SPECIAL REPAIRS TO BUILDING NO T 1 URC CANTEEN, SPECIAL REPAIRS TO BUILDING NO P 27 CENTRAL MI ROOM AND CERTAIN MINOR WORKS UNDER GE WEST COLABA, MUMBAI.

Amount

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Supply and fixing Pre-painted roof sheet of mangalore tile pattern galvalume aluminium zinc coating GI based 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings having effective & overall width 1015 mm &1072 mm respectively, profile hieght 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including scaffoldings of any height complete all as specified and directed.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof coverings /claddings to wall, fixed with self tapping screws including scafoldings of any hieght complete all as specified and directed.

Supply and fixing for joist,channel, angle,or tee sections, or MS Flats fixed independantly without connecting plates,etc Fe 410-W (Gde-E- 250) quality- A (cut to ordinary lengths i.e within 20mm of length indicated) as in frame work for Galvalume / CGI roof/chajjas complete all as specified and directed.

Supply and fixing of structural steel work in tubular/square tube trusses including special shaped washer, gusset/bearing plate etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed.

Material and labour in repair to replace old decayed timber( including piecing, scarifying, etc of old and mew timber if required) second class hard wood clean sawn in scantlings timber framed and fixed in any position and description including scaffoldings of any height complete all as specified and directed.

Dismantling of Brick work or stone/boulder masonry built cement mortar or cement lime mortar complete all as specified and directed.

Material and labour for brickwork with sub class `B' bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.

Material and labour for brickwork except bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc any description complete all as specified and directed.

Material and labour for 12mm thick Ready Mix Plaster in single layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces, including use of scaffolding complete all as specified and directed. Note :- Liquid water proofing compound will be measured and paid seperately as supply only.

Material and labour rendering 15mm thick cement plaster in CM (1:6) other than fair faces of brick or concrete surfaces complete all as specified and directed.

Supply only liquid water proofing compound.

Material and labour for 10mm thick Ready Mix Plaster in single layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, on ceiling / chajja including use of scaffolding complete all as specified and directed.

Material and labour for prepartion of newly plastered ceiling surfaces and applying three coat of white wash complete all as specified and directed.

Material and labour for preparing newly plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of Anti-fungal, Dust resistant, Water repellant, Crack-bridging, weather proof type (Ist quality), Exterior Acrylic Emulsion paint (100% Acrylic) Base coat of Apex ultima of Asian Paints, protek duralife and top coat of Apex Ultima protek, over a coat of "Trucare" exterior wall primer, through authorized applicator only including use of scaffoldings complete all as specified and directed. Make: Asian Paints / Berger Paints ( Weather Coat All Guard) / Nerolac (Excel Top Guard) / Dulux Paints ( Dulux Weather shield Max), sample as approved by GE.

Material and labour for old plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of Anti-fungal, Dust resistant, Water repellant, Crack-bridging, weather proof type (Ist quality), Exterior Acrylic Emulsion paint (100% Acrylic) Base coat of Apex ultima of Asian Paints, protek duralife and top coat of Apex Ultima protek, over a coat of "Trucare" exterior wall primer, through authorized applicator only including use of scaffoldings complete all as specified and directed. Make: Asian Paints / Berger Paints ( Weather Coat All Guard) / Nerolac (Excel Top Guard) / Dulux Paints ( Dulux Weather shield Max), sample as approved by GE

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of Acrylic Washable Distemper, water-thinable acrylic base interior type, of 'Tractor Uno' of Asian Paints over a coat of 'Trucare' interior wall primer over 1mm thick (average) wall care putty including rubbing with sand paper, through authorised applicators of paint manufacturers complete all as specified and directed. Make: Asian Paints (Tractor Uno) / Berger Paints ( Jadoo) / Nerolac (Nerolac Beauty of Kansai) /, sample as approved by GE.

Material and labour for complete removal of existing treatment and applying two coats of Acrylic Washable Distemper, water-thinable acrylic base interior type, of 'Tractor Uno' of Asian Paints over a coat of 'Trucare' interior wall primer over 1mm thick (average) wall care putty including rubbing with sand paper, through authorised applicators of paint manufacturers complete all as specified and directed. Make: Asian Paints (Tractor Uno) / Berger Paints ( Jadoo) / Nerolac (Nerolac Beauty of Kansai) /, sample as approved by GE.

Dismantling of ceiling board (Plup insulation or insulation etc) or insulation board any thickness including cover fillet/grid complete all as specified and directed.

Material and labour for powder coated aluminium snap grid having a size of 605mm x 605mm and sections incorporated in frame work shall conform to IS 733, IS 737 and IS 1285 and snap grid frame work shall be fixed to ceiling with supporting hanger 6mm dia mild steel rod, J bolts with necessary bolts, nuts and washers all as per manufacturer's instruction. The main & cross tees shall be jointed at junction/crossings with anodized aluminum angle bracket of size 19.05mm x 19.05mm x 1.45mm, weighing 0.14 Kg per RM, fixed with suitable mild steel, bolts nuts and washer all as per manufacturer's instruction, the snap grid shall be supported at ends all along the wall with anodized aluminum angle of size 38mm x 25mm x 2.18mm, weighing 0.358 Kg per running meter complete all as specified and directed.

Supply and fixing 9mm thick PVC laminated gypsum ceiling tiles size of 600mm x 600mm, square edge, front side laminated PVC and back side aluminium foil complete all as specified and directed.

Supply and fixing 12 mm thick gypsum board false ceiling at various levels inclusive of GI perimeter channels of size 0.55 mm thick having one flange of 20mm and another flange of 30 mm and web of 27 mm along with perimeter of ceiling, suspending GI intermediate channels of size 45mm, 0.90 mm thick with two flanges of 15 mm each, GI cleat and steel expansion fastener at every 610 mm center to center ceiling section of 0.50 mm thick fixed to intermediate channels with help of connecting clip and the board should be jointed and finished so as to have flush look which includes finishing the tapered and square edges of boards and also rate shall be inclusive of cut outs for AC machines, spot lights fixtures and fire/security system complete all as specifed and directed.

Supply and fixing of 3mm thick panel of any type, pattern and shape Aluminium Composite Panel, aluminium thickness of 0.5mm, Front side finish of aluminum roll coated with plain / coloured / wooden texture PE / PVDF, core material of non-toxic polyethylene, Macromolecular lamination film, Rear side of Aluminum coated with primer and including frame work using of fasteners, including concealed screws, nuts, bolts and other items required for connecting aluminium to aluminium/steel/wooden/ply board, blind rivets all fixing anchors, brackets and similar attachments used in the erections, shall be of aluminium, non-magnetic stainless steel, zinc coated steel, for fixing in both internal / external wall cladding complete weather proofing sealant of a polyurethane elastic joint / structural silicone sealant/ pre-formed gaskets to the horizontal & vertical Joints in the Aluminium cladding / facade as per manufacturer instructions. and removal of old wooden ply board of any thickness complete all as specified and directed. Note : 1. The unit rate quoted is deemed to be inclusive of all necessary fixing accessories mentioned in the description of item and use of scaffolding works at any height for installation. 2. For payment purpose panels areas will be measured on one side only.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as specified and directed.

Material and labour for light shade vitrified coloured Ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match inluding Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes complete all as specified.

Material and labour for light shade vitrified coloured Ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in vertical surfaces such as skirtings and dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed.

Material and labour for Non Skid coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed/bedding layer in CM (1:6) complete all as specified and directed.

Material and labour for digital coloured glazed ceramic tiles 300x450x7mm thick in vertical surfaces (including designed borders) such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match over rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed. Note:- Rate of Designer border Tiles in vertical surface is deemed to be included in unit rate quoted.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site complete all as specified and directed.

Material and labour for granite (of any colour) 20 mm thick machine cut, machine polished, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone as in kitchen platform, flooring, etc and all other similar works laid over and including 15mm thick screed bed/bedding layer in CM (1:6) complete all as specified and directed.

Demolition of cement concrete in ground floor not exceeding 15cm thickness (below or above ground level) and removing the demolished material and debris out side MD land complete all as specified and directed.

Material and labour for 75 mm PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in plinth protection complete all as specified and directed.

Material and labour for 75 mm thick cement concrete type C-2, (1:3:6) 20 mm graded aggregate) as in floor, subbase and all other similar works complete all as specified and directed.

Material and labour for 75 mm thick cement concrete type D-2, 1:4:8 (40 mm graded aggregate) as in flooring/road subbase and all other similar works complete all as specified and directed.

Material and labour for Dura tile, heavy paving, square / rectangular 395x395 mm, digital matte finished in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes complete all as specified and directed.

Material and labour for preparing new wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel painting over and including one coat of pink primer complete all as specified and directed.

Material and labour for preparing old wooden surfaces of any description not otherwise described over 10cm in width or girth and applying one coats of synthetic enamel painting complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description not otherwise described over 10cm in widht or girth and applying two coats of synthetic enamel paint over a coat red oxide, zinc chrome primer complete all as specified and directed.

Taking down Chowkhats or frames with shutters (without taking of shutters from the frame) exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as specified and directed.

Taking down Chowkhats or frames with shutters (without taking of shutters from the frame) not exceeding 1.50 Sqm each complete all as specified and directed.

Supply and fixing 30 mm thick flush shutters, solid core construction, with block board core and plywood face pannels, one side commercial type and other side covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

Supply and fixing for 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed.

Material and labour for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, and treating ends of posts, back of chowkhats, etc area tarred exceeding 0.1 sqm but not exceeding 0.5 sqm each and treated with tar or coal tar black paint complete all as specified and directed.

Material and labour for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, treating small articles such as holdfasts,end of posts, backs of chowkhats, etc area not exceeding 0.1 sqm each and treated with tar or coal tar black paint complete all as specified and directed.

Material and labour for PCC (1:3:6) type C1 (20 mm graded aggregate) as in bed blocks for hold fast and all other similar works including necesssary formwork complete all as specified and directed.

Supply and fixing mild steel flat iron as in hold fast clamps and all other similar works conforming to Fe 290 Gde -E-165 complete all as specified and directed.

Supply and fixing anodised aluminium frame / shutter for door, window, and ventilator of any type including sliding/hunge type all as directed with one more rebates including fabrication of frame/shutters and fixing to wall with necessary lugs, cleat etc including all accessories such as glazing clips and rubber beading for fixing of glass panes, hinges, handles etc complete all as specified and directed (glass panes will be measured and paid seperately).

Material and labour for anodised aluminium window and ventilator shutter, louvers type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and frosted glass panes of louvers complete all as specified and directed.

Supply and fixing double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part made of steel heavy duty and fixed in position complete all as specified and directed.

Supply and fixing 100 mm butt hinges medium weight cold rolled stainless steel complete all as specified and directed.

Supply and fixing anodised aluminum barrel tower bolts of extruded section 200mm long complete all as specified and directed.

Supply and fixing aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and directed.

Supply and fixing 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Supply and fixing in repair 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Supply and fixing extruded aluminimum alloy handle fabricated type of 150mm long complete all as specified and directed.

Supply and fixing Aluminum deco grill Cat No -104, 6mm thick, cut to required size/shape and fixed in position with aluminium bedding T/F section complete all as specified and directed.

Material and labour for aluminum alloy wire cloth 0.45mm nominal dia and average width of aperture 1.40mm and fixed with aluminium wire stapples etc complete all as specified and directed.

Supply and fixing sheet glass 5.50 mm thick frosted glass not exceeding 0.5 sqm in each pane and fixed with rubber beads complete all as specified and directed.

Supply and fixing sheet glass 5.50 mm thick ordinary quality in square not exceeding 0.5 sqm in each pane and fixed with rubber beads complete all as specified and directed.

Supply and fixing sheet glass 5.50 mm thick ordinary quality in square exceeding 0.5 sqm in each pane and fixed with rubber beads complete all as specified and directed.

Material and labour for floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 140 mm, complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Material and labour for pre-painted galvalume hot-dip aluminium-zinc alloy metallic coated profile steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick of a colour having yield strength of 550 Mpa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and directed.

Supply and fixing Polycabonate roof sheeting 10-12 mm thick (any Colour) hollow sheet, corrosion resistant, temper proof, durable coating, water proof sheet fixed with water proof fastening accessories, Aluminium foil tape, aluminium U profile, water proof tape, coach screw and washer in roof, wall etc complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

Supply and fixing of UPVC rain water gutter having an size of 150mm and thickness of 8 mm and fixed at walls with help of MS bracket at spacing of 1000mm at any height and inclusive of scaffolding complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Supply and fixing mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

Supply and fixing 300mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified and directed.

Supply and fixing 100 mm butt hinges extruded aluminium alloy with galvanized mild steel hinges pin anodised type `C'-22 complete all as specified and directed.

Supply and fixing 18 to 19 mm prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cup borad & kitchen cabinet shutters and all other similar works complete all as specified and directed.

Supply and fixing 75 mm butt hinges, medium weight, cold rolled stainless steel complete all as specified and directed.

Supply and fixing 40 mm dia, cupboard knobs fixed with nuts screws and washers of brass, polished complete all as specified and directed.

Resecuring or easing and adjusting, without taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm complete all as specified and directed.

Supply and fixing sheet glass, ordinary quality, 3.0 mm thick, frosted and glazed with oil putty or fixed with rubber beading in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

Supply and fixing 20mm dia decorative type curtain rods chromium plated anodised aluminium complete all as specified and directed.

Supply and fixing 20mm dia decorative type fancy type brackets made of brass complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed,15 mm dia bore complete all as specified and directed

Fixing only old 15 mm steel tubing and including cleaning in positon (walls, ceiling and floor), threading etc complete all as specified and directed

Supply and fixing GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed

Material and labour for cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting not exceeding 10cm girth complete all as specified and directed.

Supply and fixing in repair vitreous China wash down water closet pan (pedestal pattern) white, including trap, connection to drain and flushing pipe including seat cover for pedstal pan complete all as specified and directed. Make : Cat Part No S1050102 of Cera or Equivalent in Hindware / Parryware.

Supply and fixing vitreous China wash down water closet pan (pedestal pattern) white, including trap, connection to drain and flushing pipe including seat cover for pedstal pan complete all as specified and directed. Make : Cat Part No S1050102 of Cera or Equivalent in Hindware / Parryware.

Supply and fixing in repair vitreous China wash basin white, flat back,size 580X450 mm including cutting for pinning in ends of brackets, complete all as specified and directed. Make : Cat Part No S2040139 of Cera or Equivalent in Hindware / Parryware.

Supply and fixing vitreous China wash basin white, flat back,size 580X450 mm including cutting for pinning in ends of brackets, complete all as specified and directed. Make : Cat Part No S2040139 of Cera or Equivalent in Hindware / Parryware.

Supply and fixing in repair vitreous China squatting pan, Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) complete all as specified and directed. Make : Cat Part No S3010104 of Cera or Equivalent in Hindware / Parryware.

Supply and fixing in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed. Make : Cat Part No B1010106 of Cera or Equivalent in Hindware / Parryware.

Supply and fixing 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed. Make : Cat Part No B1010106 of Cera or Equivalent in Hindware / Parryware.

Supply and fixing in repair 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 204 or Equivalent of JAQUAR/PARKO

Supply and fixing 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 204 or Equivalent of JAQUAR/PARKO

Supply and fixing in repair 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions. Make:- ESS ESS CROMA Cat Part No C 206 or Equivalent of JAQUAR/PARKO

Supply and fixing 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions. Make:- ESS ESS CROMA Cat Part No C 206 or Equivalent of JAQUAR/PARKO

Supply and fixing in repair PVC connection 15mm size PTMT nuts of length 450 mm complete all as specified and directed.

Supply and fixing PVC connection 15mm size PTMT nuts of length 450 mm complete all as specified and directed.

Supply and fixing in repair 15 mm bore fancy type bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule with wall flange complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 203 or Equivalent of Jaquar/ Parko.

Supply and fixing 15 mm bore fancy type 2-in-1 bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule with wall flange complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 203 or Equivalent of Jaquar/ Parko.

Supply and fixing in repair 15 mm bore fancy type health faucet with SS connection pipe one metre long complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 232Y or Equivalent of JAQUAR/PARKO.

Supply and fixing 15 mm bore fancy type health faucet with SS connection pipe one metre long complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 232Y or Equivalent of JAQUAR/PARKO.

Supply and fixing in repair fancy type CP Towel Rail 61 cm long complete all as specified and directed. Make : ESS ESS CROMA Cat Part No C 412 or equivalent of Jaquar/ Parko.

Supply and fixing fancy type CP Towel Rail 61 cm long complete all as specified and directed. Make : ESS ESS CROMA Cat Part No C 412 or equivalent of Jaquar/ Parko.

Supply and fixing in repair CP Towel Ring complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No AC 502 or Equivalent of Jaquar/ Parko.

Supply and fixing CP Towel Ring complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No AC 502 or Equivalent of Jaquar/ Parko.

Supply and fixing in repair CP soap dish complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 414 or Equivalent of Jaquar/ Parko.

Supply and fixing CP soap dish complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 414 or Equivalent of Jaquar/ Parko.

Supply and fixing in repair CP toilet paper holder complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No AC 206 or Equivalent of Jaquar/ Parko.

Supply and fixing CP toilet paper holder complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No AC 206 or Equivalent of Jaquar/ Parko.

Supply and fixing CP Towel Bracket (61 CM) long complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 423 or Equivalent of Jaquar/ Parko.

Supply and fixing in repairs sheet glass corner shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

Supply and fixing sheet glass corner shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

Material and labour for 15 mm bore fancy type wall mixer with 115 mm long bend pipe for connection to overhead shower (with bush and piston Divertor fittings) with aerator complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 216 or Equivalent of Jaquar / Parko.

Supply and fixing 15 mm bore overhead shower single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 240 mm long (light weight) round shape with wall flange complete all as specified and directed. Make:- ESS ESS CROMA Cat Part Not OH 107A or Equivalent of Jaquar / Parko.

Supply and fixing in repair grating square 150mm size of PTMT (minimum 100 gms) complete all as specified and directed.

Supply and fixing grating square 150mm size of PTMT (minimum 100 gms) complete all as specified and directed.

Supply and fixing in repair 15 mm bore piller taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type, high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 201 or Equivalent of JAQUAR/PARKO.

Supply and fixing 15 mm bore piller taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type, high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 201 or Equivalent of JAQUAR/PARKO.

Supply and fixing in repair water closet seat cover any coloured pattern with flat bottom and mild steel chromium plated or aluminium hinging devices complete all as specified and directed.

Supply and fixing water closet seat cover any coloured pattern with flat bottom and mild steel chromium plated or aluminium hinging devices complete all as specified and directed.

Supply and fixing vitreous china, bowl urinal flat back, size : 465 x 355 x 265mm white (min) with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing anf fixing plugs, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement mortar (1:2) (excluding fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

Supply and fixing urinals spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum wt 60 gms) fixed in position complete all as specified and as directed.

Demolition and breaking up drain pipes 75 mm dia (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar upto 04 storeys height of bldgs including use of scaffolding arrangments complete all as specified and directed.

Demolition and breaking up drain pipes 110 mm dia (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar upto 04 storeys height of bldgs including use of scaffolding arrangments complete all as specified and directed.

Supply and fixing 75 mm bore PVC pipe stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts & nuts and securing ends of stay to wall or roof including use of scaffolding to work at any height of bldgs complete all as specified and directed.

Supply and fixing 100/110 mm bore PVC pipe stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts & nuts and securing ends of stay to wall or roof complete all as specified and directed.

Supply and fixing 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls upto 04 storeys height of bldgs including use of scaffolding arrangments complete all as specified and directed.

Supply and fixing 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls upto 04 storeys height of bldgs including use of scaffolding arrangments complete all as specified and directed.

Supply and fixing 75mm dia PVC (SWR) bends with access doors any radius at any height of bldgs including use of scaffolding complete all as specified and directed.

Supply and fixing 110 mm dia PVC (SWR) bends with access doors any radius at any height of bldgs including use of scaffolding complete all as specified and directed.

Supply and fixing 75 mm dia PVC (SWR) vent cowl at any height of bldgs including use of scaffolding complete all as specified and directed.

Supply and fixing 110 mm dia PVC (SWR) vent cowl at any height of bldgs including use of scaffolding complete all as specified and directed.

Supply and fixing in repair 75 mm dia PVC(S WR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

Disconnecting and dismantling of existing water tanks of any capacity and any description, shifting and refixing and reconnecting to its original position after completion of water proofing treatment of roof complete all as specified and directed.

Material and labour for cement concrete Type B1 (1:2:4), 20 mm graded stone aggregate as in padding concrete on RCC roof surfaces and all other similar works complete all as specified and directed.

Material and labour for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particles and applying one coat of bituminous primer @ 200 gms per sqm and then laying 3 mm thick APP modified bituminous membrane weighing not less than 3.00 kg/sqm reinforced weighing not less than 150 gms/sqm laid by torch application method overlap while torching shall be 75 mm on length and 100 mm width side including taking down of existing treatment complete all as specified and directed.

Taking down carefully copper / aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white / colour wash to match with existing surfaces etc complete all as specified and directed

Taking down carefully copper / aluminum submain wiring any type/ any size complete including all fixtures such plug sockets box etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white / colour wash to match with existing surfaces etc complete all as specified and directed.

Material and labour for point wiring concealed type and including rigid non-metallic PVC heavy duty conduite of 20/25 mm dia size, cutting chases for sinking for concealed PVC conduit and boxes for wiring with 1.5 sqmm FRLSH PVC insulated, unsheathed, multi stranded copper conductor cable single core, 1100 volts grade with flush type metal boxes suitable for fixing switches, sockets and fan regulator etc., white or any colour cover plate with brass screws and cup washers including PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm as an earth wire connected to common earth and earth dolly as per IS specification and as specified in SSR Part-I complete for one light point controlled by one switch, making good to the disturbed surfaces to match the existing surfaces (fill up cement in gaps, finishing with putty and apply two coats of paint, match with existing colour in disturbed surface area) complete all as specified and directed.

All as per serial no. 141 here-in-before but for one ceiling fan controlled by one switch and regulator complete all as specified and directed.

All as per serial no. 141 here-in-before but for one 3 pin socket point 5 Amps on independent board complete all as specified and directed.

All as per serial no. 141 here-in-before but for one 3 pin socket point 5 Amps on same board complete all as specified and directed.

All as per srl item no 141 here-in-before but for one socket point 15 Amp with 2.5 sq mm PVC unseathed FRLSH wire along with 2.5 sq mm green colour wire as earth contuinity conductor connected to common earth dolly complete all as specified and directed.

Supply and fixing sub main wiring, concealed type, with two run of 10 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 10 sqmm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduite of adequate size (not less than 25 mm dia) for housing the wires for from Panel / Main DB to house SPN DB complete all as specified and directed. Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Mode of measurement two runs of 10 sqmm cable and one run of 10 sqmm cable with PVC conduite shall be measured as one length.

Supply and laying sub main wiring, concealed type and including rigid non-metallic PVC heavy duty conduite of 25 mm dia size, cutting chases for sinking for AC Point with two run of 4 sqmm stranded copper conductor with one run of 4 sqmm stranded copper conductor as earth continuty conductor connected to common earth dolly including taking out of old unserviceable sub main wiring of any size complete all as specified and directed. Note: Mode of measurement two runs of 4 sqmm cable and one run of 4 sqmm cable shall be measured as one length.

Supply and fixing in repairs switch piano, flush type single pole, one way 5 Amp complete all as specified and directed. Make: Anchor (Roma) / Fine / SSK.

Supply and fixing switch piano in repairs, flush type single pole, one way 15 Amp complete all as specified and directed. Make: Anchor (Roma) / Fine / SSK.

Supply and fixing socket in repairs, 2/3 pin 5 Amp complete all as specified and directed. Make: Anchor (Roma) / Fine / SSK.

Supply and fixing socket in repairs, 6/16 A 2/3 pin complete all as specified and directed. Make: Anchor (Roma) / Fine / SSK.

Supply and fixing in repairs stepped type electronic fan regulator 450 watt flush type on the existing phenolic laminated sheet etc complete all as specified and directed. Make: Anchor (Roma) / Fine / SSK.

Supply and fixing in repairs ceiling rose surface bakelite 65 x 50 mm two to three terminals complete all as specified and directed. Make: SSK / Anchor / Kinjal / Fine.

Supply and fixing 20 watt LED in repair, 4 feet long fixed on pvc square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed. Make : Havells cat pt no LHEXBXPNIN1W020 equivalent model in Wipro model no - D-532065-1 /philips model No - BN150W LED 20S-6500 PSE ODGR.

Supply and fixing LED 36 Watt fitting in repair, minimum 110 Lumin per Watt, recessed mounted, full glow, slim type, of size 60 cm x 60 cm square type, with electronic driver of same make connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0 20mm and necessary fixing arrangement complete all as specified and directed. Make - Havells (Cat part No - ENDURASLIMPROPLUS2X2 PLR36WLED840MOD) or equivalent model of Wipro Model No LM25-361-XXX-65-G1** / Philips Model No - RC380BLED 34S-6500 L60W60PSDOD-51

Supply and fixing MCB SP, in repair, 240 volt, 6 to 32 Amps complete all as specified and directed.

Supply and fixing MCB SPN, in repair, 240 volt, 40 Amps complete all as specified and directed.

Supply and fixing in repairs fixing sheet metal enclosures for DBs when MCBs to be used 240 volts 12 way, double door with 200 Amps rated bus bar single pole and neutral and including copper lugs / thimbles duly crimped for connection and cutting chases on wall suitable for concealed type DB and including with making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area), complete all as specified and directed. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB.

Supply and fixing in repairs MCB DB TPN 6 way double door, with 125 Amp MCCB, 16 KA, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032, with 200 Amp rated bus bar 415 volts powder coated painted complete all as specified and directed.

Supply and fixing in repairs Sheet metal enclosure SPN with a two pin and earth plug and socket with one 20 Amps MCB complete all as specified and directed. Make : Legrand / Havells.

Material and labour for in repair earthing complete with galvanised steel plate earth electrode 600 X 600 X 6mm thick buried directly in ground (earth pit not less than 2.25 meter below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected with using 25 x 4 mm galvanized MS strip at two points by means of bolts and nut, check nut and washers including charcoal dust, common salt, necessary excavation in soft/loose soil, returning filling in and removal of surplus soil to a distance up to 50metres, PCC pit in 1:3:6 type CI, using 20mm grade stone aggregate and MS angle iron frame 40 x 40 x 6mm, RCC 1:2:4 type B-1 using 20mm grade stone aggregate, 40 mm thick pit cover, reinforced with 6mm dia TMT bars 75 mm centre to centre both ways, MS handle 12 mm dia, PGI funnel, wire mesh and GI pipe of 20 mm bore (medium grade) and earth strip protection pipe 40mm bore (medium) and shown in electrical plate No. 3 of SSR Part-I including testing complete all as specified and directed. Note:- GI strip and protection pipe up to 7.5 metre beyond the earth plate electrode is included in unit rate quoted.

Material and labour for earthing in repair, with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth lead of 4mm dia GI wire by means of bolts, nuts, check nuts and washers of galvanised iron. Earth wire protected by GI pipe 15mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as specified and directed.

Supply and fixing / laying cable in repair PVC insulated screened PVC bedded, unarmoured, sheathed, electric power cables 1100 volts grade with stranded copper conductor of size 1.5 Sqmm 3 core with non metalic PVC FR, heavy duty conduit of suitable size (20mm dia or more), with shaddle complete all as specified and directed Note: Mode of measurement 1.5 Sqmm 3 core cable with PVC conduite shall be measured as one length.

Supply and fixing in repair LED building security light fitting 45 Watt, luminaire fixture in IP 66 protection level output of LED lamp efficiency minium 100 lumen per watt after all losses , pressure die-cast aluminium housing LED Street light complete with GI clamp including connected accessories and bracket made of GI Pipe 50mm dia light grade 1.25 m long, bend to shape with two sets of MS flat iron clamps, nuts, bolts, washers etc. complete all as specified and directed. Make Philips : cat pat No BRP409 LED060HENRPC S1PSU GR or equivalent in Wipro cat part No LR02-501-XXX-57-XX / Havells cat part No ENDURACITYLINERNEXGENSL 45WLED757 SASYBOPC.

ASHOK CONSTRUCTION

RAJU AND CO

GANGAJAL

Vandan Enterprises

Bidder Name

ASHOK CONSTRUCTION

Vandan Enterprises

RAJU AND CO

PRABHU ASSOCIATES

GANGAJAL