Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.3 LAccepted-AOC | L1 | Accepted-AOC Lowest and reasonable bid | |
| 2 | L2₹13.9 L+₹10,742 (0.78%)Rejected-Finance 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | L2 | Rejected-Finance Other than lowest bid | |
| 3 | L3₹14.4 L+₹65,040 (4.73%)Rejected-Finance 239 PHASE 2 MODEL TOWN BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L3 | Rejected-Finance Other than lowest bid | |
| 4 | L4₹14.4 L+₹69,040 (5.02%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bid | |
| 5 | L5₹14.7 L+₹94,229 (6.85%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bid |
Tender Value
₹16 L
EMD Value
₹32,000
Closing Date
22 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (West) Jalandhar Cantt
Kabir Road Jalandhar Cantt.
CERTAIN REPAIR TO OTM AND MD ACCN OF A1 AREA OF AGE B/R-1 UNDER GE (WEST) JALANDHAR CANTT
2022_MES_546577_1
GE/JAL(W)-43/2022-23
Open Tender
Civil Works
Item Rate
270 days
Jalandhar Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer (West)
₹32,000
Yes
12 Oct 2022
20 Aug 2022
29 Sept 2022
20 Aug 2022
22 Sept 2022
10 Sept 2022
Amount
Dismantling of brick tiles single layer as in roof covering complete all as specified
Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) all as specified.
M&L applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces
S&F APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified
M & L for 10 mm thick rendering on concrete surfaces finished even and smooth without using extra cemet in cement mortar 1:3 as in roof/sunken floors and using WPC 3% by wt of cement. Note : WPC shall be measured and paid separately under respective item.
Supply only integral water proofing compound (ISI marked) complete all as specified and directed.
M & L brushing neat cement slurry with 3kg of cement per sqm complete all as specified
M & L PCC Padding with cement concrete type B-I (1:2:4) 20mm graded aggregate to bring top surface of slab in slop complete all as specified
M & L 40 mm th. Brick tiles laid on bedding layer of CM 1;6 15mm thick and joints grouted flush in cement mortar 1:3mixed with 5% of crude oil by weight of cement over APP membrane
M & L 40 mm th. Brick tiles laid on bedding layer of CM 1;6 15mm thick and joints grouted flush in cement mortar 1:3mixed with 5% of crude oil by weight of cement over APP membrane except brick all as specified and directed.
M & L flush pointing in CM 1:3 to brick tiles laid flat in roof or paving incuding raking out joints complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off premises complete all as specified and as directed by the Engineer-in-Charge.
M&L for non skid ceramic, coloured, tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles over and including screed bed of 15mm thick cement mortar (1:6) complete all as specified and as directed
M&L for non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in skriting set and jointed in neat cement slurry and pointed in white or colored cement to match over and incl 10mm thick rendering as backing coat of CM 1:6 complete all as specified.
S&F glazed ceramic white tiles 350mmx250mm/450x350 7mm thick as ion vertical surfaces viz dados, skirtings etcset and jointed in neat cement slurry and pointed in white cement mixed with pigment to match colour of tiles over and including rendering 10mm thick cement mortar (1:4) complete all as specified and as directed
M&L for vitrified ceramic, light shade tiles 10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 Sqm; as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles over and including screed bed of 15 thick cement mortar (1:6) complete all as specified and as directed.
M&L for vitrified ceramic, light shade tiles 10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 Sqm; as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles as in skriting over and including rendering 10 thick cement mortar (1:4) complete all as specified and as directed.
S & F for 4 mm thick of size 600x600mm HPSC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed GI powder coated grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size including taking down complete all as specified and as directed.
Taking down Chowkat or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed by EIC.
Taking down Chowkat or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed by EIC.
Taking down shutters of any description not exceeding 1.00 Sqm each complete all as specified and as directed.
Taking down Chowkat or frames exceeding 1 Sqm and not exceeding 2 Sqm each.
Material and labour for Granite (of any type) work 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, handwash places and like including necessary cutting and grooving to walls and making good including 10mm thick in cement mortar (1:3) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite complete all as specified and directed.
S&F steel window 1.25mm thick box type ERW hollow P section of size 60mmx25mm single rebated comprises gauged skeleton shutter ERW, sec 50mmx20mm and 1mm thick with two operable leaf consisting two Nos sash bars of T-section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion PCC (1:2:4) type B-1 (four Nos for each window) including following fittings welded to frame/shutter:- (a) Hold fast,150mm long of 12mmx3mm made to shape-04 Nos per window (b) Handle of Z section 20mmx25mm 100mm long 01 Nos per leaf (c) MS tower bolt 150mm long-2 Nos per leaf. (d) Z Section 20mmx25mm,100mm long stopper- 01 No per leaf (f) MS pintle hinges of size 75mmx12mm-2 Nos per leaf. (g) Fabrication and fixing arrangement as per Drg No.CEJZ/TD-06/07. Note:- Wire mesh shall be measured and paid separately under appropriate item.
All as per Item No. 24 here-in-before but glazed shutter. Note:- Glass shall be measured and paid separately under appropriate item
S&F steel ventilators with top hung shutter including hinges, and steel peg stay complete all as specified and directed.
S&F steel ventilators fixed type with glazing bar, complete all a specified and directed.
S&F anodised aluminium frame for doors,windows, partitions ,ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.
S&F anodised aluminium door shutters ,aluminium section weighing 0.55 kg/m including necessary joining cleats ,glazing clips, rubber neoprene packing, hanndles 2 Nos in each door, butt hinges, anodised aluminium snap beading screws etc complete all as specified.
S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
S&F floor door stopper aluminum alloy body anodized with hard drawn steel spring overall length 150mm complete all as specified and dierected.
S&F sheet glass 4.8 mm thick ordinary quality to be fixed in Al frame work in square exc 0.5 sqm in each pane
S&F solid PVC door frame of size 50x47 mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube complete all as specified
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165
M&L for preparation of new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F 35 mm thick plain, framed, panelled shutters factory made of second class hard wood (Hollock/ Bonsum/ Champlas) door shutters with two panels having lock rail and panels of 9mm BWP commercial ply, the size of rail and style as per IS 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified.
S&F 35mm thick glazed and skeleton shutters of 2nd class hard wood (Hollock / Bonsum / Champlas) open rebated and prepared to receive glass gauze etc without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I Sec 8 clause 8.23 (a).
S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples complete all as specified as directed.
M&L for preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F 200 mm long aluminium, anodized, barrel tower bolts of extruded section and ISI marked complete all as specified.
S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section and ISI marked complete all as specified.
S&F 300 mm long aluminium alloy, anodized sliding door with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified.
S&F aluminum cast type anodized handles 150mm long. complete all as specified.
S&F 100 mm size butt hinges galvanized mild steel, medium weight, cold rolled complete all as specified.
S&F 250 mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed
S&F 150m mild steel semi barrel tower bolt, riveted or spot welded type with back plates, with bright bolt and open staple, and fixed
S&F125mm mild steel pressed handles, oval type, stove enamelled black
Hacking out old broken glass (any thickness, size, quality or description) from metal/wooden surfaces including punching or drilling out old glazing pins/spring clips exceeding 1.5 Sq.m and providing and fixing new pins/clips complete all as specified.
S&F sheet glass 3mm thick ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 Sq.m in each pane complete all as specified and as directed.
S&F brass chromium plated health foucet for pedestal pattern water closet including PVC flexible pipe along with complete necessary fittings complete all as specified and as directed.
S&F in replacement aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 Kg complete all as specified as directed.
S&F in replacement 15 mm bore chromium plated bib tap fancy type cast copper alloy with crutch or butterfly handle screwed down screwed complete all as specified.
S&F in repair 15 mm bore stop valve (or angle valve) fancy type chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends complete all as specified and directed.
S&F pillar taps, cast copper alloy with capstan heads chrominm plated fancy type, screwed down high pressure with or without lettered Hot or Cold with long screwed shank and fly nuts, srewed for iron pipe and fixed 15mm bore.
S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including plastic seat cover closed pattern including bolts, flush pipe of polyethylene of low or high density PVC 32mm dia anti-syphonage pipe etc and connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and as directed.
S&F in repairs vitreous china ware squatting pan ‘Orissa’ pattern size 580x440mm white with integral foot rest including connection to trap and flushing pipe, anti-syphonage pipe etc and making good to floor etc complete all as specified and as directed.
S&F in repair vitreous china wash hand basin, white, flat back size 550mmx400mm including cast iron or mild steel brackets including cutting for and pinning in brackets complete all as specified and as directed.
S&F in repair 10 litres capacity PVC valve less symphonic action type, flushing cistern, low level, white with inlet, ball valve, PVC flush pipe, float and handle including brackets complete all as specified.
Taking down cement or cement plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc all as specified
M&L 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement all as specified
M&L 15mm thick cement plaster in cement mortar 1:4 on brick or concrete surface finished even and smooth without using extra cement all as specified
M&L 5 mm thick cement plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement all as specified
M&L for three coats of colour wash on newly plastered surfaces of wall including preparation of wall surfaces complete all as specified and directed by Engr -in-charge.
M&L for preparing new surfaces plastered or unplastered surfaces of walls by applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engr -in-charge.
M&L for preparing new plastered or unplastered wall surfaces and applied two coat of cement base paint over one priming coat complete all as specified and directed by Engr -in-charge.
M&L for complete removal of existing treatment on walls and applying 1mm thick wall care putty and applying two coats of oil bound distemper complete all as specified and as directed by EIC
M&L for complete removal of existing treatments by washing, rubbing down and stopping etc on wall surfaces and applied two coat of cement base paint complete all as specified and directed by Engr -in-charge.
NATIONAL BUILDERS
SARASWATI CONSTRUCTION CO
JAGDISH KUMAR SEHGAL
G S TRADERS
HYLAND CONSTRUCTION COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .