Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.6 LAccepted-AOC | L1 | Accepted-AOC Being lowest. | |
| 2 | L2₹20.4 L+₹2.7 L (15.5%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹22.3 L+₹4.7 L (26.4%)Rejected-Finance AMBARI PO KAMALA BAGAN DIST DARJEELING WEST BENGAL 734 426 | DARJEELING | WEST BENGAL | 734426 | L3 | Rejected-Finance Not Lowest | |
| 4 | Rejected-Technical 1 128 A SECOND FLOOR MOHAMMADPUR NEAR BHIKAJCAMA PLACE NEW DELHI 110066 | NEW DELHI | NEW DELHI | DELHI | 110066 | - | Rejected-Technical Bidder requested not to open financial bid through official e-mail on 30 Apr 2026. Hence, rejected. |
| Sl No | Description | Qty | Unit | SRI SURAJIT SENGUPTA L1 | M S ALOK SAHA L2 | ANJALI CONSTRUCTION L3 |
|---|---|---|---|---|---|---|
| 1.00 | Injecting Grouting :- M & L for supply and application of an expanding grout admixture intraplast EP for pressure grouting in holes using min 15mm dia, 100mm long PVC nozzles 1m c/c in the concrete with the help of 200mm long dummy rod. Dummy rod should be removed after the initial set of concrete complete as per manufacturers instruction. Extra nozzles are to be provided along the construcion joint. | 2,240 | EACH HOLE | 350 ₹7,84,000 Lowest | 400 ₹8,96,000 | 444 ₹9,94,560 |
| 2.00 | Surface Preparation :-
Cleaning of surface to remove dust and loosely adhering particles completely. | 560 | SQM | 20 ₹11,200 Lowest | 38 ₹21,280 | 32 ₹17,920 |
| 3.00 | Waterproof coating :- The prepared surface shall be treated with a two component acrylic polymer modified, cementitious, ready to use, flexible waterproofing slurry at right angles to each other and taking the coatings over the vertical parapet upto at lest 300mm on the exterior surface of the parapet., a glass fibre cloth shall be put between two coats complete as per manufacturers instruction.
Technical parameters of the coating system :-
Tensile Strength ~ 2 N/MM2 after 28 days (According to ASTM D412)
Pullout Bond Strength ~ 2 N/MM2 (concrete failure) (According to ISO 4624)
Slant-Shear Bond strength ~ 4 N/MM2 (According to FIP 5.15)
Elongation at Break 40% (Accoring to ASTM D 412)
Workable time ~ 30 minutes at + 27 o C
Water permealility Passes (According to IS 2645)
Water absorption Negligible
Accelerated weathering, 500 hours. No chalking or cracking on the film (According to IS101) | 560 | SQM | 1,500 ₹8,40,000 Lowest | 1,700 ₹9,52,000 | 1,897 ₹10,62,320 |
| 4.00 | M & L for providing a 15 mm thick cement plaster (1:4) on the waterproof coated surfaces. The screed should be prepared by mixing integral waterproofing compound as per recommended dose of the manufacturer complete all as specified and directed | 560 | SQM | 230 ₹1,28,800 Lowest | 300 ₹1,68,000 | 278 ₹1,55,680 |
Tender Value
₹22.8 L
EMD Value
₹45,600
Closing Date
20 Apr 2026, 6:00 pmClosed
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
SPECIAL REPAIR TO LIFT WELLS AT SEVOKE ROAD MIL STN UNDER GE SEVOKE ROAD
2026_MES_758700_1
8592/SEV OF 2026-27
Open Tender
Civil Works
Item Rate
180 days
GE SEVOKE ROAD
As per tender documents
8 documents required · 8 mandatory
₹500
GE SEVOKE ROAD
₹45,600
22 Jun 2026
31 Mar 2026
23 Apr 2026
31 Mar 2026
20 Apr 2026
14 Apr 2026
1 Apr 2026 - 9 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| - | Injecting Grouting :- M & L for supply and application of an expanding grout admixture intraplast EP for pressure grouting in holes using min 15mm dia, 100mm long PVC nozzles 1m c/c in the concrete with the help of 200mm long dummy rod. Dummy rod should be removed after the initial set of concrete complete as per manufacturers instruction. Extra nozzles are to be provided along the construcion joint. | - | EACH HOLE | - | - |
| - | Surface Preparation :-
Cleaning of surface to remove dust and loosely adhering particles completely. | - | SQM | - | - |
| - | Waterproof coating :- The prepared surface shall be treated with a two component acrylic polymer modified, cementitious, ready to use, flexible waterproofing slurry at right angles to each other and taking the coatings over the vertical parapet upto at lest 300mm on the exterior surface of the parapet., a glass fibre cloth shall be put between two coats complete as per manufacturers instruction.
Technical parameters of the coating system :-
Tensile Strength ~ 2 N/MM2 after 28 days (According to ASTM D412)
Pullout Bond Strength ~ 2 N/MM2 (concrete failure) (According to ISO 4624)
Slant-Shear Bond strength ~ 4 N/MM2 (According to FIP 5.15)
Elongation at Break 40% (Accoring to ASTM D 412)
Workable time ~ 30 minutes at + 27 o C
Water permealility Passes (According to IS 2645)
Water absorption Negligible
Accelerated weathering, 500 hours. No chalking or cracking on the film (According to IS101) | - | SQM | - | - |
| - | M & L for providing a 15 mm thick cement plaster (1:4) on the waterproof coated surfaces. The screed should be prepared by mixing integral waterproofing compound as per recommended dose of the manufacturer complete all as specified and directed | - | SQM | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.50 MB
BOQ_849807.xls
BOQ • 0.28 MB
TENDERDOCUMENTS8592.pdf
Tender Documents • 1.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .