Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.1 LAccepted-AOC | L1 | Accepted-AOC lowest | |
| 2 | L2₹26.5 L+₹1.8 L (7.19%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹26.5 L+₹1.8 L (7.42%)Rejected-Finance 130 292 MAKHAN LAL KA HATA AJEET GANJ KIDWAI NAGAR KANPUR 208061 | 208061 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹26.8 L+₹2.1 L (8.46%)Rejected-Finance 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | JALANDHAR | PUNJAB | 144001 | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹27.5 L+₹2.8 L (11.5%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹36.6 L
EMD Value
₹73,180
Closing Date
21 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gurdaspur
Garrison Engineer, Gurdaspur (Tibri)
Spl repair of bldg No 22 OTM Accn at Tibri Mil Stn under GE Gurdaspur.
2023_MES_619386_1
GE GSR-55/2023-2024
Open Tender
Civil Works
Item Rate
210 days
GE Gurdaspur
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE Gurdaspur
₹73,180
29 Dec 2023
18 Sept 2023
28 Oct 2023
18 Sept 2023
21 Oct 2023
9 Oct 2023
Amount
Dismantling of roof brick tiles fixed in cement mortar in single layer.
Demolition of mud phuska in roofs any thickness including plastering and leeping complete all as specified and directed.
Roughening the surface of old concrete floor, picking sweeping cleaning and washing down with water to remove dust/mud etc. and brushing neat cement slurry @ 3kg/Sqm.
M&L for cement concrete 1:2:4 type B-0 using 12.50mm graded stone aggregate finished even and smooth without using extra cement as in roof padding complete all as specified.
M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.6 kg per sq.m complete all as specified and directed.
M&L APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick, reinforced with polyster non wove fabric (weight not less than 150 gms/ Sqm) including priming surface with bitumen primer @ 0.40 kg /Sqm by forced application with butane torch over entire roof area with minimum overlaps of 100mm at the sides/ longitudinal edges of strips membrane and 150mm at the ends and sealed complete all as specified and directed and all as per manufacturer's instructions.
M&L for 40 mm thick brick tiles laid over and including 15 mm thick cement mortar 1:6, joints grouted and flush pointed in cement mortar (1: 3) mixed with 5 % of crude oil by weight of cement, flush pointing in cement mortar (1:3) shall be done as a separate process, complete all as specified and directed.
All a per Srl item No 07 above but except tiles (old serviceable dismantled tiles obtained from Srl item No 01 shall be reused after necessary cleaning of mortar)
M&L for PCC 1:2:4 type B1 (using 20mm graded stone agg) as in roof kerbs or mud stops, coping, benching, rounded or chamfered on edges complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as directed.
M&L plaster 15mm thick in cm 1:3 in sunken portion of slab using waterproofing compound and providing APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick, reinforced with polyster non wove fabric (weight not less than 150 gms/ Sqm) including primed surface with bitumen primer @ 0.40 kg /Sqm by forced application with butane torch over entire roof area with minimum overlaps of 100mm at the sides/ longitudinal edges of strips membrane and 150mm at the ends and sealed complete all as specified and directed by Engineer-in-Charge. Note : Water proofing compound shall be measured and paid separately.
Supply only integral water proofing compound.
M&L for PCC 1:5:10 type E2 using 40 mm graded stone agg in filling, fdn and mass concrete in sunken floor complete all as specified and directed.
M&L 25 mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub base for receiving the floor finishes complete all as specified and directed.
Taking down cement plaster of any description on brick walls on concrete surfaces etc including racking out joints hacking for key, scrubbing down with water etc from walls and ceiling surfaces of any description complete all as specified and directed.
M&L for rendering 12mm thick plaster in cement mortar 1:6 on fair faces of brick or concrete surfaces of walls, finished surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
M&L for rendering 15mm thick plaster in cement mortar 1:4 on other than fair faces of brick or concrete surfaces of walls, finished surface even and fair with WPC, upto height 12m complete all as specified and directed by Engineer-in-Charge. Note : WPC shall be measured and paid separately
M&L for rendering 5mm thick plaster on ceiling in cement mortar 1:3 finished surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
M&L preparation of new plaster surface and applying two coats of Oil bound distemper of wall over a coat of primer on wall complete all as specified and directed by EIC.
