CERTAIN MISC B R REPAIR WORKS FOR ROOF TREATMENT SANITARY FLOORING ETC AT JASAI MIL STN UNDER GE ARMY BARMER

Amount

M&L for demolition of concrete in ground floors and paving n exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in subbase of floorS&Finishing the surface even & smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement, including making joints to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:2 by weight complete all as specified and directed.

M&L for 100mm thick cement concrete type D-2, 1:4:8 (40mm graded crushed stone aggregate) finishing cement concrete surface even and smooth without using extra cement as specified and directed.

M&L for 100 mm thick cement concrete type B-2, 1:2:4 ( 40 mm graded crushed stone aggregate) finishing cement concrete surface even and smooth without using extra cement as specified and directed.

M&L for providing cement concrete type C-1 (1:2:4) using 20 mm graeded stone aggregate as in lintel upto 1.5m clear span. Cill, steps; seismic and other milar bands, plinth courses, string courses, lacing cources, parapets and railings upto 60 cm in height, coapings, kneelers, apex stones bed plates, water troughs, fixing AC sheet pillar and the similar items including s, incl weathering, slighting rounded or chamfered angles and throating including form work complete all as specified and directed

M&L for demolition Stone slabs and tiles of any description or thickness in floors aprons etc laid dry or laid dry and pointed complete all as specified and directed

M&L for 18-20 mm thick machine cut kota stone slab flooring set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20 mm thick screed bed in cement mortar 1:4, rubbing, polishing complete all as specified and directed.

M&L for kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete inlcuding 10 mm thick rendering in vertical surface of brick / PCC block wall in cement mortar 1:4 complete all as specified and directed.

M&L for granite 16-18 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm thick bedding layer of cement mordat 1:6 complete all as specified and directed.

M&L for 300mmx300mmx10mm thick non skid polka dots parking floor paver tiles with grey cement and pigment, over and including 15mm thick screed in CM (1:4), set jointed & pointed in neat cement slurry in floors complete all as specified and directed.

M&L for 60mm thickness machine pressed precast interlocking paver block any shape and size conforming to IS - 15658-2006 of M-40 grade with grey cement and no pigment complete all as specified and directed.

M&L for rounding to edges, one edge, of stone slabs / kota stone, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L for sand filling 25mm thick under floors or in foundations inc. watering and consolidation complete all as specified and directed.

M&L for dismantling floor, hearth or wall tiling including cement mortar bedding, removing serviceable tiles to stores and removing debris outside the MD land complete all as specified and directed.

S&F non-Skid ceramic Coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F Vitrified ceramic tiles in light shade 10mm thick (square/ractangular) polished, area of each tiles not exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

All as per srl item no 17 above but in skirting over cement mortar backing plaster in CM1:3 10mm thick complete all as specified and directed.

S&F glazed ceramic coloured tiles 350 x 250 x 7mm /450 x 350 x 7mm thick, in vertical surfaces and such as skirting, dados and riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match inluding 10mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F non-skid ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for demolition of brickwork or stone, PCC block, boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for precast-cement concrete block masonary with solid blocks type D-1, 1:3:6 (20mm graded aggregates) exc 10 cm in width and setting in CM 1:4, complete all as specified and directed.

M&L for 15 mm rendering in CM 1:4 on fair face of block masonary wall or on concrete surfaces finished even and fair with complete all as specified and directed. (WPC is measured and paid seprately)

M&L for demolition of cement concrete ( unreinforced) in roofs, floors (other than ground floors) beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-0, using 12.5 mm graded aggregate as in roof for maint. the uniform slope etc any thickness at any height and in any position complete all as specified and directed.

M&L for Applying evenly a coat of bituminous primer confirming to IS 3384 - 1986 @ 0.40 Kg/Sqm complete all as specified and directed.

M&L for APP based polymeric membrane minimum weight 3 Kg/Sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/Sqm) land on primed surface by forced application complete all as specified and directed

S&F for SRI cool roof anti skid tile of size 300mmX300mmX10mm thick exceeding 0.06 sqm but not 0.11 sqm, UV Rays resistant, on terrace/roof surface over 15mm thick screed bed in CM (1:4) set and jointed, grouted and flush pointed with epoxy Based Waterproof Tile Filler to match the colour of tiles including over Geotextile 120Gm non woven 100% polyster of thickness 1 to 1.25mm bonded to the water proofing membrane with intermittent touch by heating the membrane by butane torch as per manufacturer's instruction complete all as specified and directed.

M&L for taking down chowkat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site complete all as specified and directed.

M&L for taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

Supplying and fixing in opening as per drawing solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consistiing of frame made out of MS tubes for top and bottom rail MS frame, shall be covered with heat moulded channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fited in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F 100mm size SS butt hinges and fixed to PVC frame /Wooden Frame and angle iron frame by necessary welding complete all as specified and directed.

S&F Extruded aluminum alloy handle fabricated type anodized, 150mm size complete all as specified and directed

S&F aluminum anodized barrel tower bolts extruded section, 150mm size complete all as specified and directed

M&L for taking down chowkat or frames with shutters (without taking off shutters from the frames) area exc 1.50 sqm not exc 4.00 sqm each complete all as specified and directed.

S&F for pressed steel frames of size 165X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate etc. complete all as specified and directed.

S&F for pressed steel frames of size 105X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate etc. complete all as specified and directed.

Material and labour for pCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and directed.

S&F second class hard wood 35mm gauged and skeleton shutter factory made without sash bars open rebated and prepared to receive gauge etc. top, bottom and lock rail, styles, edges of framing champhered or rounded fitted with cut and mitered wooden beads for securing glass, etc; size of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F factory made second class hard wood plain framed panelled shutter (Two panel) with lock rail and pannel of 9mm thicks BWP commercial ply or 12mm veneered parlide board with commercial vereered on both faces the size of rails and style as per IS-1003 (Part-I) kiln seasond and chemicadly pressue treated 35mm thick all as specified and directed.

S&F 200 mm long aluminium barrel tower bolts stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F 300 mm long aluminium sliding door bolt, anodised, with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, over 10cm in width or girth, not otherwise specified with two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for resecuring or easing and adjusting without taking down shutters of any description exc 1 Sqm but n.exc. 2 Sqm each complete all as specified and directed.

M&L for taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each and Refixing in same opening after cutting by chishel or hand saw, peeling by plane, fixing/ re-placing of hinges, repairing etc including all nales screws, pieces, small let in for making good where hinges, etc. have been removed from chowkhats or frames, shutters, etc. including painting or oiling to match, if required complete all as specified and directed. (Note : Hinges shall be measured and paid separately)

M&L for anodised aluminium frame for doors, windows, ventilators with one or more rebates including grill and joining cleat for fixing etc.complete all as specified and directed

S&F anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed

M&L for anodised aluminium window and ventilator shutters, side hung type without sash bar aluminium section weight 0.55Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 no) hinges type B-21 100 mm long (2 no) suitable handle(1 no) complete all as specified and directed etc complete all as specified and directed

S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed

S&F brass 4 levers mortice lock, vertical type, size 100mm for aluminium door complete all as specified and directed.

M&L for repairs to existing aluminium door/ window shutter including frame with completely/partially taking down door shutter and tightening of all screws, including refixing of loose hinge, handle, lock, aluminium plate & floor door stopper complete all as specified and directed.

S&F Aluminium door closer hydraulically aluminium die cast body regulated designation No. 2 universal type (ISI Make) suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 Kg complete all as specified and directed. Make :- Everest/Prabhat

M&L for hacking out old broken glass [any thickness, size, quality or description] from metal frames including punching or drilling out old glazing pins / spring clips complete all as specified and directed.

S&F sheet glass, ordinary quality 3mm thick fixed with oil putty size of glass not exceeding 0.50 Sqm in each pane complete all as specified and directed

S&F for 3mm thick figured glass, pin head type and glazing with putty in square not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth 0.50mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F in repair 25mm dia stainless steel curtain rod with fancy type fixing brackets, stops, rollers etc. complete all as specified and directed by Engr-in-charge. (Note : Entire work will be done/ executed in patches of any qty and any size all as specified by Engr-in-charge)

S&F in repairs aluminum anodised barrel tower bolts of extruded section 150 mm long, bearing ISI mark, complete all as specified and directed.

S&F in repairs aluminum aodised sliding door bolts of 300mm long with hasp and staple(bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, bearing ISI mark complete all as specified and directed.

S&F in repairs 200 mm long aluminium barrel tower bolts stove enamelled black, with bright bolt and fixed complete all as specified and directed

S&F in repairs Aluminum anodised bow handle, bearing ISI mark, fabricated type extruded section of 150mm long complete all as specified and directed.

S&F in repairs 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed

Supply and fixing in repair 100 mm MS butt hinges medium weight cold rolled mild steel ISI marked fixed with wooden screws complete as specified and directed.

S&F in repair Aluminium door closer hydraulically aluminium die cast body regulated designation No. 2 universal type (ISI Make) suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 Kg complete all as specified and directed. Make :- Everest/Prabhat

S&F in repair for mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and directed.

M&L for dismantling of Wall panneling and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all as specified and directed

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet incluseive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and directed.

M&L for 4 mm thick E-board Tile false ceiling with powder coated GI snap grid frame work complete all as specified and directed include all necessary drilling, cutting making good and necessary arrangement to fix electrical item as under:- (a) 25x25x1.5 mm thick GI Tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders with adjustable clamps and dash free fastners plugging in RCC slab placed @ 600mm centre to centre from perimeter wall. (b) 25x25x1.5 mm thick GI angle powder coated plugged @ 600mm center to center along perimeter of wall. (c) Fixing of 4mm thick E-Board tiles (Make Everest) of size 595x595 mm of approved texture, and finished complete with two coats of oil emusion distemper on ceiling of approved Tint/ Colour shade over a coat of Primer, complete all as specified and directed. NOTE: The complete ceiling work shall be done as per manufacturers instruction and directed.

M&L for dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges in large patches as in roof covering complete all as specified and directed.

S&F Prepainted galvaiume aluminum zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping crews as specified complete all as specified and directed

M&L for dismantling structural steel work including doors gates but excluding framed truss etc complete all as specified and directed.

S&F for hollow, rolled sections, MS Pipe as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conf to Fe-410-w or E -250 quality A complete all as specified and directed.

M&L for applying two coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation for hollow rolled section as in main and cross beams complete all as specified and directed.

Taking up or down existing GI Tubing 15 mm dia & connections including cleaning for refixing or removal to store complete all as specified and directed

Taking up or down existing GI Tubing 20 mm dia & connections including cleaning for refixing or removal to store complete all as specified and directed.

M&L for refixing only old steel tubing of 15 mm dia with connections obtained from taking down in old or new position fixed to wall, ceiling or laid in floor complete all as specified and directed.

M&L for refixing only old steel tubing of 20 mm dia with connections obtained from taking down in old or new position fixed to wall, ceiling or laid in floor complete all as specified and directed.

S&F 15 mm bore galvanized iron tube medium grade with all fittings such as bends, elbows, socket, reducer and fixed to wall, ceiling or laid in floors complete all as specified and directed.

S&F 20 mm bore galvanized iron tube medium grade with all fittings such as bends, elbows, socket, reducer and fixed to wall, ceiling or laid in floors complete all as specified and directed.

M&L for dismantling of existing water tanks capacity n exc 500 Ltr and removing to store complete all as specified and directed.

S&F rotational moulded polethylene water tank of 500 Ltrs capacity ( cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I, including ball valves 20mm high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed ( min wt.15mm-142gms/20mm-210gms, 25mm-455gms, 40mm-690 gms ) complete all as specified and directed.

M&L for dismantling of existing water tanks capacity exc 500 Ltr but n exc 1000 Ltr capacity and removing to store complete all as specified and directed

S&F rotational moulded polethylene water tank of 1000 Ltrs capacity ( cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I, including ball valves 20mm high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed ( min wt.15mm-142gms/20mm-210gms, 25mm-455gms, 40mm-690 gms ) complete all as specified and directed.

Labour only for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. exc 250 Ltr but n exc 500 Ltr complete all as specified and directed.

Labour only for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. exc 500 Ltr but n exc 1000 Ltr complete all as specified and directed.

S&F in repair 15 mm dia bib tap, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

S&F in repair 15mm bore pillar tap cast copper alloy fancy type with capston heads, chromium plated screwed down high pressure, with or without letters Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipes and fixed all as specified and directed.

S&F in repair 15mm bore CP fancy type stop valves/angle cock, cast copper alloy, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair two way 15mm bore CP fancy type angle cock, cast copper alloy, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair 15mm bore two way Bib taps (for health faucet/jet spray) fancy type, chromium plated, cast copper ally with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm bore centre hole basin mixer fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' and `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed.

S&F in repairs chromium plated swivel shower roses with or without swivel joints, for fixing with 15mm pipe fixed complete all as specified and directed.

S&F in repair Sheet corner glass shelf 250mm wide assembly consisting of 5.5mm thick sheet glass with chromium plated bracket guard and railing complete all as specified and directed.

S&F in repair 20 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair 15 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair bib taps 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. (minimum wt. 90gms).

S&F in repair 15mm bore pillar tap of PTMT any colour high prssure screwed for iron pipe and fixed with long shank and cup (concealled type) (min mt 15 mm -110 gms) complete all as specified and directed.

S&F in repair brass chromium plated Tubular towel rail 20 mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair PVC connection 15mm bore length not less than 450 mm long with both ends PTMT nuts complete all as specified and directed.

S&F in repairs 32/40 mm bore waste fittings, brass, chromium plated for sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair 32 to 40mm dia PVC waste pipe for WHB/sink/Urinal complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete including 'P' or 'S' trap and including plastic water closet seat cover with flat bottom and cover with MS Chromium plated hinge divice ISI marked complete all as specified and directed.

S&F in repair vitreous china squatting pan ORISSA pattern size 580mm x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed.

S&F in repair Vitreous China urinals, half stall, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F in repair vitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plug, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F in repair 10 Ltrs PVC valveless syphonic action type flushing cistern low level white, with inlet ball valve, float and handle including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and directed.

M&L for cutting chases, pinning in making good to facing on brick walls & pointing in CM 1:3 for concealed water tubing cutting n exc 10 cm girth all as specified and directed.

M&L for preparation of old surfaces of walls including cornices, pillars, etc (plastered or unplastered) by brooming or steel wire brushing, scrapping down smoke spot moulds, moss efflorescent salts and trading oil greasy spot and applying one coat of white wash on walls complete all as specified and directed.

All as per ser Item No. 116 above but applying one coat of cement base paint as camouflage / ordinary pattern complete all as specified and directed.

M&L for preparing of old painted surfaces of walls and taking down complete removal of existing treatment, and applying two coat of cement base paint as camouflage pattern /ordinary pattern over one coat of primer all as specified and directed .

M&L for preparation of old surfaces of ceiling (plastered or unplastered) by brooming or steel wire brushing, scrapping down smoke spot moulds, moss efflorescent salts and trading oil greasy spot and applying one coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of old plastered surface of wall washing, rubbing down and stopping of distempered, painted surfaces and applying one coat of oil emulsion distemper of approved tints complete all as specified and directed.

M&L for preparation of old plastered surface of ceiling washing, rubbing down and stopping of distempered, painted surfaces and applying one coat of oil emulsion distemper of approved tints complete all as specified and directed.

M&L for preparation of old decorated wooden surfaces of any description, not otherwise described over 10cm width & girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old decorated steel surfaces of any description, not otherwise described over 10 Cm width & girth and applying one coat of synthetic enamel paint as camouflage / Ordinary pattern complete all as specified and directed.

M&L for taking down cement plaster on stone masonry/Brick Masonry incl racking out joints, hacking for key scrubbing down with water complete all as specified and directed.

M&L for 15 mm rendering in CM 1:4 on fair face of wall or on concrete surfaces finished even and fair with water profinfing compound (WPC) complete all as specified and directed.(WPC Measured seprately)

M&L for 15 mm rendering in CM 1:6 on fair face of wall or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm rendering in CM 1:3 on fair face of ceiling or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound (For external new plaster surfaces)

M&L for preparing of new plastred/ surfaces of walls and applying Two coat of cement base paint over one coat of Primer as camouflage pattern / ordinary pattern all as specified and directed .

M &L for preparation of new plastered surface of wall and applying two coat of oil emulsion distemper of approved tints complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying two coat of oil emulsion distemper of approved tints complete all as specified and directed.

M&L for complete removal of existing treatment incl preparation of wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint of required shade, Make Apex Ultima of Asian Paint or Long Life of Berger or Excel Everlast 12 of Nerolac, having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.67 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, over application of wall care putty average thickness 2-3mm thick at any location on old plastered or unplastered surfaces of walls complete all as specified and directed.

M&L for repairing of RCC roof projection, chajjas, roof facia, column etc by necessary preparation i.e chipping, scrapping, cutting, chiseling avg thickness 50mm and cleaning exposed reinfocred surfaces of damaged, loosed RCC surfaces and applying rust remover on (CICO Clean-o rust) in two coats over rusted reinforcement surface of RCC members and providing anti corrosive coating with two component epoxy based zinc rich primer/Rust passivation Inhibitor coat at the rate of 2-3 sq. mtr/Ltr not less than 50 microns dft with CICO ZINCILATE-500 or equivalent to reinforcement surface as per manufacturer’s instructions including all machinery, tools tackles and clearing of debris. Make: CICO clean-O-rust, CICO ZINCILATE-500 or equivalent in Fosroc/Dr Fixit/ACC/L&T/STP and apply one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5 mm graded stone aggregate and reinforced with welded XPM mesh of weight RCC using coarse sand in patches areas including plastering 10 mm thick with 1:4 cement mortar and apply two coat of cement base paint over a one coat of cement primer complete all as specified and directed. NOTE:Cost of formwork and welded mesh including scoffolding shall be deemed to be included

M&L for dismantling of posts or struts (wood, steel or RCC) any section embadded in concrete, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

M&L for dismantling fencing wire mesh, any type complete all as specified and directed.

Supply only chain link MS galvanized fencing size or type complete all as specified and directed.

Fixing only chain link fencing including line wires any mesh size and type of standard rails complete all as specified and directed.

S&F Hand rails, Post, Pillar, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running round bars, flat iron for doors, balusters, post, nosing to steps including embeding in concrete and Mild steel screw bolts with hexagonal or square heads at aone end and screwed the other to be fitted with washer and one hexagonal or square nut exc 15cm and n exc 22 cm long, screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 ® complete all as specified and directed.

M&L for excavation in post holes in any type of soil, n exc 0.50 cum in each post, getting out returning, filling in and ramming earth or broken rubble mix with earth around in layers n exc 25 cm watering and removing surplus soil to a distance n exc 50 M and making good surface complete all as specified and directed.

M&L for cement concrete 1:3:6 of type C2 (using 40mm graded stone aggregate) as in filling and mass concrete and Concrete wall complete all as specified and directed.

M&L for demolition for ( Rcc jhali) ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling complete all as specified and directed

M&L for providing precast cement concrete louvres and jallies of type B0 1:2:4 (12.5mm graded aggregate) set in cement mortar 1:4, of 40mm thick (measured solid), including all mouldings but excluding frame complete all as specified and directed.

M&L for servicing of magzine and ESH iron door (any size), making it operational including application of greas, cleaning of sliding channel, making good defective parts like wheel, hinges, iron frames sliding channels as required, including welding as required, maintaining slider door or openeable door to operative condition including making good of distrubed adjoinning plastered/unplastered surfaced of wall as brick/stone work/PCC etc, throughtout the period of contract complete all as specified and directed. (Note: Unit rate quoted against this item shall deemed to be inclusive of all the above provision per unit i.e. each shutter and shall be assumed to be inclusive of arrangement for fixing magazine/ESH doors by engaging cranes (Hydraulic)/ manual methods as per site requirement.

M&L for servicing of iron door (size 3.70 x 3.90) m, front open, making it operational including application of grease, cleaning of sliding channel, making good defective parts like hinges, stopper, icluding welding if required, making operational throughtout the period of contract complete all as specified and directed. (Note: Unit rate quoted against this item shall deemed to be inclusive of all the above provision per unit i.e. each shutter and shall be assumed to be inclusive of arrangement for fixing iron doors by engaging cranes (Hydraulic)/ manual methods as per site requirement.

M&L for chipping and cleaning the surfaces to receive the coating or treatment, free from oil, laitance, grease, wax, dirt or any other form of foreign material adhering on it before waterproofing including removing of existing treatment/old felt / loose plaster / concrete etc. and repairing the joints or pointing with polymer mortar by adding bonding agent (SBR) with cement complete all as specified and directed & directed.

M&L for water proofing treatment on walls and floor of SWT by complete removal/taking down of existing treatment by applying acrylic based polymer modified cementitious elastomeric flexible composite coating system consisting of applying the following : (i) First coat applying with CICO TAPECRETE-P151 or equivalent mixed with neat fresh cement in the ratio of 1:1 by weight after dust free and moist the surface. (ii) Laying second layer of Fiber glass cloth of 45 GSM when the first layer is still green. Overlaps of joints of fiber cloth should not be less than 10 cm. (iii) Lastly applying final layer of cementitious elastomeric flexible composite coating system. The whole terrace so finished shall be flooded with water for a minimum period of 24 hours for curing and for final test. “All above operations to be done in order by the manufacturer's authorized applicator only. Make: Equivalent of CICO/SIKA/Chemsol/Bostik/Choksey

M&L of High Performance Water Based Aliphatic Acrylic-Based Protective, Decorative and anticarbonation coating on structure's column to prevent them from aggressive elements to protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, sulphates, oxygen and water. The product should also be suitable to protect other cementitious substrates and masonry. It should be equally suitable for new and existing structures. Make :CICO GUARD–WS an aliphatic acrylic, water based protective coating, providing an outstanding resistance to aggressive elements, UV- light and rain. The dry film thickness should be 150 microns in two coats with theoritical coverage of 4m2 /kg. Make: CICO or equivalent in CICO/SIKA/Chemsol/Bostik/Choksey.

S&F in repair aluminium composite panel not less than 3.0mm thick and including covered both side by encapsulated lens type retro reflective sheet (grade 3M type II diamond grade of make 3M/dark eye/SNI) green base, with and including all type and any size of writing letters and symbols of reflective type fixed complete all as specified and directed.

M/S Tanisha Traders (BID ID -3124905)

M/s Malinath Electricals (BID ID -3125333)

S.K. INFRASTRUCTURE (BID ID -3125469)

Rasam Engg Co. (BID ID -3124440)

M/S TANUSHREE CONSTRUCTION COMPANY (BID ID -3124877)

Lalit and Brothers (BID ID -3122666)

RAMDEV ENTERPRISES (BID ID -3125379)

M/s VIJAY KUMAR SUKHANI (BID ID -3122005)