Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.7 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹17.5 L+₹28,860 (1.67%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹18.2 L+₹95,484 (5.54%)Rejected-Finance VILLAGE SEKHA PO MAGAR MUDIAN TEH DISTT GURDASPUR PB | GURDASPUR | GURDASPUR | PUNJAB | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹18.8 L+₹1.6 L (9.36%)Rejected-Finance OFFICE 2ND FLOOR MEHRA TOWER TIBRI ROADD GURDASPUR 143521 | GURDASPUR | PUNJAB | 143521 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹19.6 L+₹2.4 L (13.7%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
13 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gurdaspur
Garrison Engineer, Gurdaspur (Tibri)
Certain repair to E/M Installation under AGE B/R-II at Tibri Mil Stn, GE Gurdaspur.
2022_MES_569687_1
GE GSR-64/2022-2023
Open Tender
Civil Works
Item Rate
240 days
GE Gurdaspur
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE Gurdaspur
₹60,000
3 Feb 2023
17 Dec 2022
20 Jan 2023
17 Dec 2022
13 Jan 2023
1 Jan 2023
Amount
Dismantling of roof brick tiles laid in cement mortar in single layer.
Demolition mud phuska in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) and removing mud/ rubbish complete all as specified and directed.
M&L for PCC 1:2:4 type B0 (using 12.50mm graded stone aggregate) as in levelling course with water proofing compound as per manufacturar instruction by weight of cement finished even and fair complete al as specified and directed. (Note :- Water proofing compound shall be measurec and paid separately).
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 with WPC as per manufacturer's instructions, finished even & fair complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately.
M&L for PCC 1:2:4 type B1 (using 20mm graded stone agg) as in roof kerbs or mud stops, rounded or chamfered on edges, using WPC as per manufacturer's instructions where required, including form work complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately.
Supply only integral water proofing compound.
M&L APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick, reinforced with polyster non wove fabric (weight not less than 150 gms/ Sqm) by forced application with butane torch over entire roof area/ sunken floor with minimum overlaps of 100mm at the sides/ longitudinal edges of strips membrane and 150mm at the ends and sealed in, including bitumen primer @ 0.30 litre/ Sqm after cleaning surface complete all as specified and directed.
M&L for 40 mm thick brick tiles laid over and including 15 mm thick cement mortar 1:6 mixed with water proofing compound as per manufacturer's instructions. Joints grouted and flush pointed in cement mortar (1: 3) mixed with 5 % of crude oil by weight of cement, flush pointing in cement mortar (1:3) shall be done as a separate process, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.
All as per Srl item No. 08 above but except tiles.
Dismantling posts or struts (RCC) any section including taking out embedded portion and making good disturbed ground, embedded in natural ground, complete all as specified and directed.
All as per Srl item No 10 above but embedded in concrete, brick work etc.
M&L for excavating in post holes ( or similar holes) in soft/ loose soil each n. exc 0.5 cum getting out, returning, filling in and remming earth of broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance n. exc 50m and making good surface.
Dismantling fencing wire mesh any type including FI, rods, bolts complete all as directed.
M&L for PCC 1:4:8 type C-2 with using 40mm graded stone aggregate as in foundations filling and mass concete complete all as specified and directed.
S&F in repair galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc. complete all as specified and directed.(each line wire to be measured and paid)
Restraining and resecuring including making good staples of old serviceable barbed wire in position.
S&F mild steel angle, flat iron as in fencing post and struts in fencing as directed including drilling holes, notching for wire etc conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F mild screw bolts diameter of neck 5 to 10mm (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut ,exc 10 but n. exc 15cm long complete all as specified and directed.
S&F mild steel round bars (Fe-410-0 or Fe-310-0), 10mm dia and over as in chain link fencing, fixed to concrete post with mild steel nuts, bolts and wahsers and tying to GI chain link fencing with 2mm dia GI wire complete all as specified and directed.
M&L for two coats of synthetic enamel painting on new steel surfaces of any description over 10cm in width or girth not otherwise described over priming coat of red oxide including prepration of surfaces complete all as specified and directed.
Fixing only chain link fencing including line wire any mesh size and type to any type of strands rails, straining bolts etc including provision of binding wire complete all as specified and directed.
Supply only 3 to 4mm dia over all PVC coated galvanised mild steel chain link fencing of mesh size 75mm x 75mm fixed with string bolts complete all as specified and directed.
M&L 12mm thick cement in CM 1:6 on brick or concrete surfaces other than fair surfaces, finished the surfaces even and smooth without using extra cement and applying two coats of oil bound distemper over a coat of primer including taking down cement plaster complete all a specified and directed.
M&L for 5mm thick cement plastering on ceiling in CM 1:3. and applying three coats of white wash plastered surfaces including taking down cement plaster complete all as specified and directed
M&L for 15mm thick cement plastering on fair faces in CM 1:4 on brick work or concrete surfaces and finished the surfaces even and fair using water proofing compound including taking down existing plaster complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately.
M&L for two coats of cement base paint on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed.
Dismantling wrought iron and mild steel work of any description not otherwise provided complete all as specified and directed.
S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including eighe hookds and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete Gde Fe-290 Gde E-165 complete all as specified and directed.
M&L for preparation of old plastered surface of walls rubbing down, making good holes, cracks, etc and stopping etc on existing distempered surfaces and applying one coat of oil bound distemper on wall complete all as specified and directed.
M&L for preparation of old plastered surfaces of ceiling by brooming down, making good holes, cracks, etc and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old plastered surfaces of wall by brooming down, making good holes, cracks, etc and applying one coat of white wash complete all as specified and directed.
M&L for rubbing down, making good holes, cracks, etc and stopping etc on existing painted surface and applying one coat of synthetic enamel paint on kerb stone of any description over 10cm girth or width, not otherwise described complete all as specified and directed.
M&L prepartion of old painted surface of wood & wood based surfces of any decsription not other wise described over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.
All as per Srl item No 33 above but on steel / iron surfaces.
S&F steel window box type made of ERW tube, hollow P section of size 60mmX25mm double rebated outer frame comprising double skeleton shutters i.e. guaged & glazed, shutter frame of ERW tube P section size 50mmX20mm with two openable leaf for each shutter consisting two Nos sash bar of T-section 20mmX3mm welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/ screwed to frame for fixing of wire gauge including MS guard bars, fittings and fixtures welded to frame/ shutters as given below and all as shown on drg No. CEJZ/TD-1020/08 Sh 1/3 to 3/3 including taking down old existing window complete:- (i) Thickness of the sheet shall be of 18 gauge (ii) Hold fast,150mm long of flat iron 12mmX3mm- 04Nos per window (iii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iv) MS Tower bolt 150mm long-02 Nos per leaf (v) Z section 20mmX25mm,100mm long stopper -01 Nos per leaf (vi) Cleat 55mm long of hollow square 15mmX12mm -01 Nos per leaf (vii) MS pintol hinges size 75mmx12mm- 2 Nos. per leaf (viii) Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts (four Nos for each window). Note: Wire cloth, glass, painting shall be measured and paid for separately
S&F steel window/ ventilator box type made of ERW tube hollow P section of size 60mmX25mm outer frame (single rebated) comprising glazed skelton shutter frame of ERW tube P section including MS guard bars, fittings and fixtures welded to frame/ shutters all as shown on drg No. CEJZ/TD-1019/08 Sh 1/3 to 3/3 including Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts, including taking down old existing window/ ventilator complete all as specified and directed. Notes: (i) Thickness of the sheet shall be of 18 gauge. (ii) Glass/ wire mesh, painting shall be measured and paid for separately
Taking down chowkats with shutter n.exc 1.50 Sqm each with shutter (without taking off shutter for the chowkats) complete all as specified and directed.
Taking down chowkats with shutter exceeding 1.50 sqm but not exceeding 4 Sqm each with shutter (without taking off shutter for the chowkats) complete all as specified and directed.
Taking down shutter of any description exc 1.00 Sqm and n.exc 2.00 Sqm complete all as specified and directed.
S&F pressed steel frame for doors with one or more rebate including necessary lugs, hinges, lock strike plate etc complete of size 105x60mm and filling with PCC 1:2:4 (type-B0) in the frames complete all as specified and directed.
S&F pressed steel frames of size 125 X 60mm for doors with one or more rebates including necessary lugs, hinges, lock strike plate and filling of chowkats with PCC 1:2:4 type B-0 in the frames complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F 30mm thick factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to e fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed.
S&F 30 mm thick factory made Flush shutters, solid core construction, with block board core and decorative face panels on both side complete all as specified and directed.
S&F 35mm thick second class hard wood (Hollock), glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm including beads complete all as specified and directed.
M&L for preparation of new wooden surface exc 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
M&L for preparation of new steel surface exc 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm each pane complete all as specifiwd and directed.
S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc 0.50 Sqm each including hacking out of old broken glass panes from wooden or steel frame complete all as specified and directed.
S&F Aluminium anodized barel tower bolt of extruded section 150mm long ISI marked complete all as specified and directed.
S&F aluminium alloyed handle fabricated type anodized of size 150 mm long complete all as specified and directed.
S&F in repair 100mm size medium weight mild steel butt hinge fixed with metal surface through bolt or weld with screw complete all as specified and directed.
S&F Aluminium alloy, anodised, 300 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.
M&L cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate ) as in sub base of floors to raise level only complete all as specified and directed.
M&L for 60mm thick PCC (M-35) factory made coloured interlocking paver block of shape/ size as conforing to IS 15658, joints will be filled with fine sand including demolition of existing paver blocks complete all as specified and directed by Engineer-in-Charge. Note :- Sand layer below paver blocks will be measured and paid under relavent item.
M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge.
M&L coloured Chequered cement concrete tiles with grey cement and pigment , 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors in floors over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. complete all as directed.
M&L for brick work with sub class 'B' old size bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed
All as per Srl item No 60 above but except bricks.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and of any description and in any position not otherwise specifically provided for complete all as directed.
Material and labour 75mm thick PCC (1:3:6) type C1 (using 20mm graded broken stone aggregate) as in plinth protection finishing the surface even and fair including cutting grooves 10mm x 30mm deep at every 3.0m interval and filled with bituminous mastic filling comprising 1 part of heated hot blown bitumen 85/25 and 3 parts of heated sand (all by weight) complete all as specified and as directed.
M&L for 40mm thick plain cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in flooring finishing even and smooth without using extra cement complete all as specified and directed.
M&L for cement concrete 1:2:4 type B-1 (using 12.50 mm graded aggregate) as in coping ,bands, hold fasts blocks, blocks for posts etc. including weathering slightly rounded or chamfered throating as directed including form work (straight or curved) and finishing all exposed surface facing of concrete complete all as specified and directed.
M&L PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in surface channels and drains complete all as specified and direcrted.
M&L for ceramic glazed coloured tiles of size 350x250x 7mm/ 450x350x7mm/300x200x7mm thick joint free on and including 10mm thick screed bede in CM(1:4) set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles on vertical surfaces of wall as in skirting/ dado including dismantling existing tiles with screed complete all as specified.
M&L non skid dark/ coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.11 sqm to 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15mm thick screed bed in CM 1:4 including dismantling existing tiles with screed complete all as specified.
S&F in repair bib taps 15mm bore chromium plated fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair Pillar taps, cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore and fixed.
S&F vitreous China wash basin, white flat back, size 550x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, CP waste coupling complete all as specified and directed.
Supply only PVC low level flushing cistern 10ltr capacity, with syphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etc complete all as specified and directed.
S & F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.
Dismantling of cast iron ,PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches , if required.
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floor complete all as specified and directed .
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floor complete all as specified and directed .
S&F PVC (SWR) bends 110mm dia, in any radius, complete all as specified and directed.
S&F PVC (SWR) bends 75mm dia, in any radius, complete all as specified and directed.
S&F110mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed.
S&F 75mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed.
S & F Stack clamps (110 mm pipe) out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.
All as per Srl item No 82 above but 75mm pipe.
S&F steel rolling shutters, without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete push pull or manual type thickness of lathe 1.25 mm complete all as specified and directed.
S&F ball bearing for rolling shutter complete all as specified and directed.
S&F safety lever locks mild steel with 4 levers for rolling shutter complete all as specified and directed.
M&L for keyed pointed to brick walls in CM 1:4 complete all as specified and directed
M&L for raking out joints and pointing to brick work in walls or to bricks on edge in floors, surface channels , roof etc in CM 1:4 complete all as specified and directed.
Material and Labour for repairing to RCC projections, chajjas, roofs, facia, ceiling etc. by scrapping, cutting, chiseling, de-rusting and cleaning exposed reinforcement of damaged loose RCC surfaces and applying neat cement slurry @ 3kg/sqm and filling the surfaces with cement sand mortar 1:3 or cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) using coarse sand in layers as required and reinforced with 8mm dia. TMT bars in patches area n.exc 5 Sqm each and thickness of RCC member exc 50mm including applying two coats of finishes to match with the existing surfaces in any situation complete all as specified. Notes:- 1. Cost of formwork shall be deemed to be included in unit rate quoted by the Contractor. 2. Flat area shall only be measured and paid.
A Schedule of Credit for old/unserviceable demolished/dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .