Restoration of damage compound wall in premises of Mech and Hosp Division Udhampur repairs of chowkidar Qtr and allied work of Sub Division Complex is under day to day maintenance

Dismantling of broken/ fall wall for Demolishing Brick Work Manually/By Mechanical Means Including Stacking of Serviceable Material and Disposal of Unserviceable Material Within 50 Meters Lead as Per Direction of Engineer-In-Charge: In Cement Mortar (S.H 15.7.4) Qty: - (18’ x 8’x 0.75) = 108 Cft = 3.05 cum.

Brick Work with Common Burnt Clay (Non-Modular) Bricks of Class Designation 7.5 In Foundation and Plinth Including Curing In: Cement Mortar 1:4 (1 Cement: 4 Coarse Sand)(SH. 6.1.4) Qty for wall = 18’x8’x0.75’ = 108 Cft = 3.05 cum. Qty for chowkidar Qtr = 5’x4’x0.75 = 15 Cft = 0.42 cum Total qty: - 3.47 cum.

12 mm cement plaster of mix: 1: 6 (1 cement: 6 fine sand). (S.H 13.1.2) Qty: - 2 (18’x8’) + 0.75’X 18 + 2(5’x4’) = 341.5 Sft = 31.72 say 32 sqm

Dismantling of old broken window of chowkidar qtr Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead: 15.12.1 Of area of 3 sqm. and below 15.12.2 Of area beyond 3 sqm. (S.H 15.12.1) Qty: - 6’x 4.33’+ 4.16’x3.12’ = 38.95 sft = 39 = 3.6 sqm

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) 22.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) 22.1.2.3 Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns) (S.H 22.1.2.3) Qty: - = 18kg

Filling the gap in between aluminum frame and adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 22.8.1 Upto 5mm depth and 5mm width (SH 22.8.1) Qty: - 12 mtr

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) 22.3.3 With float glass panes of 8 mm thickness (weight not less than 20.0 kg / sqm) (S.H 22.3.2) Qty:- 2.4 sqm

CERAMIC GLAZED TILES Providing and fixing Ist quality ceramic glazed WALL TILES conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with ,; pigment of matching shade complete. as Per Direction of Engineer-In-Charge. (SH. 8.31) Qty: - 11’x 5.5’+2(13’x6’) +2(10’x6’) = 336.50 Sft. = 31.21 sqm

providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). 11.54.1 Size of tile 500x500 mm as Per Direction of Engineer-In-Charge. (S.H. 11.54.1) Qty: - 13’ x 10+ 7’x 3’+ 6’x 5’+5’x 3.5 = 198.5 Sft = 18.44 Sqm

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 13.89.1 One coat 13.89.2 Two coats as Per Direction of Engineer-In-Charge Qty: - 2(300’x 8’) = 4800 Sft = 445.93 sqm