Fencing material

BARBED WIRE Line Wire - Galvanized steel wire of 2.5 mm diameter. Point wire - Galvanized steel wire of 2.5 mm diameter. Barbs - Distance between two boards 75mm, the barbs shall have four points and shall be formed by twisting two point wires each two turns. tightly around both the line wires making altogether four complete turns. Standard- Conforming to IS-278-2009

RCC Fencing Poles Height 2.0 m Type- Straight Length - 2.00 m Dimensions - Bottom 10x10 cm square, Top 8x8 cm square. Cement Concrete Mix - Cement, sand and metal ratio 1:2:4, with 12.5 nominal size coarse aggregate. Sand used should be free from clay and salt. concrete mix shall be conforming to grade M-15 of IS:456:2000 Reinforcement - 4 round vertical bars of 6 mm diameter. 11 no of stirrups of 6 mm diameter round MS bars 20 cm center to center. Hooks - 5 no, bottom hook should be provided 60 cm above the bottom of the pole, second at 82.5 cm, third hook at 112.5 cm, fourth hook at 150 cm, top and fifth hook at 195 cm from bottom. Manufacturing- In order to ensure desired compressive strength, RCC fencing poles should be compacted with the help of platform vibrators. Surface should be uniform and free from voids. The concrete cover over the reinforcement should not be less than 1.5 cm.

PRCC Fencing Poles Height 2.0 m PRE STRESSED RCC FENCING POLES Type- Straight Length - 2.00 m Dimensions - Bottom 10x10 cm square, Cement Concrete Mix- Concrete Mix Shall be conforming to grade M-15 of IS:456:2000 Reinforcement - There Shall be 4 Nos. of vertical reinforcement of high tesile steel wire of 4 mm dia. Holes Hooks - 6 nos, bottom hole should be provided 50 cm above the bottom of the poles, The central distance betbeen the top and bottom holes shall be equally divided for remaining holes. J Hook shall be of 6mm dia MS Bar with proper threads at one end nut and washer for tightening purpose. These J bolts shall be pass through the holes of poles. Manufacturing- In order to ensure desired compressive strength, RCC fencing poles should be compacted with the help of platform vibrators. Surface should be uniform and free from voids. The concrete cover over the reinforcement should not be less than 1.5 cm. Standard - Conforming to IS 4996:1984 with up to date amendments.

U Nails MS- Corrosion Resistant U shape Stainless Steel

नीलगिरी पोल्‍स की कुल लम्‍बाई 2.10 मीटर एवं गोलाई वर्ग 31-45 से.मी. (2.10 मीटर में से 0.45 मीटर निचली सतह पर डामर से पुताई एवं शेष पोल्‍स के आवरण पर पूर्ण रूप से जलरोधी पेंट (आयल पेंट) सहित तथा पोल की उपरी सतह पर 15 से.मी. में शाक्‍वाकार शेष सहित।

Galvanized steel Chain Link Fence Mesh Wire - Galvanized steel wire of 3.15 mm diameter Fabric Size- 100x100 mm Height-150 cm Line Wire-2 numbers of line wires of 4.00 mm diameter Standard- Conforming to IS-2721-2003, with up to date - amendments.

Galvanized steel Chain Link Fence Mesh Wire - Galvanized steel wire of 3.15 mm diameter Fabric Size- 75x75 mm Height-150 cm Line Wire-2 numbers of line wires of 4.00 mm diameter Standard- Conforming to IS-2721-2003, with up to date - amendments.