Repair to Sofa Set, GI Charpoy and other connected items of furniture at GE Faridkot Mil Stn.

Amount

SOFA SET 2/3 SEATERS: FD-1113:-

Removing old unserviceable legs and providing new legs of Ist class seasoned hard wood duly finished complete as specified and shown on drawing.

Removing old unserviceable front/rear rail and providing new front/rear rail of Ist class seasoned hard wood duly finished of section 35x100mm and 1535mm long complete as specified and shown on drawing.

Removing old unserviceable side rail and providing new side rail of Ist Class seasoned hard wood duly finished of section 35x100mm and 500mm long complete as specified and shown on drawing.

Removing old unserviceable battens and providing new battens of Ist Class seasoned hard wood duly finished of section 50x20mm and 500mm long complete as specified and shown on drawing.

Removing old unserviceable back rail and providing new back rail of Ist Class seasoned hard wood duly finished complete as specified and shown on drawing.

Removing old unserviceable cushion foam seat & back and S&F new cushion in the size of 21"x 22" x 4" of density 40, covered with superior quality tapestry cloth with best upholstery to seat and back of sofa set complete as specified and shown on drawing.

Removing old unserviceable tapestry cloth from cushion seat and S&F new tapestry cloth having rate not less than 250/- per mtr with best upholstery to seat of sofa set complete as specified and shown on drawing.

M & L for french polishing to wooden surfaces of Sofa set 3 seaters after preparing the surfaces smooth complete all as specified and directed.

M & L for french polishing to wooden surfaces of Sofa set 2 seaters after preparing the surfaces smooth complete all as specified and directed.

LOCKER BED SIDE STEEL FD-1029,FD- 257:-

Dismantling unserviceable/broken leg and S&F new leg made to shape, out of 1 mm thick mild steel sheet including gas welding complete all as specified and shown on drawing.

Taking down old unserviceable/damaged hasp and staple and providing new chromimum plated hasp and stapple 100mm long x25mm wide x 2.5 mm thick complete all as specified and directed..

Taking down old unserviceable/damaged handle and providing new chromium plated handle, 125mm long complete all as specified and directed.

M&L for Preparation of new or existing painted steel surfaces ( inside and outside) by carrying out denting, scraping old paint with sand paper, filling putty (wherever reqd) and applying one coat of synthetic enamel olive green paint with spray gun complete all as specified and directed

TABLE STEEL WITHOUT DRAWER 900X600X760 MM (FD-1007) :

Dismantling unserviceable leg and S&F new leg made to shape, out of 25mm square tube having wall thickness1.6mm by gas welding complete all as specified and shown on drawing.

Dismantling existing unserviceable top and S&F new top of 18mm thick prelaminated particle board, one side natural teak wook and other white (exterior grade) of size 900x600mm including providing 4mm thick teak wood beading alround the top after french polished complete all as specifed and shown on drawing.

M&L for welding of crack joints throughout, riveting where required and spray painting with one coat of synthetic enamel paint after preparation of steel surfaces complete all as specified and directed

Removing old existing unserviceable leg shoes and S&F new PVC hard rubber shoes of approved quality to bottom of leg complete all as specified and directed

TABLE STEEL WITH DRAWER 900X600X760 MM (FD-1008) :

Dismantling unserviceable leg and S&F new leg made to shape, out of 25mm square tube having wall thickness1.6mm by gas welding complete all as specified and shown on drawing.

Dismantling existing unserviceable top and S&F new top of 18mm thick prelaminated particle board, one side natural teak wook and other white (exterior grade) of size 900x600mm including providing 4mm thick teak wood beading alround the top after french polished complete all as specifed and shown on drawing

Dismantling existing unserviceable drawer and S&F new drawer made out of 1 mm thick PBI sheet including one coat of red oxide primer complete all as specifed and shown on drawing.

M&L for welding of crack joints throughout, riveting where required and spray painting with one coat of synthetic enamel paint after preparation of steel surfaces complete all as specified and directed

S&F in replacement of brass lock to the table by appropriate size steel screws / rivets complete all as specified and directed

Removing old existing unserviceable leg shoes and S&F new PVC hard rubber shoes of approved quality to bottom of leg complete all as specified and directed

TABLE OFFICE CLERK STEEL FD-84(M), FD-1004 :

Dismantling existing unserviceable top and S&F new top of 18mm thick prelaminated particle board, one side natural teak wook and other commericial of size 1200x610mm including providing 4mm thick teak wood beading alround the top after french polished complete all as specifed and shown on drawing

Dismantling existing unserviceable drawer and S&F new drawer made out of 1 mm thick PBI sheet including one coat of red oxide primer complete all as specifed and shown on drawing.

S&F in replacement of brass lock to the table by appropriate size steel screws / rivets complete all as specified and directed

Dismantling unserviceable leg and S&F new leg made to shape, out of 25mm square tube having wall thickness1.6mm by gas welding complete all as specified and shown on drawing.

Removing old existing unserviceable leg shoes and S&F new PVC hard rubber shoes of approved quality to bottom of leg complete all as specified and directed

Preparation of existing painted steel surfaces (inside and outside) by carrying out denting,scraping old paint with sand paper, filling putty (where required) and applying one coat of synthetic enemel (olive green) paint with spray gun complete all as specified and directed .

CHARPOY GI PIPE : FD-220 :

Dismantling old unserviceable long rail and S&F new long rail made out of GI tubing 32mm bore, medium grade( ISI marked) duly threaded at both ends complete all as specified and shown on drawing.

Cutting of old existing unserviceable long rail retrieved from item No. 6.1 here-in-before and converting into two short rails duly threaded at both ends complete all as specified and shown on drawing.

Dismantling old unserviceable short rail,cutting and converting into two legs,one end of leg be threaded and on other end, 40mm dia 3mm thick MS sheet by continuous welding be provided. MS clamp duly painted with black enameled paint shall be provided by welding all as shown on drawing complete all as specified and directed.

Removing old unserviceable 3 way elbow and S&F new 3 way elbow of GI, 32mm bore, (ISI Marked), weight not less than 400 grams each complete all as specified and directed.

Removing old unserviceable check nut and S&F new check nut of GI, 32 mm bore, weight not less than 100 gram eachs complete all as specified and directed.

Removing old unserviceable MDF Board top and S&F new top made of 12mm thick commercial plywood, BWR grade, 7ply, type BB, of size 900x1950mm, fixed with appropriate size nut & bolts with double washers complete all as specified and shown on drawing.

Removing old unserviceable plywood top and S&F new top made of 12mm thick commercial plywood, BWR grade, 7ply, type BB, of size 900x1950mm, fixed with appropriate size nut & bolts with double washers complete all as specified and shown on drawing.

TEAPOY VERANDAH FD-383, FD-255:-

Dismantling existing unserviceable top and S&F new top of 18mm thick prelaminated particle board, one side natural teak wook and other white(interior grade) of size 900x450mm including providing 4mm thick teak wood beading alround the top after french polished complete all as specifed and shown on drawing

S&F Gas welding to broken parts of frame throughout and grinding to smooth finish complete all as specified and directed. Note:- Welding alround shall be considered as one point.

M&L for Spray painting with one coat of synthetic enamel paint after preparation of steel surfaces by denting etc complete all as specified and directed

ALMIRAH LARGE STEEL FD-1031, FD-1033:-

Taking down old damaged legand S&F new leg made out of 1mm thick PBI sheet of size 450x100x100mm, made to shape including gas welding including one coat of primer complete all as specifed and shown on drawing

Re-setting of existing dislocated shelves by providing appropriate size clamps, nut and bolts of required numbers complete all as specifed and shown on drawing.

S&F in replacement brass lock, seven levers complete all as specified and shown on drawing.

S&F in replacement chromium plated steel handle,100 mm long complete all as specified and shown on drawing.

Preparation of existing painted steel surfaces (inside and outside) by carrying out denting,scraping old paint with sand paper, filling putty (where required) and applying one coat of synthetic enemel (olive green) paint with spray gun complete all as specified and directed .

ALMIRAH MED STEEL FD-1032, FD-1034:-

Taking down old damaged legand S&F new leg made out of 1mm thick PBI sheet of size 450x100x100mm, made to shape including gas welding including one coat of primer complete all as specifed and shown on drawing.

Re-setting of existing dislocated shelves by providing appropriate size clamps, nut and bolts of required numbers complete all as specifed and shown on drawing.

S&F in replacement brass lock, seven levers complete all as specified and shown on drawing.

S&F in replacement chromium plated steel handle,100 mm long complete all as specified and shown on drawing.

Preparation of existing painted steel surfaces (inside and outside) by carrying out denting,scraping old paint with sand paper, filling putty (where required) and applying one coat of synthetic enemel (olive green) paint with spray gun complete all as specified and directed .

TABLE OFFICE OFFICER STEEL (FD-1003):-

Dismantling existing unserviceable top and S&F new top of 18mm thick prelaminated particle board, one side natural teak wook and other commericial of size 1680x870mm including providing 4mm thick teak wood beading alround the top after french polished complete all as specifed and shown on drawing

Dismantling existing unserviceable drawer and S&F new drawer made out of 1 mm thick PBI sheet including one coat of red oxide primer complete all as specifed and shown on drawing.

S&F in replacement of brass lock to the table by appropriate size steel screws / rivets complete all as specified and directed

Dismantling unserviceable leg and S&F new leg made to shape, out of 25mm square tube having wall thickness1.6mm by gas welding complete all as specified and shown on drawing.

Removing old existing unserviceable leg shoes and S&F new PVC hard rubber shoes of approved quality to bottom of leg complete all as specified and directed

Preparation of existing painted steel surfaces (inside and outside) by carrying out denting,scraping old paint with sand paper, filling putty (where required) and applying one coat of synthetic enemel (olive green) paint with spray gun complete all as specified and directed .

TABLE 900X900X760 MM (FD-1009) :-

Dismantling existing unserviceable top and S&F new top of 18mm thick prelaminated particle board, one side natural teak wook and other commericial of size 900x900mm including providing 4mm thick teak wood beading alround the top after french polished complete all as specifed and shown on drawing

Dismantling unserviceable leg and S&F new leg made to shape, out of 25mm square tube having wall thickness1.6mm by gas welding complete all as specified and shown on drawing.

Removing old existing unserviceable leg shoes and S&F new PVC hard rubber shoes of approved quality to bottom of leg complete all as specified and directed

Preparation of existing painted steel surfaces (inside and outside) by carrying out denting,scraping old paint with sand paper, filling putty (where required) and applying one coat of synthetic enemel (olive green) paint with spray gun complete all as specified and directed .

CHAIR CB STEEL WITH/WITHOUT ARMS FD-75(M):-

S&F in replacement mild steel flat of size 20x5mm and 500mm long, under seat with gas welding to chair CB steel with arms (02 Nos in each chair) with one coat of red oxide primer complete all as specified and shown on drawing

S&F in replacement mild steel flat of size 20x5mm and 420mm long, under seat with gas welding to chair CB steel without arms (02 Nos in each chair) with one coat of red oxide primer complete all as specified and shown on drawing

S&F in replacement 2nd class seasoned hard wood as in seat frame of chair CB steel tubular with arms woven in Godrej pattern with 2mm wide plastic cane complete all as specified and shown on drawing

S&F in replacement 2nd class seasoned hard wood as in seat frame of chair CB steel tubular without arms woven in Godrej pattern with 2mm wide plastic cane complete all as specified and shown on drawing

S&F in replacement 2nd class seasoned hard wood as in back frame of chair CB steel tubular with arms woven in Godrej pattern with 2mm wide plastic cane complete all as specified and shown on drawing

S&F in replacement 2nd class seasoned hard wood as in back frame of chair CB steel tubular without arms woven in Godrej pattern with 2mm wide plastic cane complete all as specified and shown on drawing

S&F in replacement 2nd class seasoned hard wood as in arm rest of chair CB steel tubular with arms complete all as specified and shown on drawing

M&L for Spray painting with one coat of synthetic enamel paint to steel surfaces of chair CB steel after preparation of surface complete all as specified and directed

TABLE DINING ORs FD-165:-

Removing of old existing unserviceable top and S&F new table top of size 1900mmx565mm, made out of 18mm thick MDF board, commercial type,( ISI marked) duly covered with aluminium sheet 22 gauge, of required size complete all as specified and shown on drawing

Dismantling unserviceable leg and S&F new leg,760mm high, made to shape, out of 25mm square tube having wall thickness1.6mm by gas welding complete all as specified and shown on drawing.

M&L for Gas welding to broken parts of frame alround (wherever required) and grinding to smooth finish complete all as specified and directed. Note:- Welding alround shall be considered as one point.

Removing old existing unserviceable leg shoes and S&F new PVC hard rubber shoes of approved quality to bottom of leg complete all as specified and directed

M&L for Spray painting with one coat of synthetic enamel paint to steel surfaces of chair CB steel after preparation of surface complete all as specified and directed

TABLE BED SIDE STEEL DRG No HFD/2005:-

M&L for Gas welding to broken parts of frame alround (wherever required) and grinding to smooth finish complete all as specified and directed. Note:- Welding alround shall be considered as one point.

Dismantling existing unserviceable top and S&F new top of size 400mmx400mm, made of 18mm thick prelaminated particle board, one side natural teak wook and other commericial including providing 4mm thick teak wood beading alround the top after french polished complete all as specifed and shown on drawing

Preparation of existing painted steel surfaces (inside and outside) by carrying out denting,scraping old paint with sand paper, filling putty (where required) and applying one coat of synthetic enemel (olive green) paint with spray gun complete all as specified and directed .

FORM WITH BACK AND FORM WITHOUT BACK (FD-77):-

Dismantling existing unserviceable seat plank and S&F 25mm thick well seasoned sheesham wood seat plank in single piece, free from knots and cracks, of size 1800mmx225mm ,fixed with 09 Nos of GI nuts and bolts all as shown on drawing duly french polished after preparation of surface complete all as specified and directed .

Dismantling existing unserviceable back plank and S&F 19mm thick well seasoned sheesham wood back plank in single piece, free from knots and cracks, of size 1800mmx150mm ,fixed with 02 Nos of GI nuts and bolts all as shown on drawing duly french polished after preparation of surface complete all as specified and directed .

S&F in replacement 25mm square conduit having wall thickness16 gauge as in stiffener duly welded complete all as specifed and shown on drawing

M&L for Spray painting with one coat of synthetic enamel paint to steel surfaces of form with back after preparation of surface complete all as specified and directed

M&L for Spray painting with one coat of synthetic enamel paint to steel surfaces of form without back after preparation of surface complete all as specified and directed

CHAIR WRITING STEEL FD/E6/MAP/12 :-

Removing unserviceable cushion seat & back with upholestered tapestry cloth including PVC beading and providing New cushion seat & back of density 40mm with upholestered tapestry cloth not less than Rs 250 per meter including PVC beading and providing in serviceable condition duly repaired in all respect complete all as specifed and shown on drawing

S&F in replacement unserviceable arms handle black integral skin made of ply propylene ,co-polyme/ polyurethene with 75-56 share hardness complete all as specifed and shown on drawing

M&L for preparation of old painted surfaces and applying one coat of snythetic enamel paint (black colour) complete all as specified and directed

CHAIR REVOLVING STEEL WITH ARMS:-

Removing of unserviceable cushion seat, padded back with upholestered leather/tapestry cloth, padded cushion of arms and providing New cushion seat of density 40mm, padded back with upholestered leather/tapestry cloth, padded cushion of arms complete all as specifed and shown on drawing

M&L for replacement of unserviceable bearing of revolving chair as per existing complete all as specified and directed

M&L for replacement of unserviceable wheel of chair as per existing complete all as specified and directed

M&L for replacement of hydroulic fittings of chair as per existing complete all as specified and directed

M&L for replacement of base assembly of chair as per existing complete all as specified and directed

TABLE CENTRE BRASS FD-375 :-

Taking out old cracked/broken top and S&F new 12mm thick plate tinted glass top with corners rounded as shown drawings complete all as specified and directed .

M&L for Gas welding to broken parts of frame alround duly polished with brasso to smooth finish complete all as specified and directed. Note:- Welding alround shall be considered as one point.

CHARPOY FOLDING IP WITH HARD TOP FD-388 (R):-

Dismantling old unserviceable plywood top and S&F new 8mm thick,plywood top, BWR grade complete all as specifed and shown on drawing

M&L for Gas welding to broken parts of frame alround (wherever required) and grinding to smooth finish complete all as specified and directed. Note:- Welding alround shall be considered as one point.

Removing old existing unserviceable leg shoes and S&F new PVC hard rubber shoes of approved quality to bottom of leg complete all as specified and directed

M&L for Spray painting with one coat of synthetic enamel paint to steel surfaces after preparation of surface complete all as specified and directed Note :- A Sum of Rs. 13,112.66 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 23 & 24 (Schedule of credit) of Tender Documents.

B K CONTRACTORS