WELCOME MAINT REPAIR REPLACEMENT TO FLOORING TILLING WORK SANITARY FITTING BRICK WORKS JOINERY EXTERNAL INTERNAL PLASTERING BDY WALL FENCING ROOF TREATMENT AND CERTAIN BR AND EM WORK AT AF STN DHANSA UNDER AGE BR AF RAJOKRI AND AGE EM AF RAJOKRI OF G

Amount

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two coat of Cement base paint complete all as specified and as directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two coat of oil bound distemper on walls complete all as specified.

All as per item No.2 here-in-before but on surfaces of ceiling.

M&L for providing 1 to 2 mm thick wall care putty on wall before applying oil bound distemper and making the surface uniform all as specified.

M&L for preparation of old painted surfaces of wood & wood based of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified.

M&L for preparation of old painted surfaces of steel of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified.

M&L for preparation of old surfaces or unplastered surfaces of wall and applying two coat of weather proof exterior emulsion paint over a coat of primer including applying birla putty complete all as specified and directed.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys ,scrubbing down with water etc complete all as specified.

M&L for 15 mm thick plastering in two layers (10+5) mm in cement mortar (1:4) on brick or concrete surfaces including rendering on fins, fascias, chajja, parapets etc and finishing the surfaces even and fair (without using extra cement), top layer shall be with WPC as per manufacturer's instruction and complete all as specified. Note: WPC shall be measured and paid separately.

Supply only intergral water proofing compound ISI Marked complete all as specified.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer on walls. complete all as specified.

M&L for preparation of newly plastered surfaces of wall and applying two coats of weather proof exterior emulsion paint over a coat of primer complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:6) on brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified.

M&L for preparation of newly plastered or unplastered/undecorated surface of wall and applying two coats of oil bound distemper over one coat of primer complete all as specified.

M&L rendering 10mm thick in cement mortar1(1:3) as in ceilings finished even and smooth (without using extra cement) complete all as specified.

M&L for preparation of newly plastered or unplastered/undecorated surface of Ceiling and applying two coats of oil bound distemper over one coat of primer complete all as specified

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

All as per item No.17 here-in-before but exc 1.5 Sqm and not exc 4 Sqm each complete all as specified.

Taking down chowkhats or frames not exc. 1.5 sq. m each complete all as specified and directed.

All as per item No.19 here-in-before but exc 1.5 Sqm and not exc 4 Sqm each complete all as specified.

Taking down shutter of any description exc 1 Sqm and n exc 2 Sqm and removing from site.

S&F factory made 35mm thick flush shutters , solid core construction with block board core and plywood face pannel commercial type on both faces complete all as specified.

S&F factory made 35mm thick 2nd class hardwood plain framed, panneled shutters with lock rail and pannel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rails and stiles as per IS-1003 (Part-1) Kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F factory made 35mm thick 2nd class hardwood glazed and skelton door shutters, open rebated and prepared to receive glass, gauze, (without sash bars) edges for framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-1 section 8 clause 8.24 (a) fitted to chowkats complete all as specified.

S&F solid PVC door frame of size 50mm X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing.

S&F factory made PVC shelter panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement , supplying and fixing in the frame at site as per specification & drawing as specified.

S&F window or ventilators section of frame 72x55mm fixed to wall or concrete surface with rowl plugs made of galvanised steel powder coated and section of shutter 47x20mm mulion section 72x50mm (Based steel as per IS 513 "D" quality galanised as per IS 277 with zinc of 120 gms/sqm) glazed or gauged and wire gauge shutter prepare to receive wire mesh to the shutter (Double door shutter) with total coated thickness of 0.6mm including grills/guard bars made of square bars powder coated fixed to window frame with screws including necessary fittings and all builders hardware such as handles, tower bolts and stays etc complete all as specified and as directed. Make : NCL type-4000 Series (Note : Glass and wiremesh shall be measured and paid separately under respective items)

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified.

M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

S&F 100 mm Butt hinges, Stainless steel and fixed complete all as specified and as directed.

S&F 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified.

S&F 150 mm size extruded aluminium alloy handles fabricated type anodised and fixed.

S&F 250 mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified and as directed.

S&F in repair Mortice lock, vertical type of brass 100 mm 4 Levers with duplicate keys complete all as specified.

S&F in repair aluminium (Die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.

Hacking out old broken glass (any thickness, size, quality or escription) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads complete all as specified.

S&F for Pressed steel frames 125X60mm (made out of 1.25mm thick MS Sheet) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified.

S&F for Pressed steel frames 105X60mm (made out of 1.25mm thick MS Sheet) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified.

M&L for prepration of new Steel surfaces of any description, not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint complete all as specified

Dismantling boarding of any description , fixed in any position with nails complete all as specified and as directed.

S&F 25mm thick flush shutters, as in cupboard , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

S&F 9 mm thick plywood grade BWR type BB fixed with screws to timber framed complete all as specified and as directed.

S&F 18 to 19 mm thick block board grade 2 quality interior grade decorative type with decorative face veneer on one face fixed with screws to timber framework as in shelves, drawers etc complete all as specified and as directed.

S&F 75 mm Butt hinges, Stainless steel and fixed complete all as specified and as directed.

S&F 50 mm dia cup board/ kitchen cabinet knob of wood finish fixed with nut, screw and washer complete all as specified and as directed.

S&F Magnetic catcher 50mm long complete with plate fixed with screws complete all as specified and as directed.

M&L for PVC 18 mm thick decorative lamination board of density 600kg/cbm manufactured by an ISO:9001-2005 certifed with termite proof, water proof & flame retardant PVC Sheet. complete fixed with each other using solvent cement adhesive and stainless steel screws & including required handle, panels shall be fabricated using adhesive and screws and all the edges shall be covered with bonding tape and finished as per manufacturer instruction and all as specified.

M&L for Auto soft closed hinge for PVC laminated board complete all as specifed and as directed

S&F Ventia blind for window including necessary items required for fix to wall complete all as specified

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6) for bedding of tiles complete all as specified.

M&L for 10 mm thick rendering in cement mortar (1:4) on vertical surfaces for backing of tiles complete all as specifed.

M&L for joint free Non- skid ceramic coloured tiles 7 to 8mm thick (Square/ rectangular) area of each tile exceeding 0.11 but n.exc 0.18 Sqm, in floors/shirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L for Coloured Vitrified Ceramic tiles 9-10 mm thick (Square/rectangular) of light Shade , polished, area of each tile not exceeding 0.36 sqm, fixed in floor/skirting etc over set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified.

M&L for joint free Glazed ceramic coloured/ printed tiles in vertical surface of size 350x 250 x 6-7mm/450x 300 x 6-7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on walls as in dado/ skirting etc complete all as specified.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.

M&L for 25 mm thick PCC 1 :2 :4 type B-0 (using 12.50 mm graded stone aggregate) as in flooring finished even and smooth without using extra cement complete all as specified.

M&L for 40mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring finished even and smooth without using extra cement complete all as specified.

M&L for 75 mm thick cement concrete (1:4:8) type D-2 with using 40 mm graded stone aggregates) as in sub base of flooing etc complete all as specified.

M&L for screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified.

M&L for chequered cement concrete coloured tiles 30 cm x 30 cm x 25mm, set jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified.

M&L for cement concrete type B0 1:2:4 (using 12.50 mm graded stone aggregate) as in coping benching, gola, slightly rounded and similar items complete all as specified.

M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggreate), 75 mm thick as in plinth protection including finishing the surface even & smooth without using extra cement complete all as specified.

M&L for cement concrete type B-1 (1:2:4) with using 20mm graded stobe aggrgates) as in surface channels and drains

Dismanting of stone slab and tiles laid bedded and pointed in any mortar of any size description or thickness in floor, appron etc.

M&L for 18-20 mm thick Granite tiles machine cut , bedded and jointed with grey cements slurry and pointed with white or colour cement with admixture of pigment to match the shade of granite stone including grinding & polishing slab over screed bed or bedding layer of mortar 15 mm thick in cement mortar (1 : 4) laid complete all as specified.

M&L for 18-20 mm thick Granite tiles machine cut, in skirting/dado laid over cement mortar and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10 mm thick rendering in cement mortar (1:4) on vertical surfaces for backing of tiles complete all as specified.

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified.

M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6.0 m mean radius built in cement mortar 1:6 complete all as specified.

M&L for brick work with sub class 'B' brick, straight or curved on plan to any radius in half brick works, built in CM 1:4 etc complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with selftapping screws as specified & directed.

Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F rolled mild steel in framed work as in doors or steel gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing conforming to Fe- 290.Gde-E-165 complete all as specified.

S&F framed work such as grills gratings, etc with ends of bar shouldered and/or revited or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings framework of water tanka and similar works confirming to Fe 290 Gde E-165 complete all as specified

S & F Rolled Mild Steel Plates (plain or Chequered) channels, square cut or notched, forming holes, without any attachment confirming to Fe 410-S complete all as specified.

S&F steel work as in tubular, rafters, purlins, posts and similar work (round/sqare/rectangular shape of pipes as approved by Engr-in-charge ) trusses of semi circle/ curved shape up to height 6 mtr including post special shaped washers etc complete incl necessary nut bolts wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 garde St-240

Dismantling ceiling board (fiber, pulp insulation) or insulation board/slabs etc including grid work/wooden or aluminium frame works, cover fillet etc Complete all as specified.

M & L for clip in type armed strong metallic powder coated 0.5mm thick ceiling with GI framework made of standard Tee , Angle or any other section as in grid type ceiling framework as approved by GE . Ceiling shall be hanged to roof trusses / purlin rafters with the help of GI wire not less than 4mm dia at an interval n. exc 1m , the size of the metallic powder coated ceiling tiles 600 mm x 600 mm complete all as specified.

S&F in repair 25 mm outer dia medium weight pipe made out of stainless steel 304 grade, including decorative ornamental knobs at both ends and one set of ornamental decorative Stainless steel clamps to fixed to walls complete all as specified.

S&F in repair white vitreous China wash down water closet pan (pedestal pattern), and trap (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc. complete all as specified.

S&F as in repair vitreous china squatting pan, white, orissa pattern, size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron ‘P’ trap incl lime concrete bedding and making good to the disturbed surface to match with the existing surface of floor complete all as specified and as directed

S&F in repair vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, including cutting for and pinning in ends of brackets complete all as specified.

S&F in repair of plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device complete all as specified.

S&F in repair fancy type Angle stop cock with flange, 15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified.

S&F in repair angular two way angle cock with wall flange, 15 mm nominal bore cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified.

S&F in repair pillar taps, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified.

S&F in repair bib taps, long body, brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified.

S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified.

S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two brass nuts & rubber washers complete all as specified.

S&F in repair tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and as directed

S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified.

S&F in repair Corner glass shelf (with bracket) , fancy type with stainless steel railing fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed.

S&F in repair fancy type central hole basin mixer without PUW with 450 mm flexible hose copper alloy with capstan heads CP screwed down high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified.

S&F in repair chromium plated health faucet telephonic type with 8mm dia, 1 meter long CP flexible with wall hook and jet of approved make, suitable for 15 mm bore iron pipes or for unions and fixed complete all as specified.

S&F in repair soap dish, brass, chromium plated,, fancy type fixed to wall with rawl plugs and chromium plated screws complete all as specified.

S&F in repair toilet paper holder ,brass, chromium plated,, fancy type fixed to wall with rawl plugs and chromium plated screws complete all as specified.

S&F in repair 200 mm dia towel ring ,brass, chromium plated,, fancy type fixed to wall with rawl plugs and chromium plated screws complete all as specified.

S&F in repair towel Rack 600 mm with hanger ,brass, chromium plated,, fancy type fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.

S & F in repairs 900 x 800 x 260 mm plate rank of stainless steel with steel shelves make out of 0.7 mm thick steel sheet and hanging arrangement for utensil including taking down existing complete all as specified and directed

S&F in repair PVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110 mm bore.

S&F in repair PVC (SWR) bends any radius 110mm bore.

S&F in repair PVC (SWR) bends any radius 75mm bore.

S&F in repair PVC (SWR) junction single, (single T) equal or unequal 75 mm bore complete all as specified.

S&F in repair PVC (SWR) junction single, (single T) equal or unequal 110mm bore complete all as specified.

S&F in repair 110mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint fixed to wall.

Dismantling of existing water tanks of steel/PVC/AC of capacity exceeding 250 liters but not exceeding 500 litres complete all as specified.

S&F for rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position all as per SSR Part I complete all as specified.

Dismantling of existing water tanks of steel/PVC/AC of capacity exceeding 500 liters but not exceeding 1000 litres complete all as specified.

S&F for rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position all as per SSR Part I complete all as specified.

S&F in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm bore and fixed, minimum weight of float valve 210 gms complete all as specified.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

M&L for Cutting chases, pinning in. making good to facings where required andpointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall etc complete all as specified.

Supplying and laying of CPVC pipes 16 mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

Supplying and laying of CPVC pipes 20 mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Dismantling fencing wire mesh, any type

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire.

Supplying only Chain link MS galvanisd fencing, any size or type complete all as specified.

S&F 11 to 15 mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other end,or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut but length exc 5 cm and n exc 10 cm long all as specified.

S & F Mild Steel round bar 10 dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips for Gd.I, Fe-432 (Part I) complete all as specified.

Dismantling posts or struts (wood, steel, or RCC) any section, including taking out embedded portion and making good disturbed ground posts embedded in concrete brick work masonry etc

Taking down barbed wire fencing of any description and in any position fixed to RCC/steel posts complete all as specified (each row shall be measured separately)

S&F Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc comlete all as specified (each line wire to be measured).

S&F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes for notching of wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified.

M&L for excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft and loose soil complete all as specified.

M&L for cement concrete type B-2, 1:2:4 (40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified.

S&F in repair re-inforced punched concertina coil of 900mm dia (chrome razer or blade wire) with barbed tape of 0.50 mm thick galvanised steel steel sheet or core wire of dia 2.5mm of high tensile steel wire including galvanised mild steel staple/clips for tying at crossing etc complete all as specified.

Taking down existing unserviceable water proofing treatment from roof slab including plaster and cleaning the roof slab by wire brush and removing the debries and WPT felt beyond the premises of MoD land.

M&L for 15 mm thick plaster in cement mortar (1:3) mixed with water proofing compound on roof slabs finished even and smooth (without using extra cement) after cleaning of roof surfaces with wire brushes complete all as specified and directed by Engr-in-Charge. Notes : WPC shall be measured and paid seperately.

M&L for applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg/Sqm including cleaning surface complete all as specified.

M&L for 3mm thick APP modified prefabricated membrane in five layers & weight not less than 3.6 Kg/Sqm water proof membrane reinforced with non-wooven polyster without aluminium paint over top surface of water proofing membrane with 10cm longitudinal and horizontaling over lapping and joints finally thermo-fused with LPG flames laid over a tack coat of industrial coat of primer as per manufacturer's instructions of APP modified membrane sheet complete all as specified.

Taking down carefully old copper/alluminium point, wiring (light, fan, socket or power) complete, including fitting such as switches, ceiling roses, pendants, regulator socket tube light fitting of any type, Bulk head fitting etc segregation serviceable fitting/fixture and keep them safe custody for reuse and removing materials from the site and making good disturbed surface of walls&floors etc as per existing specification complete all as directed

Taking down old unserviceable main switch, DB's/RCBOs/MCCB/Sheet Metal Enclosures including MCBs & wooden/GI/MS sheet board etc and removing materials from the site of work complete all as directed

Taking down old unserviceable sub main wiring any size/core/type of copper/alluminium conductor. including making good the disturbed surfaces and removing materials from the site of work complete all as directed .

M&L for point wiring complete with stranded copper conductor1.5 sqmm single core (nominal area ) PVC insulated and unsheathed cable 650 volts grade drawn in and including medium duty concealed in PVC concealed conduit conforming to IS and ISI marked not less than 19 mm dia with 1.6mm thick concealed pressed steel terminal boxes with plate and framecover for rquired module including single core stranded copper conductor 1.5 sqmm PVC insulated unsheathed cable in same conduit as earth wire to the common earth and connecting to earth dolly all as specified for

(a) One light point/bell point/one fan/exhanust fan controlled by one,one way switch.

(b) For one 5 pin, socket outlet 5/6 amp on independent board with other switches

(c) For one 3 pin socket outlet 5/6 amp on same board

(d) For one 3 pin socket outlet 5/6 amp on below board

M&L for point wiring complete with stranded copper conductor 4 sqmm single core (nominal area ) PVC insulated and unsheathed cable 650 volts grade drawn in and including medium duty concealed in PVC concealed conduit conforming to IS and ISI marked not less than 19 mm dia with 1.6mm thick concealed pressed steel terminal boxes with plate and framecover for rquired module including single core stranded copper conductor 2.5 sqmm PVC insulated unsheathed cable in same conduit as earth wire to the common earth and connecting to earth dolly all as specified for one 6 pin socket outlet two in one 16/6 amps on an independent board.

S&F for switch modular type single pole one way 6 amps complete all as directed by Engr - in - charge.

S&F Bell push modular type 5 Amp complete all as directed by Engr - in - charge.

S&L switch socket combination 2 in 1, 6 Amp modular Type 5 pin multipurpose suitable for independent board complete all as specified by Engr-in-Charge

S&F socket outlet 2 in 1,3/5 pin 6 Amp modular type multipurpose suitable for same board complete all as specified by Engr-in-Charge rtype

S & F switch socket combination 2 in 1, 5 pin multipurpose 16 A , modular type.

Supply & fix submain wiring alongwith earth wire single core multi stranded copper conductor FRLS unsheathed PVC insualted 1100 V grade cable drawn into and including PVC casing capping sleeves and caps of adequate width and length with accessoris and fittings like bend, crosses wall crossing etc 2x 4.0 sqmm 1x 4.0 sqmm wire Make of wire: Havells/Plaza/Finolex. Make of PVC casing capping: Plaza/Horse/Pesto plus

M&L for PVC/Wooden blocks as suitable to site condition for fixing tube light fitting on wall/ceiling complete all as directed by Engr-in-Charge.

S&F in replacement of tube light fitting 1X20 w,LED Batten wall mounted with alumunium housing and integrated electronic driver . Make havells cat part no LUMLINEPLUSBS20WLED865SPCSSor equuivalent make of phillips,Surya,Bajaj.

S&F in replacement of tube light fitting 1X10 w,LED Batten wall mounted with alumunium housing and integrated electronic driver . Make havells cat part no LUMLINEPLUSBS10WLED865SPCSSor equuivalent make of phillips,Surya,Bajaj.

S&F sheet metal enclosures for DB-4 way, SPN, 200 Amps Bus bar 240 Volts single door

S&F sheet metal enclosures for DB-08 way, SPN, 200 Amps Bus bar 240 Volts Single door

S&F sheet metal enclosures for DB-12 way, SPN, 200 Amps Bus bar 240 Volts Single door

S&F MCB SP 240 volt, 5 to 32 Amps, C series, 10 KA Make : Havell's / Plaza / Legrand

S&F MCB SPN 240 volt, 5 to 32 Amps, C series, 10 KA .Make : Havell's / Plaza / Legrand

S&F electronic type modular , 120 watt -2 modul fan regulator . Make : Anchor/Surya/Havells odulardular

S&F ceiling rose , single phase /PVC /Polycarboante isolated body.

Re fixing of Ceiling rose all as directed by Engr-in-Charge

S&F Bell Multi Music type Make : Anchor/Surya/Havells

M&L for earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less thatn 1.5 meters below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers GI earth wire with protected by 15mm dia light grade GI pipe and other end connected to earth testing point or main controlling switch as directed incl funnel with watering pipe 20mm bore light grade GI pipe, wire mess , charcol and common salt, concrete earth pit in PCC (1:3:6) type C1 cast iron frame cover , including necessary excavation, earth work in soft/loose soil and disposal of soil to a distance not exc 50mtr and necessary testing complete all as shown in electrical plate No 3 of MES schedule Part I and testing all as directed.

S&F Higly efficient LED Bullbs of 15 W

S& F in replacement of decorative wall light fitting made up of high grade engineering plastic material suitable for LED Lamp15/20 w all as directed make Haveiis cat part no LHFDGBE1TZ1W035 OR EQUIVALENT MAKE of phillips /CG/Vipro

M&L in relacement for Decorative garden/gate light , LEXO PRISMATIC ,made up of high grade unbreakable polycarbonate material suitable for upto 20 w LED lampn(b22) Havells cat part no LHFOGAE1T11F015 , retrofit LED suitale to fitted on pipe upto 60mm dia or equivalent make of Philips/CG

M/S CHANDER MUNI

M/s Nikhil Kumar Builders

M/S RK Builders