Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.3 LAccepted-AOC BLDG 9 FLAT 130 MIRA CO OP HOUSING SOCIETY LTD SALISBURY PARK GULTEKDI PUNE 411037 | PUNE | PUNE | MAHARASHTRA | 411037 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹35.1 L+₹82,564 (2.41%)Rejected-Finance N A | NA | NA | 121004 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹35.4 L+₹1.1 L (3.07%)Rejected-Finance N A | NA | NA | 121004 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹36.1 L+₹1.8 L (5.11%)Rejected-Finance 25 13 1 AMBEGAON PATHAR PUNE 411046 | PUNE | MAHARASHTRA | 411046 | L4 | Rejected-Finance Not Lowest |
Tender Value
₹41.9 L
EMD Value
₹83,840
Closing Date
30 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH PUNE
Garrison Engineer North General Cariappa Marg Camp Pune 411001
GE (N) P/TOKEN - 62 OF 2022-2023 PROVN OF CERTAIN SPL REP, RW AND MW WORKS IN THE AREA OF AGE B/R (CENTRAL) UNDER GE (N) PUNE
2022_MES_565487_2
GE (N) P/TOKEN- 62 OF 2022-2023
Open Tender
Civil Works
Item Rate
270 days
GE NORTH PUNE
Refer tender documents.
8 documents required · 8 mandatory
₹500
GE NORTH PUNE
₹83,840
Yes
1 Mar 2023
10 Jan 2023
6 Feb 2023
10 Jan 2023
30 Jan 2023
17 Jan 2023
11 Jan 2023 - 13 Jan 2023
Amount
Material and labour for roof tiles Mangalore pattern interlocking at side joints, laid dry including dismantling single layer Mangalore pattern or similar tiles in roofing and rubbish off the premises complete all as specified and as directed.
All as per serial item No.1.00 here-in-before but except tiles.
Dismantling battens for tiles, shingles etc. of any size including tiling fillets exceeding 15cmc/c complete all as specified and as directed.
Dismantling timber in scantling, fillets, rails, posts, rafters, purlins etc over 40 Sqcm in section in unframed work in any position complete all as specified and as directed.
Material and labour for 2nd class hard wood, clean sawn, in scantling timber work complete all as specified and as directed.
M&L AC Fiber Board Eaves/ Weather Boarding 18 to 20mm thick, complete approved arch pattern any size and shape all as specified and as directed.Make: Shera wall/Everest
Dismantling plain or corrugated steel sheeting , any gauge or any thickness, as in roof coverings complete all as specified and as directed.
Supply and fix for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed.
All as per serial item No.8.00 here-in-before but except sheeting.
Supply and fix in repairs 0.56mm thick plain, Aluminium sheeting, alloy 31000H4 in ridges, hips, valley gutter, crumple joint, drip and straight flashing (length and girth as fixed) complete all as specified and as directed.
M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in roof kerbs or mud stops rounded or chamfered on edges as in Coping complete all as specified and directed.
M&L 25 mm thick plain cement concrete (1:2:4), type B-O (using 12.5mm graded stone aggregate) as in sub base to receive tile/claddings tops including demolition of existing cement concrete complete all as specified and directed.
Dismantling of stone slabs, Kota stone, cudappah of any description or thickness in floor/fixed to walls, apron etc laid bedded and pointed in cement mortar complete all as specified and as directed.
Material and labour for machine cut cudappah stone slab 20-25 mm thick as in lintels, shelves, vertical surface, fixed with neat cement slurry or arldite, including rubbing and polishing complete all as specified and as directed
Material and labour for 18 to 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and any other platform like in cement mortar (1:4) over and including 10mm thick backing coat in cement mortar (1:3), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting, edge moulding, full curving the edges complete all as specified and as directed.
Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified and as directed.
M&L Brick work with fly ash bricks, conforming to IS- 12894:2002, Non modular, class designation 75, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc complete all as specified and as directed.
Demolition of brickwork built in cement mortar and rubbish off the premises complete all as specified and as directed.
M&L RCC (1:2:4) type B1 using 20 mm graded aggregate as in lintels, beams, cantilevers, bressummers/coping over 1.5 m span etc inluding weathring slightly rounded or chamferred angles complete all as specified and as directed. Note: Reinforcement shall be measured separately.
Mild steel 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.
S&F mild steel rolled section as in main cross beams purlins, rafters, frame and running rails fixed independently with angle iron cleats or connecting pieces conforming to Gde Fe-410-W, Gde E-250, quality A complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as specified and as directed.
Supply and fix for aluminium powder coated louvered ventilator with provision of space for exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and as directed. Jindal Section is as follows: Bottom – 20957, Top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.
Supply and fix for aluminium anodised powder coated three track sliding window with two glazed shutters, one shutter with and including 4mm thick ordinary quality float glass and one shutter with and including stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing, handle, locks, PVC rubber lining of transparent colour etc. complete all as specified and as directed. Catalouge numbers of Jindal company or equivalent make sections : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.
S&F for 5mm thick coloured Aluminium Composite Panel (Sheet) fixed with screws, cover joints filled with silicon and tape as in semi circular/ rectangular sunshade of windows, doors, gate etc or in wall cladding, fixed over frame to shape semi ciecular/ rectangular complete including taking down existing panel if required all as specified and as directed. Note : Frame work shall be measured and paid separately as supply and fix.
S&F for aluminium anodised framing of square hollow pipe complete all as specified and as directed.
S&F in repairs for 12mm thick toughened glass with etching as in openable door/ bathing cubical/ partition including chamfered edge polishing fixed with necessary Ozone path touch fittings and fixtures etc as per manufacturer's instructions complete all as specified and as directed.
S&F in repairs for 8mm thick toughened glass alongwith choice etching compete all as specified and as directed.
M&L for 15mm thick cement plaster in CM 1:6 on brick or concrete surfaces finished even and smooth as specified and directed.
Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.
Material and labour for false ceiling with made up of size 1800mm x 1200mm x 12.5mm thick, tapered edge gypsum board (Gypboard) Plain (conforming to IS 2095-Part 1:2011, Certified board) is then screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel EN-ISO 7049/50, Finish-Case hardened Grey Phosphating} at 230mm centres on ceiling section & 150mm at periphery of ceiling. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc Pro-Fill Jointing compound (Conforms to ASTM C475), Gyproc Joint Paper tape fixed on metal grid of hot dipped galvanized steel sections and suspended as per manufacturer's specifications and instructions including dismantling of ceiling board of any description and any thickness including cover fillets/ grid etc.complete all as specified and as directed. Make: Gyproc-Saint Gobain or equivalent of Armstrong, Diaken, New Age (ACE) as approved by GE.
Material and labour for plaster of paris decorative cornices/ moulding to the pattern as approved, cross sectional area exceeding 13 Sq.cm and not exceeding 25 Sq.cm and fixed in decorative pattern including preparation of surfaces and applying two coats of oil bound distemper over a coat of primer matching with the colour of ceiling including dismantling existing complete all as specified and as directed.
Material and labour for 12 to 12.50mm thick PVC laminated mineral board false ceiling board of size 600 mm x 600 mm on and including GI powder coated grid work with using 32mm x 23.5mm x 1.5 mm thick main tee, 23.5 mm x 23.5 mm x 1.28 mm cross tee and 23.5mm x 23.5mm x 1.5mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 605 mm x 605 mm including dismantling of ceiling board of any description and any thickness including cover fillets/ grid etc. complete all as specified and as directed. Make :- Armstrong, Diaken, New Age (ACE). Note: Height of ceiling is above 5 metres.
S&F in repair Vitreous china Urinal, full stall type, white with waste pipe and CP brass spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe including Cp Urinal spreader for fixing with 15 mm dia pipe complete all as specified.
Supply & Fix rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyethylene material which is duly stabilized with anti-oxident Plastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball (Minimum weight 210gms) and 20 mm bore brass stop cock, high pressure with crutch or butterfly handle etc complete including dismantling existing water tank all as specified and directed.
Material and labour for 18mm thick plywood, grade BWR, type BB, number of ply 9 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing plywood complete all as shown on drawing and as directed.
Material and labour for 12mm thick plywood, grade BWR, type BB, number of ply 7 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing plywood complete all as shown on drawing and as directed.
Material and labour for 6mm thick plywood, grade BWR, type BB, number of ply 5 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing plywood complete all as shown on drawing and as directed.
Material and labour for 1st class hard wood plain fillets, square, rectangular or triangular in section, bull-nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails or brads, sectional area exc 13 and not exc. 25Sq.cm complete all as specified and as directed.
Material and labour for 4mm thick one side decorative group match veneer complete all as specified and as directed.
Material and labour two or more coats of melamine polish with spray guns, compressor etc complete till fine glossy surface is obtained complete over wooden & wall panelling surfaceall as specified and as directed.
Taking down wall panelling including veneer, plywood & Batten complete all as specified and as directed.
S&F 1st class hardwood (teak wood) Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including taking down chowkats/frames and 02 coats of synthetic enamel paint over a coat of pink primer o two sides of chowkats and one coat of black bituminious paint on one side of chowkats complete.
Supply and fix for 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters complete all as specified and as directed
Material and labour for 0.90mm thick decorative laminate type 1 of surface finish, colour, pattern and size as approved, fixed with approved adhesive as per manufacturer’s instructions on horizontal and vertical surfaces etc. complete all as specified and as directed.
Material and labour for 0.90mm thick white laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer’s instruction complete all as specified and as directed.
Taking down shutters of any description, area exc. 1sqm n exc 2 sqm each complete all as specified and as directed.
Supply and fix for 75mm long 20mm flap width size butt hinges, extruded brass with mild steel hinge pin, bright polished and fixed type D-11 complete all as specified and as directed.
Supply and fix for 150mm size brass handles decorative type extruded, fabricated type, polished complete all as specified and as directed. Make- Godrej/Cuba
Supply and fix for 450mm size sliding channel, fabricated type, polished complete all as specified and as directed. Make- Godrej/Cuba
Supply and fix for 600mm size sliding channel, fabricated type, polished complete all as specified and as directed. Make- Godrej/Cuba
S&F Auto hinges, stainless steel, bright finish or electrogalvanised 30mm width of flaps
S&F, Magnetic catches of brass body and striking plate in complete all as specified and as directed. Make- Godrej/ Cuba
Material and labour for preparation of old treated plastered or unplastered surfaces of wall by removing all loose paints etc removing nails ,applying birla putty whereever required, smoothen the surface with sand paper and finally applying one coat of acrylic distemper complete all as specified and as directed.
Material and labour for appyling two coats of acrylic distemper of approved tint on ceiling surfaces complete all as specifie and as directed.
Material and labour for preparation of New plastered or unplastered surfaces of ceiling , applying birla putty whereever required, smoothen the surface with sand paper and finally applying two coat of acrylic distemper complete all as specified and as directed.
Material and labour for preparation of New plastered or unplastered surfaces of walls , applying birla putty whereever required, smoothen the surface with sand paper and finally applying one coat of acrylic distemper complete all as specified and as directed.
M&L for complete removal of existing treatment on walls using steel wire brush, sanding machine, rubbing ivory papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces plastered or unplastered surfaces ready to receive new finish complete all as specified and directed.
M&L for applying wall care putty 1 to 1.5 mm thick on walls surfaces.
M&L for applying one coat of alkali resistant priming paint on wall.
M&L for two coats of acrylic distemper of approved tint on wall surfaces
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.
M&L for 10mm thick wall cladding tiles n exc 0.18 sqm in size over 15mm thick backing coat in CM 1:4 all as specified and as directed
M&L for double charged vitrified ceremic tiles 10 mm thick (square/rectangular) polished, area of each tile exc. 0.42 sqm not exceeding 1 sqm, in flooring etc , laid over and including screed bed of 15 mm thick cement mortar (1:4) and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade complete all as specified and directed.
Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.06sq.m but not exceeding 0.11sq.m as in floor etc., colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.
M&L for coloured glazed ceramic tiles of size 600mm x 300mm x 7 to 8mm thick highlighter tiles of colour and pattern as approved by GE, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick screed bed in cement mortar 1:3 including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premisescomplete all as specified & directed.
M&L for coloured glazed ceramic tiles of size 600mm x 300mm x 7 to 8mm thick of colour and pattern as approved by GE, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick screed bed in cement mortar 1:3 including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premisescomplete all as specified & directed.
M&L for 25mm thick coloured glossy rubber moulded chequered cement concrete tiles of area exc. 0.08 Sqm and n.exc 0.16sqm each, set, jointed and pointed in net cement slurry mixed with grey cement and pigment in floors including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and as directed.
Supply and fix for 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, ISI marked, complete all as specified and as directed.
Supply and fix for 300mm long brass sliding door bolts with sand or die cast brass hasp, staple (bolt type) and fixing bolt with roller or drawn brass bolts, ISI marked, complete all as specified and as directed.
Supply and fix for 200mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed.
Supply and fix for 150 mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed.
Supply and fix for butt hinges, 100mm size, mild steel cold rolled, medium weight complete all as specified and as directed.
Supply and fix for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 150mm all as specified and as directed.
Supply and fix for 100mm size brass handles, extruded, fabricated type, polished complete all as specified and as directed.
Supply and fix for 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.
Supply and fix in repairs for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed
Supply and fix in repairs for vitreous china coloured wash down water closet (pedestal pattern) cascade type ‘P’ trap or 'S' trap, in built seat cover and flushing cistern, low level, valveless, symphonic action type complete with inlet ball valve, float and handle complete all as specified and as directed. Make :- Hindware , catalogue No. 20028 Constellation, 21038 cistern, pastel (complete set) or equivalent from Cera/ Parryware. Note :- If Cat No. is revised, equivalent cat No. from latest catlauge shall be considered.
S&F in repairs Chromium plated single lever extended basin mixer (height 150 mm) without popup waste system with 450mm long braided hoses as per Cat No FUS- 29005NB of make Jaquar 'FUSION' series or equivalent of makes asper Appx 'A' as approved by GE complete all as specified and as directed.
Taking up or down 15 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as directed.
Taking up or down 20 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as directed.
Supply and fix for 15 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.
Supply and fix for 20 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.
S&F in repairs brass chromium plated quarter turn two way bib cock with wall flange 15mm dia Cat No. FUS-29041 of make Jaquar ‘FUSION series or equivalent as per Appx 'A' as approved by GE complete all as specified and as directed.
S&F in repairs chromium plated toilet paper holder ,Cat No. AKP-35751 of make Jaquar ‘‘KUBIX PRIME" Series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.
S&F in repairs chromium plated soap dish ,Cat No. AKP-35731P of make Jaquar ‘KUBIX PRIME'S Series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.
S&F in repair white table top Basin of size 450mm x 300mm x 105 mm fixed in position including fixing of tap, waste pipe etc complete Make: hindware Model Kathy mini Cat Part No – 91059 or of equivalent make as per Appx 'A' as approved by GE.
S&F stainless steel health faucet witrh 1 Mtr tube and hook complete all as specified and directed ny Engr-in-charge. Confirming to Cat part No ALD573 of jaguar completed all as specified
S&F in repairs chrome plated towel ring square with round flange, Cat No. CAN-1121N of make Jaquar ‘CONTINENTAL'S COLLECTION' Series or equivalent as approved by GE all as specified and as directed.
M&L for GI tubing 15mm dia medium grade with all fittings & fixtures complete laid in trenches fixed in repairs
M&L for GI tubing 20mm dia medium grade with all fittings & fixtures complete laid in trenches fixed in repairs
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall fixed complete all as specified and directed
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and directed
S&F PVC (SWR) bends, 75 mm bore, any radius with access door complete all as specified and directed.
S&F PVC (SWR) bends, 110 mm bore, any radius with access door complete all as specified and directed.
S&F PVC (SWR) Junction, single, (single T) equal or unequal, 110 mm bore,with access door complete all as specified and directed.
M&L for PVC (SWR) vent cowl, 110 mm bore complete all as specified and directed.
S/F in repair 75 mm bore PVC (SWR) floor trap plain with grating incl jointing with solvent cement
M&L for old plaster/ unplaster surface and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) roof/ wall /floor etc, over a coat of primer complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint.
M&L 10 to 12 mm thick green marble (table rubbed and polished) as in border, floors, staircase (Round/ square/ rectangular or any other shape) etc.complete laid over cement slurry jointed with grey cement slurry mixed with pigment to match the shade of slab over and including 10mm thick rendering in cement mortar 1:3 including dismantling of existing stone slabs/ tiles of any description or thickness laid bedded and pointed in cement mortar and removing rubbish off the premises complete all as specified and as directed.
M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in foundations, mass concrete, sub base complete all as specified and direceted
Demolition of cement concrete in ground floors , pavings, sunken floor etc (below or above ground level)
Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated Mangalore Tile Pattern steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete (Corrugated, Semi corrugated etc.) sheets all as specified and as directed. Note- The Shed to be made in rectangular/ Circular hut shaped)
Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete all as specified and as directed.
M&L for coloured tiles 300mm x 300mm x 10mm thick of make "Johnson Endura" or equivalent of Kajaria as approved by GE, laid over and including 20mm thick screed bed in cement mortar 1:4, jointed complete all as specified and as directed.
Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
Dismantling of structural steel work of any description
M&L for mild steel framed work such as grill, gate etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.
S & F of mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS1161-1998 grade ST.-240,as in main cross beams, Frame, Purlins and running rails fixed independently with angle iron cleats or connecting pieces complete all as specified and directed.
M&L for preparation of New steel surfaces of any description over 10cm girth or width and applying redoxide primer and two coat of synthetic enamel paint all as specified and directed.
M&L for preparation of surface by scraping old finish, providing POP and smoothen the surface by sand paper, applying one coat of primer, two coats of base paint & Finally applying Texture paint all as specified and directed.
Supply and fix in repair for polycarbonate fibre glass reinforced translucent corrugated/ Plain sheeting 6.00 mm thick hollow section fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soils.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in hard/dense soils.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soils
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, in soils.
Removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point.
S&F for Angle iron posts, Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc
S&F for Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long, not exc 12mm dia of neck bolts
M&L for cement concrete 1:2:4 Type B1 in bed block, lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles including necessary form work, as directed by Engr-in-Charge
M&L for Hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and direceted
M&L for 75 mm thick Cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in sub-base complete all as specified and direceted
Machine pressed precast coloured glossy rubber moulded concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness,of M-40 Grade including 30 mm thick sand bedding layer for laying interlocking tiles..
M&L for Preparation of new plastered surfaces and applying three coats of white wash on walls complete all as specified and direceted
M&L for preparation of new plastered or unplastered surfaces and applying two coats of cement base paint over a coat of primer as specified and directed.
M&L for plain cement concrete (1:2:4) type B-1, (using 20mm graded stone aggregate) as in coping and similar work with & including necessary form work to receive fair finish complete all as specified and direceted
M&L TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed
M&L mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete all as specified(grade Fe-410-w (Gde E-250) quality-A) complete all as specified and directed.
S&F Mild steel, 1.25mm thickness plain black sheet in wall cladding steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc as required complete all as specified and directed.
M&L 75mm thick Cement concrete flooring type B-2 (1:2:4) (40mm graded aggregate) as in floor all as specified and directed.
M&L 40mm thick Cement concrete flooring type B-1, (1:2:4) (20mm graded aggregate) as in floor all as specified and directed.
M&L 75mm thick Cement concrete flooring type D-2 (1:4:8)(40mm graded aggregate) as in floor all as specified and directed.
M&L machine pressed precast cement concrete coloured glossy interlocking tiles, paver blocks, any shape and size as approved, 60mm thick, confirming to IS 15658-2006, M-35 grade in floor/pavement laid over and including 30mm thick sand cushioning laid dry to the profile all as directed by Engineer-in-Charge.
Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit including all accessories after chasing in walls etc with Metal flush box of suitable module, with earth dolly, covered with modular white cover plate & frame for modular switches, sockets, regulators etc including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following
(a)One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed
(b) One light point controlled by controlled by one, one way switch 6 Amps with additional one light points on the same switch circuit complete all as specified and as directed
(c) One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed
(d) One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed
Description all as per 1 here-in before but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point,16 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed
Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC casing caping including all accessories after fixing on surface of walls /ceilings etc with Metal flush box of suitable module, with earth dolly, covered with modular white cover plate & frame for modular switches, sockets, regulators etc including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following
(a) One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed
(b) One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed
(c) One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed
Supply and fixing Modular Switch - 6 Amps, Single pole one way, one module complete all as specified and as directed.
Supply and fixing Modular Switch - 16AX 1 Way switch with indicator one module Make Havells Cat No AHCSXIG161” complete all as specified and as directed.
S & F Modular socket outlet multipurpose 6 Amps, 5 pin, 2 module, complete all as specified and as directed.
S & F Modular socket outlet multipurpose 6/16 Amps shuttered type, 2 module Make Havells Cat No AHLKCXG133, complete all as specified and as directed.
S & F Ceiling rose, 3 phase / PVC / polycarbonate, complete all as specified and as directed
Supply and fixing Double USB Charger 2 M 2400 mA complete all as specified and as directed. Make Legrand cat No 5734 22 or Equivalent in Havells Cat No AHLKGXW002
Supply and fixing die cast aluminium housing , opal white PC diffuser, With E27 cap, IP 54 rated LED bulk head fitting suitable for 10 Watt LED lamp including lamp complete all as specified and as directed
Supply and fixing Recess-mounted, COB based LED downlight with clear glass 30 Watt including lamp complete all as specified and as directed. Make Jaquar Cat No-LERS05R020XW
Supply and fixing 22 Watt Inverter LED Batten with Opal Diffuser, IP20, Battery back-up & Functioning as per Product TDS with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. Make Halonix Cat No LED INVERTER BATTEN HLB-08-22-CW-INV or equivalent in Havells, LHEXACP7FNIW020
Supply and fixing LED , White/ warm white, Wattage: 7 watts, Power Requirement: 220-240 V, Make- Philips Cat No 31402, Picture light, complete with all accessories prewired including provision of flexible copper conductor cable of suitable size from ceiling rose to connector complete all as specified and as directed.
Supply and fixing Energy Efficient BLDC Motor, wall mounted fan , Power-32 W consumption on high speed, Input voltage 90-245 V-AC single phase, Speed: 1350 RPM ,50 Hz , 400 mm sweep, 3 blade, and making connections complete all as specified & as directed. Make- Atomberg (EFFICIO +)
Supply and fix exhaust fan, AC single Phase, working on input voltage 140-285 , of size 250m sweep, 1300 RPM, Power 20 W with BLDC Motor, blades, frame and louvers provision of 3 core 1.5 sq. mm copper conductor PVC insulated & PVC sheeted flexible wire from ceiling rose/connector to fan including making connections complete all as specified & as directed . Make- Atomberg (EFFICIO) , Orient, Bajaj
Supply and fix exhaust fan, AC single Phase, working on input voltage 140-285 , of size 200m sweep, 1600 RPM, Power 16 W with BLDC Motor, blades, frame and louvers provision of 3 core 1.5 sq. mm copper conductor PVC insulated & PVC sheeted flexible wire from ceiling rose/connector to fan including making connections complete all as specified & as directed .Make- Atomberg (EFFICIO) , Orient, Bajaj
S & F Distribution Board sheet metal enclosure Double door type TPN 4 Way, 415 volts, 50 Hz, suitable for Flush Mounting and surface Mounting & provision for FP MCB / Isolator / RCCB / RCBO as incomer and SP/TP MCB's as outgoing , With 100 A Copper Busbar for each phase, With 2 Neutral bar, 2 Earthbar and Cable ties for cable management, Fully insulated busbar & shrouded Neutral bars IP 43 - #IK 09 with metal door including necessary cement work and electrical connections complete all as specified and as directed. Make L & T, Legrand Schneider
S & F Distribution Board sheet metal enclosure Double door type TPN 4 Way, 415 volts, 50 Hz, suitable for Flush Mounting and surface Mounting & provision for FP MCB / Isolator / RCCB / RCBO as incomer and SP/TP MCB's as outgoing , With 100 A Copper Busbar for each phase, With 2 Neutral bar, 2 Earthbar and Cable ties for cable management, Fully insulated busbar & shrouded Neutral bars IP 43 - #IK 09 with metal door including necessary cement work and electrical connections complete all as specified and as directed. Make L & T, Legrand Schneider
Supply and fixing amp rating 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN 40 To 100 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning
S & F PVC rigid non-metallic conduit ISI marked of dia 20 mm dia inclusive of all tees, bends, elbows reducers, junction box etc and fixing accessories such as couplers, lock nuts, saddles, etc for telephone cable , TV cable and public address system including where required all as directed by Engineer-in- Charge duly concealed in wall complete all as specified and as directed
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
Supply and fix ready made outdoor type heavy duty polymer earth pit chamber box of inner size 300mmx300mmx260 mm with provision of entry glands for earthing strip/ GI pipe and cover complete all as specified and as directed by Engineer-in-Charge. (Note sample is kept in GE Ofiice sample room)
M&L for Maintenance Free Grounding Solution set earthing comprising of High tensile low carbon steel rod of 3 Mts length & 17.2 mm dia with 250micron (average) molecularly bonded copper on the outer surface along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. Back-fill compound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground including taking out existing earthing complete all as specified and as directed. Make: JEF Technology or equivalant in True power earthings/Excel fibrotech NOTE :- (a) Rates for Excavation and earthwork in any type of soil/strata, testing on completion, Copper strip 20x3 mm and 40 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. (b) On testing, after completion, if the earth resistance < 3 ohms is not obtained, earthing will be rejuvenated at no extra cost till the desired earth resistance is obtained. (c) Test certificate from the OEM has to be produced by the contractor for the material used in earthing
Supply , Install and testing Plastic body, Floor standing , Approx coverage Area- 146.34 Sqm, colour (Off White/ white) capacity 4 Ton Tower AC, Power 5950 Watt, 3- Phase, 50 Hz , Voltage rating - 415 Volts of ( Make Voltas . Model- 48 CZMM) with following Features Air Flow volume- 1000 CFM Cooling Capacity- 14000 Watts Cooling Power Input- 5950 Watts Running Current (Cooling/Heating) - 10.9 Amps Functions - Compressor Type- Twin rotatry type Refrigerant Type- R-32 Noise Level Indoor Unit- Less Than 55 dB 360 Degree Air Flow Type Physical Attributes (i) Condenser/ Evaporator Coil type- copper , (ii) Left/ right Louvers Swing Type IR Remote Control type,
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 7.5 KVA
S & F submain wiring with four single core (FRLSH) PVC insulated unsheathed multistranded flexible copper conductor cable, of 10.0 Sqmm and Two single core 10.0 Sqmm flame retardent low smoke (FRLSH) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 , providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures drawn through including PVC conduit and conduit accessories heavy duty ISI marked on surface/ cable tray etc complete all as specified and as directed.. Note ( Six runs of main copper wire, & PVC conduit shall be measured together as one length). .
Supply and fixing amp rating 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN 63 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning
Supplied & fixed sheet metal enclosures with socket plug top and Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB MCB 32 amp, 415 Volts complete all as specified and as directed.
Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.
M/S - R K CONSTRUCTIONS
J P ASSOCIATES
Sai Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .