 mm(average) thick cement mortar 1:3(1 cement :3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
Iron Grill Fencing with two nos. of Gate on the Eastern Side,Stainless steel Railing on the Western Side, Cast Iron Benches,Stainless Steel Dustbins & Signage :
Earthwork in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains(not exceeding 1.5m in width or 10 sqm on plan) including getting out and disposal of excavated earth,lead upto 50m and lift upto 1.5m,as directed by the Engineer -in- Charge. a) All kinds of soil.
Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm.in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level: a) 1:4:8 ( 1 Cement : 4 coarse sand ; 8 graded stone aggreagate 40 mm norminal size )
Providing and laying cement in position specified of reiforsed cement concrete excluding the cost of centering,shuttering, finishing and reinforcement - All work upto plinth level: -1:1.5:3 ( 1 Cement : 1.5 coarse sand : 3 graded stone aggreagate 20 mm norminal size )
RCC work in walls (any thickness ), including attached pilasters, buttresses, plinth and string courses,fillets,columns,pillars,piers,abutments, posts and struts etc above plinth level .upto floor five level excluding cost of centering,shuttering,finishing and reiforcement: 1: 1.5 : 3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20 mm nominal size)
RCC work in beams, suspended floors, roofs having slope upto 15" landing, balconies, shelves,chajjas,lintels, bands, plain window sills, staircases and spiral staircases above plinth level upto floor five level, excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).
Steel Reinforcement for R.C.Cwork including straightening,cutting,bending, and placing in position and binding all complete TMT bars.
Centering & shuttering including, strutting and propping etc. and removal of form for : a)Foundation Footings, bases of coloumn etc. for. mass concreate.
(b) Lintels beams, plinth beams, girders, bressumers and cantilevers, with water proof ply 12mm thick.
(c)Columns,Pillars,Pillars,Piers,Abutments,Posts and Struts.
Brick work with 1st class common burnt clay F.P.S. ( non modular ) brick in foundation and plinth in : Cement mortar 1:4 ( 1 cement : 4 fine sand )
Steel work weided in built up section / framed work i/c cutting hoisting,fixing in position & applying a priming coat of approved steel primer using steel etc.as requiredred. In gratings,framed guard bars, ladders,railing, brackets,gates and similar works.
Providing and fixing stainless steel (Grade 304) railing made of Hollow tube,channels, plates etc, including welding, grinding,buffing, polishing and making curvature (wherever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasterers etc.)
Providing & Fixing Arrow Head
12 mm cement plaster of mix 1:4 ( 1 Cement : 4 fine Sand )
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.a) Water bthinnable cement primer.
Finishing walls with Deluxe Multi surface paint system for interiors and exterior using Primer as permanufacturers specifications.Two or more coats applied @1.25ltr/10sqm. over and including one coat of Special primer applied @0.75ltr/10sqm.
Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works.
Painting Steel work with Deluxe Multi Surface Paint to give an even shade, Two or more coat applied @ 0-90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.
Cast Iron benches i/c fitting
Stainless steel dustbin with frame ((80l)
Signage
Pergola:
Earthwork in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains(not exceeding 1.5m in width or 10 sqm on plan) including getting out and disposal of excavated earth,lead upto 50m and lift upto 1.5m,as directed by the Engineer -in- Charge. a) All kinds of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level: a) 1:4:8 ( 1 Cement : 4 coarse sand ; 8 graded stone aggreagate 40 mm norminal size )
Providing and laying cement in position specified of reiforsed cement concrete excluding the cost of centering, shuttering, finishing and reinforcement-All work upto plinth level: -1:1.5:3 ( 1 Cement : 1.5 coarse sand : 3 graded stone aggreagate 20 mm norminal size )
Reinforcement for RCC work including straighting cutting bending placing in position and binding all complete. Above Plinth level. Thermo-Mechanically Treated bars.
Steel work in built up tubular ( round , square or rectangular hollow tube section ) trusses etc. Including cutting hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc.complete. Electric resistance or induction butt welded tubes.
Steel work weided in built up section / framed work i/c cutting hoisting,fixing in position & applying a priming coat of approved steel primer using steel etc.as requiredred. In string, treads, landing etc. og stair cases including use of chequered plate wherever required,all complete.
Providing & fixing M.S bolts of sizes with nuts & washers complete.
