SPECIAL REPAIRS TO TOILETS, SANITARY FITTINGS, TILING, FLOORING, PROVISION OF GEYSERS, SINKS, WASH BASIN, S/S UTENSIL RACKS AND PARKING SHEDS IN SMQs/OMQs AT AF STN PURNEA UNDER GE (AF) PURNEA

Amount

Taking down cement plaster on walls, including racking out joints, hacking for key, scrubbing down with water etc. and remove rubbish from site of work complete all as specified & as diretced.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified & as diretced.

M & L for rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 finished even and fair without using extra cement complete all as specified & as diretced.

M & L for rendering 5mm thick on fair faces of ceiling concrete surface in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified & as diretced.

M & L for preparation of new wall surfaces and applying two coats of oil emulsion distemper over a coat of primer and including 3mm thick wall care putty on wall, complete all as specified & as diretced.

M & L for preparation of old wall surfaces and including complete removal of all existing treatement, washing rubbing down and applying two coats of oil emulsion distemper over a coat of primer complete all as specified & as diretced.

M&L for preperation of new plastered surfaces and applying two coats of cement base paint including priming plastered and other surfaces with one coat of alkali resistant priming paint complete all as specified and as directed.

M&L for preperation of old plastered surfaces and applying two coats of cement base paint including priming plastered and other surfaces with one coat of alkali resistant priming paint complete all as specified and as directed.

M&L for preparation surfaces of new ceiling surfaces and applying three coats of white wash complete all as specified & as diretced.

M&L for preparation surfaces of old ceiling surfaces and applying three coats of white wash complete all as specified & as diretced.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6, type C-2 (40mm graded stone aggregate) as in plinth protection/pavings including finishing surface without using extra cement, complete all as specified and as directed.

M&L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate ) as in sub-base complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B0 (using 12.50 mm graded crushed stone aggregate) finished even and rough as in sub floor/levelling course to recieve floor finishes complete all as specified and as directed.(Window cill)

M&L Non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry with tiles adhesive as per manufacturer instruction and pointed in white or coloured cement to match and including screed bed or bedding layer of mortor 15mm thick in cement mortar 1:6 for laying on floor finishing complete all as specified and as directed.

M& L glazed ceramic tiles (coloured) of area exc 300x200x7mm thick as in vertical surfaces as in skirting/dado with tiles adhesive as per manufacturer instruction, set and jointed in neat cement slurry and poited in coloured cement to match confirming to IS-13712 Z (b) (iii) over and including rendering 10mm thick of cement plaster in cement mortar (1:4) for backing of tiles complete all as specified and as directed.

M&L coloured vitrified ceramic tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortor 15mm thick in cement mortar 1:4 for laying on floor finishing complete all as specified and as directed.

All as per serial item No. 18 here-in-before but as in verticle surfaces such as skirting/dado laid over 10 mm thick cement plastering in CM 1:4 on brick or concrete surface complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for re fixing bore of pipe 15 mm, complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for re fixing bore of pipe 20 mm, complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for re fixing bore of pipe 25 mm, complete all as specified and as directed.

Material and labour for fixing of GI tube medium grade 15 mm bore with all fittings as required at site and fixed to walls and ceiling or laid on floor including connecting with existing lines complete all as specified and as directed.

Material and labour for fixing of GI tube medium grade 20 mm bore with all fittings as required at site and fixed to walls and ceiling or laid on floor including connecting with existing lines complete all as specified and as directed.

Material and labour for fixing of GI tube medium grade 25 mm bore with all fittings as required at site and fixed to walls and ceiling or laid on floor including connecting with existing lines complete all as specified and as directed.

Material and labour for fixing GM globe/gate valve 20mm bore with iron wheel head, screwed both ends for iron pipes, ISI marked, conf to IS including taking down old unserviceable ones, complete all as specified and as directed. Note: Union or long screw have to provided before fixing of gate valve if required rate shall be deemed to be inclusive in the quoted rates.

Material and labour for fixing GM globe/gate valve 25mm bore with iron wheel head, screwed both ends for iron pipes, ISI marked, conf to IS including taking down old unserviceable ones, complete all as specified and as directed. Note: Union or long screw have to provided before fixing of gate valve if required rate shall be deemed to be inclusive in the quoted rates.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor with concrete including trap set complete all as specified and as directed.

S&F in repairs vitreous China wash down water closet pan ( pedestal pattern) , white, including providing of plastic seat cover for pedestal pan, back, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device ( excluding fixing bolts, flushing cistern and flush pipe) etc complete all as specified and as directed.

S & F PVC valveless, syphonic action type low level flushing cistern 10 ltrs capacity white with intel ball value, float valve and handle incl brackets, PVC flush pipe complete all as specified and as directed.

Supply and fixing in repairs vitreous China wash basin, white, flat back, size 550 x 400mm including 32mm dia waste coupling CP, with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed and brackets including cutting for and pinning in ends of brackets or errecting stand etc. and including PVC waste pipe fitted with CP coupling for required length, complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm long etc, complete all as specified and as directed.

S&F in repairs 110 mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall, including necessay clamp to be provide for fixing of PVC SWR pipes, complete all as spcified and as directed.

S&F in repairs 75 mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall, including necessay clamp to be provide for fixing of PVC SWR pipes, complete all as spcified and as directed.

S&F PVC (SWR)75mm bend bore bends with access door any radius, complete all as spcified and as directed.

S&F PVC (SWR)110 mm bend bore bends with access door any radius, complete all as spcified and as directed.

S&F 110mm PVC (SWR) branch piece single (single Y) equal or unequal with access door, complete all as spcified and as directed.

S&F 110mm PVC (SWR) junction single (single T) equal or unequal with access door, complete all as spcified and as directed.

S&F in repairs fancy type with wall flange bib taps long body, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, & fixed, complete all as specified and as directed.

S&F in repairs stop valves 15mm dia, cast copper alloy chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, but fancy type, chromium plated with long shank and cup (concealed type), complete all as specified and as directed.

S&F in repairs pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore and fixed, complete all as specified and as directed.

S&F in repairs fancy type with wall flange two way bib taps, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, & fixed, complete all as specified and as directed.

S&F in repairs of CP 2 in 1 health faucet with 1 mtr tube & hook (hand shower) chromium plated, complete all as specified and as directed.

S&F in repair of liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 105gms), complete all as specified and as directed.

S&F in repairs of towel ring (round) of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms), complete all as specified and as directed.

S&F in repairs of swivel shower of PTMT 15mm any colour for fixing with 15mm pipe (Minimum weight 40gms), complete all as specified and as directed.

S&F in repair of shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour (Minimum weight 40gms), complete all as specified and as directed.

S&F in repair of towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms), complete all as specified and as directed.

S&F in repairs of waste filtting (coupling), brass chromium plated for 32mm dia glazed ware sink , basin, urinal etc. with long screwed shanks and fly nuts flazed ends bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repairs PVC (SWR) multi floor trap with grating including jointing with solvent cement with outlet of 75mm, complete all as specified and as directed.

S&F in repairs fancy type tubular towel rail brass, 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated including brackets, brass screws and wooden/ plastic cleats complete all as specified and as directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and as directed.

S&F in repair PVC waste pipe for WHB and basin 32mm dia of length 800mm PTMT complete all as specified and as directed.

S&F in repair PVC waste pipe for urinal/kitchen sink 38/40mm dia of length 800mm PTMT complete all as specified and as directed.

S&F in repairs vitreous China Urinal, Half stall type, white, with PTMT spreader including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as spcified and as directed.

Dismantling water tank any type and any position from site of capacity exc 250 litres and n exc 500 litres, complete all as specified and as directed.

Dismantling water tank any type and any position from site of capacity exc 500 litres and n exc 1000 litres, complete all as specified and as directed.

S&F 500 litres Rotational moulded polyethylene water storage tanks double layer (Cylinderical veertical with closed top) hoisted and fixed in position all as specified in SSR Part-I and including fixing of 20 mm PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and including all accessories of fittings for tank fixed, complete all as specified and as directed.

S&F 1000 litres Rotational moulded polyethylene water storage tanks double layer (Cylinderical veertical with closed top) hoisted and fixed in position all as specified in SSR Part-I and including fixing of 20 mm PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and including all accessories of fittings for tank fixed, complete all as specified and as directed.

S&F in repairs sheet glass shelf assembly consisiting of 5.5 mm thick sheet glass shelf 12mm wide with CP brass bracket guard railing 60cm long complete all as specified and as directed.

S&F in repair brass CP wall mixer with telephone shower arrangement, connecting legs & wall flanges but without crutch & telephone shower for mixing hot and cold water for wall screwed down for iron pipe and fixed, any type including all necessary fittings complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n.exc 1.50sqm each and removing from site and making good disturbed surfaces of wall in CM (1:3) complete all as specified and as directed.

Taking down chowkhats or frames with shutters(without taking off shutters from the frames) exc 1.50 sqm & n.exc 4.00sqm each and removing from site and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and directed.

S&F for pressed steel frames size of 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S&F of factory made plain framed pannelled door shutters 35mm thick (two layer panel) with lock rail and panel of 9mm BWP commercial ply or 12mm verneering on both faces. The size of rail and stile as per IS-1003, SSR Pt-I kiln seasoned and chemically treated complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer including preparation of new wood and wood based surface, over 10cm width or girth complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixing in opening as per specification and all as per drawing, complete all as specifed and as directed

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F 250mm size aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

S&F 100mm size butt hinges, heavy weight, cold rolled mild steel to wooden or steel frame including necessary screw/bolt/welding complete all as specified and as directed.

S&F 150mm size and aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 125mm size aluminium handles, cast type, anodised complete all as specified and as directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood thrusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290

S&F Steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F for 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm each pane complete all as specified and as directed.

S&F Galvanised mild steel wire cloth,0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples for wooden/steel frame, complete all as specified and as directed.

S&F for framed work such as grills, grating, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways railing framework of water tank and siliar work complete all as specified and as directed.

M&L for preparation of new or previously untraeted steel surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar above or below GL or in any other condition, complete all as specified and as directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc. 6m mean radius in CM 1:6 using old size brick, complete all as specified and as directed.

M&L cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 for concealed GI Tubing, complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm long etc, complete all as specified and as directed.

S&F stop valves 15mm dia, cast copper alloy chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, but fancy type, chromium plated with long shank and cup (concealed type), complete all as specified and as directed.

S&F fancy type with wall flange bib taps long body, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, & fixed, complete all as specified and as directed.

S&F pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore and fixed, complete all as specified and as directed.

S&F 75 mm dia PVC SWR pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as spcified and as directed.

Surface excavation in soft/loose soil n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for pipe line or for manholes not exc 10 Sqm on plan and not exc 1.5m in depth in any type of soil and getting out, complete all as specified and as directed.

Excavating post holes or similar holes, each not exveeding 0.5 Cum, getting out in Soft/Loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 M and making good surface, complete all as specified and as directed.

M&L moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and as directed.

M&L Hardcore of gauge exc 63mm but n.exc 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as spceified and as directed.

M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) as in foundations, filling and mass concrete, complete all as spceified and as directed.

M&L for Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded granite stone aggregate) as in foundations, filling and mass concrete, complete all as spceified and as directed.

S&F MS steel work in tubular trusses and tubular posts including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as spceified and as directed.

S&F Rolled Mild steel Plates (plain or Chequred) channels, square cut or notched, forming holes, with riveted, bolted or welded attachment confirming to Fe 410 - O or Fe 310 - O, complete all as spceified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

S&F in repairs harrison curtain rails of 25mm dia, anodised aluminium alloy, chromium plated with fixing brackets (Fancy type) with stops, rollers etc. complete all as specified and as directed.

M&L for 1st class hard wood plain, solid, straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

M&L for 18/19mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination & other side balancing with lamination,fixed wih screws to timber frame work/wall for shutter and pelmet, complete all as specified and as directed.

S&F 1st class hardwood wooden beads straight (any size ) for gauzed joinery including mitres and removing old beads after tightening & nailing of wire mesh including two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

S&F continuous (Piano) hinges mild steel bright finish or electro galvanized of 30mm width of flaps (when opened) complete all as specified and as directed.

S&F Hasp and staple size of 100 mm, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and as directed.

S&F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel brass polished, bright finished, complete all as specified and as directed.

S&F stainless steel kitchen plate rack made of 1.00 mm thick sheet of size 750x600x250mm incl shelves, rod to put plates etc and fixed to wall with nut, screw and washer of mild steel chromium plated polished, bright finished on wall, complete all as specified and as directed.

M&L for point wiring concealead with suitable pvc conduit of 1.5 sqmm size single core multi stranded copper conductor unsheathed PVC insualted 1100 V grade FRLSH cable drawn into and including PVC conduit adequate width and length with accessoris and fittings like bend, elebows, crosses wall crossing etc for one light /fan point controlled by one switch including shunken type pressed steel box width 3 mm thick plastic laminated sheet top cover of approved make for housing switches, sockets outlet and regulators etc and with continuous 1 No cable 1.5 sqmm copper conductor PVC insualted, unsheathed as earth wire connected to earth dolly and to be connected boxes of suitable sizes for mounting to fittings etc, complete all as specified and as directed.

All as per item No 107 here-in -before but 1.5 sqmm copper conductor for 3 pin 5 Amps socket outlet independent but below the switch board of light points in the same vertical plane controlled by one switch with one No earth continuity copper conductor of size 1.5 sqmm complete all as specified and as directed.

All as per item No 107 here-in -before but 4.0 sqmm copper conductor for 3 pin 15 Amps socket outlet independent but below the switch board of light points in the same vertical plane controlled by one switch with one No earth continuity copper conductor of size 4.0 sqmm. complete all as specified and as directed.

Supply and fix switch switch socket combination 2 in 1, 2/3 pin, 5 Amp, 240 volts, complete all as specified and as directed.

Supply and fix switch switch socket combination, 3 pin, 6/15 Amp, flush type, 240 volts, complete all as specified and as directed.

Supply and fix switch piano, flush type, single pole, one way 5 Amp complete all as specified and as directed.

S&F ceiling rose surface bakelite 65 mm dia three terminal PVC/Polycarboante isolated body, complete all as specified and as directed.

S & F sheet metal enclosure MCB, DB, SPN, 240 Volts, 200 Amps rated copper bus bar, confirming to IS as per IEC 61439-3, 8 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including fixing the DB box flush in wall of any type and making good the distrubed surface to match as the existing wall, complete all as specified and as directed.

S&F MCB SPN 240 volts 40 Amps, 10 KA breaking capacity, 'C' Curve including connection with suitable size copper lugs complete all as specified and as directed.

S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'C' Curve including connection with suitable size copper lugs complete all as specified and as directed.

M&L for concealed sub main wiring with two single core PVC insulated unsheathed cable 1100 volts grade, 4.0 Sqmm size with multistranded copper conductor FRLSH cable (with colour code), drawn through and including PVC non-metalic conduit of suitable size, medium grade (ISI marked) with all fittings and fixing accessories as approved by EIC, including PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete all as specified and as directed. Note : Three run of 4.0 Sqmm cable and one run of PVC conduit in wall/ceiling shall be measured as unit length.

S&F in replacement of tube light fittings 1x20 watt, LED 230 Volts integrated batten T-5 indoor decorative aluminium extendedm energy efficient including tibe rod 20 watt, complete fixing on wall/ceiling & internally pre-wired, complete all as specified and as directed. Make :- Philips cat No BN021CLED20SPSUCWGRS2

Supply and fixing exhaust fans heavy duty turboforce, AC single phase 230/240V, 50Hz of size 300mm sweep with louver and make holes of suitable size as per exhaust fan & matching the exsisting surfaces, complete all as specified and as directed.

Supply and fixing electric water heater storage type of capacity 25 ltrs, BEE 5 star rated and including fixing of geyser with suitable fastener, complete all as specified and as directed.

S&F single pole and neutral enclosure with two pin and earth, plug and socket , suitable for single phase 240 V, complete with one single pole MCB of capacity 20 amps having `C` charactristic, breaking capacity 10 KA, including industial plug top, complete all as specified and as directed.

Supply and fixing hot/cold water steel armoured heavy duty connection pipe suitable for hot/cold water of size 15mm dia with PTMT nuts of length 600mm with steel reinforced, complete all as specified and as directed. Note:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quoted amount.

M/s.Keshab Chandra Ghosh

M/S SATISH KUMAR SINGH & SONS

ALAM ENTERPRISES