Re-Construction of 2 No. Class Rooms with Verandah, Toilet Block, Septic Tank, Soak Pit in Govt. Girls Middle School Dhara Jaranwali Gali, in Poonch District under Jhelum-Tawi Flood Recovery Project

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. ( not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan,including dressing of sides and ramming of bottom lift upto 1.5m, including disposal of excavated earth upto 1Mtr from cutting edge,disposal earth is to be levelled and neatly dressed : All kinds of soil . (Refer J&K Sanctioned Schedule of Rates 2020, Item code 2.8.1)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering . All work up to plinth level with : 1:5:10 ( 1 cement :5 coarse sand :10 graded stone aggregate 40 mm nominal size ). (Refer J&K Sanctioned Schedule of Rates 2020, Item code 4.4.8).

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering . All work up to plinth level with :1:4:8 ( 1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size ). (Refer J&K Sanctioned Schedule of Rates 2020, Item code 4.4.7).

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering . All work up to plinth level with :1:3:6 ( 1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size ). (Refer J&K Sanctioned Schedule of Rates 2020, Item code 4.4.5).

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centring ,shuttering,finishing and reinforcement.All work upto plinth level. 1:1½ :3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20mm nominal size) (Refer J&K Sanctioned Schedule of Rates 2020, Item code 5.1.2).

Reinforced cement concrete work in beams,suspended floors,roofs having slope 15 degree,landing,balconies,shelves,chajjas,lintels,bands,plain window sills,staircase and spiral stair cases upto five level including curing but excluding the cost of centring,shuttering,finishing and reinforcement with 1:1½ :3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20mm nominal size). (Refer J&K Sanctioned Schedule of Rates 2020, Item code 5.3.1).

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering . All work up to plinth level with :1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size ). (Refer J&K Sanctioned Schedule of Rates 2020, Item code 4.4.3).

Steel reinforcement for R.C.C. work including straighetening,cutting,bending,placing in position and binding all complete upto plinth level. Mild steel and medium tensile steel bars. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 5.22.1).

Centering and shuttering including strutting, propping etc. and removal of form work for :-

Foundations, footings of bases of columns etc.for mass concrete (Refer J&K Sanctioned Schedule of Rates 2020, Item code 5.9.1).

Suspended floors, roofs, landings, balconies and access platforms. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 5.9.3).

Columns, pillars, piers, abutments, posts and struts. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 5.9.6).

Lintels, beams, plinth beams, girders, bressumers and cantilevers. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 5.9.5).

Edges of slabs and breaks in floors and walls Under 20cm wide. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 5.9.16.1.1).

Brick work with common burnt clay F.P.S (non- modular) bricks of class designation 7.5 in foundation and plinth including curing in: in cement mortar 1:4 (1 cement : 4 course sand). (Refer J&K Sanctioned Schedule of Rates 2020, Item code 6.1.4).

Brick work with common burnt clay F.P.S (non- modular) bricks of class designation 7.5 in foundation and plinth including curing in: cement mortar 1:6 (1 cement : 6 coarse sand). (Refer J&K Sanctioned Schedule of Rates 2020, Item code 6.1.5).

Extra for brick work with common burnt clay brick/cement concrete bricks in superstructure above plinth level upto floor five level. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 6.4).

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in: cement mortar 1:4 (1 cement : 4 coarse sand). (Refer J&K Sanctioned Schedule of Rates 2020, Item code 6.15.2).

Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete. (Refer J&K Sanctioned Schedule of Rates 2012, Item code 2.23).

Providing and laying cement concrete in retaining walls,return walls,walls (any thickness) including attached pilasters,columns,piers,abutments,pillars, posts,struts,buttresses,string or lacing courses,parpets,coping,bed blocks,anchors blocks,plain window sills,fillets etc upto floor V level,including curing but excluding the cost of centring ,shuttering and finishing with : 1:5 :10 (1 cement: 5 coarse sand: 10 graded brick aggregate 40mm nominal size). (Refer J&K Sanctioned Schedule of Rates 2020, Item code 5.5.8).

6mm thick cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand). (Refer J&K Sanctioned Schedule of Rates 2020, Item code 13.17).

12mm cement plaster of mix 1:6 (1 cement : 6 fine sand). (Refer J&K Sanctioned Schedule of Rates 2020, Item code 13.1.2).

12mm cement plaster of mix 1:4 (1 cement : 4 fine sand). (Refer J&K Sanctioned Schedule of Rates 2020, Item code 13.4.1).

15mm cement plaster on the rough side of single or half brick wall of mix in 1:4 (1 cement : 4 fine sand). (Refer J&K Sanctioned Schedule of Rates 2020, Item code 13.5.1).

15mm cement plaster on the rough side of single or half brick wall of mix in 1:6 (1 cement : 6 fine sand). (Refer J&K Sanctioned Schedule of Rates 2020, Item code 13.5.2).

Brick edging 7cm wide 11.4cm deep of plinth protection with common burnt clay(non-modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement:4 fine sand) and curing complete.(Refer J&K Sanctioned Schedule of Rates 2020, Item code 13.48).

P/F M.S. grills of required pattern in frames of windows etc .with M.S flat,square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings/wooden frames with rawl plugs screws etc..(Refer J&K Sanctioned Schedule of Rates 2020, Item code 9.48.2).

Cement concrete flooring 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete,but excluding the cost of nosing of steps etc. 50mm thick with 20mm nominal size stone aggregare. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 11.3.3).

Providing and fixing strips in joints of terrazzo/cement concrete floorings. 40mm wide and 4mm thick.(Refer J&K Sanctioned Schedule of Rates 2020, Item code 11.16.1.1).

Making plinth protection 50mm thick cement concrete 1:3:6 (1 cement : 3 course sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 4.24).

Painting top of roofs with bitumen of approved quality at 17 Kg per 10 Sqm impregnated with a coat of course sand at 60 cudm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete. With residual type petroleum bitumen of grade VG -10 . (Refer J&K Sanctioned Schedule of Rates 2020, Item code 12.15.1).

10cm thick (average) mud phuska of damped brick earth on roofs laid to slope consolidated and plastered with 25mm thick mud mortar mixed with bhusa at 35Kg per cum of earth and gobri leaping with bhusha at 35kg/cum of earth and gobri leaping with mix 1:1 (1clay : 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1cement : 3 fine sand) mixed with 2% of integrall water proofing compound by weight of cement and finished neat. With common burnt clay (non modular) brick tiles of class designation 10.0. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 12.25.1).

Providing gola 75 x 75mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design. in 75 x 75 mm deep chase. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 12.31).

Making khurras 45 x 45cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1m x 1m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 12.32).

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. (i) Single socketed pipes of 110mm diameter. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 12.59.2).

Providing and fixing on wall face un-plasticized-PVC moulded fitting/accessories for un plasticized Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. 110mm bend. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 12.59.5.2).

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 2.11).

Banking excavated earth in layers not exceeding 20cm in depth,breaking clods,watering,rolling each layer with 1/2 tonne roller or wooden or steel rammers and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads,flood banks, marginal banks and guide bank etc.lead upto 50m and lift upto 1.5m in all kinds of soils: (Refer J&K Sanctioned Schedule of Rates 2020, Item code 2.3).

Steel work welded in built up sections/framed work,including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel etc . As required. In gratings,frames,guard bar,ladder,railing and similar brackets,gates and similar works. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 10.25.2).

Providing Wood wrok in frames of doors,windows clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fastners shall be paid seperately) SAL WOOD. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 9.1.7)

Providing 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts,nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm in 1:3:6 mix (1 cement: 3 coarse sand:6 graded stone aggregate 20mm nominal size). (Refer J&K Sanctioned Schedule of Rates 2020, Item code 9.52)

Providing and fixing 35mm thick factory made laminated veneer lumber door shutter conforming to IS :14616 and TADS 15 : 2001 (part B) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer-in-charge and panelling with panels of: 12mm thick pre-laminated particle board (decorative lamination on one sides and other side balancing lamination) grade-1, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I,IS:3087 marked,bonded with BWP type synthetic resin adhesive as per IS:848 and pre -lamination conforming to IS : 12823, Grade-1,Type- II marked.: (Refer J&K Sanctioned Schedule of Rates 2020, Item code 9.7.3).

Providing and fixing 35mm thick Panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws,excluding panelling which will be paid for separately,all complete as per direction of Engineer-in-charge( Note:-Butt hinges and necessary screws shall be paid separately). Second class deodar wood

Providing and fixing panelling or panelling and glazing in panelled or panelled or panelled and glazed shutters for doors,windows and clerstory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured ).Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. Plain particle board flat pressed,3 layer or graded wood particle board medium density Grade I,IS:3087 marked (Refer J&K Sanctioned Schedule of Rates 2020, Item code 9.8.10.1).

Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauge of average width for aperture 1.4mm in both direction with wire of dia 0.63mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge: Second class deodar wood. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 9.28.3).

Providing & fixing glazed shutters 35mm thick for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S.pressed butt hinges bright finished of required size with necessary screws. second class deodar wood. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 9.10.3).

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary accessories and stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluded fixing accessories such as nuts, bolts, fasteners etc. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 10.28).

Providing and fixing cup board shutters 25mm thick, with pre-laminated flat pressed three layer particle board or graded wood particle board IS : 12823 marked exterior grade (Grade-I, Type-II) having one side decorative lamination and other side a balancing lamination including second class teak wood lipping of 25mm wide x 12mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in-charge. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 9.130).

Providing and fixing glazed shutters for doors,windows and clerstory windows using 4mm thick float glass panes including ISI marked M.S.pressed butt hinges bright finished of required size with necessary screws. Second class deodar wood (Refer J&K Sanctioned Schedule of Rates 2020, Item code 9.10.3).

Finishing walls with textured exterior paint of required shade on New work (two or more coats @ 3.28 ltr/10 Sqm over and including base coat of exterior primer [email protected]/10 Sqm (Refer J&K Sanctioned Schedule of Rates 2020, Item code 13.54).

Providing and applying white cement based putty of specified thickness , of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. 2mm thick (Refer J&K Sanctioned Schedule of Rates 2020, Item code 13.88.2).

Finishing walls with Water proofing cement paint of required shade on New work Two or more coats applied @3.84 kg/10sqm). (Refer J&K Sanctioned Schedule of Rates 2020, Item code 13.53).

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including priming coat with cement primer. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 13.51).

Applying priming coat With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works.(Refer J&K Sanctioned Schedule of Rates 2020, Item code 13.58.3).

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood). (Refer J&K Sanctioned Schedule of Rates 2020, Item code 13.58.1).

Finishing with Deluxe multi surface paint system for interiors and exterior using primer manufacture,specifications: Painting steel work with deluxe multi surface of required shade to give an even shade. Two or more coats applied @0.90litre/10sqm over an under coat of primer applied @0.80litre/10 sqm of approved brand and manufacture. (Refer J&K Sanctioned Schedule of Rates 2012, Item code 13.57.3).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work (Refer J&K Sanctioned Schedule of Rates 2020, Item code 13.70.1).

Providing and fixing ISI marked oxIdised M.S sliding door bolts with nuts and screws etc.complete: 250x16mm. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 9.60.2).

Providing and fixing aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

125mm. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 9.102.1).

100mm. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 9.102.2).

Providing and fixing aluminium tower bolts ISI marked (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

250x10mm. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 9.99.2).

200x10mm. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 9.99.3).

100x10mm. (Refer J&K Sanctioned Schedule of Rates 2012, Item code 9.99.5).

Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. comlete 250x16mm. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 9.60.2).

Providing and placing (at all floor levels) polyethylene water storage ISI: 12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 20.38).

Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall.

15mm dia nominal bore. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 19.4.2.1).

20mm dia nominal bore. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 19.4.2.1).

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc.(external work) 25mm dia nominal bore. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 19.6.3).

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting & making good the walls etc. Internal work-Exposed on wall 20mm dia nominal bore.Medium (Refer J&K Sanctioned Schedule of Rates 2020.4.1.2, Item code ).

Providing and laying non-pressure NP2 class R.C.C pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joint etc. complete 100mm dia RCC pipe. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 20.5.1).

Providing and fixing water closet squatting pan (Indian type W.C pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe(of approved make) with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required . White Vitreous China Orrisa patern W.C pan of size 580x440 with integral type foot rests. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 18.1.2).

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chuna flushing cistern and CP flush bend with fittings and C.I.brackets 40mm flush bend, over flow arrangement with special of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets cutting and making good the walls wherever required: WC pan with ISI marked with solid plastic seat and lid . (Refer J&K Sanctioned Schedule of Rates 2020, Item code 9.3.2).

Providing and fixing wash basin with C.I brackets, 15mm C.P.brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever required: White vitreous china wash basin size 550x400mm with a pair of 15mm C.P. brass pillar taps. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 18.7.4).

Providing and fixing white vitreous china laboratory sink with C.I.brackets,C.P.brass chain with rubber plug,40mm C.P.brrass unions complete, including painting of fittings and brackets,cutting and making good the walls wherever required: Size 600x450x200mm (Refer J&K Sanctioned Schedule of Rates 2020, Item code 18.12.2).

Providing and fixing 15mm nominal bore C.P.brass long nose bib cock of approved quality conforming to IS standerads and weighing not less than 810 gms. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 19.39).

Providing and fixing 15mm nominal bore C.P.brass long nose bib cock of approved quality conforming to IS:8931 (Refer J&K Sanctioned Schedule of Rates 2020, Item code 19.40).

Providing and fixing 15mm nominal bore C.P.stop cock (concealed) of standerd design and of approved make conforming to IS:8931 (Refer J&K Sanctioned Schedule of Rates 2020, Item code 19.42).

Providing and fixing 15mm nominal bore C.P.brass angle valve for basin mixer and geyser points of approved make conforming to IS:8931 (Refer J&K Sanctioned Schedule of Rates 2020, Item code 19.43).

Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete.Flexible pipe 32mm dia. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 18.28.2.2).

P/F Unplasticised PVC connection pipe with brass union 30cm length. 15mmnominal bore (Refer J&K Sanctioned Schedule of Rates 2020, Item code 1915.1.1).

Providing and fixing100mm sand cast iron grating for gully Trap. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 18.29).

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. Rectangular shape 453 x 357mm (outer dimensions). (Refer J&K Sanctioned Schedule of Rates 2020, Item code 18.32.2).

Constructing masonry chamber 30x30x50 cm inside,in brick work in cement mortar 1:4(1 cement:4 coarse sand) for stop cock,with C.C.surface box 100x100x75mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3(1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size) including necessary excavation, foundation concrete 1:5:10(1 cement:5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement:3 coarse sand) 12mm thick,finished with a floating coat of neat cement complete as per standard design. With common burnt clay (non modular) bricks of class designation 7.5 (Refer J&K Sanctioned Schedule of Rates 2012, Item code 19.26).

Providing and fixing Ist quality ceramic glazed floor tiles conforming to IS : 15622(thickness to be specified by the manufacturer) of approved make in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-charge in skirating risers of steps of steps and dado over 12mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 11.50A).

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4(1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigment etc. complete size of tile 600x600mm. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 11.52.2).

Marble work gang saw cut (polished and machine cut) of thickness 16mm for wall lining(veneer work),backing filled with a grout of 12mm thick average in cement mortar 1:3(1 cement:3 coarse sand),including pointing with white cement mortar 1:2 (1 white cement:2 marble dust) with an admixture of pigment to match the marble shade(To be secured to the backing by means of cramps,which shall be paid separately).16mm thick (Area of slab upto 0.5sqm) (Refer J&K Sanctioned Schedule of Rates 2020, Item code 8.1.1.1).

Construction brick masonry chamber for underground C.I. inspectaion chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement:4 coarse sand) C.I. weight of cover with frame (light duty) 455x610mm internal dimensions,total weight of cover with frame to be not less than 38kg(weight of cover 23 kg and weight of frame 15kg) RC.C.top slab with 1:1 ½ :3 mix (1 cement:1 ½ coarse sand :3 graded stone aggregate 20mm nominal size),foundation concrete 1:5:10(1 cement:5 fine sand:10 graded stone aggregate 40mm nominal size),inside plastering 12mm thick with cement mortar 1:3( 1 cement:3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standarad design: Inside dimensions 500x700mm and 45cm deep for single pipe line with one or two inlets. (Refer J&K Sanctioned Schedule of Rates 2012, Item code 20.24.2).

Making soak pit 2.5m diameter 3.0 meter deep with 45x45cm dry brick honey comb shaft with common burnt clay(non modular) brick of class designation 7.5 bricks and S.W.drain pipe 10mm diameter,1.8m long complete as per standard design. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 20.26).

Surface dressing of the ground including removing vegetation & in-equalities not exceeding 15cm deep and disposal of rubbish,lead upto 50m and lift upto 1.5m in-All Kinds of soil. by M.T with all leads & lifts complete. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 2.12).

Providing and Laying River bed material free from organic material mixed with coarse agg. In layers not exceeding 200mm thick incl.rolling with power road roller of 80-100 KN incl. all leads & lifts complete.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibrator compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge. (Refer J&K Sanctioned Schedule of Rates 2020, Item code 16.74).

Providing and Laying of good earth including carriage complete.(Refer J&K Sanctioned Schedule of Rates 2020, Item code 1.1.2).

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 part of stacked volume of earth after reducation by 20%:1 part of stacked volume of manure after reducation by 8%) flooding with watrer, dressing including removal of rubbish & surplus earth,if any with all lead & lifts (cost of sludge,manure or extra good earth,if needed,to be paid for separately). Holes 60cm dia & 60cm deep (Refer J&K Sanctioned Schedule of Rates 2020, Code No.17.14.3)

Supplying and stacking at site including royality (earth measured in stacks will be reduced by 20% for payment. (Refer J&K Sanctioned Schedule of Rates 2020, Code No.17.2)

Spreading of sludge,dump manure or/and good earth in required thickness as per directions of office in-charge (cost of sludge,dump manure or/and good earth to be paid separately). (Refer J&K Sanctioned Schedule of Rates 2020, Code No.17.8)

Supply and stacking of well decayed cow dung manure at site incl.uding (cow dung manure measured in stacks will be reduced by 8% for payment). (Refer J&K Sanctioned Schedule of Rates 2020, Code No.17.25)

Planting of trees, 2 ft to 3 ft height, in poly bags including cost of tree.

Providing and Fixing M.S flat iron tree guard 60cm dia and 2m high above ground level formed of 4nos. 25x6mm,2.25m long and 8 nos. 25x3mm 2m long vertical M.S.flats riveted to 3nos. 25x6 mm MS flat iron rings in two halves,fixed together at site with required 6 no. of 8mm dia and 30mm long bolts including painting two coats with paint of approved brand and manufacture over a coat of primer.One name plate of 1mm thick M.S.sheet of size 250x100mm shall be welded to the tree guard near the middle height and lettered CPWD/PWD/any other approved name. The tree guard shall be suitably fixed to the ground by embedding four legs of the tree guard in pits of suitable dia. and to a depth of 25cm,refilling the pits with soil and ramming,complete in all respect as per staisfaction on direction of Officer-in-charge. (Refer J&K Sanctioned Schedule of Rates 2020, Code No.17.16)

Electrical Works :- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A (Refer CPWD DSR E&M 2018 Item No. 1.10.1).

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. (Refer CPWD DSR E&M 2018 Item No. 1.12).

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (Refer CPWD DSR E&M 2018 Item No. 1.14).

2 x 1.5 sq. mm + 1 x 1.5 sq mm earth wire (1.14.1).

2 x 2.5 sq mm + 1 x 2.5 sq. mm earth wire (1.14.2).

2x10 Sqmm + 1x6 Sqmm earth wire ((CPWD DSR E&M 2016 Item No. 1.14.5)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. 3 x 2.5 sq. mm. (Refer CPWD DSR E&M 2018 Item No. 1.17.12).

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface /recess including cutting the wall and making good the same in case of recessed conduit as required (for service line) 25mm. (Refer CPWD DSR E&M 2018 Item No. 1.21.2).

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). (Refer CPWD DSR E&M 2018 Item No. 2.4).

4 way (4+12), Double door (2.4.1).

6 way (4 + 18), Double door (2.4.2).

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Refer CPWD DSR E&M 2018 Item No. 1.24).

5/6 A switch (1.24.1)

3 pin 5/6 A socket outlet (1.24.4).

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (Refer CPWD DSR E&M 2018 Item No. 1.25).

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. (Refer CPWD DSR E&M 2018 Item No. 1.26).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Refer CPWD DSR E&M 2018 Item No. 1.32).

Supplying and fixing of following rating, 240/10 KA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Refer CPWD DSR E&M 2018 Item No. 2.10).

Single Pole 6/16 amp. (2.10.1)

Single Pole and Neutral (2.10.2).

Installation testing and commissioning of wall bracket / ceiling fitting of all sizes and shapes contating upto two gls/cfl/led lamp per fitting complete with all accessories including connections etc. as required. (Refer CPWD DSR E&M 2018 Item No. 1.35).

Installation of exhaust fan in the existing opening including making good the damage,connection,testing, commissioning etc.as required. Upto 450mm sweep (CPWD DSR E&M 2018 Item No.1.50).

Earthing with GI earth pipe 4.5 meter long 40 mm dia including accessories and providing measonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. (Refer CPWD DSR E&M 2018 Item No. 5.2).

Providing and fixing 6 SWG dia GI wire on surface or in recess for loop earthing along with existing surface/recessed conduit/sub main wiring/cable as required. (Refer CPWD DSR E&M 2018 Item No. 5.18).

Installation testing and commissioning of prewired flourescent fitting / compact flourescent fitting of all type complete with all accessories and tube/lamp etc. directly on ceiling/wall including connections with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and earthing etc as required. (Refer CPWD DSR E&M 2018 Item No. 1.41).

Installation testing and commissioning of ceiling fan including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable including providing and fixing of phenolic laminated sheet cover on the fan box etc. as required. (Refer CPWD DSR E&M 2018 Item No. 1.45).

Earthing with copper earth plate 600mm x 600mm x 3mm including accessories and providing measonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 mtr long etc. with charcoal/coke and salt as required. (Refer CPWD DSR E&M 2018 Item No. 5.6).

Providing and fixing 4mm dia copper wire on surface or in recess for loop earthing along with existing surface/recessed conduit/sub main wiring/cable as required. (Refer CPWD DSR E&M 2018 Item No. 5.19).

Supplying and fixing of Angle/Baten Holder polycarbonate including making complete connnections etc as required. (Make as per annexure enclosed) (Refer CPWD DSR E&M 2018 Item No. 1.58).

Supplying and fixing of 9 watt LED Lamp. (Refer Analysis of rate annexure item No.13).

Supplying and fixing of following rating, 240/10 KA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole and Neutral 40 amp.

Single Pole and Neutral 63 amp.

Supplying of following electrical items suitable for operating on 240/230Volts AC, 50 Hz supply. Warranty two years from the date of installation

Ceiling Fan 1400 mm Sweep 5 Star rating. (Item No 6)

LED Ceiling light 12 watt (Item No 4)

LED Ceiling light 6 watt (Item No 3)

Bulk Head fitting suitable for out door use (Item No 2)

1200 mm size 18/20 watt LED Batten Tube Light fitting. (Item No 1)

Exhaust Fan 300mm (Heavy Duty). (Item No7)

Supplying and fixing of main service line 16 sqmm twin core aluminium cable unarmoured from the LT pole upto the MCB DB incluiding connections etc. as required.

Supplying and fixing of 15 watt LED Street Light complete with GI pipe bracket duly embeded along the parapet /wall etc as required.

Supplying and fixing of 30 watt LED Street Light complete with GI pipe bracket duly embeded along the parapet /wall etc as required.

Fire Fighting System :-ABC Type Multi-purpose based Fire Extinguisher (ISO 9001) CE Marked applicable on all classes of fire (Capacity 6 Kgs).

CO2 based Fire Extinguisher (ISO 9001) CE Marked applicable on sensitive equipments (e.g. Electrical) Capacity 4.50 Kgs.

Fire Bucket (4 Nos.) with stand. (complete job)

Drilling of 125 MM Dia Bore hole and installation of submersible pump including installation, testing and commissioning.

Drilling of 125 mm dia bore hole and installation of hand pump, fitting testing & commissioning of India Mark-II hand pumps provided by ODEX-115 method upto 65 mts BGL.

Extra beyond 65 mts to 100 mts BGL.

ERW MS Casing Pipe 125 mm dia minimum thickness 5.4 mm

Submersible pump set of suitable capacity and allied works . (Complete job)

Soil invesigation by way of Plate Load Test (As directed by the Engineer).

Structural Design & prepartion of drawings (As directed by Engineer).

Providing BALA (Building As Learning Aid) provisions as per drawing enlosed , including preparation of specific BALA drawings as per the directions of the Engineer.

Provision of ornamental gate complete job as per the directions of site engineer.

Enviornment Management Plan

Providing 2 mt. high corrugated GI sheet (min. thickness 0.63 mm) barricading fixed with GI hooks and nuts on frame made of MS pipes having diameter not less than 40 mm. Spacing of vertical pipes shall not be less than 3 m (average) and minimum two horizontal pipes shall be provided. Rate shall be inclusive of cost of providing all materials and fixing arrangements, including excavation, transportion to site, fixing, backfilling, removal of the complete barricading after construction work is over and rehabilitation of the site etc., with all incidental charges, leads, lifts and all taxes and duties as applicable and as specified by Engineer-in-charge. Material of barricading shall be the property of contractor after completion the work. Barricading shall be maintained throughout the construction period. It should be installed in a manner so that one cannot crawl underneath it, should be sturdy enough to bear normal wear and tear at the construction site, should not topple off and hurt someone and should be strong enough to withstand the elements, including high wind conditions. Should be erected between existing building blocks and proposed structures and along the access roads.

Provision, installation and maintenance of cautionary/warning signage, including diversion boards as per IRC specifications (SP:55, 2014) on the main road and along the access, including cost of boards and other materials required for fixing, with all incidental charges leads, lifts and all taxes as applicable from time to time and as specified by Engineer-in-charge.

Cost towards first aid and emergency response arrangements in the camp and worksite (including fire and electrical safety provisions)

Cost towards periodic health check-ups once in three months for all construction workers.

Provision for Workers

Providing of 2 number of mobile toilets 1 wet type and 1 dry type (bio-digester)

Wet type portable toilet (MS fabricated) 2 seats (1 for men and 1 for women with separate entrances), fitted with 2000 liters capacity overhead tank and 500 liters capacity bottom tank, fitted with Indian type of pot with other facilities such as tap, lighting and ventilation; and sludge tank of capacity 1000L, and stationed at a suitable place in or around 50 metres from work front. Includes cost of water, cost for emptying of bottom tank through mobile suction machine, attendent cost for looking after cleaning and operation of the toilets, all materials and labour charges, all incidental charges, leads, lifts and all taxes as applicable from time to time and as specified by Engineer-in-charge.

Dry type portable toilet (MS fabricated) (bio digestor) of approved design with 2 seats (one for men and one for women). Includes cost of water, cost for emptying of bottom tank through mobile suction machine, attendant cost for looking after cleaning and operation of the toilets, all materials and labour charges, all incidental charges, leads, lifts and all taxes as applicable from time to time and as specified by Engineer-in-charge.)

Providing of mobile drinking water counter/kiosk, fabricated from stainless steel with 300 liters capacity, with two taps and with bottom tank (300 litre holding capacity) to collect waste water and stationed at a suitable place within operational area, with one common attendant for both mobile toilet and drinking water kiosk. Cost includes charges for emptying bottom tank through suction machine, shifting cost of the kiosk from one operational area to another area, attendant cost for looking after cleaning and operation, all materials and all labour charges, all incidental charges, leads, lifts and all taxes as applicable from time to time and as specified by Engineer-in-charge

Other Environment, Health & Safety Measures

Information dissemination about type and schedule of civil works, utility shifting/damage/emergency repairs, complaint handling and all such issues that affect public/worker/near-by residents/building users close to the work zone. Dissemination modes to include display of banners/notices, distribution of handbills, organization of meetings and other appropriate means at least once in a month for the entire project duration.

Provision of Project Information Board in sheet steel and all supports, including fixing and maintenance during the entire project. Minimum board size should be 3 meters x 2 meters, with necessary information in English and local language written in black paint with white back ground. The board details and the required information will be furnished by the Engineer. The complete design, including logo and information to be displayed shall be approved by the Engineer.

Cost of environmental monitoring (air, water and noise) during entire construction period in line with parameters and frequency specified in the EMP. Ambient Air quality, Ambient Noise level and water quality monitoring.

Ambient Air Quality Monitoring for PM2.5 PM10,SO2, Nox and CO)-Noise Levels (dB) for Day and Night, Water Monitoring- Parameters specified in EMP. AAQ- Once before start of work and thereafter once in every quarter,AAN-Once before start of work and thereafter once in every month, Water monitoring - as specified EMP.

Disposal of extra earth/debris/similar unserviceable waste material by mechanical means, including loading, transporting, unloading to pre-approved dumping ground in line with EMP stipulations and as approved by Engineer-In-Charge. (SSR 2020 Code No 1.1.2)

Demolishing of unserviceable line materials by mechanical means, including crushing at approved dumping ground in line with EMP stipulations and as per direction of Engineer-In-Charge

Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete.

Sand by MT from Jammu for an avg lead of 200 Kms + by HL 200 Mtrs.

Stone agg. below 40mm size for an avg. lead of 24 Kms by MT + by HL 200 Mtr

Cement by MT from Local Market for an avg lead of 16 Kms + by HL 200 Mtrs.

Steel by MT from Local Market for an avg lead of 16 Kms + by HL 200 Mtrs.

Bricks for an average lead of 200 Kms by MT + by HL 200 Mtr

Bricks for an average lead of 200 Kms by MT + by HL 200 Mtr