M&L preparation of new plaster surface and applying two coats of cement base paint of wall on wall complete all as specified and directed by EIC.
M&L preparation of new plaster surface and applying three coat of colour wash on wall complete all as specified and directed by EIC.
M&L preparation of new plaster surface and applying three coat of white wash on ceiling complete all as specified and directed by EIC.
M&L for Preparation of old surface shall including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots on existing surfaces and applying two coats of oil bound distemper on wall complete all as specified and directed.
M&L for complete removal of existing treatment, Preparation of old surface and applying two coats of cement base paint on wall complete all as specified and directed.
M&L for Preparation of old surface shall including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots. on existing surfaces and applying two coats of white wash on ceiling complete all as specified and directed.
M&L for Preparation of old surface shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots. on existing surfaces and applying two coats of colour wash on wall complete all as specified and directed.
M&L for preparation of old painted wooden surface exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted steel surface exc 10cm width or girth and applying one coat of synthetic enamel paint ht upto 12m complete all as specified and directed.
Material and Labour for repairing of RCC projections, chajjas, roofs, facia etc. by necessary preparations i.e. scrapping, cutting, chiseling, dusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1 : 2 : 4) using 12.5mm graded crushed stone aggregate and finished with cement sand mortar (1:3) using coarse sand in patches area n.exc 5 Sqm each and thickness of RCC member exc 50mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified. Note: - Cost of formwork, bldg ht upto 12 mtr, shall be deemed to be included in unit rate quoted by the Contractor.
Demolition of brick work or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc.
M&L for brick work with sub class 'B' old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.
Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar.
M & L for Green Marble work 16-18 mm thick (table rubbed and polished) in steps, jambs, Shelves, pillars window cills, cooking platforms, stair case and like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.
S&F machine cut kota stone slab flooring 20-22mm thick over and including cement screed base 15mm thick in 1:4 jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (with bees wax polish) complete all as specified and directed.
Labour only for grinding of Existing Machine cut kota stone slab flooring including rubbing and polishing (with bes wax polish) complete .
M&L Non skid coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.11 sqm to 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in cm 1:6 and including demolition of existing tiles and screed complete all as spcified and directed.
M&L for glazed ceramic coloured tiles in vertical surface of size 350x250x7mm/ 450x350x7mmmm thick joint free on and incl 10mm thick screed bed in cm(1:4)set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles including demolition of existing tiles and screed complete all as speciifed and directed.
S&F steel window box type made of ERW tube, hollow P section of size 60mmX25mm double rebated outer frame comprising double skeleton shutters i.e. guaged & glazed, shutter frame of ERW tube P section size 50mmX20mm with two openable leaf for each shutter consisting two Nos sash bar of T-section 20mmX3mm welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/ screwed to frame for fixing of wire gauge including MS guard bars, fittings and fixtures welded to frame/ shutters as given below and all as shown on drg No. CEJZ/TD-1020/08 Sh 1/3 to 3/3 including one shop coat of priming and two coats of synthetic enamel paint and taking down old existing window complete:- (i) Thickness of the sheet shall be of 18 gauge (ii) Hold fast,150mm long of flat iron 12mmX3mm- 04Nos per window (iii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iv) MS Tower bolt 150mm long-02 Nos per leaf (v) Z section 20mmX25mm,100mm long stopper -01 Nos per leaf (vi) Cleat 55mm long of hollow square 15mmX12mm -01 Nos per leaf (vii) MS pintol hinges size 75mmx12mm- 2 Nos. per leaf (viii) Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts (four Nos for each window). Note: Wire cloth, glass, shall be measured and paid for separately
Taking down old existing steel window/ ventilator including all fittings complete all as specified.
S&F Powder coated (Minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators, side hunge one or more rebates including necessary jointing cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws complete all as specified and directed
S&F 4mm thick figured glass ordinary quality in square or rectangular in size n.exc .5 sqm in each pane in aluminium door, window, ventilator shutter/ frame complete all as specified and directed
S&F 4mm thick sheet glass ordinary quality and glazing with oil putting in squares nexc 0.50 Sqm in each pane complete all as specifiwd and directed.
S&F Stainless steel cockroach trap with hole, square size 127X127mm mm complete all as specified and directed
S&F in repair 4mm thick sheet glass ordinary quality and glazing with oil putting in squares nexc 0.50 Sqm in each pane including hacking out of old broken glass panes from wooden or steel frame complete all as specified and directed.
Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats) complete all as specified and directed.
All as per Srl item No 46 above but exc 1.50 Sqm but n.exc 4 Sqm.
Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and directed.
Taking down shutter of any description exc 2.00 Sqm each complete all as specified and directed.
S&F pressed steel frame for doors with one or more rebate including necessary lugs, hings, lock strike, plate etc complete of size 105x60mm all as spd including one shop coat of priming and two coats of synthetic enamel paint and filling PCC 1:2:4 (type-B0) in the frames complete all as specified and directed.
S&F 30mm thick factory made solid PVC door shutter consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F 30 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F glazed and skeleton shutters 35mm thick of 2nd class hard wood open rebated and prepared to receive gauge & glass etc with edge of sash bar and number edges of framing plain chamfered beads for securing glass etc size of number of shutters as spd SSR Part-I & section 8 clause 8.24 & (a) complete all as specified and directed.
S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F in repair 18 mm thick plywood, grade BWR, laminated on both side with decorative choice lamination, fire resistant, moisture resistant type fixed with screws to timber/ steel frame work Including 6mm thick lipping of 2nd class hard wood fixed with nails on all sides as in Cup board shutters, shelves, partitions etc. complete all as specified and directed.
S&F Aluminium anodized barel tower bolt of extruded section 150mm long complete all as specified and directed.
S&F aluminium alloy handle fabricated type anodized of size 150 mm long complete all as specified and directed.
S&F aluminium alloy handle fabricated type anodized of size 100 mm long complete all as specified and directed.
S&F 75mm size hasp and staple safety type aluminium anodised hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F 75mm size medium weight mild steel butt hinge fixed with metal surface through bolt or welding or with screw complete all as specified and directed.
S&F Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F in repair 300 mm long mild steel ordinary rat tail rod pattern spring, including roller and roller plate including fixing through welding/ bolts/ screws in metal/ wooden frame complete all as specified and directed.
S&F 100mm size medium weight extruded aluminium alloy butt hinge fixed with metal surface through bolt or with screw, with galvanised mild steel hinge pin, anodised type B-21 complete all as specified and directed.
M&L for preparation of new painted wooden surface exc 10cm width or girth and applying two coat of synthetic enamel paint over one coat of primer complete all as specified and directed.
S&F rotational moulded polytheylene white triple layered white water storage tanks of capacity 1000 Litres (cylindrical vertical with closed top) ISI marked hoisted and fixed in position including 20mm bore ball brass valve, high pressure, with polythene float and flynut including dismantling of existing water tank and fittings complete all as specified.
S&F in repair stop valve 20mm bore cast copper alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc complete all as specified and directed.
S&F GI tubing 15mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings ISI marked including taking up and down existing complete all as specified and directed.
Fixing only old steel tubing including new fittings 15mm bore in new or old position including cleaning the same including taking down existing complete all as specified and directed.
S&F GI tubing 20mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings ISI marked including taking up and down existing complete all as specified and directed.
Fixing only old steel tubing including new fittings 20mm bore in new or old position including cleaning the same including taking down existing complete all as specified and directed
S&F GI tubing 32mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings as in spout complete all as specified and directed.
Cutting existing steel tubing for alterations or additions and screwing existing steel tubing for alterations or additions ( or lengthening screw on pipe to form connector) for 15mm bore complete all as specified and directed.
S&F in repair bib taps 15mm dia cast copper alloy chromium plated fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified and directed.
S&F in repair stop valves or angle valve 15mm bore cast copper alloy chromium plated alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc complete all as specified and directed.
S&F in repair 15 mm stop cock screwed to iron pipe CP cast copper alloy concealed type with long shank and capstan head for (Bath shower) in repair complete all as specified and directed.
S&F in repair brass CP shower rose 125 mm size with 225mm arm swivel joint fancy type complete all as specified and directed.
S&F Aluminium anodised tubular towel rail 20mm dia., 60 cm long between flanges, fixed to wall complete all as specified and directed.
S&F in repair vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with PVC `P’ or `S’ trap, integral foot rest including connection to trap and flushing pipe, flushing cistern etc complete and bedding in PCC 1:7:12 type F-2 complete all as specified and directed. Note:- Flush pipe and flushing cistern to be measured and paid separately.
S&F in repair for Vitreous China wash down water closet pan (pedestal pattern) white ( excluding flushing cistern and flush pipe) including plastic water closet seat white, closed pattern with flat botton and cover and mild steel chromium plated or aluminized hinging device including P or S trap with brass CP jet complete all as specified and directed.
S&F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle, 32mm dia PVC flush pipe and connections, joints to pipes, making good the disturbed surfaces complete all as specified and as directed.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.
S&F in repair vitreous China wash basin, with full pedestal white flat back, size 550x 450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and brass coupling 32mm bore cutting for and pinning in ends of brackets complete all as specified and directed.
S&F in repair vitreous china Urinal, Half stall type, white (excluding flushing cistern) white with grating, waste coupling and union for discharge pipe complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screw, pointing aroug urinal back in cement, grating and union for discharge pipe incl PTMT waste coupling, waste pipe, urinal spreader complete all as specified and directed.
S&F in repair PVC waste pipe 32mm dia 800mm to 1000 mm long fixed to wash fitting of wash basin and sink all as specified and directed.
S&F in repair Pillar taps, cast copper alloy but fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.
Dismantling of cast iron ,PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches , if required.
S&F PVC (SWR)pipes 110mm dia in any length with rubber ring joint fixed to wall/floor upto 12m height complete all as specified and directed.
S&F PVC (SWR)pipes 75mm dia in any length with rubber ring joint fixed to wall/floor upto 12m height complete all as specified and directed.
S&F PVC (SWR) bends 110mm dia, in any radius, complete all as specified and directed.
S&F PVC (SWR) bends 75mm dia, in any radius, complete all as specified and directed.
S & F 110 bore PVC(SWR) junction single (Single T), (equal or unequal ), with access door complete all as specified and directed.
S&F PVC vent cowl of size 110mm.
M&L for PVC (SWR) floor trap, plain including jointing with solvent cement 100mm dia of outlet complete all as specified and directed.
S & F Stack clamps (110 mm pipe) out of 20 mm by 1.5 mm galvanised Mild steel incl stays, bolt and nuts and securing ends of stays to wall or roof complete all as specified and directed.
Supply and fixing in repair cutrain rod 20mm dia of Mild steel chromium plated with fixing brackets, stops, rollers etc fixed to wall with screws, PVC plugs including taking down existing curtain rod complete all as specified and directed.
Demolition of cement concrete in ground floor & paving n.exc 15cm, above ground level.
M&L for cement cocnrete type B-1 (1:2:4) (20mm graded aggregate) as in plinth protection as thickiness of 50mm finishing the surface even and fair complete all as specified.
M&L 75mm thick cement cocnrete type D-2 , 1:4:8 (using 40mm stone aggregate) as in sub base complete all as specified.
M&L 60mm thick PCC (M-35) factory made coloured interlocking tiles/ paver block of shape/ size as conforming to IS 15658, joints will be filled with fine sand complete all as specified and directed.
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge.
S&F for Mild steel Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, desert cooler stand and similar work conforming to Fe-290 Gde-E-165 and two coat of synthetic enamel paint and one coat of red oxide primer complete all as specified and directed.
M&L for Cutting holes in brick walls but Depth of embedded portion of holddfasts or lugs measured from the face of the jamb into the wall exc half bricks but n exc full bricks built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed by EIC.
M&L for providing of cement concrete 1:2:4 Type B-1 in fixing of holdfasts as required complete all as specified and directed by EIC.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof/wall coverings/crumple joints complete all as specified and directed.
S&F in repair Aluminum, 0.56 mm thick plain, sheet in wall cladding, crumple joints and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood /steel/Concrete framing with plain 40 mm lap joints including bending or turning up, mitred angles, etc. as required complete all as specified and directed by EIC.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for upto 12m height all as specified & directed.
M&L for RCC in 1:2:4 type B-0(using 12.5 mm graded stone agg) as in chajjas facia, shelves, lintel etc and similar work all as spd.
Form work to rough finished surface of concrete flat to soffits of shelves, chajja, fins etc including supports over hangs upto 12m height all as specified & directed.
S&F 10mm dia and over TMT bar cut to length bent to shape including cranking binding spirraly, hooping, hooking end and binding with MS wire (anealed) not less then 0.9 mm dia or securingwith clips as apd.
M&L TMT bars 6 to 8mm dia and over cut to length bent to shape required including crancking spirally for hooking ends and binding with and including MS wire annealed n.less than 0.9mm dia complete all as specified.
E/M PORTION Taking down carefully aluminium/copper point wiring for light, fan, bell, socket of point complete with fittings such as switches, ceiling roses, pendents, regulator socket etc complete at site and making goods disturbed surfaces of walls, floors etc.
Point wiring with PVC insulated and PVC sheathed single core multistranded FRLS copper conductor cable of size 1.5 Sqmm including concealed PVC conduit with fittings and making good to the disturbed surfaces with continuous earth wire of PVC insulated and PVC sheathed single core multistranded FRLS copper conductor cable of size 1.5 Sqmm to common earth including provn of 3mm thick plastic laminated sheet of appropriate size and fixing to and including CI/MS boxes for mounting of accessories like surfaces sockets and regulators etc. complete all as specified for One light point/ Fan/ bell point controlled by one way switch
All as per Srl item No 115 above but one 5 pin socket outlet 5 amps on same board.
All as per Srl item No 115 above but 5 amps socket outlet on independent board.
All as per Srl item No 115 above but one light point controlled by two way switches.
All as per srl item No.115 here-in-before but with PVC insulated and PVC sheathed single core multistranded FRLS copper conductor cable of size 2.5 Sqmm (nominal area), using approved colour coding, 1100 Volt grade ISI marked including PVC insulated and PVC sheathed single core multistranded FRLS copper conductor cable of size 2.5 Sqmm (nominal area) 1100 Volt grade ISI marked as earth continuity conductor and connecting to the common earth dolly for 3 pin 15/16 Amps socket outlet on independent board.
M&L for sub main wiring with two single core multi stranded PVC insulated, unsheathed copper conductor of grade 1100 Volt , FRLS cable of size 6 sqmm (red for phase and black for neutral) and including electrical grade PVC conduits of desired colour not less than 1.2 mm thick and 25 mm dia. & 6 sqmm FRLS multistranded copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth duly complete and taking down old unserviceable one. Note :- (a) Cost of making good the disturbed surface plastering/ filling putty alongwith matching with the existing finishes is deemed to be included in the quoted rate by contractor. (b) Three run of cable alongwith PVC conduit together shall be measured as single run.
S&F switch piano flush type single pole one way 5 amps.
S&F socket outlet 3 pin 5 amps flush type.
S&F switch flush type 15 amps single pole type one way
S&F socket outlet 3 pin 15 amps flush type
S&F switch piano 2 way 5A all as specified and directed.
S&F in replacement surface mounting universal batten housing made of powder coated CRCA sheet suitabe for and upto 1 x 18/20W LED tube rod single sided and taking down old unserviceable housing complete all as specified and directed.
S&F in replacement LED tube light 20W ultra bright LED polycarbonate tube light with very high efficacy suitable for fitting into tube light batten fitting complete all as as specified and directed. Note :- The contractor will submit the LM-80 and LM-79 report from manufacturer to Engineer-in-Charge before incorporating the items in work.
Taking down carefully ceiling fan complete fittings at site removing fans, depositing to MES store yard and taking back to site for hanging only.
Hanging only ceiling fan and connecting up including provision of cable from ceiling rose to connector of fan all as specified and directed.
S&F in replacement of fan regulator electronic type 5 step 100 watt, 240 volt and connecting complete all as specified and directed.
S&F lamp holder, angle type PVC/ polycarbonate type with back plate, suitable for lamp holder base of and including 9 watt LED retrofit lamp complete all as specified and as directed.
M&L ceiling rose, 3 terminals/ phase/ PVC/ polycarbonate, isolated body
S&F GI pipe bracket made out of GI pipe light grade 32 mm bore and bent to shape 1.5m long, MS clamps made out of MS flat iron of size 40mm x 5mm thick and drilling of hole for and including nuts, bolts and washers including painting MS clamps with two coats of synthetic enemal paint over a coat of red oxide primer including taking down the existing GI pipe bracket complete all as specified and directed.
Supply and fixing in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
Supply and fixed in repair sheet metal enclosure for DB’s when MCB’s to be used, 240 volt 8 way SPN with bus bar and double door complete all as specified and directed. Note :- All the connection of incoming and out going wire in MCB will be made with thimble with suitable size as directed
S& F in repair MCB single pole 6 amps to 32 amps , 'C' series complete all as specified and directed.
All as per Srl item No 137 above but single pole and neutral 32 amps complete all as specified and directed.
Material and labour for replacement of distribution board made out of CRCA sheet DB vertical type double door TPN 4 Way MS sheet including fixing in the wall, cutting chases, grounting and necessary patch work and white wash to match with the existing including making connections all as directed containing the folowings:- (a) MCCB 4 Pole 63 Amps 16 KA breaking capacity with thermal release: 01 No (In coming). (b) Bus bar made out of Aluminium duly insulated with wire adhesive tape RYB & black :4 Nos. (c) MCB SPN 40 Amp: 4 Nos, MCB SP 40 Amp: 04 Nos (Out going). (d) Connection from MCCB to bus bar will be made with Aluminium Strip of suitable capacity as directed.
M&L Earthing complete with galvanised steel earth plate electrode 60cm ×60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 connected to earthing test point including testing on completion including watering GI pipe 20mm bore medium grade, 15mm bore light grade GI pipe for protection of earth lead including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm including 8mm dia TMT bars both ways @ 15cm centre to centre with one handle for lifting made out of 8mm dia MS bar, funnel & wire mesh, excavation and earth work in any type of soil complete including dismantling existing all as specified & directed by Engr-in-charge.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core.
Excavation in trenches in soft loose soil n.exc 1.5m wide and n.exc. 1.5m in depth for poles, stay, cable, pipe etc. including taking out brick protection, getting out all as specified.
Returning filling including spreading, levelling and well ramming in layers each n.exc 25 cm thick in soft loose soil all as specified.
Removing excavation material, soils to a distance n. exc 50m and depositing where directed at a level n. exe 1.5m above the starting point.
Removing excavation material, soils to a distance n. exc 50m and depositing where directed at a level n. exe 1.5m above the starting point.
M&L sand cushioning in trenches using fine sand to under ground cable, laid in two layers before laying the cable & after laying the cable complete all as specified.
Supply and fix exhaust fan, steel body AC single Phase 230V of size 300mm sweep with blades and frame and louvers complete all as specified and directed.
A Schedule of Credit for old/unserviceable demolished/dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.
MALKIT SINGH AND SONS
DEEPAK AND CO
S S CONSTRUCTION
M/s SODHI SALES CORPORATION
M/S D Raj And Co
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .