NIT No GE/ND-03/2025-26

Amount

M&L for wooden flooring, laminated wooden type made of high density fibre board (HDF), comprising of tongue and groove interlocking type of planks of 1210 x 193 mm size 8mm thick, commercial grade, abrasion resistance of AC-II category, over and including 6 micron polyethylene and foam cushion sheeting over the concrete surface to minimize moisture migration from the concrete including all fixing material i.e. chemical adhesive, base strip/fillets etc. veneered and matching top beading etc including taking down old existing flooring any type complete all as specified and directed.

S&F in repair 23-24mm thick PVC Jallies CNC machine cut as per the approved pattern and design as sample kept in GE Office. The PVC Jallies shall be fixed with the help of screw/nut bolt of suitable size and numbers as decided by the Engr-in-Charge. PVC Jallies shall be fixed to the existing steel frame work after replacing of rusted steel including necessary welding work complete all as specified and directed. Note : MS steel work will be measured and paid seprately. Make Rajshree/Echon or equivalent as approved by GE

S&F in repair 50 micron solar control film sticked to glass panes as per manufacturer instruction reflective type complete all as specified and directed.

M&L in repair for best quality vinyl wall paper on wall applying with necessary adhesive including matching corners and angles complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, wall aprons etc laid bedded and pointed in any mortar incl mortar screed of any description including removal of debris from site complete all as specified and directed.

M&L for 20 mm thick granite (any type ) stone machine cut bedded and jointed with grey cement slurry and pointed with white cement with pigment to match incl cutting and polishing over and including 20 mm thick screed bed in Cement Mortar 1:6 in floors complete all as specified and directed.

Dismantling wrought or mild steel work of any description not otherwise provide for in any height upto two strey incl necessary scaffolding where required complete all as specified and directed.

S&F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410-W (GdeE- 250) quality A with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing including necessary double steel scaffolding where required upto two storey bldg complete all as specified and directed.

S&F Steel work in tubular trusses confirming to Fe 410-W Gde 250 A including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 complete all as specified and directed.

S&F welded steel wire fabric n.exc 4 Kg per Sqm complete to steel member complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, incluuding Nainital or similar pattern roof coverings including necessary double steel scaffolding where required upto two storey bldg complete all as specified and directed.

S&F 4mm thick aluminium composite panel sheet of any choice colour fixed with self taping screw/bolt in any height upto two storey building including necessary double steel scaffolding where required complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 10 mm thick coloured polycarbonate multiwell sheet manufactured from high quality, UV stabilzed resins in roof covering incl necessary fittings & fixtures like aluminium strips, aluminium tee, coach screw and washers etc with silicon joints filler for fixing complete of any colour complete all as specified and directed.

M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paints over one coat of red oxide primer complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding and removing rubbish of the premises complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick (Square/Rectangular) polished area of each tile not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white of coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for non skid ceremic tiles 7 to 8 mm thick (square/rectangle) area of each tiles exc 0.11 but n.exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white /coloured cement laid over and incl 20 mm thick screed in CM 1:6 complete all as specified and directed.

M&L for glazed ceremic tiles in vertical surface of size 450X300X7 mm on 10mm thick rendering in cement mortar 1:3 set and jointed in net cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L for PU Coated cement concrete Paver tiles of size 300x300x25mm set in 15mm thick screed in Cement Mortar (1:6) including filling joints with white or colour cement complete all as specified and directed.

M&L for 10 to 12 mm thick heavy duty coloured digital vitrified parking tiles, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed in Cement mortar 1:6 as in floor complete all as specified and directed. Make: Cera/ Somany/ Orientbell

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 75mm thick Cement concrete type D- 2 1:4:8 (40mm graded aggregate) as in floor/ sub base or in like complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for Sand filling under floors tiles including watering and consolidation complete all as specified and directed.

Dismantling wall & ceiling boards and boarding of any description as in panelling ceiling, partition, cup boards etc incl cover fillets in any surfaces complete .including carefully taking down of electric fittings/fixtures from wall and ceiling complete all as specified and directed.

S&F PVC wall paneling frame made out of electric resistance welded mild steel square steel tube of size 25 mm x 25 mm x 16 SWG, size laid both walls not less than 600 mm C/C with two coat of synthetic enamel paint over a coat of red oxide zinc on frame shall be fixed to walls by means of wooden/plastic rawel plugs or gut ties PVC wall paneling shall be laminated plastic section SPUF-144 of size 250 mm x 6 mm with distance between the supporting ribs not exceeding 19 mm including necessary cutting for electrical fitting as per site requirement complete all as specified and directed.

S&F prelaminated PVC rigid foam sheet wall panelling of 5 mm thick stuck on inner frame work of 35 mm wide strips of 5 mm thick rigid foam sheet. The strips should have a groove of 6 mm width and 2 mm depth for sinking the head of screw used to fix the strips to the all and should be placed vertically at equal intervals of 300 mm C/C. The PVC strips to be fixed to the all using 65 mm long MS screws through the groove in the strip by using PVC fasters including necessary moulding work on doors, windows, pillers and opening etc complete all as specified and directed. Note:- (a) Work for fixing of wall panelling shall be got executed through manufacturers authorised applicators only under the close supervision of their technical staff. (b) The entire qty of wall panelling and their allied ancillaries shall be procured directly from the manufacturer or their authorised dealer only.

S&F PVC false ceiling with frame made of electric resistance welded semi-bright steel tube of size 38mm x 38 x16 SWG. The grid size of ceiling frame shall not exc 600 x 600mm. The frame shall be painted with two coat of synthetic enemal paint over one coat of red oxide primer. The PVC ceiling shall be Hallow multi chambered section of size 250mm x 6mm jointed to another by male and female push fitting system and will be fixed to the frame with the help of steel screws including necessary cutting for electrical fitting complete all as specified and directed.

S&F Mineral fibre ceiling boards 12 mm thick 600 X 600 mm size incl grid 25 X 25 X 1.6 mm thick GI powder coated angles 25 X 35 X 1.6 mm size ‘T’ section fixed with suspenders from ceiling etc (Armstrong RH Dune 70) complete all as specified and directed.

M&L for providing and fixing False ceiling at any height with semi perforated 12mm thick mircro tegular edge GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, (with 50mm thick glass wool) as per IS 8225 :1987, Noncombustile as per BS 476 (part-4) -1970 and light reflectance of 75-85% to be laid in true horizontal level per site requirement suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams per sqm including both sides) Comprising of main - T runners of size 15x32mm of length 3000mm, cross-T of size 15x32mm of length 1200mm and secondry intermediate cross T of size 15x32m of length 600mm to from grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod up to 1000nn length and L shape level adjuster of size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partion with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wass SS screws. The work shall be carried out as per specificatons, drawing and as per direction of Engineer-in-Charge complete all as specified and directed.

M&L for GI powder coated micro preforated micro look false ceiling with fleece lay- in- type 0.50mm thick, suitable for grid/frame module of 600mmx600mm size complete with GI powder coated grid consisting of T runner 15mm suspended at 1200mm centre to centre and cross T runner of 15mm size suspended at 600mm centre to centre suspended by 4mm GI rod from roof slab including steel fastner wall angle and T with interlocking arrangement as required for framing grid suitable for module size 600x600mm ceiling etc complete all as per specification complete all as specified and directed.

S&F in repair urinal vitreous china including waste coupling and fixing acessaries of size 375x315x620mm complete all as specified and directed. Make: Jaguar Cat Part No URSWHT-132530 or equivelent of make as specified in PS.

S&F in repairs snow white vitreous china EWC single peice type 700X370X645 mm incl seat cover and flush fittings complete fixed in floor with brass screw complete all as specified and directed. Make : JAQUAR CAT Part No: SLSWHT-6851P or equivelent of make as specified in PS.

S&F in repair vitreous china wash down water closet (Pedestal pattern) white complete including provision of lime concrete bedding, and connecting to flushing cistern with plastic water closet seat white closed pattern with flat bottom & cover & mild steel chromium plated or aluminium hinges device & flush pipe of polythene of low or high density of PVC 32mm dia for low level PVC cistern complete all as specified and directed.

S&F in repair wash hand basin vitreous china white, counter basin of size 540X480 mm including making good the surface/joints with white cement complete all as specified and directed. Make : CERA CAT Part No: 1009 or equivalent of make as specified in PS.

S&F in repair 15mm bore chromium plated single lever wash hand basin piller cock quarter turn complete all as specified and directed. Make: Jaguar Cat Part No OPR-15001PM or equivalent of make as specified in PS.

Taking down plastering on brick or stone walls, etc. incl racking out joints, hacking for key, scrubing down with water, etc.in cement or cement lime plaster, any description complete all as specified and directed.

M&L for 15 mm thick ready mix plaster on brick or concrete surfaces of wall in two layers (thickness of each layer not more than 10 mm finished even & smooth. The first layer shall be prepared as per manufacturer instructions, relevant IS code and Engineering practices. The complete work of this item shall be executed only by a skilled labour of the trade complete all as specified and directed by Engineer in Charge.

M&L for 5mm thick Ready mix plaster on concrete surfaces on ceiling finished even and smooth complete all as specified and directed by Engr-in-Charge.

M&L for providing PMM (Polymer modified cementitious mortar) :- (i) Dry sub strata surface and free of debris & dust (ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes). (iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 25 mm thickness. Note : Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairly rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use. (iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufacturer complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coat of weather proof exterior emulsion extra premium 100% acrylic emulsion as approved over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed by Engr-in-Charge

M&L for preparation of new plastered surface of ceiling and applying three coat of white wash complete all as specified and directed.

Taking down chowkhats or frame without taking off shutters n.exc 1.50 sqm each complete all as specified and directed.

Taking down chowkhats or frame without taking off shutters exc 1.50 sqm but n.exc 4.0 sqm complete all as specified and directed.

S&F powder coated aluminum door using 96.6mm X 44.8 mm X 1.6 mm aluminium chowkhats 84.0 x44.7mmX1.6mm section vertical styles 101.60X44.88X1.6mm rails including mortice lock vertical type mild steel 100 mm size (Make : Godrej/Harrison) 02 Nos tower bolt 150 mm , door handles, SS butt hinges 125 mm 04 Nos, hydraulic door closer and fittings and bottom panel with 12 mm thick laminated Novapan and top panel with 5.5 mm thick plain glass fixed with snap beading rubber of suitable size and each shutter n.exc 0.95 mtr in width Make of glass (MODI/FLOAT/ATUL) complete all as specified and directed.

S&F powder coated aluminium window using 63 mm X 38 mm X 1.6 mm chowkhats with 48mm X 48 mm X 1.6mm openable section as in shutter incl 5.5 mm thick glass panes of approved make with rubber for fixing glass and including builders hardware such as aluminium handles 100 mm -02 Nos, tower bolts 100 mm 02 Nos, hooks and eye – 02 Nos 150 mm , butt hinges 100 mm 04 Nos etc complete all a specified and directed by Engr-in-Charge.

S&F aluminium ornamantal grill 8mm dia 75x95mm aperture complete incl U channel complete all as specified and as directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F powder coated aluminium partition using 95.6 mm x 44.8mm x 1.6mm frame work with 12 mm thick exterior grade veneered particle boards with decorative veneers on both faces/6 mm thick frosted glass as directed by Engr-in-Charge including aluminium beading for fixing board (Make: GLASS Make MODI/ FLOAT/ ATUL).

S&F 18mm thick MDF board pre laminated both side fixed with aluminium screws as in storage cabinet/cub board incl all fittings fixtures and builder hardware complete all as specified and directed.

S&F 100 mm wide Venetian blinds vertical type incl guide rail, pulling thread etc incl taking down existing pelmets complete all as specified and directed.

S&F ZEBRA venetian blinds horizontal type incl guide rail, pulling thread etc incl taking down existing pelmets complete all as specified and directed.

Demolition of brick work built in cement mortar incl all arches , pillars and quoin etc complete all as specified and directed.

M&L for red stone on dholpur stone louvers & jallies 25 to 30 mm thick incl all moulding rounding ornamental work complete all as specified and directed by Engr-in-Charge

M&L for 900X100X100 mm ornamental red stone dholpur stone incl all moundling, weathering, throating & rounding set and joineted in CM 1:4 complete all as specified and directed by Engr-in-Charge

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius in Cement Mortar 1:6 with old size bricks complete all as specified and directed.

M&L for Treatment of roof with reinforced elastomeric liquid waterproofing membrane of 400micron thickness having SRI of 130, tested as per ASTM E 1980 (with Solar Reflectance and Thermal emittance tested as per ASTM C 1549 and ASTM C 1371, respectively). The coating should have water absorption less than 1% as per IS: 101 (P-7/Sec-1) 1989, with the ability to resist heat yp!e 1200C as per IS: 101 (P-7/Sec-3) 1990 having VOC less than as per ASTM D 3960 and should have excellent resistance to transmission of ponded water up to 3.5 bars of pressure for 7-days.lt should also be resistant to Ammonia solution, Sodium nitrate, Sodium hydroxide, along with water and soap solution as per IS: 101 (P-7/Sec-2)1990. The waterproofing membrane will be laminated with 25—40-micron thick transparent Nano modified composite crosslinking polymeric coating with a minimum of 40% solid content as per IS: 101 (P-8/Sec-6) 1993 and also should pass Impact test as per IS: 101 (P5/Sec-3) 1988 along with having dust and water repellent & anti-graffiti property passing Scratch hardness test of 500g as per IS: 101 (P-5/Sec-2) 1988. It should also pass Cross Cut Adhesion test as per IS: 101 (P-5/Sec-2) 1988. The Polymeric coating should have a self-cleaning and easy-to-clean property with excellent weather stability and DPR (Dirt pickup ratio). Surface preparation includes pressure wash cleaning to remove all dust, fungus, etc., with pressure washer after repairing the existing roof having old bitumen membrane by filling cracks, potholes, holes with waterproofing compound having compressive strength as per IS-4031 part-6-1988 & permeability of water as per IS2645-2003 complete all as specified and directed. Note :- Repairs of existing roof where required for said treatment shall also inclusive under unit rate. The work shall be got done through manufacturers authorised applicators only under the close supervision of their technical staff. Make: Ms STP Limited/ Ms IWL India Limited/ Ms Asian Paints Ltd/ Ms Fosroc Chemicals

S&F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 110 mm complete all as specified and directed.

Removal of debris from kashmir house in a loading truck of 200 cubic feet and removal to a distance n.exc 20 KM complete all as specified and directed. Note : (a) Due to conjuction of space vehicle will be stand atleast 500 mtr from the debries location (b) Cost for stacking of debries from various loc is also included in the quoted rate. (c) The vehicle shall be loaded by the labour so sufficient labour shall be arrange by the contractor. (d) Contractor shall be responsible to submit the Dvr Lic, Veh RC, Police verification for obtaining permission of veh and lab from H block.

R D ENTERPRISES (BID ID -3294424)

BEHAL TRADERS (BID ID -3295544)

sony engineering works (BID ID -3301060)