REPAIRS/REPLACEMENT OF TILING, PERIODICAL SERVICES, JOINERY, ROOF TREATMENT AND PLUMBING WORKS OF VARIOUS E/M INSTALLATIONS UNDER AGE B/R WEST UNDER GE (WEST) COLABA, MUMBAI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises out side MD land all as specified and as directed.

M&L for digital coloured glazed ceramic tiles 300x450x7mm or 600x300x7mm thick in vertical surfaces (including designed borders ) such as skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match the shades of the tiles laid over rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed. Note:- (Rate of Designer border in vertical surface will be deemed into quoted rates)

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) all as specified and as directed.

M&L for any coloured digital ultra strong / heavy duty outdoor anti skid vitrified tiles 15 mm thick (Square / Rectangular) polished area of each tile exc 0.09 Sqm and not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles and including 20 mm thick in cement plaster in CM (1:4) for fixing tiles all as specified and as directed.

Taking down top assembly complete (excepet curtains and guide channel of rolling shutter push or pull or manual type and re-fixing the same in same position after necessary repair such as cleaning, replacement of rusted nuts and bolts, including welding/grinding as required for proper and smooth function area of each shutter exc 5 sqm but not exc 10 sqm each all as specified and directed.

Taking down top assembly complete, area of each shutter exc 5 sqm but not exc 10 sqm each all as specified and as directed.

S&F Steel rolling shutters, thickness of lath 1.25 mm, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, push pull or manual type all as specified and directed.

S&F in repairs steel ball bearing suitable for rolling shutter for smooth functioning of rollng shutter all as specified and directed

S&F in repairs GI pipe medium grade of 40 mm bore (nominal bore) as in suspension shaft for rolling shutter for smooth functionong cut to size inculding necessary drilling all as specified and directed.

S&F in repairs steel spring suitable for mannually operated rolling shutters for smooth functioning all as specifed and directed.

Dismantling and breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete drain pipes including all fittings and accessories, 100/75 mm dia and in any position all as specified and as directed.

S&F PVC(SWR) pipes, 110 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips all as specified and as directed.

S&F PVC(SWR) bends suitable for 110 mm external dia all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; door frame, and similar work conforming to Fe 290 Gde-E-165 all as specified and as directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) all as specified and as directed.

M&L Precast RCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) for cover slabs for manholes, open drains including all mouldings but excluding frame, set in cement mortar (1:4) all as specified and as directed.

M&L Mild steel bars 6mm to 8mm dia (and flat iron where required), cut to length, bent to shape, required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips or welded to flat iron all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and in paving not exc 15 cm thickness ( below or above ground level) all as specified and as directed.

M&L PCC 1:4:8, type D2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete all as specified and directed.

M&L for Sand filling/soil whenever required including watering, ramming/ rolling and finishing to required size/shape etc n exc 25cm thick high from base all as specified as directed

M&L 60mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thick M-35 Grade with grey cement and pigment of any pattern as approved by GE and as per manufactures Instructions all as specified and as directed.

M&L hard core of broken stone or boulders of gauge not exc 63mm deposited, spread & levelled in layers not exc 15cm thick, including watering and ramming to a true surface all as specified and directed. Note:- Volume of hard core after consolidation will be measured and paid.

M&L RCC (1:2:4), type B1 (using 20mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating all as specified and directed.

Preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer all as specified and directed.

Dismantling of RCC posts and struts of any section including taking out embedded portion and making good disturbed ground including barbed wire fencing all as specified and directed.

Dismantling of barbed wire fencing of any description from RCC post / struts all as specified and directed.

Excavation in post hole each n exc 0.5 cum getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm, watering and removing surplus soil to a distance n exc 50m and making good surface all as specified and directed.

M&L PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) in foundation of pillars and posts all as specified and directed.

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provn of Galvanised mild steel wire, staples or steel pins all as specified and directed.

M&L for restraining and re-securing of fencing wire of any description including making good staples all as specified and directed.

Demolition/dismantling of RR masonry/brick work built in cement mortar including boulder Pitching all as directed by Engr-in-Charge.

M&L for Brickwork with sub class `B' bricks, straight or curved on plan exc 6m mean radius, built in CM(1:6) all as specified and directed.

All as per item No 33 mentioned here in above but except bricks. (Serviceable bricks obtained from Item No 32 above to be reused.)

Taking down cement plaster on brick work or stone walls, etc including raking out joints, hacking for key, scrubbing down with water all as specified and directed.

M&L for 15-20 mm average thick Ready Mix Plaster in multy layer, mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces, including use of scaffolding all as specified and directed. Note :- Liquid water proofing compound will be measured and paid seperately as supply only.

M&L 12 mm thick ready mix plaster in single layer on brick wall or concrete surfaces including making groove of appropriate size, on other than fair faces of concrete/brick surfaces (internal surface) and finished surfaces even & smooth without using extra cement all as specified and as directed.

Supply only liquid water proofing compound

M&L for two coats of white washing on new wall surfaces, including preparation of surfaces all as specified and directed.

M&L for two coats of white washing on undecorated wall surfaces, including preparation of surfaces all as specified and directed.

M&L prepration of new wall surfaces, over 10cm girth, preparation of surfaces, filling cracks with approved crack filler applying two coats of water proof acrylic elastomeric paint, over a coat of wall primer as required complete all as specified and as per manufacturer's instruction.

M&L for complete removal of existing treatment on wall surfaces, over 10cm girth, preparation of surfaces, filling cracks with approved crack filler and applying two coats of water proof acrylic elastomeric paint, over a coat of wall primer as required complete all as specified and as per manufacturer's instruction.

M&L crack filler for exterior plastered surfaces upto 10 mm all as specified and directed.

M&L for smart care crack seal compound for both interior and exterior surfaces, crack bridging ability for plaster cracks of upto 3 mm all as specified and directed.

Hacking out old broken glass panes size quality or description from metal frames including punching or drilling out old glazing pins/ spring clips and providing and fixing new all as specified and directed.

S&F sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane 3mm thick all as specified and directed.

Dismantling of wall and ceiling board (fibre, pulp, insulation etc or insulation boards/slabs/blankets any thickness including cover fillets all as specified and directed.

S&F False ceiling with Gypsum based ceiling tiles and frame work (with aluminum foil on one side) of size 595 x 595 mm of thickness not less than 9 mm including with GI powder coated frame angle /tee grid frame work for ceiiling with following specfication (a) Angle of size 25x25x1mm powder coated (b) 25x25x1 mm GI powder coated at Bottom tee as in main member (c) 25x25x1 mm thick GI powder coated at bottoam tee as ibn cross members (d) S&F 1.6mm dia GI wire suspenders alongwith adjustable clamps to maintains leveling inculding fixing to ceiling fasteners manufacturers instructions

S&F in repairs hood for rolling shutters fabricated with 1 mm thick mild steel, haxagonal, square or circular shape including angle/bottom edge fixed over bracket plate with necessary fixture & fastners and including one shop coat of primer all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint (up to four storeys bldgs) including use of scaffolding where required for external painting of steel surfaces all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthtic enamel paint (up to four storeys bldgs) including use of scaffolding where required for external painting of wooden surfaces all as specified and directed.

M&L in repairs for glazed / matt finish chequred cement concrete coloured tiles of area exc 0.09 Sqm but not exc 0.36 Sqm and 25 mm thick, set, jointed and pointed in neat cement slurry (with gray cement and pigment) laid over and including 20 mm thick screed bed in cement morter (1:6) for fixing tiles all as specified and directed.

M&L in repairs for any coloured vitrified heavy duty outdoor anti skid tiles 10 mm thick (Square/rectangular) polished area of each tile exc 0.06 Sqm and not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles and including 20 mm thick in cement plaster in CM (1:4) for fixing tiles all as specified and directed.

M&L in repairs 20mm thick Granite (of any type) machine cut in, wall lining, steps, jambs, pillars, window cills, skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing and including rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) all as specified and direceted.

S&F in repairs framed work as in doors or gates of angle or other section with gusset plates, rails, braces, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to FE 290 Gde -E-165 all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate as in plinth protection and all other similar works, finishing the cement concrete surface even and smooth without using extra cement all as specified and directed.

Cleaning of open drains completely by removing silt, soil, mud sludge, vegetation growth and removing the same to out side MoD land all as directed by Engr-in-Charge for width of drains n. exc. 30 cm .

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 15 mm dia bore all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20 mm dia bore all as specified and directed.

Fixing only old 15 mm steel tubing and including cleaning in positon (walls, ceiling and floor) all as specified and directed.

Fixing only old 20 mm steel tubing and including cleaning in positon (walls, ceiling and floor) all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors all as specified and directed

S&F GI tubing 20 mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors all as specified and directed

S&F in repairs vitreous China wash basin white, flat back, size 580X450 mm including cutting for pinning in ends of brackets all as specified & directed.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of suitable size all as specified & directed.

S&F as in repairs 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified & directed.

S&F as in repairs 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified & directed.

S&F in repairs PVC connection 15mm size PTMT nuts of length 450 mm all as specified & directed.

M&L in repairs fancy type CP Towel Rail 61 cm long all as specified and directed.

M&L in repair CP soap dish all as specified and directed.

S&F in repairs 15 mm bore overhead rain shower 200x200mm size, single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 305mm long (light weight) square shape with wall flange all as specified & directed.

S&F as in repairs stainless steel grating round 125mm size of anti- cockroach, anti-clog, anti faul all as specified and directed.

S&F in repairs 15 mm bore piller taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed shank and fly nuts all as specified & directed.

M&L in repairs 75 mm dia PVC(SWR) multi floor trap with grating including jointing with solvent cement all as specified and directed.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples all as specified and directed.

S&F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples all as specified and directed.

S&F in repairs aluminium handle 150 mm cast type anodised all as specified and directed

S&F aluminium handle 150 mm cast type anodised all as specified and directed

S&F in repairs 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed.

Resecuring or easing & adjusting, without taking down shutters of any description area exc 1.00 sqm but not exc 2.00 sqm all as specified and directed.

Taking down shutters of any description area exc. 1.00 sqm but n.exc. 2.00 sqm each all as specified and directed.

S&F in repairs 100 mm butt hinges medium weight cold rolled stainless steel all as specified and directed

S&F 100 mm butt hinges medium weight cold rolled stainless steel all as specified and directed

S&F in repairs aluminium anodised 200 mm barrel tower bolts of extruded section all as specified and directed.

S&F aluminium anodised 200 mm barrel tower bolts of extruded section all as specified and directed.

Taking down Chowkhats or frames with shutters area exc 1.50 sqm but n exc 4.00 sqm each all as specified and directed..

Taking down Chowkhats or frames with shutters area n exc 1.50 sqm each all as specified and directed..

S&F Factory made 35 mm thick 2nd class hard wood plain framed panelled shutters (any numbers of panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS :1003(Part-I) kiln seasoned and chemically pressure treated all as specified and directed.

S&F 2nd class hard wood plain,solid, straight chowkhat and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed.

M&L for preparation of wood and wood base materials, new or old, of any description and girth, not otherwise described, and treating ends of posts, back of chowkhats, etc. area tarred exc 0.1 sq m but n. exc. 0.5 sq m each all as specified and directed.

M&L PCC (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) as in bed blocks for hold fast including necesssary formwork all as specified and directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as specified and directed.

Dismantling AC /steel or any type sheet sheeting, any gauge, thickness, roof coverings including scafoldings of any height all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based trapezoidal/mangalore tile profile roofing sheets, chajjas, 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings having effective & overall width 1015 mm &1072 mm respectively, profile height 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including scafoldings of any height of the bldg all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof coverings /claddings to wall, fixed with self tapping screws including scafoldings of any height all as specified and directed.

S&F in repairs structural steel work in tubular/square tube trusses including special shaped washer, gusset/bearing plate using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 all as specified and directed.

M&L for providing and applying two coats of Fiber Reinforced elastomeric Liquid applied membrane, having crack bridging ability upto 2.5 mm, resistance to positive hydrostatic pressure of upto 10 bars, superior anti-carbonation, 1st coat self-priming coat & 2nd coat undiluted coat ensuring force coverage of 30 Sq. ft/kg for 2 coat with 160 micron DFT, applying one coat of thick modified acrylic silica base texture (2mm to 2.5 mm thick) as per desired pattern and 8 hours two coats of Ultra durable pure acrylic exterior emulsion with Low VOC , Anti Algal, Excellent DPUR for dust pick up resistance of fading of colors ensuring 60 micron DFT for two coat including removing existing roof treatment all as directed by Engineer-in-Charge. Note : Item to be executed by authorised aplicator only.

S&F in repairs for vitreous china, bowl urinal flat back, size : 465 x 355 x 265mm white (min) with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, securing urinal to plugs with and incl, 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 (excluding fixing supply pipe to flushing cistern, trap and waste pipe) all as specified and directed.

S&F for 30mm thick glazed & skelton, open rebated & prepared to receive glass/gauged etc divided in square with plain, chamferred or rounded mitred edges of framing plain, chamfered or rounded fitted with or without sash bars & metred beads for securing glass gauge etc size of members of shutters as specified in SSR Part-I section 8, clause 8.24(b) supplied & fitting to chowkats using 2nd class hard wood all as specified and directed.

S&F 75 mm dia PVC (SWR) vent cowl all as specified and directed.

Dismantling water tanks and removing to store all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 litre hoisted and fixed in position all as specified in SSR Part etc. complete all as specified and directions.

S&F in repair ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore (Min Wt 20mm- 210 gms) all as specified and directed.

S&F in repairs 20mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed all as specified and directed.

S&F PVC Tank nipple 20mm suitable for HDPE water tank min wt for 15mm-38gm/20mm-45gm all as specified and directed.

Cutting chases, pinning in, and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and as directed by Engineer-in-Charge .

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing as directed by Engineer-in Charge.

S&F Aluminium anodised 100 mm long Butt hinges type B-21 with galvanised mild steel screws all as specified and directed.

S&F Aluminum deco grill Cat No -104 6mm thick, cut to required size/shape and fixed in position with aluminium bedding T/F section all as specified and directed.

S&F anodised aluminium frame/shutter for door, window, and ventilator of any type including sliding/hunge type all as directed with one more rebates including fabrication of frame/shutters and fixing to wall with necessary lugs, cleat etc including all accessories such as glazing clips and rubber beading for fixing of glass panes, hinges, handles all as specified and directed (glass panes will be measured and paid seperately). Note : Contractor should seal the gap from inside and outside with silicon.

M&L 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square exc 0.5 sqm in each pane frosted on one side all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples all as specified and directed.

M&L 1.25 mm thick Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated push pull or manual type all as specified and directed.

S&F in repairs for stainless steel board high intensity reflective sign board made of hardened ACP sheet 2 mm thick POP riveted to stainless steel rectangular pipe of size 50 x 25 mm frame of size 900 x 1200 mm. Frame supported with bolts over 60 mm roun 3 mtr long stainless steel pipe of 1 gauge with stainless steel bonded clamp. All stainless steel sheet parts should be polished Sign board should be reflective on both side with wide HIP sheet and overlay flim of blue colour with computer cut letters sign and boarder including post hole and filling with PCC 1:4:8 all as specified and directed by Engr-in-Charge. The grade of stainless steel is 316 grade sutable for coastal area.

S&F in repairs 15 mm dia bore fancy type chromium plated bib taps with wall flange cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, or for brass ferrule all as specified and as directed.

S&F APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application all as specified and directed.

M&L Priming surfaces and applying havy treatment (for severe conditions) using glass fibre base bitumen felt, grade 2 all as specified and directed.

S&F in repairs PVC coated chain link wire gauge 4 mm and wire thickness 4 mm including line wire and mesh size type of standard staining bolts etc and size is 75x75mm including taking down old fence of any type and any size all as specified and directed.

S&F in repairs of SS 304 Grade metal letters of height 200mm with PU paint to match the logo colours, mirror polish finish, anti rust and including necesssary arrangements to fixing in walls, using scaffolding at any height all as specified and directed.

S&F Aluminum tubular hollow section 25 x 25 mm not exc 900 mm c/c on exceeding columns/beam/ slab to hold cladding and fixing Aluminium composite panel cladding plain metallic of approved colour/ shade to beam/ column/ slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour all as specified and directed.

RAMESH ENTERPRISES (BID ID -3075165)

binta construction (BID ID -3077640)

SHREE JAGDISH FURNITURE CO. (BID ID -3073720)

SHRI SAI ENTERPRISES (BID ID -3075151)

Nilesh Construction (BID ID -3076297)

Panther Facilities (BID ID -3076275)

Bidder Name

Frends Enterprises

Nilesh Construction

RAMESH ENTERPRISES

SHRI SAI ENTERPRISES

Panther Facilities

SHREE JAGDISH FURNITURE CO.

binta construction