REPAIR REPLACEMENT AND MAINT OF INTERNAL WIRING ELECTRIC FITTING FIXTURES FANS DESERT COOLER INDUSTRIAL COOLER IN OTM ACCN AND TECH BLDG IN ZONE A UNDER AGE EM OF GE (AF) (TECH AREA) KHERIA AGRA

Amount

Taking down carefully copper/aluminium point wiring (Light/Fan/Socket or power) complete including fixture and fittings such as lamp holders,switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall/ceiling & floors etc, complete all as specified and directed.

Taking down main switches/DB's (alongwith existing board, MCBs & isolators) including removing the same from site and making good disturbed surfaces complete all as specified & directed.

Taking down existing old/unserviceable service connection cable of various sizes including removing the same from site complete all as specified & directed.

Taking down existing old/unserviceable sub main wiring of any type and description, removal of teak wood batten/ PVC pipe/ PVC casing & caping and making good disturbed surfaces of walls, ceilings etc as per existing complete all as specified and directed.

M&L for point wiring concealed type with 1.50 sqmm PVC insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade including 1.50 sqmm PVC insulated unsheathed solid copper conductor cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, pressed steel terminal box made of 1.2mm thick MS sheet/anodised steel box, painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated sheet cover for fixing switches/ socket/regulators etc & making good the disturbed surface by applying putty & matching with colour to the adjoining wall for the one light/ fan/ exhaust fan point controlled by one no piano type switch 5 Amps single pole one way complete all as specified & directed.

M&L for point wiring concealed type with 1.50 sqmm PVC insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade including 1.50 sqmm PVC insulated unsheathed solid copper conductor cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, pressed steel terminal box made of 1.2mm thick MS sheet/anodised steel box, painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated sheet cover for fixing switches/ socket/regulators etc & making good the disturbed surface by applying putty & matching with colour to the adjoining wall for the one socket out let 3/5 pin 5 Amps controlled by one no piano type switch on the same board complete all as specified & directed.

M&L for point wiring concealed type with 1.50 sqmm PVC insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade including 1.50 sqmm PVC insulated unsheathed solid copper conductor cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, pressed steel terminal box made of 1.2mm thick MS sheet/anodised steel box, painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated sheet cover for fixing switches/ socket/regulators etc & making good the disturbed surface by applying putty & matching with colour to the adjoining wall for the one socket outlet 3/5 pins 5 Amps controlled by one no piano type switch on independent board complete all as specified & directed.

M&L for point wiring concealed type with 1.50 sqmm PVC insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade including 1.50 sqmm PVC insulated unsheathed solid copper conductor cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, pressed steel terminal box made of 1.2mm thick MS sheet/anodised steel box, painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated sheet cover for fixing switches/ socket/regulators etc & making good the disturbed surface by applying putty & matching with colour to the adjoining wall for the one bell/ buzzer point controlled by one no bell push switch 5 Amps single pole one way complete all as specified & directed.

M&L for point wiring concealed type with 2.50 sqmm PVC insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade including 2.50 sqmm PVC insulated unsheathed solid copper conductor cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box, painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated sheet cover for fixing switches/ socket/regulators etc & making good the disturbed surfaces as per existing for one independent light/ socket outlet point controlled by one no switch, SP, one way, 15 amps complete all as specified & directed.

Supply & fix switch piano, flush type single pole, one way 5/6 Amps, 240 volts complete all as specified & directed.

Supply & fix bell push, single pole one way 5 Amps, 240 volts complete all as specified & directed.

Supply & fix socket outlet 2 in 1, 2 pin 5/6 Amps and 3 pin 5/6 Amps, flush universal type complete all as specified & directed.

Supply & fix switch piano, flush type single pole, one way 15/ 16 Amps, 240 volts complete all as specified & directed.

Supply & fix socket outlet 2 in 1, 3 pin 5 Amps and 3 pin 15 Amps, flush universal type complete all as specified & directed.

Supply & fix ceiling rose, surface bakelite, 65x50mm surface type, two to three terminals, AC 240 volts complete all as specified & directed.

Supply & fix lamp holder, PVC/ polycarbonate type with back plate suitable for batten/ pendant fittings complete all as specified & directed.

Supply & fix rotory stepped type electronic fan regulator mini flush type 120/ 280 Volts complete all as specified & directed.

Supply & fix in repairs, switch piano, flush type single pole, one way 5/6 Amps, 240 volts complete all as specified & directed.

Supply & fix in repairs, switch piano, flush type single pole, one way 15/ 16 Amps, 240 volts complete all as specified & directed.

Supply & fix in repairs, socket outlet 2 in 1, 2 pin 5/6 Amps and 3 pin 5/6 Amps, flush universal type complete all as specified & directed.

Supply & fix in repairs, socket outlet 2 in 1, 3 pin 5 Amps and 3 pin 15 Amps, flush universal type complete all as specified & directed.

Supply & fix in repairs, switch socket combination 2 in 1, 2/3 pin, 5/6 Amps shuttered flush type multipurpose controlled by one switch complete all as specified & directed.

Supply & fix in repairs, switch socket combination 2 in 1, 3 pins 5/6 Amps and 3 pins 15/16 Amps shuttered flush universal type controlled by one switch complete all as specified & directed.

BLANK

Supply & fix in repairs, lamp holder, PVC/ polycarbonate type with back plate suitable for batten/ pendant fittings complete all as specified & directed.

Supply & fix in repairs, rotory stepped type electronic fan regulator mini flush type 120/ 280 Volts complete all as specified & directed.

S&F LED Adore Lamp 15W B22 CDL Ball Lamp 6500K complete all as specified & directed.

S&F Surface and wall mounted LED batten white powder coated, extruded aluminium housing provided for efficient heat dissipation for 1200x108x62 (for 20W) with polycarbonate diffuser & integrated electronic driver, with one no. 20Watt LED luminaires complete and fixed to wall/ ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings including taking down old unserviceable fitting complete all as specified & directed. Note :- Old unserviceable fitting shall be contractor's property as per schedule of credit.

Supply & fix surface mounting type bulkhead 6watt LED luminaire with reflector cover with and including 6 watt LED lamp and electronic driver, connector block etc with internally prewired fixed to wall/ ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings including taking down old unserviceable fitting complete all as specified & directed. Note :- Old unserviceable fitting shall be contractor's property as per schedule of credit.

S&F fluorscent tube rod with new Ultra bright LED polycarbonate Tubelight with <10% THD with very high efficacy suited for installation in existing old serviceable T8 tube light batten fitting with G13 lamp holders to give glare free light and making electric connection complete including taking down old tube rod complete all as specified & directed. Note :- Old Tube rod shall be contractor's property as per schedule of credit.

S&F wall mounting T8 lamp batten with new Universal batten for G13 T8 type lamps, white powder coated, extruded aluminium housing for efficient heat dissipation for 1200x108x62 (for 20W) box type with polycarbonate diffuser and fixed to wall/ ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire from ceiling rose to fitting with and including taking of old unserviceable lamp batten fitting complete all as specified & directed. Note :- Old unserviceable lamp shall be contractor's property as per schedule of credit.

M&L for provision of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including PVC rigid conduit not less than 20mm dia ISI marked with its accessories, surface type, including one run of single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of size 4.0 sqmm as earth continuity and connected to common earth dolly complete all as specified & directed. Note:- Two runs of 4.0 sqmm cable & one run of 4.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid as one unit length.

M&L for provision of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including PVC rigid conduit not less than 25mm dia ISI marked with its accessories, surface type, including one run of single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of size 6.0 sqmm as earth continuity and connected to common earth dolly complete all as specified & directed. Note:- Two runs of 6.0 sqmm cable & one run of 6.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

M&L for provision of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 10.0 sqmm drawn in and including PVC conduit pipe not less than 32 mm dia ISI marked including one run of single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of size 10.0 sqmm as earth continuity and connected to common earth dolly complete all as specified & directed. Note:- Two runs of 10.0 sqmm cable & one run of 10.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

S&F 1100 volts grade PVC insulated stranded aluminium conductor served with an inner sheathing of PVC tape and over all PVC sheathed one twin core cable flat or circular of 6.0 sqmm (nominal dia) in service connections suspended by insulating hangers not more than 1.0Mtr apart including 4mm dia suspension GI wire or alongwith wall (surface type) after bracket in and including PVC conduit not less than 25mm dia with its accessories including proper fixing of conduit with saddles complete all as specified and directed.

S&F 1100 volts grade PVC insulated stranded aluminium conductor served with an inner sheathing of PVC tape and over all PVC sheathed one twin core cable flat or circular of 10.0sqmm (nominal dia) in service connections suspended by insulating hangers not more than 1.0Mtr apart including 4mm dia suspension GI wire or alongwith wall (surface type) after bracket in and including PVC conduit not less than 25mm dia with its accessories including proper fixing of conduit with saddles complete all as specified and directed.

S&F 1100 volts grade PVC insulated stranded aluminium conductor served with an inner sheathing of PVC tape and over all PVC sheathed one twin core cable flat or circular of 16.0sqmm (nominal dia) in service connections suspended by insulating hangers not more than 1.0Mtr apart including 4mm dia suspension GI wire or alongwith wall (surface type) after bracket in and including PVC conduit not less than 25mm dia with its accessories including proper fixing of conduit with saddles complete all as specified and directed.

M&L for 1.50 Mtr long house service bracket in renewal, made out of 32mm dia light grade GI pipe, bent to shape including MS hook & stay or guy and fixed to wall/ poles including all necessary nut/ bolts complete all as specified and directed.

M&L for factory made sheet metal enclosure 240 volts, 8 ways with 200A rated bus bar, SPN, double door type suitable for housing MCB/Isolators and fixed the same on & including mild steel hold fasts of suitable size & shape after grouting the hold fasts in the wall with and including PCC (1:2:4) type B1 using 20mm graded stone aggregate complete all as specified & directed.

M&L for factory made sheet metal enclosure 240 volts, 4 ways with 200A rated bus bar, SPN, double door type suitable for housing MCB/Isolators and fixed the same on & including mild steel hold fasts of suitable size & shape after grouting the hold fasts in the wall with and including PCC (1:2:4) type B1 using 20mm graded stone aggregate complete all as specified & directed.

M&L for factory made sheet metal enclosure 240 volts, 2 ways without bus bar, SPN suitable for housing MCB/Isolators and fixed the same on & including mild steel hold fasts of suitable size & shape after grouting the hold fasts in the wall with and including PCC (1:2:4) type B1 using 20mm graded stone aggregate complete all as specified & directed.

M&L for factory made sheet metal enclosure 415 volts, 4 ways with 200A rated bus bar, TPN, double door type suitable for housing MCB/Isolators and fixed the same on & including mild steel hold fasts of suitable size & shape after grouting the hold fasts in the wall with and including PCC (1:2:4) type B1 using 20mm graded stone aggregate complete all as specified & directed.

S&F in repairs, single pole and neutral sheet metal enclosure (AC box) with a two pin & earth plug and socket with one no. MCB SP of capacity 20 Amps 240 volts including taking down old sheet metal enclosure complete all as specified & directed.

S&F in repairs, bus bar chamber of sheet metal box including four nos. aluminium strips of 100 Amps, 415 volts and making all connections including taking down old unserviceable bus bar chamber complete all as specified and directed.

S&F in repairs, junction/ sunken box of size 100x100x50mm of 1.60mm thick mild steel sheet with 1 to 4 way as per site requirement suitable for 20mm dia conduit with and including two coats of black bituminous painting on inner & outer surfaces of box and fixed on walls in CM 1:4 including taking down old unserviceable junction/ sunken box and making good the disturbed surfaces of walls as per existing complete all as specified and directed.

S&F in repairs, junction/ sunken box of size 175x100x50mm of 1.60mm thick mild steel sheet with 1 to 4 way as per site requirement suitable for 20mm dia conduit with and including two coats of black bituminous painting on inner & outer surfaces of box and fixed on walls in CM 1:4 including taking down old unserviceable junction/ sunken box and making good the disturbed surfaces of walls as per existing complete all as specified and directed.

S&F in repairs, junction/ sunken box of size 250x200x50mm of 1.60mm thick mild steel sheet with 1 to 4 way as per site requirement suitable for 20mm dia conduit with and including two coats of black bituminous painting on inner & outer surfaces of box and fixed on walls in CM 1:4 including taking down old unserviceable junction/ sunken box and making good the disturbed surfaces of walls as per existing complete all as specified and directed.

S&F in repairs, junction/ sunken box of size 275x225x50mm of 1.60mm thick mild steel sheet with 1 to 4 way as per site requirement suitable for 20mm dia conduit with and including two coats of black bituminous painting on inner & outer surfaces of box and fixed on walls in CM 1:4 including taking down old unserviceable junction/ sunken box and making good the disturbed surfaces of walls as per existing complete all as specified and directed.

S&F in repairs, 'C' series MCB SP, 6 to 32 Amps, 240 volts, 50Hz, 10kA complete all as specified & directed.

S&F in repairs, 'C' series MCB SPN, 6 to 32 Amps, 240 volts, 50Hz, 10kA complete all as specified & directed.

S&F in repairs, MCB SPN 40 to 63 Amp 240V, 'C' series 10 kA, complete all as specified and directed.

S&F in renewal, MCB TPN 63 Amps, 415 V, 50Hz,10 kA, 'C' series complete all as specified and directed.

Supply and fixed in repairs, MCCB four pole with enclosure, 415 volts, 250 Amps with breaking capacity 25kA complete all as specified & directed.

S&F in repairs, MCCB four pole with enclosure, 415 volts, 125 Amps with breaking capacity 16kA complete all as specified & directed.

S&F in repairs, MCCB four pole with enclosure, 415 volts, 100 Amps with breaking capacity 16kA complete all as specified & directed.

S&F in repairs, MCCB four pole with enclosure, 415 volts, 63 Amps with breaking capacity 16 KA complete all as specified & directed.

Taking down unserviceable security light/ CFL/ FTL fittings of any type from any height i.e. on buildings/ chhajjas/ hanger etc and refixing the same fittings on existing position after replacement of unserviceable wornout parts/ items including necessary internal wiring complete all as specified and directed. Note:- (i) Replaced unserviceable wornout parts/ items shall be measured and paid separately to the extent required under respective items as "supply only". (ii) Taking down of light fitting shall not be measured & paid where only replacement of tube light/ lamp is required.

Supply only 9W 865 222mm Ultra bright LED PL-L with 2G11 lamp holders to give glare free light very high efficacy suitable for installation in 4 Pin 36 watt CFL existing fittting complete all as specified and directed.

Supply only 18W 865 419mm Ultra bright LED PL-L with lamp holders to give glare free light very high efficacy suitable for installation in 4 Pin 36 watt CFL existing fittting complete all as specified and directed.

S&F in repair LED 1x36 watt 4 pin, 230 volts, non retrofit type and model complete all as specified and directed.

S&F in repair 18 W LED, single ended, 2 Pin with G-24d-1, G-24d-2 & G-24d-3 bases & integrated starter or 4 Pin G-24q base complete all as specified and directed.

Supply only "Regular" electronic ballast suitable for BJHF 118/120 P type luminaires/ FTL 1x18/20W complete all as specified & directed.

Supply only "Regular" electronic ballast suitable for BJHF 128 P type luminaires/ T5 1x28W complete all as specified & directed.

Supply only "Regular" electronic ballast suitable for BJHF 228 P type luminaires/ T5 2x28W complete all as specified & directed.

Supply only "Regular" electronic ballast suitable for BJHF 136/140 P type luminaires/ FTL 1x36/40W complete all as specified & directed.

Supply only "Regular" electronic ballast suitable for BJHF 236/240 P type luminaires/ FTL 2x36/40W complete all as specified & directed.

S & F in repair, 3.0mm thick ISI marked laminated bakalite sheet cover of size 125x125mm including making necessary provision for fixing/ mounting of existing switches/ socket/ regulators etc and fixing the existing switches/ socket/ regulators etc on board with existing screws and after making necessary connections fixing the board on existing position with and including new screws & GI covers with cup head washers complete all as specified and directed.

S & F in repair, 3.0mm thick ISI marked laminated bakalite sheet cover of size 200x125mm including making necessary provision for fixing/ mounting of existing switches/ socket/ regulators etc and fixing the existing switches/ socket/ regulators etc on board with existing screws and after making necessary connections fixing the board on existing position with and including new screws & GI covers with cup head washers complete all as specified and directed.

S & F in repair, 3.0mm thick ISI marked laminated bakalite sheet cover of size 275x225mm including making necessary provision for fixing/ mounting of existing switches/ socket/ regulators etc and fixing the existing switches/ socket/ regulators etc on board with existing screws and after making necessary connections fixing the board on existing position with and including new screws & GI covers with cup head washers complete all as specified and directed.

S & F in repair, 3.0mm thick ISI marked laminated bakalite sheet cover of size 300x250mm including making necessary provision for fixing/ mounting of existing switches/ socket/ regulators etc and fixing the existing switches/ socket/ regulators etc on board with existing screws and after making necessary connections fixing the board on existing position with and including new screws & GI covers with cup head washers complete all as specified and directed.

S&F in repair LED Crom Round/square Downlighter with aluminium housing including neccessary arrangement compelet all as specified and directed.

S&F in repair LED Pluto panel (surface) aesthetrical designed 2x2 LED 42W flat panel for surface mounting which provides soft-light and glare free symmetrical illumination and fixutre size in mm (LxWxH) 600x600x70 (2x2) including neccessary arrangement compelet all as specified and directed.

S&F in renewal/replacement of LED Pluto New panel (surface) aesthetrical designed 4x1 LED 36W flat panel for surface mounting which provides soft-light and glare free symmetrical illumination and fixutre size in mm (LxWxH) 1195x295x70 (4x1) including neccessary arrangement compelet all as specified and directed.

S&F in renewal/replacement of LED Pluto panel (surface) aesthetrical designed 2x1 LED 28W flat panel for surface mounting which provides high brightness-light and glare free symmetrical illumination and fixutre size in mm (LxWxH) 595x295x70 (2x1) including neccessary arrangement compelet all as specified and directed.

M&L for earthing complete with galvansided steel earth plate electrode 600 x 600 x 6.0mm thick directly burried in the ground (Earth pit not less than 2.25 m deep below normal ground level) with top edge of earth plate not less than 1.50M below the normal ground level with and including provision of earth test point terminal block made out of gun metal or phosphorus bronze of size 75x75x25mm drilled and screwed with & including 3 Nos. 8mm dia 25mm long hexagonal head screw and necessary connections complete, connected to GI wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 15mm bore GI pipe medium grade including necessary fittings for protection of earthing wire, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge (0.63 mm) 8 mesh per linear incl 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm MS deformed bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS bolts & washers as required and connection from earth test point to earth electrode with same GI wire alongwith protection pipe (upto max distance of 7.5 mtr is included in unit rate) and testing on completion complete all as specified and directed.

Taking down and dismantling of AC Ceiling fan of any size and any make from bldg at different location and removing of all wornout parts washing thoroughly bearing/bush by kerosine, washing & cleaning of fan blade, body parts etc and separating worn out / defective unserviceable parts (whenever necessary) reassembling the same including provision of twin core flexible wire up to 1.00 meter long and re-hanging the same at building and satisfactory test run complete all as specified and directed. Note: Unserviceable parts to be replaced to the extent required shall be measured & paid seperately as supply only under respective items here-in-after.

All as per item No76 here-in-before but for exhaust fan up to 380mm sweep complete all as specified and directed.

M & L for rewinding of ceiling fan 1200/1400 mm sweep with super enamelled copper wire of existing gauge incl all associated materials such as super cotton tape, film paper dry inmlation varnish, tape, insulation etc and heating, varnishing and testing complete incl removing of burnt winding and re-assembling complete all as specified and directed.

Supply only ball bearing of sizes suitable for any type / make of ceiling fan incl fixing and taking out of old u/s bearing complete all as specified and directed.

Supply only Capacitor 220 volts 2.5/3.15 MFD suitable for ceiling fan complete all as specified and directed.

Supply only Rubber reels, including nuts, bolts, washer and fixing complete all as specified and directed.

Supply only Split pin for holding down rod of ceiling fan / exhaust fan of approved make and fixing complete all as specified and directed.

Supply only down rod and clamps for hanging ceiling fan of any size/make and fixing complete all as specified and directed.

M & L for one coat of spray painting with DUCO spray paint, super glossy to fan body incl blades, down rod / frame canopy etc, after removing of loose paint rust, dust and all oily particle by washing and making surface suitable for enamel paint including writing of fan number etc in black paint for Ceiling fan of any size and make complete all as specified and directed.

All as per item No 84 here-in-before but for exhaust fan complete all as specified and directed..

M&L for repacement of water dispenser of cooling & heating of water. cooling capacity 2.0ltr/hr and heating capacity 5.0 ltr/hr complete with all accessary suitable capacity compressor4 230VoltAC,50HZ electric driven and other accessary including two(2)no water bottel 20 ltr capacity PVC each dispenser complete specified and directed Model-Minimagic,6210164 230Volt/50HZ electric driven Make-voltas & other equivalent model Bluestar/Atlantis.

Disconnecting and taking out the defective/ non-functional desert cooler of any description and in any position/ installed at any floor (where any ladders and other T&P are not suppose to use to remove the desert cooler from the position), strip opening of desert cooler, cleaning, servicing, oiling & greasing etc of desert cooler, taking out and removing unserviceable/ defective parts and including replacement of unserviceable spares/ parts i.e condenser, internal wiring, re-assembling & testing of the desert cooler complete all as specified and directed. Note:- Replacement/Renewal of defective/ wornout spares/ parts of desert cooler i.e condenser & internal wiring shall be measured and paid separately under respective items as ''S&F in repairs''.

M&L for painting after scraping/cleaning surfaces of desert cooler off sizes, applying one coat of black bituminous paint internally and one coat of synthetic enamel paint of approved colour on external surface of desert cooler of any make /type and capacity including writing of SM/ MES No and unit name complete all as specified and directed.

S&F in repairs exhaust fan regulator 450W, 250 volts suitable for desert cooler of any size capacity including wiring complete all as specified and directed.

S&F in repairs wood wool pads (set of three) including PVC pipe pieces 03 Nos of required length & dia for connection of water distribution PVC elbo 03 Nos of desert coolers complete all as specified and directed.

S&F in repairs submersible pump for desert cooler heavy duty, single phase including commissioning and testing complete all as specified and directed.

M&L for disconnecting & taking out existing burnt winding of unserviceable exhaust fan motor of desert coolers of any description & in any position of capacity 450mm sweep, 900 RPM, opening of strip and rewinding with & including appropriate size copper super enameled wire of make Atlas/ Finolex / Devi Dayal as approved by the Engineer-in-charge including insulating material such as illuminous paper, leatherized paper, cotton tape, glass sleeving, insulating varnish etc complete to the entire satisfaction of Engineer-in-charge including transportation from site to workshop & back to site after repair including necessary connections & testing on completion complete all as specified and directed.

S&F in repair of exhaust fan motor of desert coolers heavy duty, 380mm sweep, 1400 RPM with all accessories complete all as specified and directed.

M&L for removing of perished body of desert cooler over all size 0.750x0.750x0.910 mtr from existing site and replace the same with new body made out of 20 gauge PGI sheet by means of fabrication welding/ jointing having tank size Approximet 0.750x0.750x0.230mtr and front grill 0.460x 0.460mtr size for air flow direction, 03 Nos perforated sheet side panels size Approximet 0.680x0.610mtr of each and also having electric control panel consisting two nos 5 Amps switch, one rotary speed regulator switch complete and duly painted with two coats of synthetic enamel paint over one coat of primer internally and externally complete all as specified and directed.

S&F in repair of detachable type perforated side panel made out 20 gauge PGI sheet including wood pads of desert coolers of size 90cmX90cmX75cm complete all as specified and directed.

S&F of front grills of desert coolers in renewal, size 18"x18" of each made out of 26 gauge sheet as per sample and including piano type switch complete all as specified and directed.

S&F of front grills of desert coolers in renewal, size 24"x24" each made out of 26 gauge sheet as per sample and including piano type switch complete all as specified and directed.

S&F of ply wood BWR quality 6mm thick, cut to shape as required on site and fixed on wall/ window/ cooler opening with and including necessary nuts & bolts/ screws with gully etc complete all as specified and directed.

M&L for cleaning & scraping surfaces of industrial cooler of size 2.30Mx1.80Mx2.20M complete (as required) including base/ support structure for painting and applying one coat of black bituminous paint over a coat of red oxide primer internally and one coat of synthetic enamel paint of approved shade on external surface including writing of SM/ MES No and unit name complete all as specified and directed.

M&L for servicing/ over hauling of three phase exhaust fan 36" by providing oil/ grease to the bearings complete all as specified and directed.

M&L for servicing/ over hauling of water pumps of capacity 1/2 HP by providing oil/ greas to the bearings including replacement of inlet and outlet pieces of PVC pipe complete all as specified and directed.

S&F in repair of 1/2 HP water pump single phase, 230 Volts including replacement of inlet and outlet pieces of PVC pipe complete all as specified and directed.

S&F in repair MS Arm set with frame for Industrial coolers any type and size as per sample complete all as specified and directed.

S&F in repair MS blade of size 36" ISI marked for industrial coolers exhaust fan of any description/ model complete all as specified and directed.

M&L for rewinding of 3 phase exhaust fan motor of 36" sweep, 900 RPM with super quality of copper winding wire of size as per existing/ original specifications including insulating materials & varnishing etc and reassembling the same & testing on full load with blade of exhaust complete all as specified and directed.

Supply and fixing/ laying in renewal of unservicable 25mm bore GI tubes medium grade with all fittings in new or old position (walls/ ceiling/ floors etc) including necessary clamps etc complete all as specified and directed.

Supply and fixing/ laying in renewal of unservicable 20mm bore GI tubes medium grade with all fittings in new or old position (walls/ ceiling/ floors etc) including necessary clamps etc complete all as specified and directed.

Supply and fixing/ laying in renewal of unservicable 15mm bore GI tubes medium grade with all fittings in new or old position (walls/ ceiling/ floors etc) including necessary clamps etc complete all as specified and directed.

Supply and fixing in renewal of unservicable 25mm dia stop valves, cast copper alloy, screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified & directed.

Supply and fixing in renewal of unservicable 20mm dia stop valves, cast copper alloy, screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified & directed.

Supply and fixing in renewal of unservicable 15mm dia stop valves, cast copper alloy, screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified & directed.

S&F in repair ceiling/ wall mounting LED Green LED ultima Square/ round of clear lighting with electronic driver complete of size 6 watt complete all as specified & directed.

S&F in repair ceiling LED downlighter PRAKHAR of clear lighting for extra high ceiling applications fitting with opal diffuser and electronic driver complete of size 50 watt complete all as specified & directed.

S&F in repair stout plus LED complete fitting including 1x20 watt LED tube suitable for mirror light complete all as specified & directed.

S&F in repair LED Strip 18 watt (WW) complete with Driver bright enegry saving environment friendly & robust complete all as specified & directed.

Star Enterprises

M/S J J ENTERPRISES

m/s Agra Builder

AGRA AND COMPANY

H.S.Kochhar n Sons

TRIVENI ASSOCIATES