Const. of 3rd Addl. 12.5 MVA 132/11 KV T/F Plinth and Allied Civil Works at 132 KV S/S Sosan.

Amount

Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc.

Centring and shuttering for columns (Square or rectangular or poly gonal in plain)

Cement Concrete 1:6:12 with stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type.

Cement Concrete 1:5:10 with stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type.

Cement Concrete 1:2:4 with stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type.

Reinforced cement concrete M20 mechanically batch mixed using batch type concrete mixer as per IS 1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth

Reinforced cement concrete M20 mechanically batch mixed using batch type concrete mixer as per IS 1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure

Extra for using needle vibrator where not included in the rates .

First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.

115mm thick brick wall in cement sand mortar 1:4 without reinforcement in foundations and plinth

Conglomerate floor 25mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

Conglomerate floor 50mm thick cement concrete topping 1:2:4.

12.5 mm thick cement plaster 1:3

12.5 mm thick cement plaster 1:5

20mm thick C. Plaster 1:4 in two coats

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position R S Joists

Mild steel requirement for RCC work where not including the complete rate of RCC including bending, binding and placing in position complete in all respects. Above 20mm dia bars ( Labour Rates)

Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete ( Labour Rates)

Brick on end edging Providing and laying of Brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per Punjab PWD specifications.

Boring for Hand Pump in clay fitting stainer and pipe above 75mm dia bore but not exceeding 100mm: Exceeding 30m

Providing and fixing in position gratings 150mm x 150mm for gully trap. H.C.I. grating including painting with black bitumastic superior paint of approved manufacture three coats.

P & F of MS Tappered washers/Cleats 65X65X6 mm-19mm for T/F plinth.

P & F MS Base Plate 235x220x12 for T/F plinth

P & F MS 12.5X300mm Anchor Bolts

P&F of Angle Iron Nosing made out of 50x50x6mm Angle Iron for T/F Plinth

Cable Racks of various Sizes

P&F of MS Angle Nosing made out of 50x50x3 mm angle iron for cable trenches

Supplying hoisting of Ferro cement trench cover frame of size given below made of MS flat 50X3mm with 6mm dia bars with 9/2" and 9"C/C welded to flat with lifting hooks as per drg. no C/W DS-2537 R5 and CW/DS 2420 R3 complete Trench Cover T-4 Type (2’-6” x 1’-9”)

Supplying hoisting of Ferro cement trench cover frame of size given below made of MS flat 50X3mm with 6mm dia bars with 9/2" and 9"C/C welded to flat with lifting hooks as per drg. no C/W DS-2537 R5 and CW/DS 2420 R3 complete Trench Cover T-3 Type (2’-2” x 2’-2”)

Supply , Hoisting & plaicng of ferro cement trench covers,frames of size given below made of MS Flat 50x3 mm with 6mm dia bars at 4.5 "and 9"welded to flat with lifting hook as per Drg No CW/DS2537 R5 and CS/DS2420 R3 Complete - P - type (3'-4"x1"-6")

Cement Slurry of cement to sand ratio 1:6 with cement content not less than 150kg/100 sqm

S & laying of gravel

Laying PCC Flooring

P&F Template

Extra Carriage of materials & diff. of rates of material- Cement

Extra Carriage of materials & diff. of rates of material- Steel

Extra Carriage of materials & diff. of rates of material- Crushed bajri 13.2mm

Extra Carriage of materials & diff. of rates of material- Fine sand

Extra Carriage of materials & diff. of rates of material- Bricks

Extra Carriage of materials & diff. of rates of material- Crushed bajri 11.2mm

Extra Carriage of materials & diff. of rates of material- Coarse Sand

Extra Carriage of materials & diff. of rates of material- Stone metal 40mm

INDO ENGINEERING WORKS

PAUL AND COMPANY