Line shifting and street lighting work at 05 major intersections of Gorakhpur (eg Ambedkar Square, Shastri Chowk, Townhall Chowk, Vijay Chowk and Ganesh Chowk). (Work related to electrification)

Amount

Supply and laying of aluminium conductor PVC insulated armoured served sheahed cables 1100 Volts grade at a depth of 750 mm below ground level over a cishion of 75mm.thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S.clamps etc.of suitable size or as directed by the engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.

(Q) 185 sq.mm 3½ core L.T. Cable (Make:- Polycabe, Havells, Finolex)

Supply and fixing of palm/pin type cable, socket (lugs) to the cable leads, insulating with tape, and making connection etc complete in all respect in following size.SOR-18 S.NO-504

(m) (ii) 240mm2

Supply and laying of 3 core standered aluminium conductor 300 sqmm XLPE (cross linked polyethylene) insulated PVC bedded galvanised flat steel strip armoured cable confirming to I.S 7098 (part -2 with latest amendments) 33000 volts grade complete in all respects the armouring of the cable shall be property connected with the earth conductor by clamps with brick sand etc. asper UPPCL Norms (Make:- Polycabe, Havells, Finolex)

S/Laying of HDPE Pipe 110mm dia pipe for 33KV cable.

S/F of double pole structure with S.T. pole designated to 410 SP-71, 13 M long including the cost of channel stay 4 no.,disc,pininsulator , pole, excavation ,erection,groutting, plinth & painting etc. complete in all respect work as per dorection of E/I & as per norms of U.P.P.C.L.

S/F of 6 inch dia GI pipe complete in all respect as per direction of E/I.

S/F of outdoor type cable end termination jointing kit suitable for XLPE cable etc all complete. As per diraction of E/I. (Make:- Raychem, M-Seal, Birla, 3M)

300 sq mm. (outdoor)

S/E of Stay set at least 3.5 mtr. Away from the pole complete with galvanised 19mm. dia. & 1.80 long stay rod 30X30cm.x0.63cm. Anchor plate thimble stay clamp, stay insulator, 19x600 mm., double screw tighter, 7/3.15 mm G.I. stay wire in 1:3:6 cement complete in all respect.

S/Painting of pole with 2 coat of "Al" paint over one coat of red oxide including cleaning of dust vermin & making good complete in all respect. As per direction of E/I.

Supply and laying of 3 core standered aluminium conductor 240 sqmm XLPE (cross linked polyethylene) insulated PVC bedded galvanised flat steel strip armoured cable confirming to I>S. 7098(part-2 with latest amendments) 11000 volts grade complete in all respects the armouring of the cable shall be property connected with the earth conductor by clamps with brick sand etc. (Make:- Polycabe, Havells, Finolex)

S/F of outdoor type cable end termination jointing kit suitable for XLPE cable etc all complete. 240 sq mm. (outdoor) (Make:- Raychem, M-Seal, Birla, 3M)

S/F of Double pole structure of S.P.-55 S.T. pole 11.00mtr. Long complete with all accassories including grouting & making plinth above 20cm G.L. in 1:3:6 C.C. with excavation and back filling etc. complete in all respect as per diraction E/I.

S/F of 100 mm dia G.I. pipe "B" class with M.S. clamp fixing with pole for calbe etc complete in all respect.

TRANSFORMER

400KVA 11KV/433V Dyn11 Oil Filled Hermatically sealed transformer with corrugated wall and without conservator type design & Top normal porceilein bushing for HT and LT with Off load tap switch of range +5% to -5% insteps of 2.5%. Losses (as per IS 1180 Energy Efficiency level 2, Star 1) Max Losses at 50% Loading: 1860 Watts and Maximum Losses at 100% Loading: 5300 Watts. Impedance shall be 4.5% (IS Tol.) Temperature rise limits for Oil/Winding-40/45 degrees.

LT SECTION

INCOMMING:

1 Nos.800 Amp 415 volt grade 35 MVA, 50 KA 4P MDO ACB complete with. Microprocessor release having inbuilt overload protection with time delay, short circuit protection with time delay and instantaneous alongwith earth fault protection.

Safety shutter & 6 NO+ 6 NC contacts.

3 nos cast resin current transformer of 800/5 (for 400 KVA TRF) & ratio class 1.0 for metering, 15 VA Burden.

Multi Function Analyzer Digital meter 415V AC CT ratio/5 auxiliary 230 V.

1 set of three RY B indicating lamps.

Red/green/amber ON/OFF/ Trip indicating lamps.

Trip circuit supervision Relay (95)-415 VAC

Under voltage relay(27)-415 V AC.

Over voltage relay(59)-415 V AC

Illuminiated push button for healthy circuit.

1-CT epoxy cast 800A/5 (for 400 KVA (TRF) & 15 VA Burden for APFC relay.

Terminal to receive 1000Amp Al. Cables (for 400 KVA TRF)

BUSBAR: 1000 Amp 4 Pole Aluminium

OUTGOING

1 Nos. 400 Amp, 50 KA, TP with neutral link MCCB with thermal megnatic release

1 Nos. 315 Amp, 50 KA, TP with neutral link MCCB with microprocessor release

1 Nos. 250 Amp, 50 KA, TP with neutral link MCCB with thermal megnatic release

1 Nos.125 Amp, 50 KA, TP with neutral link MCCB with thermal megnatic release

1 Nos.100 Amp, 50 KA, TP with neutral link MCCB with thermal megnatic release

1 Nos.63 Amp, 50 KA, TP with neutral link MCCB with thermal megnatic release

OUTDOOR ENCLOSURE

Outdoor type enclosure having construction of Galvanised Sheet Steel having 2mm thickness for Load bearing member and 1.5mm thickness for Non Load bearing members with 4 mm base frame. The Enclosure shall have IP54 degree of protection for HT & LT switchgear compartment & IP54 degree of protection for Transformer compartment. The enclosure exterior shall be Powder Coated (colour Light Gray & D.A.Gray). Each compartment will be provided with the door and pad locking arrangement. The Compartment illumination lamp with door operated switchy shall be provided for MV & LV compartment (MAKE ABB/SIEMENS/SCHNE IDER Electrice)

Construction of Transformer plinth of size 1.7x1.66x1Mtr. With all material required for proper completion as per diraction E/I.

S/F of 11KV D.O. fuse set etc. complete in all respect.

S/F of 11KV pin insulator with pin and nut etc. complete in all respect.

S/F of cable root marker CC make complete in all respect as per direction E/I.

HDPE pipr 25 mm dia with Elbow and Shocket.

Dismantling if rail/S.T. pole including removing of channel disc insulator, pin insulator, light etc. complete in all respect as per direction of E/I.

11 Kv HT feeder pillar as per GTP/Drawing approved by UPPCL.

A type LT Distribution piller box as per GTP/Drawing approved by UPPCL.

B type LT Distribution piller box as per GTP/Drawing approved by UPPCL.

C type LT Distribution piller box as per GTP/Drawing approved by UPPCL.

Supply and laying of aluminium conductor PVC insulated armoured served sheahed cables 1100 Volts grade at a depth of 750 mm below ground level over a cishion of 75mm.thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S.clamps etc.of suitable size or as directed by the engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc for 16 sq.mm 4 core

Supply and fixing Following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. for 25 AMP

Supply and fixing of LED street light fitting having die cast aluminium body and diffiuser with driver set suitable for 140 to 150 watt. Confirming to IP 66 protection complete in all respect. (Make:-Phlips, Wipro, Havels)

Supply and fixing of LED street light fitting having die cast aluminium body and diffiuser with driver set suitable for 175 to 200 watt. Confirming to IP 66 protection complete in all respect. (Make:-Phlips, Wipro, Havels)

Supply and laying of aluminium conductor PVC insulated armoured served sheahed cables 1100 Volts grade at a depth of 750 mm below ground level over a cishion of 75mm.thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S.clamps etc.of suitable size or as directed by the engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. for 25 sq.mm 3½ core.

Supply and fixing of palm/pin type cable, socket (lugs) to the cable leads, insulating with tape, and making connection etc complete in all respect in following size. (Make:-Dowel, Comet, Braco)

S/F of HDPE (DWC) pipe coupler for jointing of pipe of size 90/76mm OD/ID make Dura line or Reck etc complete in all respect. As per E/I.

Supply of Fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155mm and base plate 12mm thik) having 3mm thikness with singal arm bracket (1 Mtr Length) on RCC foundation including the cost of foundation, foundation, bolts, excavation & black filling and Required T&P complete in all respect. (Make:-utkarsh/Subham/Bajaj)

Supply of Fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155mm and base plate 12mm thik) having 3mm thikness with Double arm bracket (1 Mtr Length) on RCC foundation including the cost of foundation, foundation, bolts, excavation & black filling and Required T&P complete in all respect. (Make:-utkarsh/Subham/Bajaj)

S/L of HDPE (DWC) pipe for road crossing etc. (exept for cable support on pole) at a depth of 750mm below G.L. for L.T. calbe carriar as per direction of E/I. make Dura Line or Rack of size . 90/76 mm OD/ID

S/Making suitable earthing of H.T./L.T over head line pole with 2.5m long 20mm dia G.I Rod with 7/16 SWG. G.I Wire as per UPPCL complete with all material labour T&P requird for propet completion of work.P.S.R.

NOVA CONSTRUCTION

INDIA SUPPY CORPORATION