REPAIRS TO MASONARY JOINERY TILING, PANELING FALSE CEILING PLUMBING SANITARY AND OTHER WORKS IN GUARD POST AND TECH AREA OF AF STN UNDER GE (AF) LEH

Amount

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

M&L for Vitrified Ceramic coloured tiles light shade 8 to 10mm thick (square/ rectangular) pre polished, area of each tiles n.exc 0.36sqm in floors etc over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300x200x7mm thick (Square/rectangular) in vertical surfaces over and including 10 mm thick rendering in CM 1:4 and set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles complete all as specified.

M&L for ceramic coloured tiles 7 to 8mm thick (Square/Rectangular) area of each tiles n.exc. 0.16 Sqm in floors etc. over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles complete all as specified.

Taking down chowkats or frames (without taking off shutters) having size exc 1.5 Sqm and n. exc. 4.0 sqm each and removing from site complete all as specified and directed by Engr-in-charge.

Taking down chowkats or frames n. exc 1.5 Sqm each with shutters (without taking off shutters from the frames) all as specified

Taking down shutters of any description exc 1 Sqm and n. exc. 2 sqm each complete all as specified and directed by Engr-in-charge.

Taking down shutters of any description n. exc. 1 sqm each complete all as specified and directed by Engr-in-charge.

S&F PVC door frame of size 50X47mm made out of 5mm in plain ivory/cream colour PVC sheet reinforced with MS square tube and complete fixing in opening as per manufacture's instruction complete all as specified and directed by Engr-in-charge.

S&F factory made solid panels PVC door shutter 30mm thick ( style ) consisting of frame made out of MS tube for top and bottom rails, MS frame shall be covered with heat moulded plain cover PVC 'C' channels having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawings. Make: Rajshree/Sintex or equivalent as approved by GE.

S&F of 2nd class soft wood for plain, solid, straight chowkets and frames, wrought, framed rebated on the solids, rounded or chamfered, put together with glue painned at joints, complete all as specified.

S&F Plain, framed, panelled shutters of 2nd class soft wood (Kail) 35mm thick, (any number of panels), with panels of timber flat on both sides (feathers edged),or of veneers particle board medium density, wood particle board with commercial face veneers, as specified and fitted to chowkats complete all as specified & directed by Engr-in-charge.

S&F glazed and skeleton doors shutters of 2nd class soft wood (Kail) 35mm thick, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24 (a), and fitted to chowkhats complete all as specified.

M&L for preparation of new or previously untreated wood or wood based surfaces of any description, not otherwise described, over 10cm width or in girth and applying two coats of synthetic enamel paint (tint as approved) over a coat of pink primer complete all as specified and directed by Engr-in-charge.

S&F aluminium anodized barrel tower bolt 150mm long of extended section and complete all as specified and directed by Engr-in-charge..

S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as spd.

S&F butt hinges 100mm long, medium weight cold rolled mild steel, complete all as specified & directed by Engr-in-charge.

S&F 150mm long aluminium anodised, cast type handles complete all as specified & directed by Engr-in-charge.

S&F galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm dia fixed with tinned tacks of galvanised wire staples or wooden beads as directed.

S&F in repairs Aluminium (die cast body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified & directed by Engr-in-charge.

Dismantling boarding any description, fixed in position complete all as specified & directed by the Engr-in-Charge.

Dismantling of timber scantling under 40 sq. cm in section in framed work complete all as spd.

M&L for 2nd class soft wood (Kail), plain, fillets, square, rectangular or triangular in section, clean sawn, secured with nails area exc 13 Sqcm but not exc 25 Sqcm complete all as specified and directed by Engineer-in-Charge

All as per item No. 23.0 above but bull-nosed,splayed,chamfered rounded on one edge or face and n exc 3 sqcm. Complete all as specified & directed by the Engr-in-Charge.

M&L for 9mm thick pre-laminated particle board, interior grade, pre-laminated one side with decorative choice lamination another side balancing white lamination fixed with screws to timber frame completed all as specified and directed.

