Providing, installation, testing and commissioning of electro-mechanical machinery alongwith allied works of lift out Mohra Upper Hoja-Goila of WSS Halaran.

Amount

PUMPING STATION AT UPPER HOJA OF WSS HALARAN

Providing, installation, testing and commissioning of 1500 GPH x 180 meter head HC pump set with suitable rating prime mover in compliance with the technical conditions and allied works by way of surveying of site, designing of pump machinery and prime mover in conformity with site conditions. Laying of M-20 grade RCC foundation block for each pump of size (6’x3’x4’) or (as per pump-motor base frame dimensions) by using reinforcement steel of 10 mm dia. The foundation block as per size of pump set should have additional margin of 6” on all sides. The foundation block may be combined for all the pumps which must includes space on all sides of pump set and space between the pump sets. Providing, fabrication and laying of 50mm dia. MS suction pipe line to the pump set of length as per site conditions and upto maximum of approximately 6 meters each including 50 mm dia MS bends, MS flanges, expanders/reducers / dismantling joints / saddles/ pipe extension pieces, 50 mm dia Cast Iron sluice valve-1no., gaskets, nuts, bolts, washers as per site requirement. Providing, fabrication and laying of 40mm dia MS delivery pipe as per site conditions including MS bends, MS flange, expanders/reducers / dismantling joints/ saddles/ pipe extension pieces, Brass /Cast steel Sluice valve 40 mm dia and NRV 40 mm alongwith by pass arrangement (class 150 accompanied with manufacturer’s in house test certificate) gaskets, nuts, bolts, washers. Job includes greasing work, P/F of graphite gland packing and thereafter testing on no load and then on full load and commissioning thereof. Job includes providing / fitting and laying of copper cable 10mm2 from motor to panel in six leads approximately 36 meters for each motor, then p/f and laying 16mm2 copper cable upto MCCB-bus bar-voltage stabilizer in three leads approximately 30 meters in length alongwith neutral wire conforming to ISI standards with proper thimbling and insulation material. Job covers providing and fitting of 63 ampere MCCB of 50KA breaking strength. Proper chemical earthing of the equipment should be done for safety of machinery. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handing equipments etc.

Making connection of Sump outlet pipe with suction lines through 80 mm dia. MS pipe manifold. Making connection of delivery lines with rising main through 80 mm dia. MS pipe manifold. Job includes providing and fitting of bus bar arrangement complete with frame and insulation work on the wall of the pump room. Job includes providing, laying and fixing of insulation rubber mats around electro mechanical machinery on the floor of the pump house. Job includes providing of maintenance tool kit and portable welding set. Job includes cost of machinery, equipment and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handling equipment etc.

Providing, carriage, installation, testing and commissioning of 3 phase, 25 KVA voltage stabilizer copper wound, first quality CRGO silicon steel core, naturally- oil cooled, manually operated, 14-gauge container chamber alongwith allied works. Job includes providing of 25 KVA voltage stabilizer complete with mineral insulating oil, MCCB, change over switch complete with safety and protection devices etc. Job includes providing and fitting of single core armoured Al. cable of 50mm2 from electric pole to 100 ampere main switch in four leads approximately 50 meters length of each lead and further Providing and fitting of 16mm2 copper cable from 100 ampere main switch to voltage stabilizer approximately 20 meters in length complete with insulation and thimbling. The voltage stabilizer should have 5 upwards steps and 2 downwards steps (or as per the specified voltage range) from the line voltage i.e., it should work from 180V to 400+5%. Proper earthing of the equipment shall be done. Complete Job includes cost of machinery, equipment and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools and tackles etc.

PUMPING STATION AT GOILA OF WSS HALARAN

Providing, installation, testing and commissioning of 1500 GPH x 180 meter head HC pump set with suitable rating prime mover in compliance with the technical conditions and allied works by way of surveying of site, designing of pump machinery and prime mover in conformity with site conditions. Laying of M-20 grade RCC foundation block for each pump of size (6’x3’x4’) or (as per pump-motor base frame dimensions) by using reinforcement steel of 10 mm dia. The foundation block as per size of pump set should have additional margin of 6” on all sides. The foundation block may be combined for all the pumps which must includes space on all sides of pump set and space between the pump sets. Providing, fabrication and laying of 50mm dia. MS suction pipe line to the pump set of length as per site conditions and upto maximum of approximately 6 meters each including 50 mm dia MS bends, MS flanges, expanders/reducers / dismantling joints / saddles/ pipe extension pieces, 50 mm dia Cast Iron sluice valve-1no., gaskets, nuts, bolts, washers as per site requirement. Providing, fabrication and laying of 40mm dia MS delivery pipe as per site conditions including MS bends, MS flange, expanders/reducers / dismantling joints/ saddles/ pipe extension pieces, Brass /Cast steel Sluice valve 40 mm dia and NRV 40 mm alongwith by pass arrangement (class 150 accompanied with manufacturer’s in house test certificate) gaskets, nuts, bolts, washers. Job includes greasing work, P/F of graphite gland packing and thereafter testing on no load and then on full load and commissioning thereof. Job includes providing / fitting and laying of copper cable 10mm2 from motor to panel in six leads approximately 36 meters for each motor, then p/f and laying 16mm2 copper cable upto MCCB-bus bar-voltage stabilizer in three leads approximately 30 meters in length alongwith neutral wire conforming to ISI standards with proper thimbling and insulation material. Job covers providing and fitting of 63 ampere MCCB of 50KA breaking strength. Proper chemical earthing of the equipment should be done for safety of machinery. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handing equipments etc.

Making connection of Sump outlet pipe with suction lines through 80 mm dia. MS pipe manifold. Making connection of delivery lines with rising main through 80 mm dia. MS pipe manifold. Job includes providing and fitting of bus bar arrangement complete with frame and insulation work on the wall of the pump room. Job includes providing, laying and fixing of insulation rubber mats around electro mechanical machinery on the floor of the pump house. Job includes providing of maintenance tool kit and portable welding set. Job includes cost of machinery, equipment and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handling equipment etc.

Providing, carriage, installation, testing and commissioning of 3 phase, 25 KVA voltage stabilizer copper wound, first quality CRGO silicon steel core, naturally- oil cooled, manually operated, 14-gauge container chamber alongwith allied works. Job includes providing of 25 KVA voltage stabilizer complete with mineral insulating oil, MCCB, change over switch complete with safety and protection devices etc. Job includes providing and fitting of single core armoured Al. cable of 50mm2 from electric pole to 100 ampere main switch in four leads approximately 50 meters length of each lead and further Providing and fitting of 16mm2 copper cable from 100 ampere main switch to voltage stabilizer approximately 20 meters in length complete with insulation and thimbling. The voltage stabilizer should have 5 upwards steps and 2 downwards steps (or as per the specified voltage range) from the line voltage i.e., it should work from 180V to 400+5%. Proper earthing of the equipment shall be done. Complete Job includes cost of machinery, equipment and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools and tackles etc.

M/S RAGHUNATH MECHANICAL AND ELECTRICAL ENGINEERING WORKS (BID ID -2331988)

GS ENGG WORKS (BID ID -2330822)