Construction of Multi-purpose hall Phase -2 at 2nd Floor of Main office building at IIPA, IP Estate, Ring Road, New Delhi.

GRAND TOTAL 10717767.58

Providing and laying in position cement concrete of specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) cum 10.00 5789.60 57896.00

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses,

5.2 plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth

level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement:

DRAFT- ESTIMATE FOR CLASSROOM PROECT PHASE-2, IIPA NEW DELHI

CLASS ROOM - PHASE 2

S.NO DSR 19/MR ITEM DESCRIPTION UNIT QTY. RATE AMOUNT AMOUNT

(DSR) (Non DSR)

5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) cum 0.21 9306.00 1926.34

14 5.9 Centering and shuttering including strutting, propping etc. and removal of form for

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers sqm 93.39 552.05 51554.29

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts sqm 23.35 733.70 17129.51

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and

binding all complete above plinth level.

5.22a.1 Mild steel and Medium Tensile steel bars Kg 1500.86 82.10 123220.81

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement

concrete for reinforced cement concrete work, using cement content as per approved design mix,

including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing

16 5.33 and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate,

retard setting of concrete, improve workability without impairing strength and durability as per

direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330

kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).

5.33.2 All works above plinth level upto floor V level cum 12.01 9400.85 112875.07

Providing and laying autoclaved aerated cement blocks (AAC block) of 100mm thick for toilet

filling/slope. Rate includes the placing of works & unloading the material.

TOTAL (Carried Over to Concrete and RCC works) 365048.53 15501.66

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure

above plinth level up to floor V level in all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 12.44 7590.45 94391.23

Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in

super structure above plinth and upto floor V level.

6.45.2 Cement mortar 1 : 4 (1 cement : 4 coarse sand) sqm 81.17 917.00 74433.81

Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half

brick masonry (with F.P.S. bricks).

TOTAL (Carried Over to Brick Work) 175326.83 0.00

MARBLE AND GRANITE WORKS

Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine

cut for kitchen platforms, vanity counters ,window sills , facias and similar locations of required size of

21 8.2 approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse

sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including

rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.

8.2.2 Granite of any colour and shade

8.2.2.2 Area of slab over 0.50 sum. (Granite having basic rate not less than Rs. 2000 per sqm) sqm 1.86 4007.65 7454.23

Extra for providing edge moulding to 40 mm thick Sand stone counters, Vanities Planter etc. including

machine polishing etc. complete as per design approved by Engineer-in-Charge.

8.3.2 Granite work metre 6.12 376.25 2303.73

Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of

width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete.

DRAFT- ESTIMATE FOR CLASSROOM PROECT PHASE-2, IIPA NEW DELHI

CLASS ROOM - PHASE 2

S.NO DSR 19/MR ITEM DESCRIPTION UNIT QTY. RATE AMOUNT AMOUNT

(DSR) (Non DSR)

Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform,

24 8.5 vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar each 1.00 734.55 734.55

taps etc. including rubbing and polishing of cut edges etc. complete.

TOTAL (Carried Over to Marble and Granite Work) 10758.40 0.00

WOOD AND PVC WORKS

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought

25 9.1 framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold

fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood cum 0.16 130183.05 20625.88

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type,

26 9.21 core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply

veneering with vertical grains or cross bands and face veneers on both faces of shutters :

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. sqm 14.07 1886.70 26545.87

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of

shutters (over all area of door shutter to be measured) Over item no. 9.21.

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever

handles of approved quality with necessary screws etc. complete.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer

9.84 (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door 6.00 851.60 5109.60

width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede

30 9.127 finish with high density protective surface layer and reverse side of adhesive bonding quality

conforming to IS : 2046 Type S including cost of adhesive of approved quality.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc.,

including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the

same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary

31 10.28 accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the kg 74.55 575.45 42899.80

floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for

payment purpose only weight of stainless steel members shall be considered excluding fixing

accessories such as nuts, bolts, fasteners etc.).

TOTAL (Carried Over to Wood and PVC Work) 133220.47 0.00

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a

32 11.3 floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate sqm 20.00 498.35 9967.00

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer)

with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours

33 11.41 and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement

slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc.,

DRAFT- ESTIMATE FOR CLASSROOM PROECT PHASE-2, IIPA NEW DELHI

CLASS ROOM - PHASE 2

S.NO DSR 19/MR ITEM DESCRIPTION UNIT QTY. RATE AMOUNT AMOUNT

(DSR) (Non DSR)

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as

curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick

stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and

jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching

shade including rubbing , curing and polishing etc. all complete as specified and as directed by the

Engineer-in-Charge.

11.56.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. sqm 6.12 3526.60 21592.95

TOTAL (Carried Over to Flooring Work) 738319.00 0.00

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400

micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat

cement, rounding the edges and making and finishing the outlet complete.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of

special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm

(both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with

flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash

fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers

of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger

fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to

centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26

mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular

to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at

every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm

and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm

centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling

section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c,

including jointing and finishing to a flush finish of tapered and square edges of the board with

recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering

upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's

specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts

made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and

direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS

certification marks)

12-45-3 12.5 mm thick tapered edge gypsum moisture resistant board sqm 32.76 1286.20 42135.91

DRAFT- ESTIMATE FOR CLASSROOM PROECT PHASE-2, IIPA NEW DELHI

CLASS ROOM - PHASE 2

S.NO DSR 19/MR ITEM DESCRIPTION UNIT QTY. RATE AMOUNT AMOUNT

(DSR) (Non DSR)

Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing

and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the

perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre,

suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with

help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and

main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and

width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction

perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier

and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized

@ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with :

GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with

25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20%

perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder

coated of thickness 60 microns (minimum), including factory painted after bending and perforation.

Supply & Installation of superior resillient & cost effective alternative to real wood panelling .created

from the fusion of hardwood fibers with polymer resins . WPC (wood polymer composite) panels are pre

finished . Ready to install completely . Water & Termite proof & durable enough to last a lifetime. The

WPC shall be in size of 116"(L) X 7.7"(W) X 14 mm

METAL CEILING FOR REST OF AREA PENDING FROM DESIGN DUO - "Supplying and Installing 225C Plain

GP Powder Coated false ceiling.

Panels : 225C mm wide x 15.5 deep bevel edge, panel length up to 5mtr. formed out of fabricated from

0.50mm thick Galvanized Sheet (120 GSM Zinc coating mass total of both sides, 240Mpa yield stress).

39 MR The top of the panel shall have 50-60 micron polyester powder coated finish. The panel about each sqm 260.96 1928.00 503130.88

other with a narrow A groove.

Panel Carrier: 32mm wide, 39mm deep, made out of 0.50mm galvanized steel up to 5mtr. made of

double backed enameled black with cutout to hold on panel in a module of 225mm close"

TOTAL (Carried Over to Roofing Work) 87512.75 982999.00

FINISHING WORKS

40 13.1 12 mm cement plaster of mix :

41 13.2 15 mm cement plaster on the rough side of single or half brick wall of mix :

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse

42 13.12 sand) and a top layer 6mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sqm 41.88 416.55 17445.11

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the

surface even and smooth complete

Finishing walls with textured exterior paint of required shade :

44 13.45 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of sqm 41.88 232.00 9716.16

exterior primer applied @ 2.20kg/10 sqm

45 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior

primer applied @ 2.20 kg/ 10 sqm)

DRAFT- ESTIMATE FOR CLASSROOM PROECT PHASE-2, IIPA NEW DELHI

CLASS ROOM - PHASE 2

S.NO DSR 19/MR ITEM DESCRIPTION UNIT QTY. RATE AMOUNT AMOUNT

(DSR) (Non DSR)

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50

46 13.82 grams/ litre, of approved brand and manufacture, including applying additional coats wherever

required, to achieve even shade and colour.

Providing and fixing Glass Reinforced Concrete (G.R.C) Screens (As per drawing) Casted with Power

Spray Concrete Mix Design in approved design, thickness and color. Border Thickness: 40-50mm, Inner

Membrane: 30-35mm of approved make (Unistone or eq.) including cost of M.S. framed Structure

required to mount the screens including all necessary hardwares.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be

specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green,

48 8.31 black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm sqm 57.70 1030.30 59444.19

thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg

per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Supplying and laying true to line and level Primium Quality Printed Tiles Wall Tiles of approved brand

conforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-

modular sizes for tiles with Water Absorption (av.) ≤ 0.08 %] in floor, skirting etc. set in 20 mm thick

sand cement mortar (1:4) bed prepared after application of slurry using 1.75Kg of cement per Sqm over

the base and 2mm thick cement slurry using cement @2.91Kg./sqm at the back side of the tiles and laid

over the mortar bed using 0.2 kg/sqm of White cement used for joint filling with approved pigment as

directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using

soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other

incidental charges complete true to the manufacturer's specification and direction of Engineer-in-

TOTAL (Carried Over to Finishing Work) 238794.53 853731.39

ALUMINIUM WORKS

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built

up standard tubular sections/ appropriate Z sections and other sections of approved make conforming

to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold

fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required

PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed

mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling,

C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of

Engineer-in-charge. (Glazing and panelling to be paid for separately) :

21.1.1 For fixed portion.

50.1 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 17.85 456.30 8144.96

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making

21.1.2 provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required

(Fittings shall be paid for separately).

50.2 21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 8.93 546.35 4876.17

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with

51 21.3 EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of

Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) sqm 1.40 1296.40 1820.15

DRAFT- ESTIMATE FOR CLASSROOM PROECT PHASE-2, IIPA NEW DELHI

CLASS ROOM - PHASE 2

S.NO DSR 19/MR ITEM DESCRIPTION UNIT QTY. RATE AMOUNT AMOUNT

(DSR) (Non DSR)

Filling the gap in between aluminium frame, Upvc frame & adjacent RCC/ Brick/ Stone work by

52 21.8 providing weather silicon sealant over backer rod of approved quality as per architectural drawings and

direction of Engineer-in-charge complete.

21.8.1 Upto 5mm depth and 5 mm width metre 3.57 79.45 283.64

TOTAL (Carried Over to Aluminium Work) 15124.91 0.00

WATERPROOFING WORKS

Surface preparation: Clean the application surface with wire brush or grinder as required. Remove all

loose particles and sprinkle water to make the surface in SSD condition.

Application: Proding and applying Dr. Fixit Pidifin 2K or eqv. (Acrylic Polymer Cementitious Waterproof

Coating for all wet areas) a two component cementitious coating system for waterproofing of wet areas

. Providing and Applying Two Component High Performance Polymer Modified Cementitious flexible

waterproof coating @ 0.5 - 0.6 Sqm/Kg for 2 Coats which has got following technical properties:- 1) 155.03 481.60 74664.13

Elongation of 50% elongation as per ASTM D 412; 2) Crack Bridging up to 1mm as per ASTM C 836; 3)

Water penetration(5 bar pressure) as per DIN1048 - Passes; 4) Tensile strength of 1 N/mm2 as per ASTM

D 412; 5) Reduction of Rapid Chloride Permeability 92% as per ASTM C1202-97.

Apply 10-15mm protection plaster over coating mix with Dr. Fixit Pidiproof LW+ @200ml per bag of

cement as per IS:2645.

TOTAL (Carried Over to Waterproofing Work) 121546.26

INDOOR LANDSCAPE

Providing and displaying of Areca Palm having ht. 1.80 m to 2.10 m with 8 to 10 suckers, well developed,

54 MR fresh and healthy with lush green foliage in 30 cm size of Earthen pot/Plastic pot & as per direction of each 4.00 349.55 1398.20

the officer-in-charge.

Providing and stacking of Grevillea robusta (Silver Oak) of height 150-165 cm. in big poly bags of size 25

cm as per direction of the officer-in-charge.

Providing and displaying of Seaforthia Palm plant, having ht. 90cm to 1.20 m with 6-8 suckers, well

56 MR developed, fresh and healthy lush green leaves from bottom to top in 20 cm size of Earthen pot/Plastic each 2.00 358.75 717.50

pot & as per direction of the officer-in-charge.

Providing and displaying of Money Plant Broad Leaves mounted on moss stick 1.20 m ht., 5 to 6 plants in

57 MR each pot, well developed with full of fresh & healthy leaves in size of 25 cm Top dia x 18 cm Bottom dia each 2.00 246.00 492.00

x 25 cm Perpendicular height Earthen pot/Plastic pot & as per direction of the officer-in-charge.

Providing and Displaying of Spathiphyllum (peace lily), having 15 cm to 25 cm ht. blooming stag with

58 MR fresh & healthy foliage well developed in 15 cm of Earthen pot/plastic pot as per direction of officer-in- each 2.00 92.25 184.50

Providing and displaying of Philodendron Envy plant, mounted on moss stick 90 cm ht., well developed

59 MR with full of fresh & healthy leaves in 30 cm size of Earthen pot/Plastic pot & as per direction of the each 2.00 430.50 861.00

officer-in-charge.

Providing and displaying of Syngonium golden plant, mounted on moss stick 90 cm ht., 3 to 4 plants

60 MR placed in each pot at equal distance, well developed with full of fresh & healthy leaves from bottom to each 2.00 193.75 387.50

top in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.

Providing and supplying of high quality polymer resin, UV stabilized and non-fading rectangular

61 MR planters.Can be used for both outdoor & indoor. (texture,Shade/ Color as per selection). Size 40(D1) X each 18.00 1144.00 20592.00

DRAFT- ESTIMATE FOR CLASSROOM PROECT PHASE-2, IIPA NEW DELHI

CLASS ROOM - PHASE 2

S.NO DSR 19/MR ITEM DESCRIPTION UNIT QTY. RATE AMOUNT AMOUNT

(DSR) (Non DSR)

Providing and fabricating M.S. structure to support vertical green wall and including fixing with existing

Building provided by the client.

• UV stabilized Poly propylene module of size 21” x 7”. Each module having specially designed angle to

maintain center of gravity, including supply of the hardware of the same.

• Providing and filling green wall modules with classified composition of longevity enabled growth

media having water retention properties enriched with natural mineral

nutrients and slow releasing natural fertilizers.

• Providing & planting of suitable plants well settled and growing in longevity enabled light weight

nonbiodegradable growth medium. Selected on the basis of temperature, incidence of sun light and

humidity on site, in pattern finalized in consultation with client/department and as per direction of

Enginner-in- charge.

• Supply and installation of 16mm liner low density polyethylene lateral pipe and fixing Drippers (@ 2

Ltr discharge per hour) for supplying water to green wall modules including water tight GI trays with all

fittings (Carried

TOTAL and fixtures.

Over(Water inlet & Work)

to Landscape outlet point shall be provided by the client). 4240.70 42177.84

MISCELLANEOUS WORKS

VANITY COUNTER IN TOILET

Providing and fixing of Vanity Counters made of 19mm thick commercial board with 12mm solid acrylic

NSI surface on top as per selection with intermediate shelves The rate to include providing and fixing 6.12 24276.00 148639.03

Stainless steel handles, knobs, locking arrangements, magnetic catchers, slow motion hinges etc.

complete in all respects.(face area to be measured)

TOILET CUBICLES

Providing and fixing Toilet cubical(of following standard dimension which includes 600mm door size

width) made up of thermosetting resign treated high pressure ,self supporting decorative compact

laminates with permanently incorporate anti-bacterial agents(under JIS Z2801:2000 certification)

during manufacturing .Compact board should be resistance to water immersion through permissible

increase on thickness and mass <0.60% and board density >1.35kg/cm3 and fulfilled the criteria of

green guard gold certification and manufactured under EN438-2&3:2005 standard. 12mm thick

compact board should be Moisture resistant, Impact resistant, termite resistant ,Scratch resistant

,Weather and climatic shock resistant. Finish of compact laminates should be suede finish which

includes door, pilasters and intermediate panels finished with approved texture/shades as per IS2046

and fulfilled the criteria of fire retardant under BS-476/97 and EN438-6 with classification of BS1D0

standard. The top supporting system will run above the ceiling to strengthen support the system it will

be settled on end walls with M.S "L" angles mid and Pilaster will be fixed with box top support(304

grade) and intermediate panels will attached to the wall with the help of approved SS(grade304)

channels and all required hardware, made up of stainless steel as per manufacturer’s specification..

Door knob, gravity hinges,Thumb turn locksets with occupancy indicators ,coat hooks with door stoper ,

U channel, top rail with corner connector, adjustable foot/pedestal,Rubber noice deafening tape, screw

& wall plugs should be approved under the instruction of Engineer-in-charge. . All screw will of 304

grade in SS with stain finish. All pilasters are supported by SS bottom cladding . The floor with a

clearance height upto 110 mm.Finish and colour of Toilet cubical should be approved under guidance of

engineer-in-charge.

DRAFT- ESTIMATE FOR CLASSROOM PROECT PHASE-2, IIPA NEW DELHI

CLASS ROOM - PHASE 2

S.NO DSR 19/MR ITEM DESCRIPTION UNIT QTY. RATE AMOUNT AMOUNT

(DSR) (Non DSR)

Toilet cubicle with standard dimension front 18mm thick with 2400mm(H)x1000(W), door size

600mmx1830mm), partition 12mm thick 1550mm depthx1930mm(H)(including gap of 110mm

URINAL PARTITIONS

Providing & Fixing Privy divider panel laminates(Urinal Partitions) coupled with rust resistant stainless

steel fitting .Composed with 12mm thick compact laminates with permanently incorporate anti-

bacterial agents during manufacturing .Compact board should be resistance to water immersion

through permissible increase on thickness and mass <0.60% and board density >1.35kg/cm3 and

fulfilled the criteria of green guard gold certification and manufactured under EN438-2&3:2005

standard. Urinal partition panel should consist of one undivided piece, chamfered edges with no joint in

between which provides a cleaner and well structured to restroom space. Dimension of Urinal partition

should be in 1000-1200mm in height and 450-550mm in depth and installed from the ground floor upto

gap in between 500-600mm . Finish and colour of Urinal partition should be approved under guidance

of engineer-in-charge. (Make : As per approved makelist)

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved

66 NSI primer on one face, and fixed on GI frame work, complete as per direction of Engineer-in- charge

(including cost of frame work).

12mm thick HDHMR Board conforming to IS : 1328 BWR type sqm 11.04 2515.00 27765.60

Providing and fixing of Gold Electroplated Halo Lit Logo Signage 462 mm With LED's as per the interior

design and direction of Engg-in-charge (Upto 20 letters and logo)

TOTAL (Carried Over to Miscellaneous Work) 0.00 337239.80

RENOVATION AND RESTORATION WORKS AT INDIAN INSTITUTE OF PUBLIC ADMINISTRATION, NEW DELHI.

CLASS ROOM-PART-II

SUMMARY - ELECTRICAL

Amount (In Rs.)

S No. DESCRIPTION

B ELECTRICAL WORKS

1 SUB HEAD-I: WIRING & SUBMAIN 261425.00 0.00

2 SUB HEAD -II: DISTRIBUTION BOARD 9385.00 2719.00

3 Head III : LIGHTING FIXTURES 40655.00 0.00

Total for Electrical Works 3,11,465.00 2,719.00

RENOVATION AND RESTORATION WORKS AT INDIAN INSTITUTE OF PUBLIC ADMINISTRATION, NEW DELHI.

CLASS ROOM - PART II

BILL OF QUANTITIES FOR ELECTRICAL WORKS

Amount (In Rs.)

S. No. DSR/MR Description Unit Qty. Rate

INTERNAL ELECTRICAL WORK

1.0 1 SUB HEAD-I: WIRING & SUBMAIN

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable in surface / recessed medium class PVC conduit, with modular

1.10 switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated

copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without

2.0 independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in

surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper

conductor single core cable etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated

3.0 1.14 copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

3.1 1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 650 167 108550

3.2 1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 250 200 50000

3.4 1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 25 249 6225

3.5 1.14.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire Metre 1 328 328

3.6 1.14.8 4 X 4 sq. mm + 2 X 4 sq. mm earth wire Metre 1 308 308

3.7 1.14.9 4 X 6 sq. mm + 2 X 6 sq. mm earth wire Metre 50 394 19700

3.8 1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 1 543 543

3.9 1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 1 752 752

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess,

4.0 including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch,

connections etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box

including connections but excluding modular plate etc. as required.

5.3 1.24.4 3 pin 5/6 A socket outlet Each 10 111 1110

5.4 1.24.5 6 pin 15/16 A socket outlet Each 10 175 1750

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess,

6.0 including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch,

connection etc. as required. (For light plugs to be used in non residential buildings).

RENOVATION AND RESTORATION WORKS AT INDIAN INSTITUTE OF PUBLIC ADMINISTRATION, NEW DELHI.

CLASS ROOM - PART II

BILL OF QUANTITIES FOR ELECTRICAL WORKS

Amount (In Rs.)

S. No. DSR/MR Description Unit Qty. Rate

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess,

7.0 1.32 including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular Each 17 495 8415

switch, connection etc. as required.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including

connection etc as required.

Total of Sub-Head - I carried to summary sheet 261425 0

2 SUB HEAD -II: DISTRIBUTION BOARD

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution

9.0 board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din

bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker

10.0 2.10 suitable for inductive load of following poles in the existing MCB DB complete with connections, testing

and commissioning etc. as required.

10.1 2.10.1 Single pole Each 24 199 4776

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following rating, four pole, 415 volts, MCB in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current

13.0 circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Total of Sub-Head - II Carried to summary sheet 9385 2719

Sub-Head - III: LIGHTING FIXTURES AND FAN

RENOVATION AND RESTORATION WORKS AT INDIAN INSTITUTE OF PUBLIC ADMINISTRATION, NEW DELHI.

CLASS ROOM - PART II

BILL OF QUANTITIES FOR ELECTRICAL WORKS

Amount (In Rs.)

S. No. DSR/MR Description Unit Qty. Rate

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with

DSR-1 BEE 5 Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2

star rated nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value

Ceiling fan (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019),

14 with Brush THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories Each 9.00 2688.00 24192.00

Less Direct including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance

Current (BLDC) more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as

motor required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate

15 1.25 switch box including connections but excluding modular plate etc. as required. Each 9.00 342.00 3078.00

Supply and installation of 300mm, 230V A.C exhaust fan in the existing opening including making good

16 MR the damage connection testing commissioning etc as required Havells : Ventil Air - DB NEO Each 2.00 1,741.00 3482.00

Erection of Fixtures:

Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing

17 1.35 upto two GLS/CFL/ LED lamps per fitting, complete with all accessories including connections etc. as Each 75.00 98.00 7350.00

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length

1.45 (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including Each 9.00 203.00 1827.00

providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection,

testing, commissioning etc. as required.

Total of Sub-Head - III carried to summary sheet Rs. 40655.00 0.00

Fire Detection System

S No. DSR/MR Description UNIT Qty Unit Price (Rs.) Total (Rs.)

ADDRESSABLE TYPE FIRE DETECTION SYSTEM

Supplying, installation, testing & commissioning of intelligent addressable thermal

1 17.2.4 detector with rate of rise cum fixed tempreature thermistor complete with base as Nos 1 2846.00 2846.00

required. (Smoke Detector )

Supplying, installation, testing & commissioning of intelligent addressable thermal

2 17.2.9 detector with rate of rise cum fixed tempreature thermistor complete with base as Nos 1 2713.00 2713.00

Supplying, installation, testing & commissioning of addressable manual call point

complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe

complete as required.

Supplying and drawing following sizes of FR PVC insulated copper conductor, single

core cable in the existing surface/ recessed PVC conduit as required

Supplying and fixing of following sizes of medium class PVC conduit along with

6 1.21 accessories in surface/recess including cutting the wall and making good the same in

case of recessed conduit as required.

Providing and fixing Fire Extinguishers (ABC Type ) complete with all accessories as

per manufacturers specifications.

Capacity 6 Kg (ABC Type) Each 5 1960.00 9800.00

Total Amount of Fire Detection System Rs. 44140.00

Total Amount of Fire Detection System Rs. 44140.00

BOQ for Light Fixtures

Sr. No. Image Description Watt Led clr Unit Qty Price Amount

Providing & Fixing Round adjustable recessed LED Downlighter EVO90 fitting

for false ceiling installation with Double Hosuing.( Avalaible Beam Angle

24°,36°,45°. Body in die-cast aluminium. Accessory Honeycomb Mesh . 220-

240V - 50/60Hz Non-Dimmable Power supply

Providing & Fixing Round recessed LED Downlighter EVO MINI fitting for

false ceiling installation.

Body in die-cast aluminium.. 220-240V - 50/60Hz Non-Dimmable Power

Providing & Fixing aluminium profile 10W/MTR LED STRIP with diffuser.

Light emission at 45° Silver painted aluminium.

3 Sizes as per Drawing mtr 28 1,327.00 37,156.00

4 Non - Dimmable Power supply. 100W NA Nos 4 2,389.00 9,556.00

Supply and Commissioning of Linear aluminium profile for Ra90 13W/ft i52

5 R LED STRIP with diffuser Light emission Diffused. Silver painted aluminium. nos 4 7,964.00 31,856.00

Size : 4feet x 4nos

6 Non - Dimmable Power supply. NA NA nos 4 2,389.00 9,556.00

Supply and Commissioning of Linear aluminium profile for Ra90 13W/ft i52

7 R LED STRIP with diffuser Light emission Diffused. Silver painted aluminium. nos 5 15,928.00 79,640.00

Size :8feetx 5nos

8 Non - Dimmable Power supply. NA NA nos 10 2,389.00 23,890.00

Total Amount 2,99,408.00

Total Amount 2,99,408.00

NAME OF WORK :PLUMBING WORKS (CANTEEN & TOILET -NEW DELHI)

S. NO. DSR/MR DESCRIPTION Unit Quantity) Rate in Rs Amount Rs.DSR Amount Rs.NDSR

A SANITARY INSTALLATIONS

Providing and fixing wall hung water closet of approved shape & make including

providing & fixing concealed cistern with dual flush fitting, of flushing capacity as per

1 MR the approaved make, including seat cover, and cistern fittings, nuts, bolts and gasket Each 5 14,341.15 71705.74

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass

pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings

2 MR and brackets, cutting and making good the walls wherever require: Each 4 8,689.61 34758.45

Size: 500x420x120mm

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as

3 17.10 per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of

fittings and brackets, cutting and making good the walls wherever required :

17.10.1 Kitchen sink with drain board

Providing and fixing P.V.C. waste pipe for sink or wash basin including

P.V.C. waste fittings complete.

17.28.2 Flexible Pipe

17.28.2.2 40 mm dia each Each 101.10 -

Providing and fixing mirror of superior glass (of approved quality) and of required

5 17.32 shape and size with plastic moulded frame of approved make and shade with 6 mm

thick hard board backing :

17.32.2 Rectangular shape 453x357 mm each Each 4 1,120.25 4,481.00

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and

as per the direction of Engineer-in-charge. each 883.05

Providing and fixing liquid soap Dispenser Poly carbonate ABS casing . manually

7 MR operated, 1000ml capacity, dispense volume 2 ml, size 230X105X85mm complete in all Each 2 2447.20 4,894.40

respect. Make Euronics or equivalent

Providing and fixing C.P. brass long nose bib cock of approved quality

conforming to IS standards and weighing not less than 810 gms.

18.50.1 15 mm nominal bore Each 6 618.80 3,712.80

Providing and fixing white vitreous china with integrated sensor urinal shall have pre

& post flushing with water, having water inlet from back side, including fixing to wall

9 with suitable brackets all as per manufacturers specification and direction of Engineer- Each 3 9,432.00 28,296.00

Supply, installation, testing and commissioning ABS health spray unit comprising of CP

10 MR flxible hose, spary, wall flange etc. complete. (jaquar or equivalent ) Each 6 1,042.00 6,252.00

Supplying, storing, handling, shifting, installation, testing and commissioning of C.P

11 MR brass central hole basin pressmatic pillar cock auto closing system complete in Each 6 8,441.00 50,646.00

respects. (Model as per approved make of list )

NAME OF WORK :PLUMBING WORKS (CANTEEN & TOILET -NEW DELHI)

S. NO. DSR/MR DESCRIPTION Unit Quantity) Rate in Rs Amount Rs.DSR Amount Rs.NDSR

Supplying, storing, handling, shifting, installation, testing and commissioning of 15mm

12 MR dia C.P. brass wall-mounted central hole sink mixer with swinging spout of approved Each 1 1,189.72 1,189.72

make and quality with all fittings and accessories etc. complete. (Model as per

approved make of list )

Providing and fixing C.P. brass angle valve for basin mixer and geyser

13 18.53 points of approved quality conforming to IS:8931

18.53.1 15mm nominal bore each 36 532.00 19,152.00

Providing and fixing toilet paper holder :

Providing and Fixing fully automatic "NO TOUCH" hand drier suitable to operate on

15 MR 220 volts, single phase 50 Hz, A.C power supply and directly plugged to power point Each 2 14,445.00 28,890.00

Total Amont of Sanitary Installations 35,848.65 2,33,696.71

C INTERNAL DRAINAGE INSTALLATIONS (NON-SCHEDULED ITEMS)

Providing, fixing, testing and commissioning of UPVC- SWR pipe conforming to IS :

13592- class B including all moulding fittings conforming to IS : 14735 such as tees,

16 MR bends, reducers, coupling, adaptor etc. solvent welded joints as per manufacturer

recommendation including cutting and making good the walls, floors, R.C.C. work etc.

75mm Pipe Meter 5 642 3,210.00

Providing, fixing, testing and commissioning of UPVC soil,waste pipe conforming to IS :

4985-2000 class III (6 kg) including all moulding fittings conforming to IS : 7834 (Part I

17 MR to Part-7) 1987 such as tees, bends, reducers, coupling, adaptor etc. solvent welded

joints as per manufacturer recommendation including cutting and making good the

walls, floors, R.C.C. work etc.

40 mm Pipe Meter 12 148 1,776.00

63 mm Pipe Meter 10 310 3,100.00

Provinding, Installing & fixing in position UPVC (100mm dia. outlet) SWR traps of

selfcleansing design with one two or three inlet connections following sizes including

providiing PVC adapter with solvent cement joints complete and connection with

waste pipes including providing & fixing of PVC grating fixed over the trap complete.

(The rate should also include cutting hole in floors and making good the same.)

110 mm diameter pipe Each 5 773 3,865.00

Providing and fixing end cap (door piece) of Upvc for cleaning Each 3 718 2,154.00

Total Amount of Internal Drainage Installations - 84,585.00

Total Amount of Internal Drainage Installations - 84,585.00

NAME OF WORK :PLUMBING WORKS (CANTEEN & TOILET -NEW DELHI)

S. NO. DSR/MR DESCRIPTION Unit Quantity) Rate in Rs Amount Rs.DSR Amount Rs.NDSR

D WATER SUPPLY INSTALLATIONS

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded fittings,

i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &

19 18.8 fittings with one step CPVC solvent cement and the cost of cutting chases and making -

good the same including testing of joints complete as per direction of Engineer in

Charge.Concealed work, including cutting chases and making good the walls etc.

18.8.1 15 mm nominal outer dia pipes Meter 65 409.65 26,627.25

18.8.2 20 mm nominal outer dia pipes Meter 45 478.15 21,516.75

18.8.3 25 mm nominal outer dia pipes Meter 25 561.95 14,048.75

Providing and fixing of gun metal gate valve with CI wheel of approved quality

18.17.1 25mm dia, nominal bore Each 2 497.15 994.30

21 18.16 Providing and fixing of brass stop cock of approved quality (screwed ends)

18.16.2 20 mm dia, nominal bore Each 2 326.45 652.90

Structural steel work riveted, bolted or welded in built up sections, trusses and framed

22.0 10.2 work, including cutting, hoisting, fixing in position and applying a priming coat of kg 20 101.75 2,035.00

approved steel primer all complete.

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar

1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top

diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and

RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm

23 18.33 nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine

sand : 10 graded stone aggregate 40 mm nominal

size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm

thick, finished with a floating coat of neat cement complete as per standard design :

18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 each 1 9,288.40 9,288.40

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with

plastic floats complete :

18.18.3 25 mm nominal bore Each 1 394.00 394.00

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS

: 12701 marked, with cover and suitable locking arrangement and making necessary

25 18.48 holes for inlet, outlet and overflow pipes but without fittings and the base support for per litre 500 8.80 4,400.00

Providing and fixing in position 25 mm diameter mosquito proof coupling of approved

municipal design.

Total Amount of Water Supply Installations 80,002.35 -

Total Amount of Water Supply Installations 80,002.35 -

NAME OF WORK :PLUMBING WORKS (CANTEEN & TOILET -NEW DELHI)

S. NO. DSR/MR DESCRIPTION Unit Quantity) Rate in Rs Amount Rs.DSR Amount Rs.NDSR

E EXTERNAL SEWERAGE NETWORK

Excavating trenches of required width for pipes, cables, etc including excavation for

sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including

getting out the excavated soil, and then returning the soil as required, in layers not

27 2.10 exceeding 20 cm in depth, including consolidating each deposited layer by ramming,

watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m

2.10.1 All kinds of soil

Pipes, cables etc. exceeding 80 mm dia. but not

exceeding 300 mm dia

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse

28 19.2 sand : 10 graded stone aggregate 40 mm nominal size) all-round

S.W. pipes including bed concrete as per standard design :

19.2.1 100 mm diameter S.W. pipe metre Meter 10 817.00 8,170.00

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating

brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size

(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than

2.70 kg as per standard design:

19.4.2 150 x 100 mm size P type

19.4.2.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 2 2317.40 4,634.80

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement

: 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-

III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1

cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),

30 19.7 inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand)

finished with floating coat of neat cement and making channels in cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

finished with a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty)

19.7.1 455x610 mm internal dimensions, total weight of cover and frame to be not less than

38 kg (weight of cover 23 kg and weight of frame 15 kg) :

19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 2 10,905.05 21,810.10

Making connection of drain or sewer line with existing manhole including breaking

into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2

coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on

31 19.21 both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating

coat of neat cement and making necessary channels for the drain etc. complete :

19.21.1 For pipes 100 to 250 mm diameter each 1 623.50 623.50

NAME OF WORK :PLUMBING WORKS (CANTEEN & TOILET -NEW DELHI)

S. NO. DSR/MR DESCRIPTION Unit Quantity) Rate in Rs Amount Rs.DSR Amount Rs.NDSR

Total Amount of External Sewage Work 38,880.40 -

Total Amount of External Sewage Work 38,880.40 -

RENOVATION AND RESTORATION WORKS AT INDIAN INSTITUTE OF PUBLIC ADMINISTRATION, NEW DELHI.

S. No. DSR/MR Item Description UOM Qty Rate

Designing, providing, installing and fixing factory finished custom designed cold form Light Gauge Steel Framed super structure

comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design

requirements. The steel sheet shall be galvanized (AZ-150gms Aluminium Zinc Alloy coated steel having minimum yield strength

300-550 Mpa) conforming to AISI specifications and IBC 2009 for cold formed steel framing and construction and also as per IS:

875-1987, ISO 800- 1984 and IS:801- 1975. The wind load shall be as per provisions of IS 875 (part -III). LGSFS frame shall be

designed as per IS: 801 using commercially available software such as Frame CAD Pro-11.7/ STAAD PRO-V8i/ArchitekV2.5.16/ Revit

architecture-2011 orequivalent. Proper usage of Connection Accessories like Heavy Duty Tension Ties, Light Duty Hold-ons, Twist

Straps (to connect truss with wall frames), Strong Tie, Tie Rod, H-Brackets, Boxing Sections, L-Shaped Angles for better structural

stability. The framing section shall be cold form C-type having minimum web depth 89 mm x 39mm flange x 11mm lip in required

length as per structural design requirement duly punched with dimple/slot at required locations as per approved drawings. The

slots will be along centre line of webs and shall be spaced minimum 250mm away from both ends of the member. The frame can

be supplied in panelized or knock down condition in specific dimensions and fastened with screws extending through the steel

beyond by minimum of three exposed threads. All self drilling tapping screws for joining the members shall have a Type II coating

in accordance with ASTM B633(13) or equivalent corrosion protection of gauge 10 & 12, TPI 16 & 8 of length 20mm. The frames

shall be fixed to RCC slab or Tie beam over Neoprene rubber using self expanding carbon steel anchor bolt of dia as per approved

drawings. design subject to minimum 12mm diameter and 121mm length conforming to AISI 304 and 316 at 500mm c/c with

minimum embedment of 100mm in RCC (RCC to be paid separately) and locatednot more than 300mm from corners or

termination of bottom tracks complete in all respects. The item also includes the submission of stability reports duly examined

and issued by any NIT/IIT. The rate includes the concept design, detailed design, fabrication of sections, transportation, installation

and all required fixing arrangement at site as described above.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in

10.16 position and applying a priming coat of approved steel primer, including welding and

bolted with special shaped washers etc. complete.

10.16.1 Hot finished welded type tubes kg 8421.60 143.45 12,08,078.52

Providing and fixing of external wall system on Light gauge steel frame work with . Outer face having 6mm thick heavy duty fiber

cement board fixed on 9mm thick heavy duty fiber cement board confirming to IS 14862:2000, category IV type A (High pressure

steam cured) as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make. A grove of 2

mm to 3mm shall be maintained and groves shall be sealed with silicon based sealant. The board shall be fixed in a staggered

3 26.42 pattern.Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm sqm 15 3418.95 51,284.25

and internal face 12.5mm thick gypsum plaster board fixed on 8mm thick fiber cement board confirming to IS 14862:2000 of

category III type B (High pressure steam cured) as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c

of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for

seamless finish.(cost of frame work to be paid for separately).

Providing and fixing in all exterior face panels breathable vapour barrier underneath the cement fiber board as per National

Building Code 2009 complete as per direction of Engineer-in-charge.

Providing and fixing internal wall panels on Light gauge steel frame work with 12.5mm thick gypsum plaster board conforming IS

2095:2011 fixed on 8mm thick fiber cement board conforming to IS 14862:2000 of category III type B (High pressure steam cured)

as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make, Screws shall be of counter

sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. Proper taping and jointing to be

done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for

Providing and fixing 50mm thick puff panels with all hardwares, screws, rivets, silicon filling, etc. complete in all respect as per

direction of Engineer in charge

4 MR Providing and fixing 0.5mm thick PPGI roof sheeting including all accessories complete in all respect SQM 564 593.57 3,34,771.71

5 MR PROOF CHECKING OF BUILDING BY IIT/NIT Lot 1 94490.00 94,490.00

TOTAL Amount of Structural Work 13,31,407.82 3,58,373.09

TOTAL Amount of Structural Work 13,31,407.82 3,58,373.09

SITC of Solar System at Construction of T.N.C Memorial Hall, Phase 2, IIPA, New Delhi

Sno. Particulars Unit Qty Amount

SITC of ON GRID system Mono+ solar edge Inverter With Optimizer

Capacity - 57.76 KWP power plant complete in all respect

380Wp-72 cells, Mono Perc -152 Nos.

DC DISTRIBUTION BOX + Optimizer

Power Optimizer P-801 - 76 nos.

DCDB 6 in 6 Out with single SPD-1 no.

SOLAR ON GRID INVERTER

Solar On-Grid 55.5KW(3 Phase) Inverter-12 Years - 1no.

AC DISTRIBUTION BOX - 1no.

ACDB 125 A incoming and outgoing with MFM and type 2 SPD - 1no.

SOLAR MODULE TO DCDB

1 C X 4 Sq mm Solar cable XLPO- Flexible tinned copper stranded class -5 conductors as per IEC-60228, Insulation – Cross

Polyolefin, Outer sheath – Halogen free Polyolefin Black Color

1 INVERTER TO ACDB Job 1 3003520 3003520.00

4 C X 25 Sq mm, Cu Conductor, XLPE Insulated, Unarmound

ACDB TO LT ROOM PANEL

3.5 C X 70 Sq mm Al conductor, XLPE insulated, Armoured Cables from ACDB to LT

EARTHING SYSTEM

FOR STRCUTRE, DCDB, INVERTER, ACDB

1C X 16sqmm, Copper Conductor, Unarmoured

Earthing Chemical gel earthing Kit - 2 Mtr + 20 Kg bag as required

LIGHTNING ARRESTOR

ESE Type- 107 Mtrs Radius - 1no.

1C X 70sqmm, Copper Conductor, XLPE insulated Unarmoured

MODULE MOUNTING STRUCTURE

Structure Slant roof - 45980 watt

CONDUIT & CABLE TRAY

HDPE 25 mm PVC Pipe For Module Connection

INSTALLATION & COMMISSIONING complete

SITC of walkway in Posmac material having section 400X40X25mm with all accessories including Z clamp,

2 connector, Strut Channel, Bottom support, Leg support, C clamp, Nuts & Bolt, etc. complete in all respect as Rm 58 2500.00 145000.00

per drawing/ direction approved by Engineer in charge.

Total Amount 31,48,520.00

Total Amount 31,48,520.00