Karimangalam Block - Repairs to RCC Anganwadi Building at A.Sappanipatti H-o Adilam

Repairs to RCC Anganwadi Building @ A.Sappanipatti H/o Adilam

Chipping the concrete and roughing the surface Hall ceiling Verandha Ceiling Store

Dismanling weathering course with pressed tiles Roof Top

Providing Flooring with gronolythic pattern cc1:2:4 using 25mm chips ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete Hall ceiling

Paving the top of roof with Solar reflective Tiles of approved quality Colour and laid Cm 1:3 12mm thick and pointed with tile grout including cost and conveyance of all site etc complete Roof Top

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work. Hall ceiling Verandha Ceiling Store

Distempering the old walls and ceiling one coat with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying withstandard specification and as directed by the Departmental Officer Hall Inner alround Store Inner alround Verandha wall three sides Front Sunshade bottom Deduct Door Deduct Windows

Re Painting the walls with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) S I No 358 wall outer alround Parapet top and inner Front Sunshade top Window Sunshade Top and Bottom Deduct Front Open D/F for Windows

Painting the old iron works two coats with syntactic enamel paint of approved quality and colour including ordinary scraping using brushes and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) Door Windows

Provision for Rainwater Pipe