Provision of 02 nos. sign boards and 08 nos. security posts with traffic mirrors at Jagruti Vihar and Anand Vihar, MCL HQ, Burla, Sambalpur.

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 3 mm thick aluminium ACP sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D- 4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre....

...all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in- charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage.

Providing and erecting portable cabin for Security post having internal size of 1830mm x 1830mm x 2135 mm with 32 mm thick water proof flush door shutter with 40+/- 2mm door panel, 2 Nos. Powder coated anodized Aluminium sliding window of size 900 mm x 900 mm with 4 mm thick tinted glass safety grills of MS square bar of 8 mm having equal spacing of 125 mm, canopy for door and window. The door shutter have 2 nos. 200x16mm SS 304 Aldrop, requisite nos of 100 mm SS 304 hinges, 125mm SS304 tower bolt, 200mm SS304 latch for door handle, roof slope 1:2 one way and roof frame made of MS stiffner 40mm x20mm x3.20mm. Pannelling material of 1.25 mm thick corrugated HR sheeting for roof and side wall as well as for canopy,.....

....Insulation material for side and end wall shall be of 50 mm glass wool and 75 mm glass wool for roof beneath 8mm thick prelaminated board, Understructure/ base shall be made of MS pipe 50 mm x 50mm x1.2mm thick for vertical and beside centre block and outer ride with 25 mm x 25mm x2mm thick MS pipe. The colour finish of the cabin shall be chorinated rubber paint of 50 microns in top and outer paint shall be as per manufacturer. The cabin shall be structurally stable against the wind of 55m/s in siesmic zone V and ambient temp range (-)40 deg C to (+) 50 deg C, 1M snow load standing on roof. In Cabin provision of 3 core insulated underground cable covered with MS pipe from the power supply point provided by deptt, suitable for 415 V 50Hz for distribution supply for various appliances)

Providing and grouting stainless steel (Grade- 304) hollow section round/ square tubes for hanging traffic mirror excluding cost of earthwork and concrete

Providing and fixing Convex mirror of 800 mm dia i/c pole mounting bracket for fixing the mirror on stainless steel pipe (excluding cost of pipe) but inclusive of mirror hood. (The viewing distance upto 08 to 11.00 mtr)

Total impact of GST for the purpose of CTC

HIMANSHU CONSTRUCTIONS

r k construction