DAY TO DAY MAINT AND REPAIRS TO BLDGS AT NPO, INDA, BSQ COMNETCEN, NCD, BLO, CE SINGLE SAILORS BLOCK, INS ANGRE AND HQ MNA UNDER AGE B/R-II UNDER GE (NW) KUNJALI, COLABA, MUMBAI

Amount

Taking down chowkat with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each complete all as specified

Taking down chowkat with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4 Sqm each.

Taking down shutters of any description not exc 1 sqm each

Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each

Material & labour for second class hardwood (SAL) plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified.

Material & labour for 35 mm thick second class hard wood plain, framed factory made panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered partical board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I),kiln seasoned and chemically pressure treated complete all as specified.

Supply & Fixing 32mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

Supply & fixing IInd class HW (Sal) glazed and Skelton shutters, 30mm thick, open rebated and prepared to receive glass gauze etc, divided into squares, with plain, chamfered or rounded mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, gauze, etc size of members of shutters as specified in SSR part I, section 8, clause, 8.20 (b) complete all as specified.

Supply & fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & manufacturers instructions.

Supply & fixing 30 mm thick factory made solid panel PVC door shutter (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification & manufacturers instructions.

Supply & fixing powder coated aluminium sections for partitions, windows, ventilators and doors including fabrication of frame/shutters and fixing to walls/floors with necessary lugs, cleats etc including all accessories such as glazing clips, handles, tower bolts, rollers rubber beadings for fixing glass panes in frame including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required complete all as specified Note: - (i) Glass panes will be measured & paid separately. (ii) Rubber beading will not be weighed and paid separately (iii) Minimum thickness of powder coating shall be 25 micron.

Supply & Fixing in repair aluminium grill with and including suitable aluminium anodised frame F/H section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre complete as directed by Engr- in- charge.

Supply & Fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple complete all as specified.

Supply & Fixing in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple complete all as specified.

Supply & Fixing 12mm thick prelaminated medium density particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and directed.

Supply & Fixing 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts ISI marked complete all as specified.

Supply & Fixing aluminium anodized barrel tower bolts 200 mm size of extruded section ISI marked complete all as specified.

Supply & Fixing aluminium anodized barrel tower bolts 150 mm size of extruded section ISI marked complete all as specified.

Supply & Fixing 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified.

Supply & fixing 100 mm long stainless steel butt hinges medium weight with stainless steel hinge pin, bright finished.

Supply & Fixing in repair 100 mm size mortice lock with two lever (vertical type) brass body and fixed complete all as specified.

Supply & fixing MS work as in holdfast and similar articles conforming to grade Fe 410-0 and Fe 310-0.

Supply & Fixing in repairs 140 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring ISI marked complete all as specified.

Supply & Fixing Aluminium extruded body door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg ISI marked complete all as specified.

Supply & Fixing in repairs mild steel, 300 mm long ordinary helical door spring including roller and roller plate complete all as specified.

Easing and adjusting of existing doors / windows shutters of any description like wooden, iron, aluminium etc complete all as directed at site.

Supply & Fixing brass Key lock round knob type(locking mechanisum) easy push button facility for locking inside suitable for all doors all as specified and as directed Make Godrej and equivalent.

Taking down and re-fixing of old aluminum doors Shutter in same opening with necessary required repairs and fittings including galss rubber beading, door frame rubber beading and glazing clips aand making the shutter serviceable area exc. 2 Sqm and n.exc 4.00 sqm each complete all as specified and directed. Note-Glass pane, floor hydrolic spring handles, mortice lock and tower bolt will be measured and paid seperately.

Taking down and re-fixing of old aluminum doors Shutter in same opening with necessary required repairs and fittings including galss rubber beading, door frame rubber beading and glazing clips aand making the shutter serviceable area n.exc 2.00 sqm each complete all as specified and directed. Note-Glass pane, floor hydrolic spring handles, mortice lock and tower bolt will be measured and paid seperately.

Material & labour for repairs to steel windows/doors by using welding machine where necessary thicknesss of each welding spot exceeding 6mm but not exceeding 9mm complete all as directed at site including all Material and Labour

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets etc all as directed.

Supply & fixing aluminium anodized snap grid of size 605 x 605 mm with aluminium anodized angle 20mm x 20mm x 1.2mm fixed along the wall and main and cross tees of size 36.5mm x 23.5mm x 1.5mm and 23.5mm x 23.5mm x 1.5mm respectively with ceiling cleats / angle brackets of size 15mm x 15mm x 1.5mm including suspended GI wire hangers 6mm dia.upto 1200mm length with adjusting level and fixed to roof slabs by means of ceiling cleats made out of GI flat 40mm x 3mm x 60mm long and expansion hold fasteners 12.5mm dia. 40mm long @ 20cm c/c including dismantling carefully old false ceiling with ceiling boards, electrical fittings, fan, fire sencers etc and making good disturbed surface as per existing complete all as specified and directed . Note- New ceiling board will be measured & paid separately

Material & labour for 4 mm thick high pressure steam cured non asbestos fiber cement designer ceiling board having dennsity>1200Kg/Cum of size 600mm x 600mm complete all as per manufacture's instructions and directed by Engineer-in-Charge.

Material & Labour for POP false ceiling using 600X900x12 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50x25 mm spaced at 750 mm centre, secondary joist of size 75X20 mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @1.2 mtr c/c complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 16 mm thick perforated particle board/ tiles for insulation and accoustic purpose, 600mm x 600mm in size, fixed with staples on snap grid complete all as directed and approved and specified.

Supply & Fixing 3 mm thick aluminium composite panel cladding plain of approved colour/shade to beam/column/slab incircular/ rectangular shape inbcluding cutting, notching, bending to shape as required jointing with silicon gel of approved colour & aluminum tubular hallow section 25 x 25 mm not exceeding 900 mm C/C on exceeding column/beam/slab to hold APC cladding etc (Note : colour/pattern of ACP sheet shall be approved by Engr-in-charge)

Supply & Fixing 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing in SSR Part I and Part II.

Supply & Fixing PVC wall /ceiling paneling consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing in SSR Part I and Part II

Supply & Fixing in repairs 18/19 mm thcik prelaminated partical board exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screw to frame work in cupboard including 6 mm thick teak wood beading on exposed faces including applying two coats of French polish to beading complete all as specified and directed.

Material & Labour for 12mm thick plywood, grade BWP type BB, fixed with screws to timber frame as in paneling/partition etc complete all as specified and as directed.

Material & Labour for 0.9mm thick decorative texture finish laminate type 1, of surface finish colour and pattern as approved fixed with adhesive as per makers instructions and as directed.

Supply & Fixing 2mm thick Linoleum, plain coloured laid in floors including streching, cutting , fitting and sealed down with an approved adhesive as per manufacturers instructions and as directed.

Supply & Fixing in repairs wall paper of fibrious material, non woven vinyl free and fixed to wall with dry strips or with approved adhesive as per manufacturers instructions. Note - Design and pattern shall be approved by GE

Supply & Fixing 1st class hard wood (teak) moulding as in cornices, joints of wall panelling board etc sectional area not exc 6 sqcm including applying two coats of french polish complete all as specified and as directed..

Supply & Fixing 2nd class HW (Sal) plain fillets clean sawn square, rectangular or triangular in section, sectional area exc 13 but n.exc 25 sqcm fixed with nails all as specified and directed.

Supply & Fixing in repair coloured powder coated Drapery Rod of aluminum 25mm inner dia With suppored on coloured powder coated aluminum decorative type bracketson both ends complete all as specified . Note - Design and pattern shall be approved by GE

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.

Material & labour for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; walkj ways, railings, frame work for water tanks and similar work conforming to Fe 290 Gd E-165 complete all as specified .

Supply & Fixing steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS -1161 1979 grade St-240 complete all as specified .

Material & labour for 12mm thick toughened glass door , double shutter including providing SS pivots, door closer, SS corner supports as required, SS handle 600mm long fixed on both shutter, SS studs 1200mm long, locking arrangement and necessary SS accessories like clamps as required at site complete all as directed.

Supply & Fixing double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium ally sheet foundation box, main body with stainless steel cover, governing pivot made of bras, other parts made of mild steel heavy duty and fixed all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete all as specified.

Supply & Fixing 3mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete all as specified.

Supply & Fixing in repair 100 mm size mortice lock with two lever (vertical type) brass body and fixed complete all as specified.

Supply & Fixing solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturer including removal of existing solar film complete all as specified.

Supply & Fixing 4 mm thick bakelite sheet with decorative choice laminated on both sides complete all as specified and as directed.

Supply & Fixing in repairs PVC modular section 20mm thick as in profile including 'C' channels, aluminium all around the profile complete all as specified and as directed.

Supply & Fixing in repairs Roller venetion blinds made out of special fabric to resist dust and water of approved texture by GE with necessary accessories complete all as specified and as directed.

Dismantling plain or corrugated steel/AC roof sheets any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and as directed.

Supply & Fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws complete all as specified and as directed.

Supply & Fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land. Note: The place of disposal shall be find out by the contractor.

Demolition of brick work or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles including copings etc.and removing debris outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

Material & Labour for brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and as directed.

Material & Labour for brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

Material & labour for rendering 15mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar (1:6) and finished even and smooth with and including 1 mm thick neeru complete all as specified.

Material & labour for rendering 5 mm thick on fair faces of concrete surfaces in ceiling in cement mortar (1:3) and finished even and smooth without using extra cement complete all as specified.

Material & Labour for preparation of old painted surface by complete removal of existing treatment/ new plastered surfaces of wall and applying 4mm thick finished texture mortar in CM 1:2 (Mix one part of white cement & two parts of Dholpuri clear quarts powder of 1 to 2 mm grading) and texture finish shall be achieved with the help of hand driven machine as per stone masonary pattern including irrection & dismantling of scaffolding to carrying out works upto triple stories Bldg complete all as per manufactures instructions and as directed.

Material & labour for rendering 20mm thick in two coats(15mm inner coat + 5mm finishing coat) on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with integral water proofing compound @ 3% by weight of cement and finished fair and even including necessary scaffolding and safety arrangement for high rise bldgscomplete all as specified and directed by Engr-in-Charge. Note- Water proofing compoundshall be measured and paid for separately.

Supply only integral water proofing compound .

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removal of debris out of MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

Demolition of RCC of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition and separating, scraping and cleaning of reinforcement and removing debris outside MD land. Note: The place of disposal shall be find out by the contractor.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including removal of rubbish out side MD land. Note: The place of disposal shall be find out by the contractor.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing debris outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

Material & Labour for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete

Material & Labour for reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in chajjas, slabs, beams etc including necessary form work for fair finished surfaces of concrete flat.

Material & labour for TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with the clips complete all as specified .

Ditto- all as per item No 78.00 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders.

Material & Labour for taking down existing tarfelt and old concrete/ plaster from roof top, roughening surfaces of old concrete surfaces by picking, sweeping, cleaning and washing down with water to remove all loose dirt, dust etc and applying 15 mm thick rendering in cement mortar 1:4 mixed with water proofing compound on PCC padding as per manufacturer instructions and finished even and smooth without using extra cement including removing debries outsode MD land complete all as specified . Note -i) WPC shall be measured and paid separately. ii) The place of disposal shall be find out by the contractor.

Material & Labour for cement concrete 1:3:6 type C-1, (using 20 mm graded stone aggregate) as in foundation, filling in sunken floors etc complete all as specified and directed.

Material & Labour for PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) as a leveling course/ padding on roof surfaces to maintain proper slope and finished fair and even complete all as specified

Material & Labour for 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in sub base.

Material & labour for preparing roof surfaces and applying water proofing treatment as per manufacturers instructions and comprises of the following activities:- (a) Apply one coat of bituminous primer @ 0.25 Kg per Sqm. (b) Providing and laying 3 mm thick APP (Atatic poly propylele) modified polyester reinforced water proofing membrane with minimum weight of 3.50 Kg/Sqm. The APP membrane shall be laid using torch application method with minimum 100 mm side overlap and 150 mm end overlap and ensure that a constant flow of bitumen is maintained across the whole width of a role and that a bead of bitumen is extruded from all edges to obtain a good seal.The APP membrane shall be taken upto minimum 200 mm on vertial surfaces. All the edges of the membrane shall be sealed with sealant. The rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slope towards rain water pipe outlet. (c) Apply solar reflective bituminous aluminium paint @ 100 gm/Sqm (d) Ponding test including supply of water for 72 hours after completion of water proofing work. Note - (i) Irrespective of lap the net covered area shall only be measured and paid. ii) The laying of membrane shall be got done through an authorised applicator of manufacturer of the membrane.

Material & labour for preparing sunken portion of RCC floors and walls by wire brush to remove dirt, dust etc cleaning with water and applying water proofing treatment as per manufacturers instructions and comprises of the following activities:- i) Providing 50 mm bore and 350 mm long medium grade GI pipe spouts with GI wire mesh on inside mouth after removing existing pipe and sealed the surrounding of GI pipe and junctions with epoxy mortar. ii) Applying rendering 6 mm thick in cement mortar (1:4) mixed with integral WPC on floor and wall surfaces upto 100 mm above FFL of sunken portion and finished even and smooth without using extra cement. iii) Fill the water and check for dampness and seepage. iv) Apply two coats of polymer modified cementious water proofing coating of minimum thickness of 1 mm for each layer as per manufacturers instructions on floor & walls (upto 100 mm above FFL) and spray coarse sand on surface when the second layer is still sticky. v) All pipes laid in sunken portions shall be covered with 50 mm thick PCC 1:3:6 type C1 all around after painting with anti corrosive black japan paint on GI/CI pipes. vi) Rendering 20 mm thick in CM (1:4) mixed with integral WPC floor and wall surfaces including rounding of corners and junctions stoping towareds spouts. vii) Test the water proofing area by filling water for 72 hours and tested for leakage/seepage to the entire satisfaction of GE. viii) Apply two coats of hot blown bitumen @ 1.5 Kg /Sqm for each coat and laying 50 micron black polythene film in floors. Note : a)If leakage/Seepage occured after filling water, the above said treatment shall be re-done completely without any extra cost. b) WPC will be measured and paid seperately.

Material & Labour for Non skid coloured ceramic tiles 7 to 8 mm thick (square/Rectanglar) area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm laid in floor over and including 20mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour for Non skid coloured ceramic tiles 7 to 8 mm thick (square/Rectanglar) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm laid in floor over and including 20mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour for coloured glazed ceramic tiles 450mm x 300mm x 7mm thick but laid on vertical surfaces such as skirting/dado laid over and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour for 10mm thick double charged vitrified ceramic tiles, premium quality of approved colour (square/rectangular) polished, area of each tiles not exceeding 0.36sqm (600x600mm), laid in floor over and including 20mm thick screed bed or bedding layer in cement mortar ( (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour 10mm thick double charged vitrified ceramic tiles, premium quality of approved colour (square/rectangular) polished, area of each tiles not exceeding 0.36sqm (600x600mm), as in vertical surfaces such as skirting/dado etc., laid over and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour for 20 mm thick maching cut machine polished granite slab as in floor laid over and including 20mm thick screed bed or bedding layer in cement mortar ( (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour for 20 mm thick maching cut machine polished granite slab as in skirting/ vertical surfaces i.e jambs /risers and pillars etc laid over and including 10 mm thick backing coat in cement mortar 1:3 and jointed with grey cement paste and pointed with white cement with admixture of pigment to match the shade of granite stone complete all as specified and directed.

Material & Labour 20 mm thick machine cut machine polished Granite slab (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like laid over and including 20 mm thick screed bed in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

Rounding to edges of stone slabs on edge, such as in steps, cooking platform and making grooves for lining and other similar work complete all as specified and directed.

Material & Labour for 20mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. laid over and including 20mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including making 02 Nos grooves in steps and rubbing, cutting and polishing as specified in SSR Part I complete all as specified.

M &L for machine cut kota stone slab 18 to 20 mm thick as in vertical surfaces such as skirting/dado laid over and including 15mm thick backing coat in CM (1:4), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile including rubbing, cutting and polishing as specified in SSR Part I complete all as specified.

Material & Labour for machine cut cudappa stone slab 20-25 mm thick fixed independently and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Material & Labour for machine cut, machine polished Italian Marble stone 16/18 mm thick as in floor laid over and including 15mm thick screed bed or bedding layer in cement mortar ( (1:4), set and jointed in neat white cement slurry and pointed in white cement to match the shade of tile complete all as specified.

Material & Labour for machine cut, machine polished Italian Marble stone 16/18 mm thick as in skirting/dado laid over and including 10 mm thick backing coat in cement mortar 1:3 and jointed with white cement paste and pointed with white cement to match the shade of granite stone complete all as specified and directed.

Material & labour for grinding and polishing with machine the existing Kota stone,mosaic,cuddappa stone after cleaning with mild acid/detergent solution and filling/pointing the joints of tiles with white cement mixed with pigment to match the colour of tiles as specified in SSR Part I complete all as specified.

Material & labour for machine pressed prepainted precast concrete inter locking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints and gently rolled with vibrator complete all as specified .

Material & labour for chequred cement concrete tiles 30cm x 30cm x 25mm thick, as in floor, laid over and including 15mm thick screed bed in CM 1:4, set, jointed and pointed in neat cement slurry and pointed with mixture of gray cement and pigment to match the shade of the tiles complete all as specified and directed by Engr-in-Charge.

Supply & fixing 15 mm bore GI tubing medium grade including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings with suitable size GI clamps or laid in floors including taking down old GI tubing including fittings complete all as specified.

Supply & fixing 20 mm bore GI tubing medium gradeincluding all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings with suitable size GI clamps or laid in floors including taking down old GI tubing including fittings complete all as specified.

Supply & Fixing in repairs 15 mm bore stop/angle cock cast copper alloy, chromium plated, fancy type screwed for iron pipe and fixed complete all as specified.

Supply & Fixing in repairs 15 mm bore stop/angle cock cast copper alloy, chromium plated, fancy type with long shank and cup (concealed type) screwed for iron pipe and fixed complete all as specified.

Supply & Fixing in repairs 15 mm bore bib cock cast copper alloy, chromium plated, fancy type screwed for iron pipe and fixed complete all as specified.

Supply & Fixing in repairs 15 mm bore bib cock two way cast copper alloy, chromium plated, fancy type screwed for iron pipe and fixed complete all as specified.

Supply & Fixing in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 90gms) complete all as specified.

Supply & fixing in repairs 125 mm dia shower rose, brass chromium plated with swivel joints and fixing to 15 mm bore water tubing complete all as specified.

Supply & fixing in repairs 15 mm bore pillar taps cast copper alloy,chromium plated fancy type with capstan heads screwed down high pressure with or without lettered `Hot' or `Cold' with long screwed shanks and fly nuts screwed for iron pipe or brass ferrule complete all as specified.

Supply & Fixing 15 mm bore UPVC pipes of pressure rating 10 Kgf/cm2 including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings with suitable size GI clamps or laid in floors complete all as specified.

Supply & Fixing 20 mm bore UPVC pipes of pressure rating 10 Kgf/cm2 fixed including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings with suitable size GI clamps or laid in floors complete all as specified.

Supply & fixing PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified.

Supply & fixing PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified.

Supply & fixing in repairs GI fittings medium grade ISI marked like Elbow, socket, nipple, union, tee etc suitable for 15mm bore GI pipe complete all as directed at site.

Supply & fixing in repairs GI fittings medium grade ISI marked like Elbow, socket, nipple, union, tee etc suitable for 20mm bore GI pipe complete all as directed at site.

Supply & Fixing in repairs rotational moulded polythylene water storage loft tank of 300 ltr capacity including all connections for inlet, outlet, over flow and wash out etc including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) hoisted and fixed in position all as specified in SSR Part-I

Supply & Fixing in repairs rotational moulded polythylene water storage loft tank of 1000 ltr capacity including all connections for inlet, outlet, over flow and wash out etc including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) hoisted and fixed in position all as specified in SSR Part-I

Supply & Fixing in repair 500 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) including all connections for inlet, outlet, over flow and wash out etc hoisted and fixed in position all as specified in SSR Part-I

Supply & Fixing in repairs 15mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minium weight 142 gms) complete as directed by Engr-in-charge.

Supply & Fixing in repairs 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms) all as specified and directed.

Material & Labour for opening of air lock/blockage in GI pipe line from out let of water tank to all internal GI pipe fittings to smooth flow of water from Bib taps/shower/WHB pillar tap/Stop valves complete by Air pressure/ water gravity pressure etc. complete all as specified & directed by Engr-in-charge.

Supply & Fixing in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to trap and drain (or outgoing pipe) and to flushing pipe, antisyphoage pipe etc complete all as specified.

Supply & fixing in repairs vitreous china squatting pan, ‘Orissa’ pattern of size 580 x 440 mm white, with integral foot rest (excluding flushing Cistern, flush pipe etc) including 'P' or S trap and provision of lime concrete bedding complete all as specified.

Supply & Fixing in repairs Rimless, Blind Installation Wall Hung WC vitreous china with UF soft close slim seat cover, Hinges, Accessories Set, Size : 370x490x365 mm, S trap-300mm, including connecting piece and making all connections complete all as specified and directed by Engr-in-Charge .

Supply & Fixing in repairs Rimless, Blind Installation Wall Hung WC vitreous china with UF soft close slim seat cover, Hinges, Accessories Set, Size : 380x660x765mm, S trap-300mm, including connecting piece and making all connections complete all as specified and directed by Engr-in-Charge .

Supply & Fixing in repairs Water Closet, Cistern and seat cover of single flush cistern, fitting and fixing accessories, size 380x700x820mm, P or S trap complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in repairs, Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engr-in-Charge.

Supply & Fixing cast iron 'S or P' trap 100mm bore and making all connections complete all as specified.

Supply & fixing in repairs low level PVC flushing cistern of heavy duty, 10 Ltrs capacity, syphonic action type complete with inlet, ball valve, float and handle including cast iron bracket and connecting to WC complete all as specified.

Supply & Fixing in repairs Flush pipe of Polyethylene of low or high density or PVC, 32 mm dia. for low level cistern

Supply & Fixing in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified.

Supply & Fixing in repairs health faucet (ABS Body) Stainless steel suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete as per approved sample & directed by the Engr-in-Charge

Supply & Fixing in repair wash hand basin vitreous china white (flat back) of size 550x400mm including bracket, 15mm dia PTMT connections, 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified,

Supply & Fixing Under Counter vitreous china wash Basin of Size:605x430x200 mm including 32 mm dia brass CP waste coupling , 32mm dia PVC waste pipe 90cm long and making all connections complete all as specified and as directed by Engr-in-Charge. Note - i) Basin surface shall be provided anti bacterial glaze of fluoro polymer coating of 20 to 100 nanometer thickness and manufacturers test reportsshall be submitted . ii) Contractor shall submit manufacturers test reports for load bearing capacity shall be 100 Kg, autoclave test for craze resistance, chemical resistance tast to negate the possibilityof stains, spectro photometer test for colour stabilityand flushing test for 100 ball test and ink test. iii) Ten years warranty from manufacturers shall be submitted

Supply & fixing in repair wash hand basin vitreous china thin Rim Table Top Basin, Rectangular, of Size: 495x395x150 mm including 32 mm dia brass CP waste coupling , 32mm dia PVC waste pipe 90cm long and making all connections complete all as specified and as directed by Engr-in-Charge. Note - i) Basin surface shall be provided anti bacterial glaze of fluoro polymer coating of 20 to 100 nanometer thickness and manufacturers test reportsshall be submitted . ii) Contractor shall submit manufacturers test reports for load bearing capacity shall be 100 Kg, autoclave test for craze resistance, chemical resistance tast to negate the possibilityof stains, spectro photometer test for colour stabilityand flushing test for 100 ball test and ink test. iii) Ten years warranty from manufacturers shall be submitted

Supply & Fixing in repair stainless steel sink made out of 1 mm thick sheet kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified.

Supply & Fixing in repairs Stainless steel plate rack with 0.5mm thickness SS sheet, SS screws, SS round pipe etc wall mounted drying self, kitchen utensils, items and organizer of size 36" x 30" x 12" complete all as specified and of pattern as approved by GE

Supply & Fixing Stainless steel locks suitable for cupboards, drawers etc

Supply & Fixing in repair stainless steel sink with drainage board made out of 1mm thick stainless steel sheet for kitchen with plug, washers and waste pipe incl bedding in cement mortar to dward wall or including fixing cantilever brackets and connecting union to pipe overall size 915 x 460mm and bowl size 410 x 330 x 160mm complete all as specified..

Supply & Fixing vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe ) but including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) fixed in repair complete all as specified.

Supply & Fixing in repairs vitreous china urinals, bowl type, flat back, size 465 X 355 X 265mm, white, with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in CM 1: 2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.(Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified.

Supply & Fixing in repair vitreous china urinal pot with sensor of Size 370mm x 390mm x 610mm Star white (Senso Art) including making all connections complete all as specified and directed.

Supply & Fixing in repair Battery operated urinal sensor Flushing as per existing complete all as specified and directed by Engr-in-Charge

Material & Labour 32mm dia CP waste coupling, for glazed ware sinks, basin, Urinals etc with long shanks and fly, flange end.complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing in repairs stainless steel Soap dish of any type fixed to plugs with chromium plated brass screws complete all as specified and as directed by Engr-in-Charge

Supply & fixing 8 mm thick corner glass shelves half round of average radius 200mm including fixing with D type CP brass brackets and stainless steel railing along edges of shelf complete all as specified and directed.

Supply & Fixing in repairs stainless steel towel ring square with round flange of size 210mm x 210mm complete all as specified and as directed by Engr-in-Charge

Supply & fixing in repairs 20 mm dia brass chromium plated 'D' type towel rail 60 cm long fancy type including necessary brackets and fixed to wall with CP brass screws complete all as specified.

Supply & Fixing in repairs 125 mm dia stainless steel grating fixed in position complete

Supply & Fixing in repairs 150 mm dia stainless steel grating fixed in position complete

Supply & fixing in repair of good quality PVC syphon kit including float set for low level flushing cistern of 10 ltrs capacity complete all as directed.

Checking and attending to water leakage from taps or WCs or flushing cistern or or urinals or wash basins or bottle traps etc and any obstruction to water supply requiring plumber work and carry out minor repairs such like replacement of washers, check nuts, tightening of fittings, adjustment of float valves and syphon fittings of flushing cistern, cleaning of bottle traps etc including cost of petty materials like washers of all size, safeda, thread (soot), M-seal, white cement, screws, nails to make it functional and leak proof all as specified and directed by Engineer-in-Charge (Note : If any item if fitting is not serviceable the item will be replaced and the material will be measured and paid at supply only rates)

Supply only spindles of brass ISI marked of any size required for bib taps, pillar cocks, stop cocks, angle valves, concealed valves complete all as directed by Engineer-in-Charge.

Supply and fixing in repairs PVC waste pipe 32mm bore complete, all as specified

Supply and fixing in repairs PVC waste pipe 40mm bore complete, all as specified

Supply & Fixing in repairs 110mm bore PVC (SWR) pipes single socketed in any length wirh rubber ring joints fixed to walls with suitable size GI clamps.

Supply & Fixing in repairs 75mm bore PVC (SWR) pipes single socketed in any length wirh rubber ring joints fixed to walls with suitable size GI clamps.

Supply & fixing 110 mm bore PVC(SWR) bend any radius, with rubber ring joints.

Supply & fixing 75 mm bore PVC(SWR) bend any radius, with rubber ring joints.

Supply & fixing 110 mm bore PVC(SWR) bend any radius, provided with access door with rubber ring joints.

Supply & fixing 75 mm bore PVC(SWR) bend any radius, provided with access door with rubber ring joints.

Supply & Fixing 110 mm bore PVC (SWR) branch piece,single (single Y) equal or unequal fixed with rubber ring joints.

Supply & Fixing 75 mm bore PVC (SWR) branch piece,single (single Y) equal or unequal fixed with rubber ring joints.

Supply & Fixing 110 mm bore PVC (SWR) vent cowl fixed with rubber ring joints.

Supply & Fixing 75 mm bore PVC (SWR) vent cowl fixed with rubber ring joints.

Supply & fixing in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement, diameter of outlet 75 mm.

Supply & Fixing in repairs 160 mm bore PVC (SWR) pipes single socketed in any length including fixing clips, bends, elbow, shoes, etc fixed with rubber ring joints to walls, ceilings with suitable size GI clamps or laid in floor complete all as specified. Note :- Measurement shall be taken along the centre line of the pipes.

Supply & Fixing in repairs 160 mm dia bore PVC (SWR) single/double 'Y' or 'T' with access doors any radius fixed with rubber ring joints complete all as specified and as directed .

Material & Labour for applying 1 to 2 mm thick wall care putty for making the surface even & smooth complete all as specified and directed by the Engineer-in-Charge.

Material & labour for preparing new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified.

Material & labour for preparing new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified.

Material & Labour for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weeather proof acrylic base paint (100 % acrylic) over one coat of self primer including necessary scaffolding for high rise bldgs complete all as specified and as directed by Engr in-Charge

Material & Labour for preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material & Labour for preparation of new wooden surfaes of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material & Labour for preparation of surfaces of paver block, chequered tiles etc by cleaning with water to remove loose dust and screb with wire brush to remove algae, fungus and moss groth and applying two coats of floor coat emulson paint complete all as specified and directed. Note - Floor coat emulsion shall be with abrasion resistance and high adhesion strength and formulated to handle vehiculer and human trafic.

Material & Labour for gentaly cleaning the surface of the stone masonry/ stone chips and piers with specialized water misting techniques using air water jet with fine nozzle sprinkling system calibrated to spray a fine mist along the stone surface without over wetting followed up by gentle brushing with soft nylon brushes as specified . Gentle surface cleaning may include using water misting and PH balanced surfactants as specified for indicated areas to remove surface dirt, grit, surface accretions, lime wash painting etc including necessary scaffolding for high rise bldgs complete all as specified and as directed by Engr in-Charge Note : Quoted rate shall be inclusive of removing vegetation on wall surfaces.

Material & Labour for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and directed

Material & Labour for preparation of old decorated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed.

Material & Labour preparation of old decorated surfaces of walls, soffits, roof facia & applying one coat of weather proof acrylic based paint (100% acrylic) with necessary scafolding for high rise bldgs etc all as specified & directed.

Material & labour for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats to achive desired finish as directed.

Material & Labour for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint including necessary scafolding for external side of high rise bldgs complete all as specified and directed.

Material & Labour for preparation of old painted wooden surfaes of any description over 10cm width or girth and applying one coat of synthetic enamel paint including necessary scafolding for external side of high rise bldgs complete all as specified and directed.

Pragathi Infrastructure Co. (BID ID -3118518)

Satyanarayan Trading Co. (BID ID -3119025)

SHREE JAGDISH FURNITURE CO. (BID ID -3113784)

Nilesh Construction (BID ID -3118781)

MADHU ENTERPRIZES (BID ID -3118400)

SHRI SAI ENTERPRISES (BID ID -3114975)

Genius Construction Co. (BID ID -3118166)