Centering & shuttering including, strutting and propping etc. and removal of form for : a)Foundation Footings, bases of coloumn etc. for. mass concreate.
Painting Steel work with Deluxe Multi Surface Paint to give an even shade, Two or more coat applied @ 0-90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.
Drain
Earthwork in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains(not exceeding 1.5m in width or 10 sqm on plan) including getting out and disposal of excavated earth,lead upto 50m and lift upto 1.5m,as directed by the Engineer -in- Charge. a) All kinds of soil.
Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm.in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level: a) 1:4:8 ( 1 Cement : 4 coarse sand ; 8 graded stone aggreagate 40 mm norminal size )
Providing and laying cement in position specified of reiforsed cement concrete excluding the cost of centering,shuttering,finishing and reinforcement-All work upto plinth level: -1:1.5:3 ( 1 Cement : 1.5 coarse sand : 3 graded stone aggreagate 20 mm norminal size )
Reinforcement for RCC work including straighting cutting bending placing in position and binding all complete. Above Plinth level. Thermo-Mechanically Treated bars.
Centering & shuttering including, strutting and propping etc. and removal of form for : a)Foundation Footings, bases of coloumn etc. for. mass concreate.
Arboriculture
Filling with sandy soil under floors i/c watering, ramming, consolidating and dressing complete.
Land preparation i/c digging revarbed soil in the ratio 1:2 and filling pet and compecting.
Plantation of different types of ornamental plants i/c watering application of manure and fertilizer, ppchemicals, weeding list of the plants are given below
a) Royal bottle plant
b) Raphis plam
c) Golden pine
d) Variculed bromolate
e) Petunia, azalia, spider plant, cry santhimum dwraff
f) Narium
Local Grass fixation (Including labour laoding &Unloading
Pipe fitting
P/F Chlorinated polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints as per direction of Engineer in Charge. (External work ) a)25 mm OD
b)15 mm OD
P/F 3 layer PP-R(poly propylene random copolymer) pipes SDR 7.4 UV stabilized & anti-microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c fixing the pipe the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer in Charge. (External work ) a)PN-pipe, 40 mm OD
P/F brass bib cock of approved quality of 20 mm nominal bore.
P/F brass full way GM valve with CI wheel of approved. (a) 25 mm diameter.
P/F water pump of approved brand.
Compound Lighting
Wiring for circuit/sub-main wiring along with earth wire with (the following size of) FR PVC insulated copper conductor single core cable in surface / recessed PVC coduit etc. as reqd.
9. 4x4mm2 + 2x4mm2 earth wire.
Supply & drawing 2 x2.5 mm of FR PVC insulated copper single core cable in existing surface / recessed steel / PVC conduit as reqd.
P/F 5 amp. to 32 amp. rating 230V 'B' series MCB for lighting and other load of single pole in the existing MCB DB complete with connection testing and commissioning etc. as reqd.
Supply of 16mm2 4-core PVC/XLPE insulated heavy duty armoured cable 1.1KV grade.
Supply of 35mm2 2-core PVC/XLPE insulated heavy duty armoured cable 1.1KV grade.
Supply of 70mm2 4-core PVC/XLPE insulated heavy duty armoured cable 1.1KV grade.
Laying of 1 no. PVC insulated PVC sheathed power cable of 1.1KV grade of size not less than 25mm2 but not exceeding 120mm2 direct in ground i/c excavation, sand cushioning, protective covering and re-filling the trench etc. as reqd.
Earthing with Copper earth Plate 600mmx600mmx6mm thick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as reqd.
Extra for using salt and charcoal for G.I. or copper plate earth electrode as reqd.
P/F earth bus of 25mmX5mm copper strip on surface or in recess for connection etc as reqd.
Providing and Fixing non metallic pole box of size 250mm x 200mm x 105mm (product code GSJB2520) with side openable hinged cover complete with two strip alumium bus bar of 100 amps capacity mounted on DMC bus support and 1 no. of SPMCB of 6 amps "C" series capacity with din rail on the existing street light pole with the help of two nos. MS clamps of suitable size including making hole to insert the cable and dismantling the worm out MS box etc complete as required.
Providing and Fixing Cylidrical shape LED Bollart light i/c connection etc as reqd.
S/F of Cast Iron pole weight 450kg i/c erection commisioning..
Providing 46-50mm dia. DWC HDPE pipe for cable laying between pole to pole/pole to Distribution box/Distribution box to source.
Providing and Fixing of 16mm dia. Thimble.
Providing and Fixing of 35mm dia. Thimble.
Providing and Fixing of 70mm dia. Thimble.
Providing of earthing for each street light pole shall be provided with double coil earthing using 8 SWG G.I wire wound to 50mm diameter earth electrode and shall be connected to Earthing stud of pole. The earth electrode shall be buried upto a depth of 1 M below the ground level.
Errection of earthing for each street light pole shall be provided with double coil earthing using 8 SWG G.I wire wounded to 50mm diameter earth electrode and shall be connected to Earthing stud of pole. The earth electrode shall be buried upto a depth of 1 M below the ground level.
S/F 2 feet long Decorative cast iron pole i/c connection etc. as reqd.
S/F Ruby 40W LED Post Top lantern (RUBYPT40WLED757PSYMTOPC) i/c connection etc. as reqd.
S/F 23W LED Lamp.
Providing and Fixing of cast Aluminium outdoor light (product code: 25W-COB-SE-Black-GL) i/c connection etc as reqd.
Supply of 8.0M hotdip galvanised octagonal pole with 1500 mm long decorative single arm bracket including foundation bolts. Each pole have a weather proof looping / terminal box clapmed at 550mm shall be provided with a suitable earth terminal Bakelite sheet shall be provided if the cable termination is inside pole with 2 nos. 6A SP MCB and other accessories as reqd.
Erection of 8.0M hotdip galvanised octagonal pole with 1500 mm long decorative single arm bracket including foundation bolts. Each pole have a weather proof looping / terminal box clapmed at 550mm shall be provided with a suitable earth terminal Bakelite sheet shall be provided if the cable termination is inside pole with 2 nos. 6A SP MCB and other accessories as reqd.
Supply & erection of ms pillar box 5 feet high 2 feet 6 inch width 2 feet depth made by 4mm leaf type door in the both side 2 nos. tower bolts to be fix both side no. 63 a tpn rewireable type sheet steel encloser switch fuse unit havells, 2 nos 32 a tpn rewireable type sheet steel encloser switch fuse type havells 1 no. single dilemtimer, 1 no. 4 pole 70 a conectactar 1 & t (ml-4) i no tonggle switch 1 no. 100 a tpn copper tinned copper busbar size of copper bar 25mm x 6mm x 460mm with brass bar chamber on inter connection by suitable size copper wire painting of piller box 2 nd coat of aluminium paint over 1 st coat of redoxide primer etc. as reqd.
SITC of floor mounted Double Door Outdoor Type Conforming to IP 55 protection, 3 phase, 400 Amps, 440 Volts, 50 Hz, to withstand rough usage and weather, fabrication with 16 SWG CRCA sheet with hinged type doors, detachable gland plates at top for cable chamber, earthing studs, bottom cable entry provision, including supplying and fixing the following switchgear, interlocking between incomer and bus coupler, interconnections with bus bar, internal control wiring, earthing etc. complete as required and as per technical specifications.
(a) INCOMING:
(i) 250A, 4 pole 36KA, MCCB with Thermal and Magnetic release with spreader link and rotary handle - 2 nos for 2 incomers.
(ii) Bus Bar - TPN Aluminium Main Horizontal Bus Bar of 400 Amps for each phase and neutral.
(ii) Interlocking arrangement for 2 incomers and 1 bus coupler.
(iv) Multifunction Meter - 2 nos 2 incomers.
(v) C.T. Resin cast, 250/5 Amps, 15 VA, Class 1
(vi) LED type indicating lamps (Red Yellow Blue) with control MCB = 2 set.
(vii) LED type indicating lamps (ON & OFF) with control MCB = 2 set.
(b) BUS COUPLER:
(i) 250A, 4 pole 36KA, MCCB with Thermal and Magnetic release with spreader link and rotary handle - 1 No.
(ii) LED type indicating lamps (ON & OFF) with control MCB = 1 Set.
( c) OUTGOING
(i) 63A, 4 pole 30KA, MCCB with Thermal and Magnetic Release with spreader link and rotary handle - 6 nos.
(ii) LED type indicating lamps (ON & OFF) with control MCB = 06 set.
(iii) 32A TP MCB (C Curve) - 8 nos.
(iv) Interconnetion with Aluminium BusBar.
Murphy Thumrah
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid