8729/GWL/E8 REPAIR/ MAINTENANCE OF DIFFERENT ARTICLES OF STEEL AND WOODEN FURNITURE INCLUDING PAINTING AND POLISHING AT MIL STN UNDER GE GWALIOR

Amount

BED PLY WOOD TOP (HARD BED) : FD-246

Dismantling, taking out carefully old existing ply wood of any description and replacement of the same with S&F new ply wood 12mm thick plywood commercial ISI marked BWR grade made of wood and other lignocellulosic products conforming to IS-303 (as shown on drg) fixed with steel screws made to shape fixed in position complete all as shown on drg, specified & directed by Engr-in-Charge.

Replacement of ply wood on both side of head rest frame with S&F new 3.5mm thick ply wood one side teak veneered & other side commercial grade - I (with BWR Resin) and including teak wood beading plain for head rest alround and Half cut round beading front side and other side complete as per drg, beading made to shape fixed in position complete all as shown on drg specified and directed.

Replacement of leg of head rest with S&F new Ist class HW (teak wood) leg made to shape fixed in position complete all as shown on drg specified and directed.

Replacement of plywood 3.5mm thick, one side teak, and plain beading and half cut round beading of foot rest with S&F new ply wood of foot rest fixing in position complete all as shown on drg, specificed and directed.

Replacement of leg of foot rest with S&F new Ist class HW (teak wood) leg made to shape fixed in position complete all as shown on drg specified and directed.

Replacement of long rail with S&F new Ist class HW (teak wood) long rail made to shape fixed in position complete all as shown on drg specified and directed.

Replacement of short rail with S&F new Ist class HW (teak wood) short rail made to shape fixed in position complete all as shown on drg specified and directed.

Replacement of stiffener with S&F new Ist class HW (teak wood) stiffener made to shape fixed in position complete all as shown on drg specified and directed.

Replacement of mild steel bracket with S&F new mild steel bracket made out of 40mm x 40mm x 6mm flat iron, made to shape fixed in position complete all as shown on drg specified and directed .

Polishing one coat to old & two coats to new surface after repairs with melamine polish of approved Make including preparation of surfaces. All as specified & directed by the EIC/GE

BOOK CASE : FD-45(M), FD-237, FD-355

Removing of existing U/S shutter and S & F of new shutters of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 3 mm thick teak wood beading on three side of shutters all as specified and directed by Engr-in-Charge.

Removing of existing U/S back and S & F of new back of 6 mm thick plywood BWR grade commercial type all as specified and directed by Engr-in-Charge.

Removing of existing U/S leg and S & F of new leg of teak wood duly planned and finish complete all as specified and directed by Engr-in-Charge.

Removing of existing U/S long rail and S & F of new long rail of teak wood duly planned and finish complete all as specified and directed by Engr-in-Charge.

Removing of existing U/S side & partition and S & F side & partition 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 3 mm thick teakwood beading on front edge of the shelf with nails. all as specified and directed by Engr-in-Charge.

Removing of existing U/S shelve and S & F of new shelve of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 3 mm thick teak wood beading on front edge of the shelf with nails. all as specified and directed by Engr-in-Charge.

Removing of existing U/S MS hinges and S & F of Piano type ISI marked hinges all as specified and directed Engr-in-Charge.

Removing of existing U/S top & bottom and S & F new top & bottom of 18mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE all as specified and directed EIC/GE

Removing of existing U/S knob & S & F new CP knob fixed with steel screw all as specified & directed by Engr-in-Charge.

Polishing two coats to old & new surfaces after repairs with melamine polish of approved Make including preparation of surfaces. All as specified & directed by the Engr-in-Charge.

TABLE WRITING : FD-33, FD-249, FD-275

Dismantling, taking out carefully & replacement of old existing broken top of Table of any description & replacement of the same with S&F new table top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE including 4mm thick teak wood beading alround, made to shape, fixed in position all as approved, shown on drg, specified & directed by the EIC/GE

Replacement of shutters (complete) with S & F 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE. complete all as shown on drgs, specified and directed by the EIC/GE

Replacement of TOP long rails with S&F new TOP long rail made out of Ist class Hard Wood (teak wood) complete all as shown on drgs, specified and directed by the Engr-in-Charge.

Replacement of TOP short rail with S&F new TOP short rail of made out of Ist class Hard Wood (teak wood) complete as shown on drgs, specified and directed by the EIC/GE

Replacement of drawer with knob Chromium plated 40mm dia with S&F complete new drawer made out of Ist class hard wood (teak wood) with knob Chromium plated 40mm dia as approved by GE complete all as shown on drgs, specified and directed by the EIC/GE

Replacement of Leg with S&F new Leg with made out Ist class MP (teak wood) complete all as shown on drgs, and directed by the Engr-in-Charge.

Replacement of bottom centre stiffener with S&F new bottom centre stiffener made out of Ist class Hard Wood (teak wood) complete all as shown on drgs, specified and directed by the Engr-in-Charge.

Replacement of bottom side stiffener with S&F new bottom side stiffener made out of Ist class Hard Wood (teak wood) complete all as shown on drgs, specified and directed by the Engr-in-Charge.

Replacement of rubber shoe with screw(steel) with S&F new Nylon Buffer of superior qulaity screws (steel) of suitable size complete as approved & all as shown on drgs, specified & directed by the Engr-in-Charge.

Polishing two coats to old & new surfaces of table with melamine polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after carrying out antitermite & antibug treatment. All as specified & directed by the Engr-in-Charge.

TEAPOY : FD-34(M), FD-232, FD-278, FD-382

Dismantling, taking out carefully and replacement of old existing broken top of teapoy of any description, & replacement of the same with S&F new top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE and including 4mm thick teak wood beading alround, made to shape, fixed in position, all as shown on drg, specified in particular specification & directed by the Engr-in-Charge complete materials & labour.

Replacement of leg with S&F new teak wood leg made to shape.

Replacement of long rail with S&F new teak wood long rails made to shape.

Replacement of short rails with S&F new teak wood short rails made to shape.

Replacement of stiffener with S&F new teak wood stiffener made to shape.

S & F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed by the Engr-in-Charge

Polishing two coats to old & new surfaces after repairing with melamine polish of approved Make including preparation of surfaces. All as shown on drg, specified & directed by the Engr-in-Charge

TABLE 900 MM X 600 MM OR (3' x 2') (WOODEN) W/O DRAWER : FD-42, FD-55, FD-223, FD-231, FD-284

Dismantling, taking out carefully & replacement of old existing broken table top of Table of any decription & replacement of the same with S&F new table top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with including 4mm thick Ist class teak wood moulded design, beading alround, made to shape, fixed in position all as approved, shown on drg, specified & directed by the Engr-in-Charge.

Replacement of legs of table S&F new leg made out of Ist class HW (teak wood)

Replacement of table frame's rail with S&F new table frame's long rail made out of Ist class HW (teak wood) complete all as shown on drgs, specified and directed by the EIC/GE

S & F new Stiffener and complete all as shown on drgs, specified and directed by the Engr-in-Charge.

Replacement of rectangutar bracket with 08 Nos steel screws suitable size of Ist class hard wood (teakwood) of size 100 mm x 100 mm x 25mm complete as approved and all as shown on drgs.

Replacement of rubber shoe with screw (steel) with S&F new Nylon Buffer of superior quality screws (steel) of suitable size complete as approved and all as shown on drgs, specified & directed by the Engr-in-Charge.

Polishing two coats to old & new surfaces after repairs with melamine polish of approved Make including preparation of surfaces.

TABLE 900 MM X 600 MM WITH DRAWER (3' x 2') (WOODEN) : FD-41, FD-224, FD-283

Dismantling, taking out carefully & replacement of old existing broken table top of Table of any decription & replacement of the same with S&F new table top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with including 4mm thick Ist class teak wood moulded design, beading alround, made to shape, fixed in position all as approved, shown on drg, specified & directed by the Engr-in-Charge.

Replacement of legs of table S&F new leg made out of Ist class hard wood (teak wood)

Replacement of table frame's rail with S&F new table frame's long rail made out of Ist class hard wood (teak wood) complete all as shown on drgs, specified and directed by the EIC/GE

Replacement of U/S drawer with new drawer of same size and shape to Table. Front of the drawer shall be made out of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE and including CP knob. Sides, base and back of drawer made out of 12mm thick ply wood (ISI marked) and fixing all as shown in drg including one coat of melamine polish.

S & F new Stiffener and complete all as shown on drgs, specified and directed by the Engr-in-Charge.

Removing of existing U/S knob and S & F new CP knob fixed with steel screw all as specified & directed by Engr-in-Charge.

Replacement rectangutar braket with 08 Nos steel screws suitable size of Ist class hard wood (teakwood) of size 100 mm x 100 mm x 25mm complete as approved and all as shown on drgs.

Replacement of rubber shoe with screw (steel) with S&F new Nylon Buffer of superior quality screws (steel) of suitable size complete as approved and all as shown on drgs, specified & directed by Engr-in-Charge.

Polishing two coats to old & new surfaces after repairs with melamine polish of approved Make including preparation of surfaces. All as specified & directed by Engr-in-Charge.

TABLE DRESSING GENTS : FD-31(M), FD-230, FD-379

Dismantling, taking out carefully and replacement of old existing broken top of table dressing gents of any description & replacement of the same with S&F new top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with and including 3mm thick teak wood beading alround made to shape, fixed in position, all as shown on drg, specified and directed by the Engr-in-Charge complete materials & labour.

Replacement of side with S&F new side of 12mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE including 3mm thick teak wood beading alround, made to shape, fixed in position, all as shown on drg, specified and directed by the Engr-in-Charge complete materials & labour.

Replacement of bottom with S&F new 12mm thick ply, teak veneered on one side and commercial on other side grade I with (BWR Resin) made to shape fixed in position, all as shown on drg, specified and directed by the Engr-in-Charge complete materials & labour.

Replacement of drawer with S&F new drawer made to shape fixed in position, all as shown on drg, specified and directed by the Engr-in-Charge

Replacement of back frame with S&F new back frame made out of 45mm x 40mm teak wood members & 6mm thick commercial ply grade BWR type BB, made to shape fixed in position, all as shown on drg, specified and directed by the Engr-in-Charge

Replacement of knob with S&F new chromium plated knob 25mm dia, 24mm length as approved by the Engr-in-Charge of best quality.

Replacement of mirror with S&F new mirror of size 380mm x 760mm x 5.5mm thick made to shape fixed in position, all as shown on drg, specified and directed by the Engr-in-Charge

After repairs melamine polishing two coats to old & new surfaces including preparation of surfaces for table dressing gents complete all as specified & directed by Engr-in-Charge.

TABLE DRESSING LADIES WITH MIRROR : FD-32(M), FD-251, FD-378, FD/MAP-II/07

Replacement of short rail of table dressing ladies with S&F new short rail of Ist class HW (MP teak wood). all as shown on drgs, specified in particular specification and directed by the Engr-in-Charge complete materials & labour

Removing old broken/ U/S knob from table dressing ladies and S & F new 75 mm size CP handle as per shape and size shown in drg and as directed by Engr-in-Charge.

Replacement of side long rail jointed to leg of table dressing ladies with S&F new side long rail jointed to leg of Ist class HW (MP teak wood). all as shown on drgs, specified in particular specification and directed by the Engr-in-Charge complete materials & labour

Removing old broken/U/S sunmica from the top of table dressing ladies and S & F new 1.5 mm thick sunmica of best quality fixed with fevicol as per shape and size shown in drg complete all as specified and directed.

Removing old broken/U/S sunmica from the drawer of table dressing ladies and S & F new 1.5 mm thick sunmica of best quality fixed with fevicol as per shape and size shown in drg complete all as specified and directed.

M & L for replacement of U/S 6mm thick back ply wood.

M & L for replacement of U/S stiffener between legs.

Replacement of legs of table dressing ladies with S&F new legs of Ist class HW(MP teak wood). all as shown on drgs, specified in particular specification and directed by the Engr-in-Charge complete materials & labour

Dismantling, taking out carefully old existing broken top of table dressing ladies of any description & replacement of the same with S&F new top table dressing ladies of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE, made to shape, fixed in position, all as shown on drgs, specified in particular specification and directed by the Engr-in-Charge complete materials & labour.

Replacement of side of table dressing ladies with S&F new side of table dressing ladies all as shown on drgs, specified in particular specification and directed by the Engr-in-Charge complete materials & labour.

Replacement of bottom commercial ply with teak (veneered one side) commercial other side) with S&F new bottom commercial ply with teak veneered one side (commercial other side). All as shown on drgs, specified in particular specification and directed by the Engr-in-Charge complete materials & labour

Replacement of drawer of table dressing ladies with S&F new drawer as per Drg and approved. all as shown on drgs, specified in particular specification and directed by the Engr-in-Charge complete materials & labour

Repair of Stool dressing and S & F PU foam cushion with 40 Density with Tapestry cloth as approved by EIC/GE of rate not less than Rs 300/RM complete as per Drg and as directed by EIC.

Removing old broken/ U/S sliding glass from table dressing ladies and S & F new 5mm thick sheet glass with plastic handle as per sample, shape and size shown in drg complete all as specified and directed by Engr-in-Charge.

Removing of old U/S looking mirror from table dressing ladies and S & F new looking mirror as per sample, shape and size shown in drg duly fixed in and including frame of teak wood and polishing complete in all respect to fix on wall all as shown on drg by Engr-in-Charge.

Melamine Polishing two coats to old & new surfaces including preparation of surfaces for table dressing ladies. all as specified & directed by Engr-in-Charge.

REPAIRS TO STEEL LOCKER OF SORTS : FD-127(M), FD-257, FD-1029, CWE/ BPL/53

Dismantling, taking out carefully of old existing broken U/S Locks with key cover of any description & replacement of the same with S &F new Locks brass six levers, with double key including new key cover complete on external face of locker steel & suitable 4mm dia screws complete machine all as shown on drg specified and directed by Engr-in-Charge.

Replacement of Handle with S&F new 100 mm Chromium plated handle complete with nuts and pins complete all as shown on drg, specified and directed by Engr-in-Charge.

Replacement of three way locking device with S&F new three way locking device of 10mm dia, MS Rod & brass shackles complete with fixing accessories for locker steel complete all as shown on drg, specified and directed .

Replacement of legs with S&F new legs made out of 1.00 mm thick MS sheet complete all as shown on drg, specified and directed.

Replacement of shelf with S & F New shelf made out of 16 gauge MS sheet complete all as shown on drg, specified and directed .

Replacement with S&F new C.P. conduit pipe 20 mm dia for locker steel or sorts complete all as shown on drg, specified and directed .

Chromium plated safety type 100mm long hasp & staples

Replacement of U/S socket with new aluminium socket/ brackets suitable for MS 20mm dia conduit pipes.

Replacement of Door Shutter with S & F New door shutters must be made of 1mm thick MS sheet, made to shape and size, all as specified and shown in drg or as directed by EIC

Preparation of existing decorated surfaces of the locker steel with removing all dents, filling with putty and spray painting one coat of synthetic enamel paint with Ist grade quality of paint (External & Internal) as indicated on drgs to be painted material and labour complete all as specified and directed by Engr-in-Charge, colour shade as approved by GE/EIC.

TABLE DINING (ORS) (2100 X 900 X 760) : FD-165 (M)

Dismantling, taking out carefully old existing broken table top of the table of any description & replacement of the same with S & F new table top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/ shade as approved by EIC/GE made to shape, fixed in position, all as shown on drgs and specified and as directed by Engr-in-Charge.

Replacement of legs of table Dining (ORS) with S & F new legs made out of 25 mm square mild steel tube 16 Gauge complete all as shown on drg.

Replacement of top frame long rail with S & F new Top frames long rail made out of 25 mm square mild steel tube, 16 Gauge complete all as shown on drgs.

Replacement of top frame short rail with S & F new Top frames short rail made out of 25 mm square mild steel tube, 16 Gauge complete all as shown on drg.

Replacement of stiffener with S & F new stiffener made out of 25 mm square mild steel tube, 16 Gauge complete all as shown on drg.

Replacement of foot rest with S & F new foot rest made out of 25 mm square mild steel tube, 16 Gauge complete all as shown on drg.

Welding work wherever required as directed by EIC and GE.

Replacement of rubber shoe with S & F new hard rubber shoe of superior quality complete all approved and all as shown on drgs, specified and directed by Engr-in-Charge.

Preparation of existing decorated surfaces of the Table with removing all dents, filling with putty and spray painting one coat of synthetic enamel paint black with Ist grade quality of paint (External & Internal) as indicated on drgs to be painted material and labour complete all as specified and directed by Engr-in-Charge, colour shade as approved by GE/EIC.

TABLE 900X600X760MM WITH DRAWERS : FD-1008

Table top of size 900mmx600mm made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE including 4mm thick teak wood edging all as per drg, specified and directed by Engr-in-Charge.

Lock all as per drg, specified and directed by Engr-in-Charge.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 gauge as per drg.

Stiffeners as per drg.

Repairs to Drawer include tinkering/denting, painting, welding, etc. all as shown as specified & as directed.

Welding work wherever required as directed by EIC

Shoes all as per drg, specified and directed by Engr-in-Charge.

Painting to table internally and externally with synthetic enamel paint of existing color after preparation of surfaces. All as per drg, specified and directed by Engr-in-Charge.

TABLE 3'X 2' STEEL WITH OUT DRAWER : FD-1007

Table top of size 900mmx600mm made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE including 4mm thick teak wood edging all as per drg, specified and directed by Engr-in-Charge.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 gauge as per drg.

Stiffeners as per drg.

Continuous Gas welding as required per 10 CM.

Shoes all as per drg, specified and directed by Engr-in-Charge.

Preparation of old surface by removing all dents filling with putty and painting with one coat of olive green synthetic enamel paint complete, all as specified and directed by Engr-in-Charge

TABLE 900X900X760 WITHOUT DRAWERS : FD-1009

Table top of size 900mmx900mm made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE including 4mm thick teak wood edging all as per drg, specified and directed by Engr-in-Charge.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 gauge as per drg.

Stiffeners as per drg.

Welding work wherever required as directed by EIC

Shoes all as per drg, specified and directed by Engr-in-Charge.

Preparation of old surface by removing all dents filling with putty and painting with one coat of olive green synthetic enamel paint complete, all as specified and directed by Engr-in-Charge

CUSHIONS OF SOFA SET : FD-281, 373, FD/MAP-II/02:

Supply of new cushion for Sofa single/three seater made of 100 mm thick 'U' foam, 40 density, ISI marked covered with best quality tapestry cloth of approved colour (not less than Rs. 300/- per RM) duly wraped with long cloth of existing pattern and as per drgs and directed by GE/EIC. (Make of Foam Cushion:Sleepwell/ Springwell/Kurlon).

CHAIR VERANDAH:- FD/MAP-II/06

Removing the existing U/S broken PVC seat and back from the chair verandah MAP, S & F new PVC seat and back 4mm thick to the chair after providing flat iron 20mmx4mm support in centre of seat only by proper welding for support of PVC seat after applying one coat of primer and two coats of synthetic enamel paint white color to the flat iron. The PVC seat shall got approved from GE before supply. MAKE OF PVC SEAT –AMKO/ COMFO/ HARMONY. complete as per drg, specified & directed by the Engr-in- Charge.

CHAIR DINING (JCO/ORS) : FD/MAP-II/05

Removing of old U/S/broken PVC seat from chair and S & F new PVC seat 4mm thick in single piece all as per shape and size shown on drg and as directed by the Engr-in- Charge.

WOODEN DESK SCHOOL WITH BENCH TYPE-A (1120mm X 450mm X770 mm) : CWE/BPL/TD/53/98

Preparation of old painted surface of Desk by scrapping and painting with 1st quality synthetic enamel paint brown completed all as per drg, specified & directed by Engr-in-Charge.

Preparation of old painted surface of Bench by scrapping and painting with 1st quality synthetic enamel paint brown completed all as per drg, specified & directed by Engr-in-Charge.

WOODEN DESK SCHOOL WITH BENCH TYPE-B (960mm X 450mm X 620 mm) : CWE/BPL/TD/53/98

Preparation of old painted surface of Desk by scrapping and painting with 1st quality synthetic enamel paint brown completed all as per drg & specified & directed by Engr-in-Charge.

Preparation of old painted surface of Bench by scrapping and painting with 1st quality synthetic enamel paint brown completed all as per drg & specified & directed by Engr-in-Charge.

REPAIRS TO PEG TABLE : FD-25(M), FD-236, FD-277, FD-384

Dismantling, taking out carefully and replacement of old existing broken top of peg table of any description & replacement of the same with S&F new top of peg table with Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 3 mm thick teak wood beading all around made to shape, fixed in position. rest all as per drg and directed by the EIC

Replacement of leg with S&F new teak wood leg made to shape.

Replacement of long rail with S&F new teak wood long rails made to shape.

Replacement of short rails with S&F new teak wood short rails made to shape.

S & F new hard PVC/rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg. complete all as specified and directed by the Engr-in-Charge.

Polishing one coat to old and two coats to new surfaces after repairing with melamine polish of approved Make including preparation of surfaces all as shown on drg and directed by the Engr-in-Charge.

CHAIR WRITING OFFICERS : FD/E6/MAP/12

Removing U/S damaged Seat & back of Chair writing. S & F new seat & back made of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic mtr on Hampden machine.

Removing old U/S arm rest of chair writing officer and S&F new arm made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed.

Welding work wherever required as directed by EIC

Replacement of shoe with S&F new shoe made to shape all as specified and directed by Engr in charge.

Painting to all steel portion of chair writing with one coat of synthetic enamel black paint after cleaning, dusting and scratching the entire metal surface of chair with sand paper, making surface neat and smooth.

M/s Sohan Singh Mathur

M/s Raghav Traders

M/s. Ravi and brothers