REPAIR MAINT OF EXTERNAL WATER SUPPLY AND ALLIED WORK IN DOMESTIC AREA OF WAR MEMORIAL AND MES COLONY UNDER GE I R AND D KANPUR

Amount

Excavation in trenches not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide in any type of soil for laying and taking out of GI/CI pipes all as specified and directed.

Returning filling in including spreading, leveling watering and well ramming in layers not exceeding 25cm thick complete all as directed.

Removing excavated soils to a distance not exceeding 50 m and depositing where directed.

M&L for drilling hole at a depth up to 1.5 mtr below the normal ground level of suitable size to insert upto 150 mm dia pipe across the road in horizontal position complete all as directed.

M&L for cutting of road depth up to 1.5 mtr below the normal ground level of suitable size to lay pipe upto 150 mm dia pipe across the road in horizontal position incl making good all disturbed surfaces of road to match with existing surfaces by premix road material/PCC complete all as directed.

Disconnecting, dismantling and taking up or down old/unserviceable/cracked GI tubing with fittings incl cleaning for refixing complete all as spfd and directed for the following sizes:- Note: Excavation and earth work will be measured and paid separately under relevant items.

All as per Srl No 6 above but of size 15mm.

All as per Srl No 6 above but of size 20mm.

All as per Srl No 6 above but of size 25mm.

All as per Srl No 6 above but of size 40mm.

All as per Srl No 6 above but of size 50mm.

All as per Srl No 6 above but of size 80mm.

Re-laying, jointing and testing old but serviceable GI tubing (obtained from srl item No-6) and connection in new or old portion incl new fittings such as bends, elbows, union, tees, reducers etc as required at site laid in trenches or on floor or wall complete and making good all disturbed surfaces of wall/ floor/ road/ path to match with existing specification all as specified and as directed for the following sizes:-

All as per Srl No 7 above but of size 15mm.

All as per Srl No 7 above but of size 20mm

All as per Srl No 7 above but of size 25mm

All as per Srl No 7 above but of size 40mm

All as per Srl No 7 above but of size 50mm

All as per Srl No 7 above but of size 80mm

Supply & Laying, jointing and leakage testing GI tubing medium grade with all fittings such as bend, tee, elbow, union, reducer etc, laid in trenches/floor/walls and making good the disturbed surface to match with existing surface as (PCC work in 1:2:4 using 20 mm graded stone aggregate/ plastering in CM 1:4 and applying finishing coat of existing treatment) complete all as specified and as directed at site for the following sizes:- Notes :(i) The laying and jointing of pipes are required to be carried out in short / long streches catering to specific requirements of a purticular quarter or a group of blocks. (ii) Excavation & earth work shall be measured & paid seperately.

All as per Srl No 8 above but of size 15mm.

All as per Srl No 8 above but of size 20mm

All as per Srl No 8 above but of size 25mm

All as per Srl No 8 above but of size 40mm

All as per Srl No 8 above but of size 50mm

All as per Srl No 8 above but of size 80mm

Disconnecting, dismaantling and taking down CI/GI/DI/Cemented pipe line including all fittings with spigot and socket/ flanged end or any type, lead joint including removing from site complete all as specified and directed for the following bore pipe line :-

(a) 100 mm nominal dia bore

(b) 150 mm nominal dia bore

(c) 200 mm nominal dia bore

Re-laying, jointing and testing old but serviceable CI/DI pipe line after cleaning as taken down under Srl item No 9.00 here-in-before including all fittings as required at site complete and making good all disturbed surfaces of wall/ floor/ road/ path to match with existing specification all as specified and directed for the following bore pipe line :-

(a) 100 mm nominal dia bore

(b) 150 mm nominal dia bore

(c) 200 mm nominal dia bore

M&L in replacement of ductile iron pies incl rubber gasket joints and other relative accessories, class K-7 in any length laid in trenches complete all as specified and directed for the following bore pipe line :-

(a) 100 mm nominal dia bore

(b) 150 mm nominal dia bore

(c) 200 mm nominal dia bore

S&F in replacement of cast iron double flanged sluice valve class PN 1.0 confirming to IS 14846/2000 with with high tensile stainless steel spindle with CI wheel, Gun Metal Nuts/rings 'I' bolt, ISI marked including replacement of rubber packing complete all as specified and directed. for the following bore pipe line :-

(a) 80 mm nominal dia bore

(b) 100 mm nominal dia bore

(c) 150 mm nominal dia bore

(d) 200 mm nominal dia bore

S&F in replacement of cast iron double flanged sluice valve of 150mm dia class PN 1.6 confirming to IS 14846/2000 with with high tensile stainless steel spindle with CI wheel, Gun Metal Nuts/rings 'I' bolt, ISI marked including replacement of rubber packing complete all as specified and directed.

M & L for boring on existing CI pipe upto 200 mm dia for branch connections of up to 50mm dia pipe by fixing of MS clamp 50x4mm cut to length and bent to shape, drilled and welded with GI socket of suitable size incl rubber packing, nut, bolt etc and testing complete all as specified and direted.

Repair to GI pipe lines of size 15mm to 25 mm bore dia and repair to leaked joints of pipe line complete including replacement of old GI fitting i.e union,nipple & sockets etc including excvation and taking up & down GI pipe required cutting & threading refixing in position in trenches and making good all disturbed surfaces of wall/ floor/ road/ path to match with existing specification all as specified and as directed. Note: Excavation and earthwork shall be measured and paid separately under respective items

Repair to GI pipe lines of size 40mm to 80 mm bore bore dia and repair to leaked joints of pipe line complete including replacement of old GI fitting i.e union,nipple & sockets etc including excvation and taking up & down GI pipe required cutting & threading refixing in position in trenches and making good all disturbed surfaces of wall/ floor/ road/ path to match with existing specification all as specified and as directed. Note: Excavation and earthwork shall be measured and paid separately under respective items

Cutting existing CI/DI water pipe in position for making branch connection and CI/DI pipeline (Insertion of CI/DI tees bends of different size on connection pieces or for insertion of sluice valve) including excavation & earth work. Note : Fittings such as tees, bends, collars & reducers etc incl in this item and only run lead joints, CI/DI fittings & sluice valve shall be measured and paid separately and making good all disturbed surfaces of wall/ floor/ road/ path to match with existing specification all as specified and as directed for the following bore pipe line :-

(a) 150 mm bore pipe

(b) 100 mm bore pipe

(c) 80 mm bore pipe

M&L for Run lead joints complete with spun yarn of size 80mm dia all as spfd and directed for the following sizes :-

(a) 80 mm bore pipe

(b) 100 mm bore pipe

(c) 150 mm bore pipe

M&L for Cast iron/ductile iron special fittings for spigot and socketed pipes such as bends (any type, radius and angle) socket tapers any type, (straight, bend, increasing, decreasing or double socket etc) Tee pieces, single branch, Y junction, double branch, cross (all sockets or socket and spigot) collers, caps and plugs for upto 150 mm bore pipes complete all as specified and directed.

S & F stop valve 20mm dia, gun metal iron, screwed down, high pressure with crutch or butterfly handle, screwed for iron pipe or for ferrule ISI marked including dismantling the old U/S existing valve complete.

S & F in replacement of 150 mm bore non return valve both end flanged suitable for cast iron pipe including all fittings washer, nuts & bolt etc complete all as specified and directed.

M & L for opening up of leaking sluice valve and repacking of stuffing box & replacement of gland packing, nuts, bolts & washers etc complete all as specified of the following sizes :-

(a) 80 mm bore pipe

(b) 100 mm bore pipe

(c) 150 mm bore pipe

S & F gun metal iron gate valve with iron wheel head, screwed both ends for iron pipe, ISI marked, complete all as specified including dismantling the old unserviceable existing valve complete all as specified and directed of the following sizes :-

(a) 25 mm bore pipe

(b) 40 mm bore pipe

(c) 50 mm bore pipe

M&L joints with rubber gaskets for CI flanged pipe including necessary nut bolts and washers etc for pipe 80 mm bore complete all as specified and directed of the following sizes :-

(a) 80 mm bore pipe

(b) 100 mm bore pipe

(c) 150 mm bore pipe

S&F replacement stainless steel spindle with checknut suitable for sluice valve of including replacment of gland packing complete all as specified and directed of the following sizes :-

(a) 80 mm bore pipe

(b) 100 mm bore pipe

(c) 150 mm bore pipe

Cutting and removing unwanted grass and wild growth including bushes and shrubs from the roots at water supply installations including removing and even finish the entire area complete all as specified and directed at site by Engineer in charge.

Supply only sodium based granular having chlorine content 65-70 % disinfectant for water treatment, more stable than Chlorine Gas, and stronger than bleachingpowder, and sodium Hypochlorite packing in 45 kg drum completed all as specified & directed. Make : As per particular specification (Note: Contractor must produced TC & PVS from the manufactures/ All India Distributor at the time of supply for the Originality of material).

S & F in replacement of fully automatic single phase preventer, suitable for 30to 50 HP submersible motor, 3 phase 440 volt completet all as specified and directed.

M & L for construction of valve pit chamber in replacement 950 x 950 x 950 mm internal dimensions, 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in CM (1:6), 230 mm thick, PCC bed (1:4:8) type D2 150 mm thick, cement plastering, finishing 15 mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces including dismantling and removal of old unserviceble valve pit remains all as specified and directed.

S & F in replacement of fully automatic star delta starter, suitable for 30to 50 HP submersible motor, 3 phase 440 volt complete with over load protection with adjustable relay range, electronic timer relay and single phasing preventor incl suitable size 40X4 mm angle iron frame grouted on wall for proper mounting arrangement all as specified.

M&L for replacement of MS angle iron/Channel support for motor/pump incl nut bolt etc incl painting and making good all disturbed surfaces with PCC 1:2:4 complete all as spfd and directed.

Cleaning/removal of grass/bushes/plants/mud etc all around/inside the valve pit chamber up to size 950mm x 950mm x 950mm complete all as spd and directed all as specified and directed.

M & L for repairing leakages of CI pipes with spigot and socket ends, including de-watering of pipe lines and trenches, burning out joints to recover lead and making new lead joint with retrieved material and any additional quantity of lead required as per site requirement incl all other materials such as spun yarn, fire wood incl excavation ,earth work (upto 1.5 mtr depth) by manual as required at site etc and making good the disturbed surface to match with existing surface as (PCC work in 1:2:4 using 20 mm graded stone aggregate) complete all as specified and as directed of the following sizes :-

(a) 80 mm bore pipe

(b) 100 mm bore pipe

(c) 150 mm bore pipe

M& L for repairing the leakage of lead joints for CI pipe incl bailing out the line water after burning out the existing lead from joints and using extra lead and spun yarn as required and directed for the following sizes :- Note: Excavation and earthwork if any shall be measured and paid separately under respective items.

(a) 80 mm bore pipe

(b) 100 mm bore pipe

(c) 150 mm bore pipe

(c) 200 mm bore pipe

Taking up/down pipe line including excavation, returning filling and removal of excavated soil near existing pipe line in break down maint of rising main line/distribution line. Providing any type of special tools & plants such as JCB & material (such as detachable joints/leak repair clamp suitable for CI/DI fittings, coller/short pieces of pipes or any other fittings as required to minimize the breakdown time and rectification of the problem as soon as possible. Rectification work must be start within two hours of intimation to contractor. Any delay in rectification may be penalized as deemed fit for the following sizes :-

(a) 80 mm bore pipe

(b) 100 mm bore pipe

(c) 150 mm bore pipe

(c) 200 mm bore pipe

M&L for repairing the leakage of flange end joints for MS/CI pipe by doing welding incl replacement of rubber gasket, nut, bolt and washers etc bailing out pipe line water as required and directed for the following sizes :-

(a) 150 mm bore pipe

(b) 200 mm bore pipe

Taking / lifting out defective submersible pumps set from bore well complete with column pipe upto 150mm dia steel rope, submersible cable and accessories etc and relowering and commissioning the same after repairing works and testing complete of rating 20 to 30 HP 3 phase.

Dismantling, taking out complete burnt winding wire of submersible motor including cleaning of stator slots replacement of defective parts and rewinding with existing type & gauge of copper winding wire pvc insulated as per motor capacity and using new insulation material such as insulating paper sleeves etc.replacement of submersible cable as required size/ length complete incl testing all as directed of rating 20 to 30 HP 3 phase. Noe : The cost of transportation from pump house/yard to workshop and workshop to pump house/yard shall deemed to be included in item rate quoted by contractor.

Dismantling submersible pump, straightening & polishing of pump shaft, making threading and key way, turning surfacing polishing to impellers, CI bowl complete including replacement of worn out parts as per requirement complete incl testing and all as directed of rating 20 to 30 HP 3 Phase. Noe : The cost of transportation from pump house/yard to workshop and workshop to pump house/yard shall deemed to be included in item rate quoted by contractor.

S & F in replacement of Motor bush of gun metal upper and lower for 20 to 30 HP capacity (Set of two)

S & F in replacement of Rotor bearings sleeve upper and lower for 20 to 30 HP capacity, (set of two.)

S & F in replacement of coupling arrangement with key for motor for 20 to 30 HP capacity

S & F in replacement of Sand guard for submersible pump set for 20 to 30 HP capacity

S & F in replacement of Thrust bearing assembly for submersible pump set motor for the capacity 20 to 30 HP

S & F in replacement of Epoxy type cable jointing kit complete with all the jointing material, ferrule, for 1100 volts flat submersible copper conductor cable 16/10 Sqmm 3 core.

S & F of Rubber gasket (packing) suitable for 80 to 150 mm dia flange.

S & F in replacement of MS Nut bolts with spring washers of any sizes.

S & F in replacement of Steel wire rope stranded 12 mm dia for hanging of submersible pump set .

S & F in replacement of Electric cable for submersible pump set, flat 10 Sqmm 3 core stranded copper conductor PVC sheathed cable all as specified and directed.

S & F in replacement of impeller with key and distance bushes for 20 to 30 HP capacity pump

S & F in replacement of Pump shaft of stainless steel suitable for 20 to 30 HP capacity pump.

S & F in replacement of NRV for 20 to 30 HP capacity pump

S & F in replacement of Bearing bush for submersible pump for 20 to 30 HP capacity.

S & F in replacement of Bowl assembly for submersible pump set for the capacity 20 to 30 HP

S & F in replacement of Distance sleeves for submersible pump for 20 to 30 HP capacity.

Supply only MS column pipe heavy Duty of size 150 mm nominal dia in standard length of 3.0 mtr, heavy duty duly threaded welded with MS Flange of 12 mm thick on both end with supporting ribs (4 Nos.) including jointing & with new rubber or fiber board gasket with all nuts, bolts and washer set complete all as specified and directed.

S&F in replacement of Motor 230 volt, 50 Hz, voltage input 230 volt single phase 50 Hz, current consumption 0.4 Ampr power 120 watt, speed 4 pole induction non synchronous 920 RPM Approx under lead motor shaft dia 15mm X Length 50 mm motor is flange mounted 4 no of 7 mm dia hole at PCD 150 mm incl all fixing arrangement complete all as specified and directed.

S&F in replacement of shaft complete with impeller made out of MOC poly propelene rigid dia 32 mm X Length 500 mm impeller type two bladed pitched blade turbine numbar of impeller- I incl all fixing arrangements.

S&F in replacement of Dosing tank only capacity 100 Ltrs MOC PE FRP Ltd contaning port hole for pouring chlorination chemical and water them necessary provision for mounting of moteo at proper angel provision for mounting dosing pump on lid level gauge.

S&F in replacement of Rotor assembly with bearing brackets & tolerance ring complete all as specified and directed.

S&F in replacement of Single head feet rate control with shaft complete all as specified and directed.

S&F in replacement of Pump head ( ferrules 1/4" & duchbill included) complete all as specified and directed.

S&F in replacement of Pump tube complete all as specified and directed.

S&F in replacement of Injection check valve complete all as specified and directed.

S&F in replacement of Weighted suction line strainer 3/8'' complete all as specified and directed.

S&F in replacement of 3/8'' white suction/discharge tubing complete all as specified and directed.

S&F in replacement of Check valve duckbill only (PK-5) complete all as specified and directed.

S&F in replacement of Gear motor complete 230 volt 50 Hz all as specified and directed.

S&F in replacement of Coil 250 volt 50 Hz complete all as specified and directed.

S&F in replacement of Roller Assembly complete all as specified and directed.

M & L for rewinding of agitator motor of capacity 120 watts, 960 RPM single phase 230 V and using copper winding wire of existing gauge with necessary insulation material including testing after repair and refixing of the same complete all as directed.

M & L for repair/maint of monoblock pump set up to 5 HP capacity by means of dismantling from foundation derusting of shaft filling of gland packing replacement of seal bearing etc necessary repair in foundation to make rigid the system and arrest the vibration all as directed.

Dismantling the motor , taking out the burnt copper winding wire of motor up to 5 HP and Rewinding of motor with existing copper wire of existing gauge as per motor capacity using new insulation material such as insulating paper sleeves etc. bakinmg complete with super enamelled insulating varnish including cleaning of stator slots and testing complete, all as directed

S & F of in repair Power contactor TP as per existing type & make fitted at site for starter suitable for 40 HP/30HP/20 HP submersible pump set.

S & F in repair Over load relay (as per sample) for starter suitable for 40 HP/30HP/20HP submersible pump set.

S & F in repair Timer (as per sample) suitable for star delta starter for 40/30/25/20 HP submersible pump set.

Testing of drinking water for chemical analysis as per IS 10500:2012 guideline after lifting the sample from pump as per testing guide line enumarated in test physical parameter (pH value, turbudity,colour, order) Chemical parameter (Amonia free & saline,Ammonia Albuminoid o2 absorbed , nitrate, chloride, hardness temprory and permanent , TDS , Metal Iron , Magnese, Zinc, Calcium, Magnisium, Sulphate, Phenolic Sustances) all as directed by Engr In Charge. Make: Bhart Test House/HBTU/ Sepectro, BalaJee Labs

santosh electronics

M/S PASHUPATI TRADERS

S B ENTERPRISES