TP1-45/2024-25 OF CE/TP-I/CNI

Amount

Check surveying and pit marking of tower locations including cost of all labour, lead, lift, hire charges for T&P etc complete.

Earth work excavation in all type of soil with an initial lead of 10m and initial lift of 2m etc., complete.for foundation. In Hard gravelly soil

Earth work excavation in all type of soil with an initial lead of 10m and initial lift of 2m etc., complete.for foundation. In soft distengrated rock not requiring blasting

Earth work excavation in all type of soil with an initial lead of 10m and initial lift of 2m etc., complete.for foundation. In medium rock and dense medium rock not requiring blasting

Earth work excavation in all type of soil with an initial lead of 10m and initial lift of 2m etc., complete.for foundation. In Hard rock requiring blasting

Earth work excavation in all type of soil with an initial lead of 10m and initial lift of 2m etc., complete.for foundation. In Hard rock requiring Wedging and chesiling

Fixing of templates, stub and cleat for KCR tower with supply of templates to site and assembling at site and shifting the template from loc to loc including cost of all materials,fabrication charges, labour, lead, lift etc., complete.

Fixing of templates, stub and cleat for CZ tower with supply of templates to site and assembling at site and shifting the template from loc to loc including cost of all materials,fabrication charges, labour, lead, lift etc., complete.

Dewatering charges during excavation and concreting with 5HP diesel engine including all charges for fuel, engine oil, pump operator etc., complete.

Providing shoring and shuttering with CW Scantlings and planks including cost of all materials, labour etc., complete.

PCC 1:3:6 using 20 mm metal without form work for tower foundation padding concrete including cost of cement of approved cement and all materials , labour, lead and also below ground level curing , steel formwork charges, consolidation, hire charges for T&P,labour of independent gang to be deployed in propotianate to the progress to be acheived within the specified time frame stipulated by the TANTRANSCO officials, lead lift t&p including cost of all materials, adhering to the BOCW act 1996 and rules 2006 without any compromise etc complete.

PCC 1:2:4 using 20 mm HB Stone for tower foundation with steel form work for frustum shaped foundation including cost of cement of approved brand including all materials labour etc., complete,labour, lead, curing , steel formwork charges, consolidation, hire charges for T&P, labour of independent gang to be deployed in propotianate to the progress to be acheived within the specified time frame stipulated by the TANTRANSCO officials, lead lift t&p including cost of all materials, adhering to the BOCW act 1996 and rules 2006 without any compromise etc complete.

RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for raft and plinth with formwork including cost of all materials, labour lead, litf, curing, etc., complete. but excluding the cost of steel reinforcement.

Supplying and fabricating and placing in position of MS/RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift,labour, cost of binding wire, etc., complete.As directed by the Engineer at site.

Back filling of tower pits after laying of stub-setting, concreting with excavated earth, watering and consolidation including all labour etc., complete

Removal of excavated earth from the tower location including cost of all materials, lead, lift, labour and Transporting charges etc., complete.

Providing pipe type earthing including necessary excavation for fixing 3m long 25mm dia GI "B" class pipe and refilling with excavated earth mixed with soft charcoal and connect the earthstrip with the leg of the stub including all cost of materials, lead, lift etc complete.

Plastering with CM 1:3,12 mm thick for muffing coping concrete including cost of all materials, labour, lead, lift etc complete

Transport and erection of towers including sorting out of tower members, tightening punching the bolts and nuts whereever necessary, patch painting, cutting of angles wherever necessary, minor fabrication workss, final checking, cost of T & P, labour of independent gang to be deployed in propotianate to the progress to be acheived within the specified time frame stipulated by the TANTRANSCO officials, lead lift t&p including cost of all materials,adhering to the BOCW act 1996 and rules 2006 without any compromise all leads and lifts etc., complete.

Labour charges for transporting and hoisting of 7 units of 90 KN insulators for Panther and fixing of SS fittings for Panther with all allied hardwares including all cost of labour,lead, lift, T & P etc complete. Without PA rod for Panther

Labour charges for transporting and hoisting of 8 units of 120 KN insulators for Panther and fixing of ST fittings for Panther with all allied hardwares including all cost of labour,lead, lift, T & P etc complete. Without PA rod for Panther

Providing temporary guys wherever necessary including excavation, buryingout of anchor for staywire, tightening, dismantling the same after completion of works including cost of all materials, lead, lift, labour etc complete.

Supplying and fixing of name board of size 0.75 x 0.45m using 18 gauge MS Sheet with 25x25x3mm MS angle frame painting with approved enamel painting two coats over primary coat and lettering as directed by Engineer at site, including cost of all materials, labour, lead, lift, etc., complete..

Painting with two coats of anticorrosive paint over tower leg at a height of 45 cm including all cost of materials,labour, lead lift etc complete

Providing well supported trussels up to 5m height for road crossing including cost of all materials labour lead and lift etc complete as directed by the Engineer at site.

Lowering the HT/LT Line during stringing of power conductor and earthwire after restringing the same in original position including labour,lead, lift etc complete

Tack welding of bolts & Nuts in the newly erected towers up to bottom cross arm level including of three tack weld for each bolts & Nuts hire charges of welding machine, cost of welding rods, transporting charges and painting with cold galvanizing and tightening of bolts wherever necessary including cost of all materials, labour, lead, lift,, transporting hire charges etc. complete.

Labour charges for transport of 6 Nos of Panther conductor, paying out, jointing, rough sagging, tensioning, clipping, providing vibration dambers at tension locations including jumber connections, providing trussals at various intervals for avoiding damages of conductor including transport charges, loading, unloading, lead, lift, labour and cost of T&P etc complete. For span

Labour charges for Releasing of Existing 3 wire Panther conductor including cost of all materials lead lift etc complete As directed by the Engineer at site. For span

Labour charges for cutting, uprooting and removing of small trees from the line including the hire charges for T & P etc. complete

Labour charges for cutting, uprooting and removing of large trees from the line including the hire charges for T & P etc. complete

Clearing of light jungle including all cost of labour etc.

Labour charges for releasing, Lowering of existing 1 No of 7/3.55mm GI earthwire including lead, lift, labour and cost of T&P etc complete. Under LC Condition,

Supply, transporting and fixing of Number plate in the tower leg with all lead & lift ,etc., complete

Supply, transporting and fixing of Danger board in the tower leg with all lead & lift ,etc., complete

Supply, transporting and fixing of Phase plate in the tower leg with all lead & lift ,etc., complete

Supply, transport and fixing of Single Tension fittings for panther as per design drawing and specifications.

Supply, transport and fixing of Single Suspension fittings for Panther as per design drawing and specifications.

Supply, transport and fixing of SB damber for panther as per design drawing and specifications.

Supply, transport and fixing of Mid span joint for Panther as per design drawing and specifications

Supply, transport and fixing of Repair sleeve for Panther as per design drawing and specifications

Supply, transport and fixing of 16 mm dia. U Bolt and Nuts/ Hanger rods as per design drawing and specifications

Fabrication, galvanisation and supply of standard MS towers part as per department approved drawing/design including stacking of tower parts, transporting of tower parts to site including all taxes and duties, fright charges etc, complete. The raw materials standard should be as per IS 2062 and for galvanishing as per IS 2633 and 6745 (Latest code), The governing standards for towers should be as per the specified IS codes directed by Depertmental engineer.(The contracter need to arange for inspection of towers at purachase factory at his own cost).

Supplying, Transportation from source to site , fabrication, galvanising of standard Bolts and nuts of various sizes and various lengths as per department approved drawing including all taxes and duties, lead, lift and head load, freight charges etc., the raw material standard should be as per IS 2633 and 6745 and as per specification as per IS code directed by department engineer at site.

Dismantling of GI earth wire in AS IS WHERE IS CONDITION clearing from the site on cost to paid to TANTRANSCO including the cost of loading, unloading with necessary tools and plants with safety norms (The quoted rate should not be less than Rs.18,000/-)

GST for bidders within TamilNadu

GST for bidders outside TamilNadu (IGST)