WELCOME MAINTENANCE IN OFFICER MD ACCN FAFA QTR AND INTERNAL ELECTRIFICATION AND OTHER EM RELATED MAINT SERVICES AT C1 C1A AND ZONE B AREA UNDER GE EAST MATHURA

Amount

M&L for preparation of old decorative surfaces of walls and applying one coats of oil bound distemper complete all as specified and as directed.

M&L for preparation of old plastered surface of wall and applying one coat of white wash on wall surface complete all as specified and as directed.

M&L for preparation of old plastered surface of ceilling and applying one coats of white wash on ceiling surface complete all as specified and as directed.

M&L for Providing 1 mm thick wall care putty on surfaces of wall all as specified and directed by engineer in charge.

M&L for preparation of old surface of walls and applying two coats of oil bound distemper white or tinted complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel surface of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises compete all as specified and as directed.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base, floor etc. complete all as specified and as directed.

M&L for 25mm thick cement concrete type B0, 1:2:4 (using 12.5mm graded stone aggregate) as in floors, levelling course etc. complete all as specified and as directed.

M&L for Non Skid ceramic joint free coloured tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles of size 450 x 300 x 7mm thick as in vertical surfaces, such as dado, skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick rendering in cement motar 1:3 complete all as specified and as directed.

M&L for Vitrified Ceramic light shade tiles 10 mm thick (square/ rectagular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed.

M&L for Vitrified Ceramic light shade tiles 10mm thick (square/ rectagular) polished, area of each tiles not exceeding 0.36 sqm, as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick rendering in cement motar 1:3 complete all as specified and as directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for as in sunken floor etc. complete all as specified and as directed.

M&L for providing, cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) in coping, roof kerb, roof padding, padding in sunken slab mixed with liquid water proofing compound complete all as specified and as directed. Note : Liquid WPC shall be measured and paid separately under appropriate item at this BOQ.

M&L for providing cement concrete 1:7:12 type F2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, sunken floor etc complete all as specified and as directed.

Dismantling of brick tiles any size in floors, channels, kerbs, aprons, etc laid bedded and pointed in any mortor complete all as specified and as directed.

Dismantling of existing roof treatment consisting of screed, tar felts/tiles etc, and removal of dismantled materials complete all as specified and as directed.

M&L for preparation of old concrete surface and brushing neat cement slurry @ 3 kg of cement per sq. metre complete all as specified and as directed.

M&L rendering 10mm thick on fair face of brick work/concrete surface in cement mortar 1:3 by mixing liquid water proofing compound as per manufacturers instructions and finished surface even and fair complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only of integral water proofing compound confirming to IS-2465-1075 complete all as specified and as directed.

M&L for bitumen felt water proofing treatment using APP based polymeric membrane minimum weighting 3.00kg/sqm and minimum thickness 3mm reinforced with polyster non wove fabric (but not less than 150gms/sqm) laid over bitumen primer applied @ 0.30 Kg/sqm by torch application complete all as specified and as directed.

M&L for providing cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, coping, benching rounded or chamfered on edges complete all as specified and as directed.

M&L for cement concrete tiles 20cm x 20cm x 20mm thick, with grey cement and pigments, machine pressed, set jointed and pointed in neat cement slurry in floor laid over and including 15 mm thick screed bed in cement mortar 1:6 and filling the joints with Tile Max premium cementitious grout material of JK Cement or its equivalent complete all as specified and as directed.

Taking down Cement plaster from brick walls or concrete surface etc incl raking out joints, hacking for key and scrubbing down with water etc all as specified and as directed.

M&L rendering 15mm thick on other than fair face of brick work/concrete surface in CM 1:4 by mixing liquid water proofing compound as per manufacturers instructions and finished surface even and fair complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only liquid water proofing compound as approved complete all as specified and as directed.

M&L for 10mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:6 finish the surface even and fair without using extra cemnet complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of bricks or concrete surfaces as in ceiling surfaces in cement mortar 1:3 finish the surfaces even & fair complete all as specified and as directed.

