Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.7 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹28.7 L+₹97,715 (3.53%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹30.8 L+₹3.1 L (11.1%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹33.5 L+₹5.8 L (20.9%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹35.2 L+₹7.5 L (27.0%)Rejected-Finance 1ST FLOOR GURJEET MARKET DHANGU ROAD | L5 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | Vijay Kumar Contractor and Engineers L5 | M/S SOHAL CONSTRUCTION CO L2 | M/S NAVEEN PATHANIA L3 | M/S BHAGYARAJ BUILDER L1 | LAKSHMI BUILDING INOVATORS L4 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down cement plaster on brick or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed by Engineer-in-Charge. | 510 | Sqm | 10 ₹5,100 Lowest | 10 ₹5,100 Lowest | 20 ₹10,200 | 19.85 ₹10,123.5 | 10 ₹5,100 Lowest |
| 2.00 | Material and labour 10 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces and finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-Charge. | 350 | Sqm | 150 ₹52,500 | 150 ₹52,500 | 140 ₹49,000 | 130 ₹45,500 Lowest | 210 ₹73,500 |
| 3.00 | Material and labour 15 mm thick rendering in two layers (5 mm thick in cement mortar 1:4 over 10 mm thick in cement mortar 1:6) mixing with WPC on top layer @ 200 ml/ bag of cement on brick or concrete surfaces and finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-Charge. (WPC shall be measured and paid separately). | 160 | Sqm | 350 ₹56,000 | 150 ₹24,000 Lowest | 150 ₹24,000 Lowest | 200 ₹32,000 | 200 ₹32,000 |
| 4.00 | Supply only liquid water proofing compound complete all as specified & directed by Engineer-in-Charge. | 1 | Ltr | 200 ₹200 | 150 ₹150 | 200 ₹200 | 485 ₹485 | 90 ₹90 Lowest |
| 5.00 | Material and labour for rendering or plastering work 10 mm thick in cement mortar 1:3 in fascia or edging of Chajjas, ceiling etc, including roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement complete all as specified & directed by Engineer-in-Charge. | 90 | Sqm | 250 ₹22,500 | 200 ₹18,000 Lowest | 300 ₹27,000 | 285 ₹25,650 | 400 ₹36,000 |
| 6.00 | Material and labour for preparation of surfaces of wall and applying 3mm thick wall care putty and making the surface smooth complete all as specified & directed by Engineer-in-Charge. | 100 | Sqm | 40 ₹4,000 | 40 ₹4,000 | 50 ₹5,000 | 145 ₹14,500 | 30 ₹3,000 Lowest |
| 7.00 | Material and labour for preperation of new surfaces of wall and applying two coats of oil bound distemper using auto paint roller over one coat of chalk white primer on wall surfaces complete all as specified & directed by Engineer-in-Charge. | 280 | Sqm | 30 ₹8,400 | 20 ₹5,600 Lowest | 24 ₹6,720 | 80 ₹22,400 | 39 ₹10,920 |
| 8.00 | Material and labour for preparation of old decorated plastered or unplastered surfaces of Walls by brooming down or steel wire brushing ,scrapping down smoke soots, moulds and efforescent salts and trading oil and greasy spots including cornices washing down etc with clean water and applying two coat of oil bound Distemper, white or tinted incl removing nails etc using auto paint roller & making good disturbed surface complete all as specified & directed by Engineer-in-Charge. | 250 | Sqm | 30 ₹7,500 | 20 ₹5,000 Lowest | 27 ₹6,750 | 35 ₹8,750 | 39 ₹9,750 |
| 9.00 | Material and labour for three coat of white wash on newly plaster surface of walls including preparation of surface complete all as specified & directed by Engineer-in-Charge. | 70 | Sqm | 10 ₹700 | 10 ₹700 | 40 ₹2,800 | 10 ₹700 | 6 ₹420 Lowest |
| 10.00 | Material and labour for preparation of old decorated plastered or unplastered surfaces of Walls by brooming down or steel wire brushing ,scrapping down smoke soots, moulds and efforescent salts and trading oil and greasy spots including cornices washing down etc with clean water and applying one coat of white wash including removing nails etc & making good disturbed surface complete all as specified & directed by Engineer-in-Charge. | 80 | Sqm | 5 ₹400 Lowest | 10 ₹800 | 30 ₹2,400 | 9 ₹720 | 6 ₹480 |
Tender Value
₹36 L
EMD Value
₹72,000
Closing Date
18 Jul 2025, 6:00 pmClosed
GE (AF) Pathankot
GE (AF) Pathankot
REPAIR TO FLOORING PLASTERING PLUMBING SANITARY FITTING IN OMQs SMQs OFFRS MESS OI SMC AND STN HQ BLDG AND OTHER OTM BLDG IN NO 1 AREA DOMESTIC AT AIR FORCE STATION PATHANKOT
2025_MES_715687_1
GE/PAF-34/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE (AF) Pathankot
As per NIT
8 documents required · 8 mandatory
₹500
Yes
GE (AF) Pathankot
₹72,000
Yes
11 Oct 2025
20 Jun 2025
21 Jul 2025
20 Jun 2025
18 Jul 2025
4 Jul 2025
Amount
Taking down cement plaster on brick or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed by Engineer-in-Charge.
Material and labour 10 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces and finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.
Material and labour 15 mm thick rendering in two layers (5 mm thick in cement mortar 1:4 over 10 mm thick in cement mortar 1:6) mixing with WPC on top layer @ 200 ml/ bag of cement on brick or concrete surfaces and finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-Charge. (WPC shall be measured and paid separately).
Supply only liquid water proofing compound complete all as specified & directed by Engineer-in-Charge.
Material and labour for rendering or plastering work 10 mm thick in cement mortar 1:3 in fascia or edging of Chajjas, ceiling etc, including roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement complete all as specified & directed by Engineer-in-Charge.
Material and labour for preparation of surfaces of wall and applying 3mm thick wall care putty and making the surface smooth complete all as specified & directed by Engineer-in-Charge.
Material and labour for preperation of new surfaces of wall and applying two coats of oil bound distemper using auto paint roller over one coat of chalk white primer on wall surfaces complete all as specified & directed by Engineer-in-Charge.
Material and labour for preparation of old decorated plastered or unplastered surfaces of Walls by brooming down or steel wire brushing ,scrapping down smoke soots, moulds and efforescent salts and trading oil and greasy spots including cornices washing down etc with clean water and applying two coat of oil bound Distemper, white or tinted incl removing nails etc using auto paint roller & making good disturbed surface complete all as specified & directed by Engineer-in-Charge.
Material and labour for three coat of white wash on newly plaster surface of walls including preparation of surface complete all as specified & directed by Engineer-in-Charge.
Material and labour for preparation of old decorated plastered or unplastered surfaces of Walls by brooming down or steel wire brushing ,scrapping down smoke soots, moulds and efforescent salts and trading oil and greasy spots including cornices washing down etc with clean water and applying one coat of white wash including removing nails etc & making good disturbed surface complete all as specified & directed by Engineer-in-Charge.
Material and labour for three coat of white wash on newly plaster surface of ceilings including preparation of surface complete all as specified & directed by Engineer-in-Charge.
Material and labour for preparation of old decorated plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing ,scrapping down smoke soots, moulds and efforescent salts and trading oil and greasy spots including cornices washing down etc with clean water and applying one coat of white wash including removing nails etc using auto paint roller & making good disturbed surface complete all as specified & directed by Engineer-in-Charge.
Dismantling of floor, hearth or wall tiling,any type flooring including cement mortar bedding (but not backing )and rubbish off the premises complete all as specified & directed by Engineer-in-Charge.
Material and labour for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc. 0.11 sqm and n. exc. 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over and including screed bed or bedding layers of mortars 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified & directed by Engineer-in-Charge.
Material and labour for vitrified ceramic tiles 10mm thick (square/ rectangular), polished, area of each tile n. exc. 0.36 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over and including screed bed or bedding layers of mortars 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified & directed by Engineer-in-Charge.
Material and labour for vitrified ceramic tiles 10mm thick (square/ rectangular), polished, area of each tile exc. 0.42Sqm but n. exc. 1.00 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over and including screed bed or bedding layers of mortars 15 mm thick in cement mortar 1:6/mixed with adhesive for laying floor finishes complete all as specified & directed by Engineer-in-Charge.
Material and labour for glazed ceramic coloured in different colour combination(alongwith highlighter shade) as approved by GE ,450x350x7mm thick on vertical surfaces such as skirting, dados and riser to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10mm thick in cement mortar (1:4) on brick or concrete surface complete all as specified & directed by Engineer-in-Charge.
Material and labour for 7-9mm thick vitrified glossy bathroom wall tiles of size 600mm x 1200mm in different colour combination or any shade as approved by GE, on vertical surfaces such as skirting, dados etc set and jointed using proper adhesive chemical mixture and proper levelling including cutting for sanitary fittings complete all as specified & directed by Engineer-in-Charge.
Material and labour for granite work 16mm to 18mm thick (table rubbed and polished)as in steps and skirting of staircase, cooking plateforms and , treads, riser or landing of stair hall, window cill and like over 10mm thickscreed bed/plaster in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of other than white and black incl cutting of 25 mm dia hole for gas pipe( for cooking platform) and including rounding to edges complete incl roughning of existing surface complete all as specified & directed by Engineer-in-Charge.
Material and labour for 50mm thick Cement concrete type B- 1, 1:2:4 (20mm graded crushed stone aggregate) as in floors finished even and smooth with using extra cement complete all as specified & directed by Engineer-in-Charge.
Material and labour for taking down and refixing the shutters of any description exc. 1 Sqm but n. exc. 2 Sqm in same or other opening after repair, easing and adjusting or resecuring complete all as specified & directed by Engineer-in-Charge.
Material and labour for 60 mm thick Machine pressed coloured (red/yellow combination) with rubber moulding of 10mm thickness and glossy finish, precast cement concrete interlocking paver block any shape and sizs as directed, confirming to IS 15658-2006, M-35 Grade as in floor etc. with grey cement and pigment complete all as specified & directed by Engineer-in-Charge.
Material and labour for heavy duty endura tiles for exterior surface in different color combinations as approved by GE set and laid over 15 mm thick screed bed in cement mortar (1:4) complete all as specified & directed by Engineer-in-Charge.
Material and labour for non skid heavy duty designer coloured tiles as in floor for parking or other open area like flag post etc of 10 to 12 mm thick area of each tile exc. 0.11 sqm and n. exc. 0.18 sqm in floors etc of pattern as approved by GE, set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over and including screed bed or bedding layers of mortars 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified & directed by Engineer-in-Charge.
Material and labour for sand filling under floors,(paver blocks) of required thickness n. exc 50mm thick, spreading and levelling complete all as specified & directed by Engineer-in-Charge.
Material and labour for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring to recive pavers complete all as specified & directed by Engineer-in-Charge.
Material and labour for PCC 1:2:4 Type B-1 (using 20mm graded crushed stone aggregate) as in rounded or chamfered on edges or in coping to top of brick work in any description or other similar works including necessary form work complete all as specified & directed by Engineer-in-Charge.
Supply and fixing GI pipe 32 mm dia light grade (in short length) as spout pipe in sunken floor slab laid in slope to brick wall with PCC (1:2:4) type B-1, complete all as specified & directed by Engineer-in-Charge.
Material and labour for demolition of cement concrete of any dersription and in any position not specifically provided for complete all as specified & directed by Engineer-in-Charge.
Material and labour 10 mm thick cement plaster in cement mortar 1:3 on brick or concrete surface of sunken floor finished even and smooth using WPC liquid as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directed by Engineer-in-Charge. (WPC shall be measured and paid separately)
Material and labour for bitumen blown any grade, applied hot, two coats, to concrete/plastered surfaces at the rate of 1.5 Kg per sq m per coat and applying polythene film black, 50 micron complete for sunken floor slab and embedded in side wall / covered fillet complete all as specified & directed by Engineer-in-Charge.
Material and labour for 25 mm thick PCC type B-1, 1:2:4 ( using 20mm graded crushed stone aggregate) as in sub floors for laying floor finish complete all as specified & directed by Engineer-in-Charge.
Material and labour Plain cement concrete 1:5:10 type E2 using 40mm graded crushed stone aggregate as in sunken floors complete all as specified & directed by Engineer-in-Charge.
Supply and fixing in repair 75 mm bore PVC pipes ISI marked in any length with or without ears laid in floor complete all as specified & directed by Engineer-in-Charge.
Supply and fixing in repair PVC floor trap 75 mm with anti cocroach grating, with or without hole including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating complete all as specified & directed by Engineer-in-Charge.
Supply and fixing in repair 75mm dia PVC bends/hill rest bends (any radius) diminishing pieces or tapers (larger bore measured complete all as specified & directed by Engineer-in-Charge.
Taking down eaves gutters and rainwater pipes 100 mm dia (any size or pattern) , including all fitting ,head ,shoes ,bend, swan-nacks etc., including cleaning or refixing or removal to store complete all as specified & directed by Engineer-in-Charge.
Supply and fixing PVC(SWR) pipes 110 mm bore, single socketd , in any length with rubber ring joints , in any length fixed to walls complete all as specified & directed by Engineer-in-Charge.
Supply and fixing PVC (SWR) bend with ovel accessed door any radius 75mm dia bore complete all as specified & directed by Engineer-in-Charge.
Material and labour taking down 15 mm bore GI tubing ,fitting and connections etc complete all as specified & directed by Engineer-in-Charge.
Material and labour taking down 20/25 mm bore GI tubing ,fitting and connections etc complete all as specified & directed by Engineer-in-Charge.
Refixing of old steel tubing 15/20 mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc complete all as specified & directed by Engineer-in-Charge.
Supply and fixing 15 mm bore CPVC pipes ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling complete all as specified & directed by Engineer-in-Charge.
Supply and fixing 20 mm bore CPVC pipes ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling complete all as specified & directed by Engineer-in-Charge.
Supply and fixing 25 mm bore CPVC pipes ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling complete all as specified & directed by Engineer-in-Charge.
Supply and fixing in repair in Art western white/ off white viterous china rimless single piece WC of Appx size 395 x 710 x 730 mm with UF soft close seat cover, hinges, dual flush cistern fitting, fixing accessories and accessories set, P/S tra, including provn of CP health faucet and its stand complete all as specified & directed by Engineer-in-Charge.
Supply and fixing for toilet paper holder CP, fixed complete all as specified & directed by Engineer-in-Charge.
Supply and fixing in repairs decorative shape type table top Vitreous china wash basin, white of,size 495mm x 395mm x 150mm mm including CP waste coupling full thread of suitable sie of wash basin and waste pipe ncluding fixing of central hole mixer complete all as specified & directed by Engineer-in-Charge. Note : fixing of wash basin on granite/any type of surface with adhesive or any type of material deemed to be included in rate quoted by contractor.
Supply and fixing in repair CP 3-in-1 wall mixture with telephonic shower for 15 mm bore pipe, cast copper alloy chromium plated complete all as specified & directed by Engineer-in-Charge.
Supply only chromium plated brass central hole single lever WHB Mixture for table top wash basin 15 mm bore for mixing hot and cold water with 450 long braided house 20 cartriage size screwed down, high pressure screwed for iron pipe complete all as specified & directed by Engineer-in-Charge.
Supply and fixing in repair Vitreous china wash down water closet pan pedestal pattern, white (excluding supply of flushing cistern) including flush pipes, CP jet with flexible pipe including making connections to trap, and to flush pipe including plastec seatcover closed pattern with stainless steel or aluminised hinging device complete all as specified & directed by Engineer-in-Charge.
Supply and fixing in repair PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified & directed by Engineer-in-Charge.
Supply and fixing in repairs Vitreous China wash basin, white, flat back, size 450x300mm including brackets, 32 mm bore CP waste pipe long screw thread and 32 mm dia flexible waste pipe complete all as specified & directed by Engineer-in-Charge.
Supply and fixing fancy type long body Bib taps for 15 mm bore pipe, cast copper alloy chromium plated complete all as specified & directed by Engineer-in-Charge.
Supply and fixing fancy type swan neck pillar taps for 15 mm bore pipe, cast copper alloy with capstan heads chromium plated, screwed down high pressurewith long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified & directed by Engineer-in-Charge.
Supply and fixing in repair fancy type angular Stop cock/angle cock 15mm bore pipe ,CP cast copper alloy complete all as specified & directed by Engineer-in-Charge.
Supply and fixing fancy type stainless steel shower rose of size 150mm x 150mm with arm of length 450mm, as approved by GE complete all as specified & directed by Engineer-in-Charge.
Supply and fixing in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified & directed by Engineer-in-Charge.
Supply and fixing in repair Stop valve concealed type cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified & directed by Engineer-in-Charge.
Supply and fixing in repairs CP soap dish fixed to walls with chromium plated (CP) brass screws complete all as specified & directed by Engineer-in-Charge.
Fixing only in repairs sanitary fittings including WC, Wash hand basin, wall Mixtures/centerhole mixtures of any type, Stop valves, shower rose, bib taps etc into same or other opening including necessary stainless steel fittings complete all as specified & directed by Engineer-in-Charge.
Material and labour for taking down existing boarding from wall/cupboard of any description complete all as specified & directed by Engineer-in-Charge.
Supply and fixing False ceiling of 9.5 mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm of manufacturer including taking down existing ceiling complete all as specified & directed by Engineer-in-Charge.
Supply and fixing Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified & directed by Engineer-in-Charge.
Material and labour for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frames as per specification and drawings complete all as specified and drawing. solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified & directed by Engineer-in-Charge.
Supply and fixing factory made single extruded WPC (wood polymer Composite) solid door/window/Ceosetory windows and other frames/chowkhat of size 45 X 70mm comprising of virgin PVC polymer of K value 58-60(suspension grade), calcium carbonate and natural fibres( wood powder/ rice husk/wheat husk) and non toxicc additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and and screwed with full body threaded star headed SS screws having minimum frame density 750 Kg/cum, screw withdrawal strength of 2200N ( Face) & 1100 N ( Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900N/mm2and resistance to spread of flame of class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fastners of required dia and length complete all as specified & directed by Engineer-in-Charge.
Supply and fixing factory made 25mm thick solid WPC(wood particle composit) sheet one side UV printed (of pattern as approved by GE)and other side wood nature colour for cupboard shutter of density 600 kg /Cbm bent 90° including 100% termite/water proof, fire rertradent, Eco friendly, and finish at all edges at level etc complete all as specified & directed by Engineer-in-Charge.
Supply and fixing in repair factory made 20 mm thick solid WPC(wood particle composit) without prelam sheet having both side wood nature colour for cupboard partitions/slabs of density 600 kg /Cbm bent 90° including 100% termite/water proof, fire rertradent, Eco friendly complete all as specified & directed by Engineer-in-Charge.
Material and labour for 0.80 mm thick PVC edge binding tape around the 20 to 25 mm thick PVC shutter edge colour as directed complete all as specified & directed by Engineer-in-Charge.
Supply and fixing 150 mm long fancy type stainless steel handel for shutters complete all as specified & directed by Engineer-in-Charge.
Supply and fixing continuous (piano) hinges, mild steel, bright finish width of flaps (when open ) 40 mm complete all as specified & directed by Engineer-in-Charge.
Supply and fixing 100mm size hasp and staple,stainless steel safety type, fixed with screws complete all as specified & directed by Engineer-in-Charge.
Supply and fixing high quality Magnet ball catcher for cupboard shutter, complete all as specified & directed by Engineer-in-Charge.
Supply and Fixing for soft close concealed steel Auto hinges for cabinet case complete all as specified & directed by Engineer-in-Charge.
Supply and Fixing for heavy duty 20'' long telescopic slider to facilitate drawer slide of steel ball bearing fixed with steel screws complete all as specified & directed by Engineer-in-Charge.
Material and labour for mortice locks to be fitted inside cup board/door shutters for for locking along with three sets of keys complete all as specified & directed by Engineer-in-Charge.
Material and labour for demolition of RCC in any position complete all as specified & directed by Engineer-in-Charge.
M/S SOHAL CONSTRUCTION CO (BID ID -3354843)
M/S NAVEEN PATHANIA (BID ID -3355707)
LAKSHMI BUILDING INOVATORS (BID ID -3355634)
Vijay Kumar Contractor and Engineers (BID ID -3353888)
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .