Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 227 2 5TH B MAIN ROAD 2ND BLOCK HRBR LAYOUT KALYAN NAGAR BANASAWADI BANGALORE 560 043 | BENGALURU URBAN | KARNATAKA | 560043 | Admitted-Finance |
| 2 | Admitted-Finance 21 9TH MAIN 4TH CROSS GOWDAKEHOLA BAGALAKUNTE NAGASANDRA POST BANGALORE 560073 | BENGALURU URBAN | KARNATAKA | 560073 | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
20 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Yelahanka
GE (AF) Yelahanka Bangalore - 63
PROVISION OF PERMANENT STRUCTURES/BUILDINGS FOR DRIP/INGRESS PROTECTION TEST EQUIPMENT AT CQAE (WE) BANGALORE AND PROVISION OF INDUSTRIAL GRADE SOCKET FOR LAYER 2 SWITCH LOCATION (SDN) AT AFS YELAHANKA
2023_MES_579018_2
8150/E8
Open Tender
Civil Works
Item Rate
180 days
AF Stataion Yelahanka
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) Yelahanka
₹60,000
Yes
23 Mar 2023
1 Mar 2023
22 Mar 2023
1 Mar 2023
20 Mar 2023
8 Mar 2023
Amount
Surface Excavation n.exc 30 CM deep and averageing 15 CM deepand getting out in soft/loose soil .
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil.
All as per item No 2 above but depth of foundation exceeding 1.5m and not exceeding 3m and getting out in soft/ loose soil complete all as specified and directed.
Returning filling in including spreading, levelling watering and well ramming in layers not exceeding 25 cm all as directed
Removing Excavated surplus soil to a distance not exceeding 50m and depositing where directed at a level not exveeding 1.5 m abvoe the sterting point all as directed
M&L for plain cement concrete (PCC), type D-2,1:4:8 with using 40mm graded stone aggregate as in foundation, filling & mass concrete complete all as specified and directed.
M&L for precast cement concrete, type B1 1:2:4 (using 20 mm graded stone aggregate) block masonry with solid blocks exceeding 10cm in width and setting in cement mortar 1:6 complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing .
Ditto all as per item ser No 8 as above but size of TMT bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter and finished concrete flat.
M&L for formwork to sides of pillars, posts, struts, piers, columns, and stanchions of shape square, rectangular or polygonal for rough finished surfaces of concrete complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc and finished rough surfaces of concrete flat.
M&L for Formwork to chajja and finished concrete flat.
M&L for reinforced cement concrete M-25 Grade with using 20mm graded stone aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.
M&L for reinforced cement concrete M-25 with using 20mm graded stone aggregate in Columns, pillars, piers, posts and struts.
M&L for reinforced cement concrete M-25 with using 20mm graded stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span.
M&L for reinforced cement concrete M-25 with using 20mm graded stone agg in Chajja all as specified
M&L 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on external wall
M&L for Preparation of the new surfaces of walls plastered , and applying two cots of cement base paint , complete all as specified and as directed.
M&L 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls
M&L preparation of New wall surface and applying three coat of White wash all as specified and directed.
M&L for Mild steel work in tubular trusses/ purlines including special shaped washer etc complete in weldded tubes confirming to IS 1161-1979 grade St-240 including painted one shop coat of zinc chromate primer paint.
S & f plates (Plain or chequered) channels, square cut or notched (Ordinary and counter sunk) forming holes, with out any attachment Fe-410-w(Gde-E-250) all as specified.
M&L for Mild steel screw bolt diameter of shank 11 to 15mm (machine made) with hexoganal head at one end screwed the other or screwed both ends each screw end fitted with washers and one hexagonal nut, exc 05cm and not exc 10cm.
M&L for Painting of steel surface of any despcription, over 10 Cm in width or girth using two coat of synthetic enamel paint over a coat of red oxide primer duly prepared the new surface.
S&F of Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
Ditto - All as per item No 26 here in before but plain as in ridge,valley,gutters.
S&F of Framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165
M&L for hard core of guage 63mm deposited, spread and levelled to a true surface.complete all as specified and directed.
M&L Cement concrete 1:4:8, 75 mm thick, type D2 using 40 mm graded stone aggregate as sub base of floor .
M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & complete 15mm thick screed bed in CM 1:4 over 25mm thick PCC 1:2:4 type B0 (using 12.50mm graded crushed stone agg, all as spd & directed.
M&L 75 mm thick cement concrete type B-2,1:2:4(40 mm graded aggregate) for plinth protection .
S&F powder coated anodised aluminium frame and shutters with all fixing arrangements for doors, windows and ventilators with one or more rebates including joing cleat for fixing etc aluminium section of powder coating not less than 50 micron all as specified and directed.
S&F powder coated aluminium door/Windows/ventiliator shutters aluminium section weighing 0.55kg/m including necessary joining, fixed type, cleats, glazing clips, rubber neoprene packing, roller in each window, anodised alumnium snap beading, screw etc, complete all as spd.
S&F sheet glass ordinary quality 5mm thick as in doors,window, showcase alum frame work & similar work with or without glass roller any size including neoprime gasket all as directed by Engineer-in-Charge
S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm all as specified and directed. Note : Rate quoted by the contractor is inclusive of rate for fixing of wire cloth in steel & wooden windows/ ventilators with MS flat from 15 x 3mm and fixing of wire cloth in wooden shutters with 2nd class hard wood beading all as specified and directed .
S&F 1.25mm thick lathe Steel rolling shutters , without ball bearing , as specified including top cover , anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated, complete ; gear operater type with bevel gear box and crank handle all as specified and directed by Engr-in-Charge
S&F Safety lever locks mild steel with 4 levers for rolling shutters
S&F Ball Bearing for rolling shutters
M&L for Mild steel sheet eaves gutters,1.25mm thickand 150mm dia galvanised class 32, half round with rounded edges
S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (150 mm bore) including flat iron clamp for proper fixing complete all as specified & directed by Engr-in-charge.
Dismantling of Asbestos cement corrugated or semicorrugated sheets in roof coverings, all as specified and directed.
Demolition of brick work or stone masonry built in CM incl all quions all as specified
Demolition of cement concrete in ground floor and pavings exc 15cm thickness ( above groundFloor).
M&L wet mix macadam (WMM) 50 cm depth in two layers of 25cm each compacted thickness including premixing with water for OMC for the proper compaction as directed by Eng-in-Charge Note: Each layer shall be consolidated separately.
Exvavation intrenches not exceeding 1.5 m wide and not exveeding 1.5 m in depth for laying of casle foundtion etc and getting out in hard /dense soil all as directed
Supply and spread fie river sand in trenches, as in cable cushioning all as directed. Note: Only punned thickness will be considered for measurement & payment.
Brick protection cover on cable with sub class 'B' brick, laid dry and flat adjeacent to each other complete all as specified
Supply , laying jointing & testing XLPE insulated armoured, heavy duty electric LT UG cable with multi stranded aluminimum conductor 1100 volts grade laid in trenches or in duct/passed through pipes or fixed to wall ploes etc cross sectional area of size 35 sqmm 3.5 core
Supply , laying jointing & testing XLPE insulated armoured, heavy duty electric LT UG cable with multi stranded aluminimum conductor 1100 volts grade laid in trenches or in duct/passed through pipes or fixed to wall ploes etc cross sectional area of size 95 sqmm 3.5 core
Material and Labour for earting of machinery / equipment installed at power houses / sub station complete using GI plate earth plate 600 x600x6mm thick burried directly in ground , earth pit not lesss than 2.25m deep belwo ground level connected toand inclduing GI strip 32 x 6mm as earth lead by means of nuts and bolt check nuts and washeres of galvanised iron sheet passing trrough protectin pipe of 40mm dia light grade GI pipe all as shown in electralc plate No 3 of SSR Part I and conncetd to earthing test piont complete including tsting filling ofadquate quantity ofcharcoal dust and common salt including excavation in any type of soil refilling earth and removal of srplus soil upto 50m and PCC1:3:6 type C1 chamber precast RCC cover 40mm thci reinforced with 10mm ida TMT bar 3 Nos both way with handle made out of10mm dia TMT bar 20mm GI medium grade water pipe wire connecting testing etc complete all as directed.
Supply and fixing MCCB 4 pole 250 Amps rating adjustable thermal and fixed magnetic release 50 KA breaking capacity 415 V 50hz AC Supply including necessary fixing arrangements and making all connections complete all as specified
Point wiring complete with 1.5 sqmm single core PVC insulated heavy duty ISI Marked , unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including non metallic rigid PVC conduit not less than 20mm dia and conduit accessories fixed to walls / floors / ceiling etc., and including provision of PVC insulated heavy duty copper conductor, 1.5 sqmm for earth continuity conductor and connected to common earth dolly, including suitable size of sheet metal box 1.6mm thick fixed and flushed inside the walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets, fan regulators Including fixing PVC round block 8 cm dia and 4 cm in depthetc., for the following:-
One light / fan point controlled by one switch.
Supply and fix switch piano 5 Amps flush type one way.
Supply and fix ceiling rose surface bakelite 65x50mm 3 terminals.
Supply and fixing LED , Tube light fitting 20 W, 6500K with Decorative end caps, ultra slim linear LED lighting fixture with extruded polycarbonate surface mounted high Efficiency PMMA diffuser soft glare free light complete accessories prewired and including provision of three core textile braided copper conductor flexible wire from ceiling rose to light fitting all as specified and directed. Make : Ledvance Cat No.LED BATTEN 22W 865 or Equivalent in Wipro/CG/Philips/Bajaj.
Supply and fix MCB DB SPN 8 way Double door type 240volts
Supply and fix MCB SPN 40 AMP
Supply and fix MCB SP 10A
Supply aand fix aircirculated/wall mounted fan industrial type 600 mm sweep
Earthing complete using galvanised stel earth plate 600 x 600 x 6mm thick buried directly in ground earth pit not less than 2.25m deep below ground level connected to and including GI wire 4mm as earth lead by means of nuts and bolts check nuts and washers of galvanised iron sheet, passig throgh protection pipe of 40mm dia light grade GI pipe all as shown in electrical plate No 3 of SSR Part I and connected to earthing test point complete including testing filling of adquate quantity of charcoal dust and common salt including earth work in any type of soil, and removal of surplus soil upto 50 m and PCC 1:3:6 type C1 chamber precast RCC cover 40mm thick reinforced with 10 mm dia TMT bar 3 Nos both way with handle made out of 10 mm dia TMT bar 20mm GI medium grade water pipe, wire mesh funnel etec and connecting testing etc complete all as specified and directed.
Supply and fix light grade galvanised tubing 50 mm dia bore
Supply, installation, testing and commisioning of industrial grade power socket 3 pin (Phase, neutral and earth) including suitable 3 pin plug, mounted on an IP-44 enclosure as per IEC 60309, provision of one MCB 16 Amp SPN, 10 KA rupturing capacity, 'C' curve as per BS:3871 Part-I and 1965 IS: 8825 (1996) including provn of one Single phase power line Surge Suppressor as per IEC 61643-1, complete all as specified and directed by Engr-in-Charge
Point wiring with 2.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed copper conductor FRLS cable in and including PVC casing - caping of suitable size medium grade ISI marked complete and sunk CI/pressed steel terminal switch boxes flush mounting type with new hylam sheet (white) top cover, including earth wire continuity of PVC insulated, unsheathed 2.5 Sqmm (nominal cross sectional area) copper conductor connected to all fittings, sunken boxes and common earth and connected to earth dolly complete all as specified and directed for item No 62 above.
SRI MARUTHI BUILDERS
M/s BHOOMI ELECTRICALS
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .