PROVISION OF BLACK TOP HARD STANDING, 01 GUARD ROOM WITH SENTRY POST AND 02 GATES AT CVY GROUND OF TRANSIT CAMP AT KARU UNDER GE 860 EWS

Amount

NOTE: Schedule ‘A’ Part - I to Part -X are Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Total amount of Sch 'A' Part - I (Buildings)

Total amount of Sch 'A' Part - II (Internal water supply)

Total amount of Sch ‘A’ Part - III (Internal Electrification)

Total amount of Sch ‘A’ Part - IV (Road / hardstanding)

Total amount of Sch ‘A’ Part - V (External Water Supply)

Total amount of Sch 'A' Part - VI (External Electric Supply)

Total amount of Sch 'A' Part - VII (Sewage Disposal)

Total amount of Sch ‘A’ Part - VIII (Security fencing and Gate)

Total amount of Sch ‘A’ Part - IX (Protective work)

Total amount of Sch ‘A’ Part - X (Site clearance, Excavation and Earth work)

SCH 'A PART - XI (Miscellaneous B/R and E/M works) Note: This schedule is not pre-priced by MES and the rate indicated as "Rs 0.00" under Col 5 signifies this fact only

S&F LED Lamp 07 Watt suitable for lamp holder, complete all as specified and directed. Make : Philips/ Wipro/ Havells

S&F wall mounted LED Light Fitting 18 Watt, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete and making necessary electrical connection all as specified and directed. Make : Philips/ Wipro/ Havells HAVELLS Cat Part No. LUMILINEBS18W LED830SPCWH or WIPRO Cat Part No. 22W6500K or PHILIPS Cat Part No. BN021

S&F wall mounted LED Light Fitting 10Watts extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete and making necessary electrical connection all as specified and directed. Make : Philips/ Wipro/ Havells HAVELLS Cat Part No. LUMILINEBS9W LED865SPCWH or WIPRO Cat Part No. 10W6500K or equivalent model of PHILIPS

S&F high power LED Street light fitting 25 watt wall mounted IP 66 Energy saving & enviromnemtal friendly long life versatile pressure die-cast aluminium IP65 roadway luminaire with high power LED's as light source and eletronic driver including 32mm dia light grade GI pipe service bracket of minimum length 3mtr, 1.5mtr along the length of pole and 1.5mtr at an angle of 45 deg, fixed with clamps, nut, bolt and washer and electric connection with 1.5 Sqmm multistranded twin core copper cable PVC insulated from ceiling rose to fitting complete all as specified and directed. Make : Philips/ Wipro/ Havells HAVELLS Cat Part No. ENDRAPEARLS25WLED737SA54TOPC or WIPRO Cat Part No. 30W6500K or PHILIPS Cat Part No. BRPO42

Supply and fix 1.5 sqmm 1100 volts grade PVC insulated sheathed twin core multi stranded copper conductor cable complete all as specified and directed.

Supply and fix FR/ PVC pole box of size 210mm x 160mm x 98mm for loop in and loop out including 3 pole and neutral bakelite connector and one SP 6 Amps MCB and necessary clamps and nut bolts for fixing arrangements complete all as specified and directed.

M & L for preparing bituminous surfaces of road and marking 2.5 mm thick centre lines, stop lines, dashes, arrows etc and the like n. exc 10 cm wide on roads pavements using hot applied thermoplastic road marking paint of white or golden yellow colour as approved confirming to BS 3262-1989, applied with special applicator machine, mixed with radium glass beads @ 250gm/Sqm, to provide reflectivity and night vision (approximate temperature being 200 degree at the time of laying) all as per manufacturers instruction complete all as specified and as directed.

M & L for Cutting and tapping in 50 mm water mains ( in position) for branch connections including provision of GI -Tee of required size to connect the proposed 25 mm GI pipe line including required Tee,bends,short pieces caps,plugs and unions etc all as specified including earth work.

M & L for provision of valve chamber of size 450x450x650mm (internal dimensions) without disturbing the existing pipe lines, valves including necessary earth work in any type of soil, PCC 1:1.5:3 in base concrete, PCC SBM work in cement mortar (1:6) with 10mm thick plaster internally and 15mm thick externally in cement mortar (1:4), 6mm thick MS sheet cover with hinges and locking arrangements fixed to angle iron frame made out of 50x50x6mm complete with 2 coats of synthetic enamel paint over a coat of red oxide primer on all steel work and 2 coats of white washing on plastered surface of valve chamber complete all as specified and as directed.

S&F bracket for street light fitting, 3 mtr long (1.5m along the wall and 1.5m at an angle of 45degree) made out of galvanized iron pipe of 40 mm dia light grade complete with and incl 2 nos MS clamp made of MS flat iron 40 x 6 mm size with nut, bolts, washer etc with and incl two coats of aluminum paint over a coat of red oxide primer, complete all as directed.

Supply and fix Concertina coil punched type 600mm dia., central core wire made from high tensile spring steel - high carbon wire conforming to IS 4454/ Part-/ Grade-Sm duly hot dipped galvanized, with diameter starting from 2.5 mm, UTS 1670 N/sq.mm, heavy zinc coating with minimum 230 gms per sqm. heavy duty J clips to be used for making concertina coils which is made from steel Fe 410 complete all as specified and directed. Notes :- (i) Weight of each coil shall be 8.80 Kgs (ii) Length covered after expansion of coil shall be 5.50 Rm

Supply, installation, commissioning and testing of factory made, CPRI approved LT feeder pillar box of size 1.2m x 1.2m x 0.6m, outdoor type made out of CRCA sheet 3.15 mm thick, factory fabricated with front and back openable double door with locking arrangement, with MS angle section 50x50x6 mm support, duly powder coated provided suitable gasket to make it dust and vermin proof, suitable for 3 Phase 4 wire, 415 Volts, 50 Hz, AC supply system, grouting the legs of panel in PCC foundation 1:4:8, platform 60 cm above the ground level and 45 cm below the ground level complete as all directed suitable for and including the following :-

(a) Aluminium bus bar, 3 Phase, 4 wire, AC Supply system 50 Hz mounted on epoxy based Post insulators, including drilling hole for cable connection, rating of bus bar 100 Amps. (b) MCCB 63 Amps, 415 Volt, 25 KA, 4 Pole, thermal magnetic release - 01 No. for incoming. (c) MCCB 32 Amps, 415 Volt, 16 KA, 4 Pole, thermal magnetic release - 02 Nos. (one OG for Guard room & one spare ) for outgoing (d) MCB SPN 32 Amps, 240 Volt, - 03 Nos (01 for street light and 02 for sentry posts) for outgoing.

Note :- The Schedule of credit has been attached in tender in PDF format and amount of credit shall be deducted from the total amount of BOQ to arrive at the Lump sum amount.

PADMA ENTERPRISES

M/S SUHEEL CONSTRUCTIONS