SPECIAL REPAIR TO BLDG NO P-335 341 345 AND 66 CIV MD ACCN AT EBS BABUGARH PROVN OF WATERING TROUGH WITH RUNNING WATER SUPPLY FOR ARMY ANIMALS AT 32 MIL VET HOSP CL-I AND PROVN OF 01 X SEPTIC TANK AND SOAKAGE WELL FOR 25 USER ADJACENT TO BLDG NO E-14

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc complete all as specified and directed.

M&L for brick work with sub class B, bricks old size, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for brickwork old sizewith subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified and directed.

Demolition of cement concrete of ground floor n exc 15 cm in depth in any position nototherwise specifically provided for complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base flooring all as specified complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cemnt to match including 15 mm th screed bed in cm 1:6 complete all as specified and directed.

S&F for non skid coloured ceramic tiles coloured of 7 to 8 mm (squre/ rectungular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed with white or coloured cement over 15mm screed bed in CM 1:6 complete all as specified and directed.

S&F for non skid coloured ceramic tiles coloured of 7 to 8 mm (squre/ rectungular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F Coloured Glazed colour ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) joint free with grout of matching shade complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortor etc complete all as specified and directed.

M&L for 16-18mm thick black granite stone slab machine cut in cooking platform, jams, pillars, windows cills and the like laid over and including 15mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.

M&L for 16-18mm thick black granite stone slab machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.

M&L for machine cut prepolished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing upto Granite finish complete over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for machine cut prepolished kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing upto Granite finish complete factory made bull nosed as in riser of steps, skirting/dadolaid over 10mm thick in cm 1:4 complete all as specified and directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqm each complete all as specified and directed.

S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed.

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed.

S & F Factory made solid wire gauzed PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing wire gauzed i.e. panel will be of wire gauze in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly supplied and fitted to chowkats complete all as specified and directed..

S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: stainless steel butt hinges and necessary S S screws shall be paid separately

S&F powder coated anodised aluminium windows sliding type (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 4.00 mm thick plain glass complete all as specified and directed.

S&F powder coated anodised aluminium ventilators with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 4.00 mm thick frosted glass complete all as specified and directed.

M&L for repairs 18/19mm thick Soild MDF board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with screws to MDF frame work in cup boards, rebated or flat edged fancy handle , Magnite lock complete all as specified and directed.

M&L for framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified and directed.

M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel (by spraying) over one coat of primer complete all as specified and directed.

S & F 30 mm flaps Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F 125mm size aluminium alloy handles cast type anodized complete all as specified & directed.

S&F 150mm size aluminium alloy handles cast type anodized complete all as specified & directed.

S&F aluminium anodised tower bolts 150mm long, of extruded section complete all as specified and directed.

S&F aluminium sliding bolt 300 long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F heavy weight butt hinges 100mm in size complete all as specified and directed.

S&F aluminium anodised barrel tower bolt with bright bolt 200 mm long complete all as specified and directed.

S&F 1.00 mm th.mild steel, plain, black sheet in hearths; covering to Manhole cover covering to door chowkats (frames); chullah hoods; water tanks; water troughs: ducts; urinal trought and funnels etc cut to size edges beads, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/ riveted seanes including bending turning up mitred engles, stopped ends, outlets, etc. as required complete all as specified and directed.

S&F mild steel 150mm size helical door spring including roller and roller plate fixed with screws to wooden chowkat or welded to steel frame, complete all specified and as directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for applying 15 mm thick rendering using ready mix plaster bags on brick / concrete surfaces of internal walls finished even and smooth as per manufacturer instructions, complete all as specified and directed. Note:- Water proofing compound shall be measured and paid sepratly

M&L for rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified and directed.

M & L for applying 15 mm thick rendering using ready mix plaster bags on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound 200ml by weight of 50 kg cement bag or as per manufacturer instructions, complete all as specified and directed. Note:- Water proofing compound shall be measured and paid sepratly

M&L for 1 coat of prime using roller complete all as specified and directed.

M&L for Two coat of OBD and two coat putty using roller for painting complete all as specified and directed

M& L for preparing plastered new surfaces of ceiling and applying three coats of white wash on ceiling surface complete all as specified and directed.

M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm and two coat putty using roller for painting complete all as specified and directed.

Demolition of reinforced concrete of any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition) complete all as specified and directed.

M&L for form work to sides and soffits of beams lintels etc finished rough complete all as specified and directed.

M & L for RCC 1:2:4 Type B1 using 20 mm graded stone aggregate as in beams, lintels over 1.5 m span etccomplete all as specified and directed.

M & L for precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggegrate) as in Chullah hood chajja and manhole cover, kitchen shelves etc set in cement mortar 1:4.including all neccesary formwork & finishing exposed concrete surface complete all as specified and directed.

Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and poining ein cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc complete all as specified and directed.

S&F mild steel TMT bars No 500D 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.

All as described item no 49 here-in-before but 6 to 8 mm dia complete all as specified and directed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site all complete all as specified and directed.

All as described item no 51 here-in-before but 20 mm bore pipe complete all as specified and directed.

Supplying and laying of 20mm bore galvanized iron tubes medium grade with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of 25mm bore galvanized iron tubes medium grade with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed.

Dismantling OH water tank of capacity exc 250 ltr but not exceeding 500 ltr and removing from site complete all as specified and directed.

S&F triple layer white color 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and incl dismantling water tanks any type & removing complete all as specified and directed.

S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs bib taps brass cromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repairs 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union complete all as specified and directed.

S&F in repairs of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed.

S&F in repairs Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed.

S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed.

S&F in repairs ,PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs chromium plated shower rose 125mm size complete all as specified and directed.

S&F in repairs CP soap dish complete all as specified and directed.

S &F CP grating doom 100mm dia complete all as specified and directed.

S&F in repairs 75mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste and S&F powder coated aluminium frame and stainless steel ring to hold 110/75mm pipes in place at 1.5 mtr c/c to be fixed to wall as per site requirement complete all as specified and directed.

S&F in repairs 110mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste and rain water pipes and S&F powder coated aluminium frame and stainless steel ring to hold 110/75mm pipes in place at 1.5 mtr c/c to be fixed to wall as per site requirement complete all as specified and directed.

S&F PVC bends 75mm bore, any radius complete all as specified & directed.

S&F PVC bends 110 mm bore, any radius complete all as specified & directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F 110 PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repairs Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia fixed in repair to complete all as specified and directed.

S&F in repairs Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 25 mm dia fixed in repair complete all as specified and directed.

S&F 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair complete all as specified and directed.

S&F 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed.

S&F 15mm dia chromium plated fancy type sink mixer with swinging spout (wall mounted model) fixing and connection to pipes complete all as specified and as directed.

S&f in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F fancy type glass corner fancy type of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.

S&F in repair chromium plated towel rail 20mm dia D type 600 mm long as a approved quality complete all as specified and directed.

S&F waste pipe any type of pipe 32mm bore suitable for wash hand basins/sinks complete all as specified & directed

S & F 25mm dia Stainless steel decorated curtain rod with braket and ring complete all as specified and directed.

S&F Hand rails MS , half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 GDE Fe 410-W(Gde-E-250)quality B complete all as specified and directed.

M&L for dubbing out average 20mm thick on irregular faces of walls and ceilings CM 1:4 complete all as specified and directed.

Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.

M&L for 10mm thick cement paster in CM 1:4 mixed with WPC @ 2 % by weight of cement finised even and smooth without using extra cement on roof surface when concreate is green and wall (WPC will be measured and paid seperately as supply only rate) complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M & L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface conforming to IS-3384@ 0.30 ltr/sqm nd one coat of bonding material using blown type bitumen grade 85/25 @1.20kg/sqm by forced application and one coat of aluminium paint complete all as specified and directed.

M & L for repairs to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor.) (Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggragate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work complete all as specified and directed.

M&L for laying 75mm thick PCC 1:2:4 TYPE B-1 (using 20mm graded crushed stone aggregate) as in floor to receive topping layer complete all as specified and directed

S &F in repair for Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

M&L for 15mm thick rendering on Brick masonary wall surfaces in CM 1:4 mixed with water proofing compound finised even and smooth with using extra cement complete all as specified and directed

M&L for 150mm dia Salt - glazed stoneware drain pipes laid in trenches and jointed as specified internal diiameter of pipe 150mm including demolition, removal from site upto 3.0 Km as directed by engineer in charge and breaking up drain pipe salt glazed stone ware complete all as specified and directed

M & L for PCC ( 1 : 4 : 8 ) Type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed

M & L for concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 for 150 mm dia pipe work in foul position complete all as specified and directed

Demolition of PCC of any description and in any position not otherwise specifically provided for drain etc including removing the same where directed complete all as specified and directed

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including finishing the top of benching even and smooth using extra cement (forming channel shall be measured and paid for separately complete all as specified and directed

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150mm pipe complete all as specified and directed

M& L for preparing plastered new surfaces of wall and applying three coats of white wash on wall surface complete all as specified and directed

M&L for 75 mm thick cement concrete 1:4:8 type C-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed

M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground in concrete complete all as specified and directed

Dismantling fencing wire mesh, any type complete all as specified and directed

S&F Hand rails MS , half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe 290-0 GDE Fe 165 complete all as specified and directed

Supply only Chain link mild steel galvanized fencing made up into mattress or cages etc complete all as specified and directed.

Fixing only chain link fencing any mesh, size and type to any type of standard, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S&F mild steel bolts.Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long and n .exc12mm dia complete all as specified and directed.

Supply only Mild steel bars 10mm dia round bar complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description exceeding 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M & L for cement concrete 1:3:6 type C2 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 Mts wide and not exceeding 10 Sqm on plan area and not exceeding 1.5 m deep in Soft/Loose soil complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

S&F Roof trusses Fe 410-W(Gde-E- 250) quality-A (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel, or flat sec) incl gusset plat,distance pieces cleats etc including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet(AZ 150) 0.50mm thick having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based plain steel sheet (AZ 150) 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding (eaves board) to wall fixed with self tapping screws complete all as specified and directed.

M&L for broken bricks, hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded aggregate) in foundation, filling and mass concrete complete all as specified and directed.

S&F Polythene film, black, 50 micron laid in floors all as specified and directed.

M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and directed.

Finishing surface of concrete roads, pavements, brooming and lining as required complete all as specified and directed.

M&L for 15mm thick rendering on brick masonry wall surfaces in CM 1:4 finished even and smooth with using extra cement complete all as specified and directed.

M&L for preaparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

S&F tubes, medium grade, 25mm bore, galvanised with all fittings complete to walls and laid in floors complete all as specified and directed.

M&L for 200mm bore of reinforced concrete pipe class NP3 laid in trenches and jointed with collar complete all as specified and directed.

M&L for Concrete bed to drain pipes of size 200 mm bore packing under and haunching against the sides of pipes after they are laid and fitted in cement concrete,Type C2, 1:3:6, using 40 mm graded stone aggregate complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 on brick / concrete other than fair surfaces finished even and smooth without using extra cement including mixing water proofing compound as per Manufacturer's instructions complete all as specified and directed Note: Water proofing compound shall be measured and paid separately.

M&L for PCC 1:2:4, Type B–1, using 20mm graded stone aggregate as in Surface Channels and Drain etc.complete all as specified and as directed.

Extra for forming fair finishing drain or channel 90cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L for construction of septic tanks for 25 users, foundation in PCC 1:2:4, brick work in cement mortar 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fiber reinforced cover with angle iron frame Vent shaft and sludge chambers etc. including necessary earth work in any type of soil (soft/loose/hard/dense) all as shown on drg No TD-217 sheet No 17/ to 7/7 complete all as specified and directed.

M&L for construction of Soakage wells of size 2.40m dia & 4.5m depth ( effective depth 4.5 m ) in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 RCC including intercepting chamber, screen chamber Brick work in cement mortar 1:4, RCC cover slab in M-25/ RR masonry / Filling with brick bats, all as including necessary earth work in any type of soil (soft / loose / hard / dense) all as shown on drg No TD-309 Sheet Nos 1/4 to 4/4 complete all as specified and directed.

Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed

M&L for concealed point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS conforming to IS: 694-1990 PVC insulated, sheathed copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, sheathed and connected to common earth and earth dolly in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc,suitable for modular fixtures including suitable modular box, base plate and outer plate including making good to walls, ceiling etc including white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified and directed

All as described srl item no 138.00 here-in-before but one light/fan/exhaust fan/bell/buzzer point controlled by one, one way 6 Amps switch/bell push button, complete all as specified and directed.

All as described srl item no 138.00 here-in-before but one 3 pin 5/6 amps socket outlet point on Same board, controlled by one, one way 5/6 amp switch.

All as described srl item no 138.00 here-in-before but one 3 pin 5/6 amps socket outlet point on independent board, controlled by one, one way 5/6 amp switch.

M&L for concealed point wiring with 2.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS conforming to IS: 694-1990 PVC insulated, sheathed copper conductor cable including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, sheathed and connected to common earth and earth dolly in and including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc,suitable for modular fixtures including suitable modular box, base plate and outer plate including making good to walls, ceiling etc including white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified and directed.

All as described srl item no 142.00 here-in-before but one 3 pin socket outlet, 16 amps, with cables 2.5 sqmm size on independent board, controlled by one, one way 15 amp switch complete all as specified and directed.

M&L for sub main wiring with 6 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable, drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, PVC conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing & including taking down old unservicable submain complete all as specified & directed. Note:-One meter of conduit along with 2x6 sq mm wire and one 6 sq mm earth shall be measured as one unit length.

S&F Modular Switch, 1 Module, 6A, AC, 240V, one way complete all as specified and directed.

S&F Modular Socket, 2 Module, 6A, 2/3 pin combined, AC, 240V, one way ISI Marked and as specified.

S&F Modular Switch, 1 Module, 16A, AC, 240V, one way complete all as specified and directed.

S&F Modular Socket, 2 Module, 6A / 16A, 2/3 pin combined, AC, 240V, one way complete all as specified and directed.

S&F ceiling rose, surface type, bakelite, 65 x 25 mm, three terminal complete all as specified and directed.

S&F sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.

S&F MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

S&F in repair Isolator DP, 40A, AC, 240V, complete all as specified and directed.

S&F lamp holder (Angular / Straight), insulated body, with back plate complete all as specified and directed.

S&F Led lamp 9/10 watt complete all as specified and directed.

S&F LED tube light fitting T/5 surface mounting poly carbonate 240 volts 20 watts, 6500K complete all as specified & directed.

S&F water heater storage type , electric capacity 25 Ltrs BEE 5 star rated complete all as specified and directed.

S&F exhaust fan AC single phase 230/240,metallic body of size 300mm sweep with louver complete all as specified and directed.

S&F 35/36 W, LED building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of 32 mm dia GI pipe medium grade upto 1.2 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting complete all as specified and directed.

S&F in repairs Modular Bell Push, 6A, 1 module, AC, 240V, ISI Marked, complete all as specified and directed.

S&F in repairs Call Bell, AC, 240V, SP, complete all as specified and directed.

S&F in repairs Modular Step Fan Regulator, 2 Module, 120W, AC, 240V, one way complete all as specified and directed.

Supply & Laying, jointing, testing and commissioning LT UG cable, PVC insulated, PVC sheathed armoured LT 1100 volt grades heavy duty with aluminium stranded conductor through pipes, induct, on poles, in trenches etc including taking down complete of size 35 Sqmm, 3.5 core complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft/ losse soil complete all as specified and as directed.

Supply and spreading clean fine dry river sand in trenches for cushioning of under ground cable/ cable duct complete all as specified and as directed. Note: Only punned thickness shall be measured for payment purpose complete all as specified and directed.

M & L for fly ash brick protection length of brick shall be laid across the length of cable complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soft/ losse soil complete all as specified and as directed.

S&F fan ceiling complete with blades, down rods, electronic regulator and accessories ,230V, 1200 mm sweep. BEE Five Star rated with Brushless direct current motor (BLDC) complete all as specified and directed.

Deepak Kumar Gupta (BID ID -3445598)

High Tech Metal India (BID ID -3440710)