Construction of B.T. road at Ganapati Nagar 3rd Line backside of Netaji school to 8th Line Main road in Ward No-05

Scarifying the existing roadsurface and disposal of scarified materials,with with all leads and lifts etc.complete

Providing and applying Tackcoat with bitumen emulsion on prepareed surface of granular base including clearing of the road surface and spraying primer @ 0.20 kg / sqm using mechanical means as per cluse 502 of MoSRT & H srecification for road & bridge works. unit -sqm. Taking out put - 3500 sqm

Labour for scraping, cleaning the road surface applying tack coat using 3.0Kg of bitumen for 10 Sqm and laying 75mm thick built up spray grouting in two layers 37.5mm thick each layer using 0.45cum of 25mm to 40mm size hard granite metal and 12.00 Kg. penetration grade of bitumen for 10 Sqm in each layer with 0.12 Cum of 12mm size hard granite chips as key stone for 10 Sqm spreading over and laying including heating, pouring and spreading over and spreading bitumen metal and chips and rolling with PRR including hire and running charges of PRR and all other machineries but excluding cost and conveyance of metal, chips and bitumen complete as per specification and direction as per Engineer in charge.

Labour for laying semi-dance bituminous concrete with batch type hot mix plant using crushed agreegate of specific grading, premixed with bituminous binder of 60/70 penetration grade of bitumentransported to site, laid over a previously prepared surface with hydrostastic sensor paver finisher to the required grade, level & allignment rolling with smooth wheel, vibratory & tendem rollers to achive the desired compaction as per clause-508 of MoRTH specification for road & bridge works (4th revision) unit-cum,

Providing and laying bitumenious macadam with hot mix plant using crushed agreegates of specified grading premixed with bituminious binder tramsported to site, laid over a previously prepa-red surface with hydrostatic paver finisher with sensor control to the required grade level & alignment & rollimg with smooth wheeled, vidratory & tendem roller to achive the desire compaction as per clausem-504 of MoRT7H Specification for road & bridge works (4th Resion)

Providing and laying of Hot applied thermo plastic compound 2.5mm thick including reflectorysing glass beads at the rate 250gm per sqm area as per IRC.35 The finished surface to be level,uniform and free from streaks and holes etc.complete as per specification.