M&L for preparation of new plastered surface of ceilling and applying three coats of white wash on ceiling surface complete all as specified and as directed.

M&L preperation of newly plastered surfaces of walls and applying two coats of oil bound distember over a coat of alkali resistant primer using spray machine, spray hard to receive area to achieve excellent application using limited manpower over and including a coat of 1mm thick wall care putty complete all as specified and as directed.

M&L for repairing the edge/corner of Chajja/roof projection and similar work by removing plaster width/girth not exceeding 150 mm and making good with 10 mm thick rendering in cement mortar 1:3 to match with existing surface complete all as specified and as directed.

M&L for preparation of new plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

S&F in repair 25 mm dia stainless steel alloy tubular drapery rod cut to size and fixed in position including fixing brackets, stops end caps etc. complete all as specified and as directed.

M&L Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete as specified and as directed.

S&F in repair 3 mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beading in square n exc. 0.50 square metre in each pane including hacking out old broken glass from steel/wooden frames complete as specified and as directed.

S&F 4mm thick frosted glass, ordinary quality and glazing with oil putty or wooden beading in square n exc. 0.5 square metre in each pane including hacking out old broken glass from steel/wooden frames complete as specified and as directed.

S&F in repairs vitreous china wash basin white, flat back of size 580 x 450mm, excluding taps, waste chain & plug & porcelein stopper but including brackets including 32mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement cutting for and pinning in ends of brackets complete all as specified and as directed.

S&F in repairs wash down water closet (pedestal pattern) complete (excluding flushing cistern and flush pipe) including Plastic water closet seat cover white, closed pattern with flat bottom and cover with mild steel hinge chromium plated including connection to drain (or outgoing pipe) and flushing pipe, antisyphonage pipe etc., complete and all as specified and directed.

S&F in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete as specified and as directed.

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, brackets for bottom support etc complete all as specified and as directed.

Taking up or down steel tubing and connections 15mm bore complete all as specified and as directed.

Taking up or down steel tubing and connections 20mm bore complete all as specified and as directed.

Taking up or down steel tubing and connection 25mm bore complete all as specified and as directed.

S&F mild steel galvanised tube 15mm dia bore medium grade with all fittings fixed to walls, ceiling or laid in floor complete all as specified and as directed.

S&F mild steel galvanised tube 20mm dia bore medium grade with all fittings fixed to walls, ceiling or laid in floor complete all as specified and as directed.

S&F mild steel galvanised tube 25mm dia bore medium grade with all fittings fixed to walls, ceiling or laid in floor complete all as specified and as directed.

S&F in repair 15-20mmGI reducer complete all as specified and as directed.

S&F in repair 25 mm bore GI Tee complete all as specified and as directed.

S&F in repair 25 mm bore GI Union complete all as specified and as directed.

S&F in repair 25 mm bore GI Elbow complete all as specified and as directed.

S&F in repair 25 mm bore GI socket complete all as specified and as directed.

S&F in repair 25 mm bore 125 mm long Nipple complete all as specified and as directed.

S&F in repair 25 mmbore 100 mm long Nipple complete all as specified and as directed.

S&F in repair 20 mm bore GI Union complete all as specified and as directed.

S&F in repair 20 mm bore GI Elbow complete all as specified and as directed.

S&F in repair 20 mm bore GI Nipple 6 inch long complete all as specified and as directed.

S&F in repair 20 mm bore GI Nipple 4 inch long complete all as specified and as directed.

S&F in repair 20 mm bore GI socket complete all as specified and as directed.

S&F in repair 15 mm bore GI Tee complete all as specified and as directed.

S&F in repair 15 mm bore GI Union complete all as specified and as directed.

S&F in repair 15 mm bore GI Elbow complete all as specified and as directed.

S&F in repair 15 mm bore GI socket complete all as specified and as directed.

S&F in repair 15 mm bore 125 mm long Nipple complete all as specified and as directed.

S&F in repair 15 mmbore 100 mm long Nipple complete all as specified and as directed.

S&F in repairs 100mm long GI nipple fully threaded with two numbers check nuts and washers for PVC tank with back nut and washers for inlet and outlet pipe of following sizes complete all specified and as directed:-

15mm bore

20mm bore

S&F in repair white colour european type combination pattern WC casket type Christinna with mounted flushing cistern, PVC connection, seat cover and jointed to sewage pipe complete all as specified and as directed.

S&F in repair Vitreous China Urinal, Size 375x320x620mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

S&F in repair15 mm bore Hand health faucet with all connected fittings complete all as specified and approved by Engr-in-charge.

S&F in repair sink mixer 15 mm bore with regular swinging spout (wall mounted model )with connecting legs and wall flanges complete all as specified and as directed.

S&F in repair Bib cock 15 mm bore with wall flange complete all as specified and as directed.

S&F in repair Angular stop cock 15 mm bore with wall flange complete all as specified and as directed. Make : Jaquar/KOHLER/GROHE

S&F in repair 15mm bore bib tap with long body standard of CP any colour screwed for iron pipe & fixed (min weight 120 gms) complete all as specified and as directed.

S&F in repairs wall mixer 15 mm bore with connector and including hand shower arrangement with connecting legs, wall flanges and wall bracket for hand shower complete all as specified and as directed.

S&F in repairs basin mixer 15 mm bore with 450mm braided connection pipe complete all as specified and as directed.

S&f in repair 2 way bib cock of superior quality with wall flange 15 mm bore including fixing to pipe complete all as specified and as directed. Make : JAQUAR /KOHLER/GROHE.

S&F in repair concealed stop cock reduced body with adjustable Wall Flange for pipe of 15mm bore complete all as specified and as directed. Make : JAQUAR /KOHLER/GROHE.

S&F in repair Plastic one piece soft close seat cover with flat bottom and cover and mild steel chromium plated or aluminised hinging device completer all as specified and as directed.

S&F in repair Siphone any size compatible for one piece EWC all as directed.

S&F in repair 200mm dia OVERHEAD shower with Arm round shape single flow (body and face plate stainless steel with chrome finish) with rubit cleaning system complete all as specified and as directed.

S&F in repair corner glass shelf with bracket fixed to wall complete all as specified and as directed.

S&F in repair stainless steel towel rack 600 mm long with lower Hangers complete all as specified and as directed. Make : JAQUAR /KOHLER/GROHE.

S&F in repair repair stainless steel towel rail 600 mm long complete all as specified and directed. Make :- JAQUAR /KOHLER/GROHE.

S&F in repairs aluminum extruded section body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as sepcified and as directed.

S&F waste coupling of Brass chromium plated for 32mm bore discharge pipe (half or full threaded) complete as specified and as directed.

S&F bottle trap for 32mm bore discharge pipe (half or full threated) of PTMT having min water seal of 25mm (min. weight 32mm-260gms) complete all as specified and as directed.

S&F Grating doom 100 mm dia of chromium plated (CP) complete all as specified and as directed.

S&F towel ring of brass chromium plated fixed with and including CP brass screws & wooden/plastic cleats complete all as specified and as directed. Make: Jaquar/ Kohler/Grohe).

S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F Tolilet paper holder, vitreous China box type fixed to walls with chromium plated brass screws complete all as specified and as directed. Make: Jaquar/ Kohler/Grohe).

S&F in repairs 5.5mm thick sheet glass shelf assembly consisting 12cm wide with chromium plated bracket guard & railing 60cm long complete all as specified and as directed.

S&F in repair PTMT ball brass valves high pressure, with polythene float & flynut complete, screwed for 20mm bore dia iron pipe or brass ferrule complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

M&L for Asbestos cement one piece plain angular ridge 6mm thick fixed with coach screws complete all as specified and as directed.

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets fixed with L-type or J-type screws or cranked hook bolts in roofs, walls, etc. complete all as specified and as directed.

S&F in repairs floor door stopper of brass body, and tongue with hard drawn steel spring overall length of cover plate 150mm complete all as specified and as directed.

S&F in repairs PVC waste pipe 32 mm dia 600 mm long complete all as specified and as directed.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 0.70 Kg/Sqm of mix per coat and applying second coat after 4-6 hrs complete all as specified and as directed Note : Make of the chemical 'Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit, STP, CICA etc. as approved.

Taking down existing copper/aluminium point wiring (Light/Fan /Socket or Power Point/bell etc) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets), removing materials from site and making good the disturbed surfaces of walls, floors etc as per existing specification ccomplete all as specified and as directed. Note : Credit for above items should be made as per credit schedule separately.

Taking down carefully Submain wiring of any type size complete and making good disturbed sufaces to match with the existing surfaces complete all as specified and as directed.

Taking down old unserviceable existing SPN/TPN DBs / enclousers any size and type / any descriptions as iron sheet scrap excluding MCB any type / size and making good disturbed surface / wall as per existing complete all as specified and as directed.

M & L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia medium grade) and its all accessories complete concealed in wall incl cutting & chases(making good all to the disturbed surfaces as per existing) and provision of modular flush metal boxes including cover plate with frame for mounting modular switches, sockets, regulators etc including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified and as described for the following:- Make : Havells/Polycab/Finolex/RR Kable/Plaza

One light/ fan point controlled by one way switch 5 amp complete all as specified and as directed.

One 3 pin 5 Amps socket point controlled by one way switch on same board with other switches complete all as specified and as directed.

One 3 pin 5 Amps socket point controlled by one way switch on independent board complete all as specified and as directed.

One bell point controlled by one push button on independent board complete all as specified and as directed.

One light point controlled by two 2-way switches.

All as per item Serial No. 105 but for 3 pin / 5 pin 16 Amps sockets outlet with 2.5 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed .

All as per item Serial No. 105 here-in-above but for 25 Amps of AC enclosure independent, with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed .

Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/ Crabtree

Supply and Fixing Modular bell Push switch 6 Amps with indicator single pole one-way, 1 Module complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/ Crabtree

Supply and Fixing Modular switch 16 Amp single pole one way,1 Module complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/ Crabtree

Supply & Fixing Modular fan Regulator electronic step type complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/ Crabtree

Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps, combined 2 Module complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/ Crabtree

Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/ Crabtree

Supply and Fixing Modular switch 6 Amps single pole two-way, 1 Module complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/ Crabtree

Supply and Fixing switch piano type , SP, one way, flush type 5 Amps complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/ Crabtree

Supply and Fixing socket out let 2 in 1 flush type 5 pin 5 Amp complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/ Crabtree

Supply and Fixing socket out let 2 in 1 flush type 3 pin 5 & 15 Amp complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/ Crabtree

Supply and Fixing switch piano flush type 15 Amp, SP, 240 volt, one way complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/ Crabtree

Supply and Fixing bell push siwtch piano flush type, SP, one way, 5 Amps complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/ Crabtree

Supply and Fixing ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/ Crabtree

Supply and fixing lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/ Crabtree

Supply and fixing Bell Multi Music type, 230 Volts including connection complete all as specified and as directed. Make : Havells/Orient/Bajaj/CG/Philips

Supply and fixing Bell Ding dong type, 230 Volts including connection complete all as specified and as directed. Make : Havells/Orient/Bajaj/CG/Philips

Supply and fixing stepped type electronic fan ragulator flush type on the exiting phenolic laminated sheet complete all as specified and as directed. Make : Havells/Orient/Bajaj/CG/Philips

Supply & fixing for Sub Main Wiring wiring with two runs single core 4 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 4 Sqmm copper green colour earth wire complete all as specified and as directed. Make : Havells/RR Kable/Polycab/Glaster Note : Two runs of 4 Sq mm (P&N), one run of 4 Sq mm earth wire & One run of PVC casing and caping will be measured as one RM.

Supply & fixing for Sub Main Wiring with two runs single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 25mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 6 Sqmm copper green colour earth wire complete all as specified and as directed. Make : Havells/RR Kable/Polycab/Glaster Note : Two runs 6 Sq mm (P&N), one run of 6 Sq mm earth wire & One run of PVC conduit will measured as one RM.

Supply & fixing for Sub Main Wiring with two runs single core 10 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 25mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases (making good all to the disturbed surfaces as per existing) with and including 10 Sqmm copper green colour earth wire complete all as specified and as directed. Note: Two runs 10 Sq mm (P&N), one run of 10 Sq mm earth wire & One run of PVC conduit will measured as one RM.

Supply & fixing indoor decorative ultra slim surface /Wall mounted LED batten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and and directed. Make : Havells/CG/Philips/Wipro/Syska

Supply & fixing indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1X9 watt LED Tube fitting (size within 600x25x40 mm) suitable for mirror light with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K,>100Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

S&F in replacement LED Bulk Head with PDC aluminium housing and milky diffuser capacity 10 Watt complete with all accessories and connection complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

Supply and fix LED 9W, suitable for E27 type holder, warm white/ cool white/natural white complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

Supply and fix LED 7W, suitable for E27 type holder, warm white/ cool white/natural white complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

Supply and install of 30W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- related colour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF ≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280V including all connections complete all as specified and as directed. Make : Make : Havells/CG/Philips/Wipro/Syska/Bajaj

Supply & fix in repair recess type, 36/34 watt LED panel light (600x600 mm) complete with fittings integrated electronic driver,energy efficient, 230 volts,co- related colour temperature (CCT) of 6500K, natural white complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make : Make : Havells/CG/Philips/Wipro/Syska/Bajaj

Supply & fixing indoor wall mounted fitting, brushed nickel finish fixture with opal glass diffuser, with LED retrofit bulb of capacity 09 watts complete all as specified and as directed. Make : Havells Cat Part No. FLORETINE WL 1LS B22 SS or equivalent make in Crompton/ Philips C&S.

S&F LED post top light fitting 30W IP-65 rated completeall as specified and as directed. Make : Havells/Syska/Bajaj/Philips/CG

S&F LED Round/square recess mounted slim downlighter 12 watt, 6500K, integrated electronic driver, natural white complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

S&F LED Round/square recess mounted slim downlighter 18 watt, 6500K, integrated electronic driver, natural white complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

M&L for building security light bracket made out of 40mm dia light grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole/wall including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including two coats of aluminium paint over a coating of red oxide primer including taking down old unserviceable bracket as scrap any size/description complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

S&F MCB distribution board, SPN 12 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

S&F MCB distribution board, SPN 8 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj.

S&F MCB distribution board, SPN 4 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

Supply & fix MCB SPN 63 Amps,' C' series , bracking cap10KA, 240V including taking down existing unsv MCB complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

Supply & fix in replacement of MCB SPN 40 Amps,' C' series, breacking cap 10KA, 240V including taking down existing unsv MCB complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

Supply & fix in replacement of MCB SPN 6-32 Amps,' C' series, breacking capacity 10KA, 240V including taking down existing unsv MCB complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

Supply & fixing in replacement of MCB SP 6 - 32 Amps, ' C' series ,bracking cap 10KA, 240V including taking down existing unsv MCB complete all as specified and as directed. Make : Havells/Legrand/L&T/Siemens/Schnieder

Supply and fix SP enclosure with a two pin and earth plug and socket complete with SP MCB of rating 20 Amps, 240 Volts with all connection complete all as specified and as directed. Make : Havells/Legrand /L&T/Siemens/Schnieder

Taking down the ceiling fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearings, reassembling the fan and blades, painting of fans with synthetic enamel paint by spraying including filling cavities with filler, writing MES No. in paint, hanging/fixing the fan in its original position and testing on completion complete all as specified and as directed. Note: The spare parts (like as bearing, capacitor, rubber wheel bush, fan winding etc) required shall be measured and paid separately under relevant items as supply only.

All as per item Serial No. 148 here-in-before but exhaust fans of any sweep.

Supply only ball bearing/bush etc as per existing & suitable for ceiling fan/exhaust fan complete all as specified and as directed.

Supply only rubber wheel bush with GI bolt, nut and split pin complete all as specified and as directed.

Supply only down rod 600/900 mm duly powder coated white with GI bolt, nut, rubber wheel bush and split pin, clamp etc including all accessories for fixing existing fan complete all as specified and directed.

supply only capacitor 2.5 to 3.5 MFD suitable for ceiling fan/exhaust fan complete all as specified and as directed.

S&F Plastic Surface mounting box 1/2 module gang box for mounting switches, sockets, fan regulator etc complete all as specified and as directed.

S&F Plastic Surface mounting box 3/4 module gang box for mounting switches, sockets, fan regulator etc complete all as specified and as directed.

S&F Plastic Surface mounting box 6/8 module gang box for mounting switches, sockets, fan regulator etc complete all as specified and as directed.

Supply & replacement of 3 mm thick laminated mica sheet top cover suitable for switch board 3 way to 6 way including removing & re-fixing of existing switch/socket and complete connection all as directed. Make : Hylam/Sunmica/Anchor/Greenlam. Note :- Replacement of unserviceable switch / socket / regulator shall be measured & Paid separately under relevent item of Sch -A

Supply & replacement of 3 mm thick laminated mica sheet top cover suitable for switch board 8 way to 12 way including removing & re-fixing of existing switch/ socket and connection complete all as specified and as directed. Make :Hylam/Sunmica/Green lam/Anchor Note :- Replacement of unserviceable switch/socket/ regulator shall be measured & Paid separately under relevent item of Sch -A

S&F PVC insulated FRLS , unsheathed cable multi stranded copper conductor of size 4.0 Sqmm including with use of PVC pipe/Casing - Caping as per site requirement during wiring complete all as directed.

M&L for Modular metal flush box 1/2 Module incl cutting & chases (making good all to the disturbed surfaces as per existing) complete all as specified and as directed. Make:Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/Crabtree

M&L for Modular metal flush box 3 Module incl cutting & chases (making good all to the disturbed surfaces as per existing) complete all as specified and as directed. Make:Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/Crabtree

M&L for Modular metal flush box 4 Module incl cutting & chases (making good all to the disturbed surfaces as per existing) complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/ Crabtree

M&L for Modular metal flush box 6 Module incl cutting & chases (making good all to the disturbed surfaces as per existing) complete all as specified and as directed. Make:Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/Crabtree

M&L for Modular metal flush box 8 Module incl cutting & chases (making good all to the disturbed surfaces as per existing) complete all as specified and as directed. Make:Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/Crabtree

M&L for modular white cover plate with frame, 1/2 module complete all as specified and as directed. Make:Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/Crabtree

M&L for modular white cover plate with frame, 3 module complete all as specified and as directed. Make:Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/Crabtree

M&L for modular white cover plate with frame, 4 module complete all as specified and as directed. Make:Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/Crabtree

M&L for modular white cover plate with frame, 6 module complete all as specified and as directed. Make:Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/Crabtree

M&L for modular white cover plate with frame, 8 module complete all as specified and as directed. Make:Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/Crabtree

M&L for point wiring with 1.5 Sqmm (nominal area) FRLS PVC insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including PVC casing and caping and its all accessories of suitable size on wall/roof surfaces ( making good all to the disturbed surfaces as per existing) including one run of 1.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing including gang box / 2.0mm thick MS terminal box as per site requirement for fixing switches, sockets, fan regulators etc fixed to wall with 3mm thick laminated sheet top cover complete all as specified and as directed for:- Make of cable : Havells/Polycab/RR Kable/Plaza/ Finolex/Gloster

One light point/ fan point / bell point controlled by one switch.

One 3 pin 5 Amps socket point controlled by one way switch on same board.

One 3 pin 5 Amps socket point controlled by one switch on independent board.

All as per item No. 170 here-in-before but with 4 Sqmm for 3/5 pin 15 Amps socket point controlled by one switch on independent board and 4.0 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and as directed.

Taking down carefully service connection of any type complete all as specified and as directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for laying of cables and getting out complete all as specified and as directed.

Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

Returning, filling in including spreading, levelling,watering and well ramming excavated soil in layers not exceeding 25 cm thick each , filling back in trenches after cables have been laid and tested complete all as specified and as directed.

Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor laid in trenches/duct/fixing on walls/poles or passing through HDPE double wall corrugated pipe (outer dia should not be less then 40 mm) including connecting with suitable lugs, glands, nuts and bolts in existing Panel from pole/Main Panel Box and testing complete all as specified and as directed of following sizes :- Make : Havells/Polycab/ICC/Gloster/RR Kable. Note: HDPE pipe rate shall deemed be included in quoted unit rate of above item(s).

10 sqmm 2 core

16 sqmm 2 core

16 sqmm 4 core

S&F TP&N Vertical Loadline distribution board, 4 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail ,blanking Plates, cable ties for cable management, 440 V, 4 way complete all as specified including fitting suitable for MCBs with connections complete all as specified and as directed. Make : Havells/L&T/Legrand/Simens/Schenider. Note : -MCB & MCB /MCCB DBs shall be of same make and measured and paid seperately under respective items of Sch A. DB shall be fixed in flush pattern by cutting the wall and making good disturbed surface as pe directed & rate shall be included in the items.

Supply & fix in replacement of MCCB 125 Amps,' C' series, breacking capacity16 KA, 4 Pole, 415V complete all as specified and as directed. Make : Havells/L&T/Legrand/Simens/Schenider.

Supply & fix in replacement of MCCB 100 Amps,' C' series, breacking capacity 16KA, 4 Pole, 415V complete all as specified and as directed. Make : Havells/L&T/Legrand/Simens/Schenider.

Earthing complete all shown as electrical plate No -03 of MES Sch part -I as specified and as directed including the following:- (i) GI earth plate of size 60x 60cm x6.0mm thick burried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.50 metres below ground level. (ii) Earth plate surrounded by and packed with charcoal and common salt in alternative layers. ( n.exc 15 cms each layer) (iii) 4 mm GI wire from earth plate to MCB DB/machinery including necessary GI bolts, nuts check , washers, thimbles etc. (iv) 20 mm bore, light grade, Gi pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontaly to the earth pit. (v) 15 mm dia bore G. I. medium grade pipe for protection of earth wire. (vi) Cement concrete chamber of PCC (1:3:6) type C-2 using 40mm graded stone aggregate. The chamber shall be constructed one metre away from edge of earth pit. (vii) 50 mm thick precast cover of reinforced cement concrete(1:2:4) type B-1 using 20mm graded stone aggregate with steel rainforcement 8 mm dia mild steel TMT bar @ 10 Cm c/c both ways and MS angle iron 50x50x6mm frame including two coats of painting over a coat of red oxide to exposed steel surfaces with suitable handle to lift the cover. (viii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance of 50 m as directed.

Taking down existing UNSV light fittings such as tube lights, down lights, bulk head, security lights, wall lights of any type/make from wall/ceiling etc complete all as specified and as directed.

Taking down existing UNSV MCBs any type/size as per existing complete all as specified and as directed.

M/S A.K. ENGINEERS

Ms Kamal Kant Agarwal

M/S United Builders

B R ENTERPRISES

B S ENTERPRISES

M/s M S CONSTRUCTION

ASHUTOSH BUILDERS

M/s Hoti Lal Contractor