Estimate for construction of ramp on bridge at RD 37030 of Bhinder Disty

Excavation of Soil using Hyraulic Excavator and hydraulic Tractor Trolly I/C cutting and loading in Trolly and transporting to the embankment locations with all lifts and leads but excluding royalty. ((a)) Disposal/carraige from All lift of leads upto 3km (Pucca).

Compaction:- Extra for laying earth/fly ash as per specifications in 20 cm. Layers and dressing but excluding cost of rolling.

Compaction:- Extra for watering the earth/fly ash laid in 20 cm layers as per specifications for compaction.

Compaction:- Extra for rolling to specifications.

Dismantling of Flexible Pavements (By Mechanical Means)-Dismantling of flexible pavements thickness above 50mm by mechanical means and disposal of dismantled materials up to a lead of 1000 meters, stacking serviceable and unserviceable materials separately as per technical clause 202 of MORT&H specifications

Water Bound Macadam Grading I: Providing, laying, spreading and compacting stone aggregates of Grading I to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of MORT&H specifications.

Prime Coat @ 0.85kg per sqm:- ((i)) Providing and applying primer coat with bitumen emulsion SS on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.85kg/sqm complete as per technical clause 502 of MORT&H specifications.

Providing and laying 25 mm thick mastic asphalt wearing course with paving grade bitumen 85/25 or 30/40 @10.2%, fine aggregates, coarse aggregates, lime filler @ 17.92% of total mix, prepared by using mastic cooker and laid to required level and slope, including providing antiskid surface with bitumen precoated fine grained hard stone chipping at an approximate spacing of 10 cm center to center in both directions, pressed into surface when the temperature of surface is not less than 100 degree C, protruding 1 mm to 4 mm over mastic surface complete as per technical clause 516 of MORT&H specifications.

Any Other