M&L for readymade soft wood wall panelling in strips of 100mm width 10mm thickness having tongue and groove fixing arrangement fixed to wooden frame work as per manufacturer instruction complete all as specified and directed.

M&L for Preparation of new wooden surfaces of any description nexc 10 cm width or girth and applying two coats of varnishing with finishing coat with synthetic varnishing complete all as specified and directed.

M&L for Preparing the newly wooden surface over 10 cm width or girth and finishing the surface with filler coat of wood filler liquid transparent and under coat and finishing coat with synthetic varnish complete all as specified

Dismantling of existing false ceiling frame work with ceiling board of any description and in any position and supply & fixing in position suspended false ceiling system using E Grid suspended ceiling Grid system of M/S Everest industries Ltd or India Gypsum. The size of Grid shall be 595X595X8mm (one side aluminium foiling) with powder coated GI frame work, main runner 39X24mm, cross tee 29X24mm and wall angle 22.2X22.2mm using 8mm thick High Pressure Stream cured non primered classic/designer variant E-Board ISI Marked IS No 14862-2000. Fibre cement E Board to be placed in the gird of E Grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers (level clip with wire)1.20m centre to centre from the soffit of the roof with butter fly clips using soffit cleat (web:25mm,Flange:37mm & Thickness:1.8mm) and metal rawl plug(12.7mm diameter) complete all as specified and directed by Engr-in-charge.

Demolition of PCC Block masonry, pre cast concrete articles and pre cast concrete block walling built in cement mortar all as specified and directed by Engr in charge.

M&L for pre cast cement concrete 1:3:6 type C-1 (using 20 mm graded agg) block masonry with solid block exc 10 cm width and setting in CM 1:6 complete all as specified and directed.

Taking down cement plaster or lime mortar, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of block masonry or concrete surfaces of wall in CM (1:4), finished even and smooth without using extra cement complete all as specified and directed by Engineer-in Charge.

M&L for 15mm thick rendering on other than fair faces block masonry or concrete surfaces of wall in CM (1:6), finished even and smooth without using extra cement complete all as specified.

M&L for preparation of newly plastered surfaces of walls, and applying two coats of oil bound distemper over cement based wall putty filling complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered or un-plastered surfaces of walls, and applying two coats of cement based paint over a coat of white wash complete all as specified.

Dismantling of plain or corrugated steel sheeting any gauge any thickness incl Nainital or similar pattern coverings complete all as specified

S&F Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Dismantling of structural steel/frame work of any description in any position including doors, gates, roof iron works etc, complete all as specified and directed by Engr-in-Charge.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (GdeE- 250) qualityA complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new untreated steel surfaces of any description over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide. complete all as specified and directed by Engr-in-Charge.

S&F for 2mm thick prefex sheet, glazing fixed with aluminium beading, ISI marked including hacking out old sheets complete all as specified and directed by Engr-in-Charge.

M&L for Hacking out old broken glass (any thickness, size, quality or description) from metal/wooden frame including punching or drilling out old glazing pins/spring clip complete all as specified and directed by Engr-in-Charge.

S&F Sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified.

Taking down 15mm dia bore galvanized steel water tubing and connections including cleaning for refixing or removal to MES store yard complete all as specified & directed by the Engr-in-Charge.

S&F 15mm dia bore galvanized steel water tubing, “medium grade,” with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified & directed.

S&F in repair Wash hand basin vitreous china white flat back size 550mm x 400mm excluding taps but including bracket, PVC connection including cutting of and pinning in ends of bracket including CP waste pipe and coupling complete all as specified & directed by Engr-in-Charge.

S&F in repairs vitreous china Wash down water closet pan ( Anglo Indian type) incl Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified & directed by Engr-in-Charge.

S&F in repairs vitreous china squatting pattern Orissa pattern Water closet, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified & directed by Engr-in-Charge.

S&F in repairs for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified & directed by Engr-in-Charge.

S&F in repair 10 ltr capacity PVC valve less, syphonic action type flushing cistern. Low level white with inlet, ball valve float and handle including bracket including PVC connection complete all as specified and directed by Engr-in-Charge

S&F in repair Flush pipe or polythene of low or high density or PVC 32mm dia for low level cistern complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm dia Bib taps, cast copper alloy long body chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified.

S&F Grating doom 125mm dia. with waste hole of CP (minimum weight 40 gms), complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm dia Stop valves/ angle valve, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm dia fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed by Engr-in-Charge.

M&L for Aluminium anodized frame for door, windows, ventilators, partition wall of section 83mm x 44mm x 1.50mm with one or more rebates including joining cleats for fixing necessary lugs complete frame work complete all as specified.

M&L for Aluminium anodized door shutter with two panel made of vertical style and top rail 83mm x 44mm, bottom rail 150mm x 44mm and middle rail 115mm x 44mm, all aluminium section shall be 1.50 mm thick, including all fittings per door shutter such as aluminium door handles round type/ curved ‘D’ type – 2 Nos., stainless steel hinges 100 mm size – 3 Nos., central mortise lock, aluminium tower bolts 200 mm – 2 Nos., double leg aluminium anodized door stopper and hydraulic door closer, designation No. 2, universal type, cast iron body, PVC door cill at bottom to each leaf, ISI marked and necessary clips, rubber packing and aluminium beading to receive 5.0 mm thick plain frosted glass or 12 mm thick prelaminated board in top and bottom panel, complete all as specified and as directed by the Engineer-in-Charge. Note: Plain/Frosted glass and prelaminated board shall be measured and paid for separately.

M&L for Aluminium anodized window shutter side hung type without sash bars, section 83 mm x 44 mm x 1.50 mm thick, including necessary jointing cleats, glazing clips, aluminium anodized snap beading, screws, rubber packing, aluminium anodised fitting such as stainless steel stay 150mm long - 01 No., 100 mm size ‘D’ type handle(decorative type) 01 No., tower bolt 150mm long - 02 Nos, stainless steel hinges 75mm size-02 Nos Nos in each shutter with necessary fittings & fixtures, with and including rubber packing and aluminium beading to receive 5.0 mm thick plain tinted glass, complete all as specified . Note: Plain/frosted glass shall be measured and paid for separately.

M&L for 12 mm thick Prelaminated particle board, interior grade, prelaminated one sides with decorative choice lamination & other side balancing white lamination as in door/wall, fixed with screws to aluminium frame complete all as specified.

Demolition of cement concrete of any description and in any position not otherwise specifically provided and removing the demolished material complete all as specified and directed by Engr-in-Charge

M&L for 75mm thick Plain cement concrete tye C-2 (1:3:6) (using 40mm graded crushed stone aggregate) as in sub base/plinth protection complete all as specified and directed by Engr-in-Charge.

M&L for 40mm thick cement concrete type B-1(1:2:4) (using 20mm graded crushed stone agg), as in flooring incl finishing the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for second class soft wood 1.218mx0.198mx8.3mm thick non glue laminated wooden boarding as in flooring including 0.6mm PE poly moisture foam as in underlay barrier of overlapping 20cm fix them with adhesive tape, boarding fixed in floating manner including taking down existing wooden/PVC flooring complete all as specified and directed by Engr-in-charge.

Taking down existing point wiring from walls and ceiling ,tube light bulb point ,ceiling fans etc and refixing the same after fixing of wall panelling in same position or as specified.

Note : Schedule of Credit Rs. 35,470.00 (Rupees thrity five thousand four hundred seventy only) will be deducted from the total amouont quoted while accepting the bid. Details of Schedule of credit is given in tender documents

M/S NEHA BUILDERS

M/S ADHISH ENGINEERS

k.s.construction

MADHAV CONSTRUCTION COMPANY