Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹19.9 LAccepted-Finance | 1 | Accepted-Finance Technical and financial bid are in order. | |
| 2 | 2₹24.4 L+₹4.5 L (22.3%)Accepted-Finance | 2 | Accepted-Finance Technical and financial bid are in order. | |
| 3 | 3₹26.7 L+₹6.7 L (33.8%)Accepted-Finance | 3 | Accepted-Finance Technical and financial bid are in order. |
Tender Value
₹30.2 L
EMD Value
₹60,461
Closing Date
25 Oct 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE, NACD, APWD, Mayabunder
EE, NACD, APWD, Mayabunder
Repair of damage RCC column, beam and slab of old block of Boys Hostel by Retro fittings of MGG College at Karmatang under Sub Division No.I, NACD, APWD, Mayabunder
2023_APWD_11897_1
NIT No. 84/2023-24/EE/NACD
Open Tender
Civil Works - Buildings
Works
180 days
EE, NACD, APWD, Mayabunder
Please refer Tender documents.
6 documents required · 6 mandatory
₹0
₹60,461
31 Oct 2023
9 Oct 2023
26 Oct 2023
9 Oct 2023
25 Oct 2023
9 Oct 2023
Amount
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :
Two or more coats on new work
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
With cement mortar 1:4 (1 cement : 4 fine sand)
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
Bars upto 12 mm diameter
Bars above 12 mm diameter
Surfacing preparation to micro concret by chipping to depth of maximum 75mm cleaning removing the traces of dust, loose concrete including the cost of labour charges, minor tools etc. complete.
Replacement of reinforcement as additional bars including bending, cutting, welding and fixing, excluding cost of steel, all labours, charges, minor tools etc. complete (Steel shall be issued by the department on free of cost at store).
Supplying preparing and priming the reinforcement steel with epoxy zinc. Primer or epoxy anti- corosive paint (Conforming to having IS/ BIS certification) including the cost of all materials, labour, minor tools etc.
Supply and application of epoxy concrete bonding agent (confirming to and having BIS 6319 certification) and over clean and properly prepared old concrete surface to give good bonding between old and new concrete, including cost of all materials minoe tools etc.
Supplying and fixing foam work and shuttering to receive the micro concrete including cost of all materials, all labour charges, minor tools etc. complete.
Supplying and applying high strength non shrink cementinous free flow concrete (with minimum 28 days flexural strength 50kg/sq.cm and compressive strength 500 kg/sq.cm as per BIS 4551-80) for above water level on site to enable completion of pouring in a continous operation. An approved grout concrete mixture of slow speed heavy duty drill and exact quantity of water as recommended should be poured into the vessel slowly and mix the same throughly in a forced action. The mix materials should be placed immediately to position foam work continously to an average thickness of 50mm without any gap including all materials and labour charges etc. complete.
Supplying, mixing and applying curing membrane or equivalent with water including cost of all materials, all labour charges, minor tools etc. complete.
R BAGAVATHI PANDIAN
BHAGWAN SINGH
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .