ADDITION/ALTERATION AND SPECIAL REPAIR TO P-6 BLDG (WELDING SHOP) AT TIMBER POND BOAT BASIN INSIDE CHENNAI PORT TRUST UNDER GE(I) CG CHENNAI

Amount

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including removal of debris off the premises and serviceable items taken as credit complete all as specified and as directed. all as specified and as directed.

Material and labour for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Make:Tata Blue Scope/Jindal/Llyod

Material and labour for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Make:Tata Blue Scope/Jindal/Llyod

Supply and fix Rolled Mild steelsections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates confirming to Fe-410-W(Gde-E-250) quality B complete all as specified and as directed.

Supply and fix 2 mm thick fibre glass reinforced translucent corrugated polycorbonate sheet coloured with two corrugated side lap fixed to roof as per manufacturers instructions and fixed with L-type or J -type or cranked hook bolts complete all as specified and directed.

Demolition of plain cement concrete in groud floors and pavings not exceeding 15 cm thickness (below or above ground level) including removal of debris off the premises to a distance not exceeding 100 metres complete all as specified and as directed.

Material and labour for plain cement concrete 1:2:4 type B1 (using 20 mm graded aggregate) ,40mm thick as in floor AND finshing with broom or MS jali including necessary form work complete all as specified and as directed.

Material and labour for screed bed in cement mortar 1:6 , 20 mm thick for receving of floor tiles complete all as specified and as directed.

Material and labour for industrial coloured tiles , 10 to12 mm thick (Heavy Duty) (square/rectangular) area of each tiles exc. 0.08 sqm but not exc 0.16 sqm in floors etc.set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface in complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key, scrubbing down with water etc and removing rubbish off the premises, removal and depositing servicable materials where directed complete all as specified and as directed

Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quoins,arches, pillars etc and precast concrete articles portions ordered to be dismanted including removal of debris outside MD land complete all as specified and as directed.

Material and labour for Brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for Rendering in CM 1:6, ,15 mm thick on fair faces of brick work surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Rendering in CM 1:4, ,10 mm thick on other than fair faces of brick work surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Non skid ceramic coloured tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.18 sqm but not exc. 0.38 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:6 , 15 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Non skid ceramic coloured tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.18 sqm but not exc. 0.38 sqm in vertical sufaces etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:3 , 10 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Non skid ceramic coloured tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.06 sqm but not exc. 0.11 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 15 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Glazed coloured tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile not exc. 0.18 sqm in verticals etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:3 ,10 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Taking down chowkhats or frames with shutter not exceeding 1.5 sqm each (without taking off shutters from the frame) including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Taking down chowkhats or frames with shutter exceeding 1.5 sqm but not exceeding 4 sqm each (without taking off shutters from the frame) including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Taking down shutters of any description exceeding 1.0 sqm but not exceeding 2.0 sqm each and taken as credit complete all as specified and as directed.

Supply and fix powder coated aluminium frame for doors, windows, ventilators with one or more rebate including joining cleats, glazing clips rubber packing powder coating alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of powder coating 50 microns.

Supply and fix powder coated aluminium door shutters, aluminium section weighing 0.55 kg/RM including joining cleats, glazing clips rubber neoprene packing , handle 02 Nos in each door and hinges , powder coating alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of anodisation 15 microns.

Supply and fix powder coated aluminium window and ventilator shutters ,sliding type without sash bar , aluminium section weighing 0.55 kg/RM including joining cleats, glazing clips rubber neoprene packing , powder coating alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of anodisation 50 microns.

Supply and fix Powder coating aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum powder coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved powder coating aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

Supply and fix Plain sheet glass pane 4.80 mm thick ordinary quality and glazing with neoprene rubber breading in squares exc 0.5 sqm in each pane complete all as specified and as directed.

Material and labour for 1 mm thick Wall Care Putty including cleaning the wall surface with the help of sand paper, putty blade or wire brush and then apply 1st putty coat on moistened surface and after surface dried , rub gently with wet sponge, then allow the surface dry for 3 hours and similarly apply second coat and leave for 10-12 hours and finally rub with very fine emery paper to obtain glossy surface complete all as specified and as directed. Note:Make of wall putty :Jk White cement/Birla Wall care putty

Material and labour for Preparation of newly plastered surfaces of wall including pilasters and cornice etc and Distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and as directed.

Material and labour for Preparation of newly plastered surface of wall including pilasters and cornice etc and apply two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over surfaces complete all as specified and as directed.

Supply anfd fix Vitreous china wash down water closet pan (pedestal pattern ),white inclduing fixing bolts but excluding flushing cistern and including flush pipe with nd provision of plastic water closet seat, white, closed pattern with flat bottom, & cover & mild steel chromium plated or aluminium hinging devices with including 'P' or 'S' trap complete all as specified and as directed . (Cat no 20044 of hindware or equivalent)

Supply and fix PVC low level flushing cistern white 10 litres capacity syphonic action type with complete accessories including 32 mm dia CP flush pipe etc., fixed with inlet ball valve,float ,handle and necessary mild steel brackets and connecting to pipes and fixing of chain and pully or lever if any complete all as specified and as directed. . Note:Make :M/S Parryware cat part no : C8090

Supply and fix vitreous china wash basin, white flat back size 630 mmx450 mm mm with gratings and union for discharge pipe (back or corner wall type ) complete including providing and fixing plugs,bedding urinal against wall in cement mortar securing urinal plugs with and including 60 mm long brass screws pointing around urinal back in white cement and provision of LDPE waste pipe of 32 mm dia ,1 .50 metre long complete all as specified and as directed.

Supply and fix 1000 litres capacity rotational moulded polyethylene water storage tank double layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I ,ISI Marked including dismantling of old tank and taken as credit complete all as specified and as directed.

Supply and fix in 20 mm bore dia Ball brass valves, high pressure, with polyethene float & fly-nut complete, screwed for GI pipe or brass ferrule complete all as specified and as specified.

Supply and fix 20 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directed

Supply and fix 25 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directed

Supply and fix chromium plated fancy type 15mm dia bore Bib tap ,cast copper alloy with long body screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed. Make: Prayag/ Cera/Hindware

Supply and fix Fancy type chromium plated pillar tap, 15mm dia bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make: Prayag/ Cera/Hindware

Supply and fix Fancy type chromium plated stop cock/angle cock 15mm dia bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed .Make: Prayag/ Cera/Hindware.

Supply and fix Fancy type chromium plated concelead stop cock, 15mm dia bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make: Prayag/ Cera/Hindware.

Supply and fix in repair waste fiiting 32mm bore brass chromium plated for glazed ware sink or basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed with 32mm bore PVC Low density polyethylene waste pipe complete all specified and as directed.

Supply and fix in repairs PVC flexible connection 15mm size with PTMT nuts of length 375 mm long complete all as specified and as directed. Make:Prayag/Shakthi Industries

Material and labour for Cutting holes into or through brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete of superficial area exc 150 sq cm but not exc 400 sq cm and making good the surface to match with the existing area complete all as specified and as directed.

Supply and fix Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube as per specification & drawing complete all as specified and as directed.

Supply and fix Factory made solid panel PVC door shutter 30mm thick (style) with PVC Foam profile ,homogeneous fine cellular structure having smooth outer integral skin consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC (C) channel and a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail Panelling to plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site as per specification and drawing complete all as specified and as directed

Supply and fix Rolled Mild Steel door with framed work or gates of angle or other section with gusset plates, rails, braces, roller (pulley) with necessary items etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for handing or sliding with and including either hooks and hinges or steel hanging door fittings (inclusive of steel / galvalume sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirming to Fe-410-W(Gde-E-250) quality B complete all as specified and as directed.

Supply and fix Flush shutters 19 mm thick, factory made solid core construction, with particle board core & plywood face panels, commercial type on both sides complete all as specified and as directed.

Material and labour for Preparation of new painted surfaces of steel or iron surface materials of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for Preparation of old painted surfaces of steel or iron surface materials of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for Preparation of old plastered wall surfaces including pilasters and cornices and applying one coat of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for Preparation of old plastered surface of wall including pilasters and cornice etc and apply two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over surfaces complete all as specified and as directed.

Demolition and breaking up drain pipes, 150 mm dia (PVC, salt glazed stone ware, AC or reinforced concrete) set in cement mortar including removal of debris off the premises not exceeding 100 meter complete all as specified and as directed.

Material and labour for Salt glazed stoneware (SGSW) grade 'A' drain pipes 150mm bore laid in trenches and jointed in cement mortar 1:1 on Concrete bed complete including testing etc and concrete bed to drain pipes of bore 150mm including packing under and haunching against the sides of pipes after they are laid and treated in cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate and testing complete all as specified and as directed. Note:-(i)Excavation and earth work shall be measured and paid separately under relevent items . .(ii) Make of SGSW pipe:M/S TSL

Excavating in trenches not exceeding 1.5 M wide and not exc 1.5 metre deep and getting out in soft/loose soil complete all as specified and as directed

Returning, filling in soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specifed and as directed.

Removing excavated material exceeding 500 meter and not exceeding 1.50 KM depositing where directed at a level not exceeding 1.5m above the starting point complete all as specifed and as directed.

Dismantling of rain water pipe and sewage line pipes of any type and size including all fittings and removal of debris off the premises not exceeding 100 metres complete all as specified and as directed.

Supply and fix 110mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors /fixed to walls with clamps complete all as specified and as directed.Make:Finolex/Trubore/Supreme

Supply and fix 75mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors / fixed to walls with clamps complete all as specified and as directed.Make:Finolex/Trubore/Supreme

Supply and fix PVC (SWR) bend ,any radius ,110 mm bore fitted with oval access door complete all as specified and as directed..Make:Finolex/Trubore/Supreme

Supply and fix PVC (SWR) bend ,any radius ,110 mm bore complete all as specified and as directed..Make:Finolex/Trubore/Supreme

Supply and fix PVC (SWR) bend ,any radius ,75 mm bore fitted with oval access door complete all as specified and as directed..Make:Finolex/Trubore/Supreme

Supply and fix PVC (SWR) reducers ,any radius ,110 mm bore complete all as specified and as directed..Make:Finolex/Trubore/Supreme

Supply and fix 110 mm bore PVC(SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and as directed..Make:Finolex/Trubore/Supreme

Supply and fix PVC(SWR)vent cowl 75 mm dia .Make:Finolex/Trubore/Supreme

Dismantling structural steel work includingdoors, gates etc. and removal of waste material off the site and steel scrap taken as credit complete all as specified and as directed.

Taking down carefully point wiring with copper/aluminium conductor (light,fan, socket or power complete ) and fittings such as switches,ceiling roses,pendents,regulators,sockets,light fittings,calling bell etc and removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.

Taking down carefully submain wiring with aluminum conductor cable 4/6/2.5/1.5 Sqmm in PVC conduit complete including making good the disturbed surface of wall / floor etcand removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.

Taking down carefully unserivce able TPN/SPN DB with MCBcomplete including making good the disturbed surface of wall / floor etcand removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor FRLS PVC insulated cable 1100 volts grade single core drawn into and including non mteallic rigid PVC conduit of size 25 mm dia concealed in wall/floor etc along with 1.5 sqmm unsheathed multi stranded copper conductor FRLS cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling/ roof with and including PVC recangular board of adequate size for mountling switches, socket, fan regulators etc complete for the following points complete all as specified and as directed. Note: (i)Make of PVC cable : Finolex/ Polycab/Plaza.(ii) Make of PVC Conduit :Avon Plast/Presto Plast/Finolex

One light point controlled by one switch

One fan point controlled by one switch

Material and labour for Sub main wiring with four runs single core 16 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 16 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn in PVC Casing caping in surface/recessed as required etc complete all as specified and as directed. Note:. (i)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL (ii) Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (iii) Five different colour cable shall be used for phase, neutral and earth (iv) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles.

Material and labour for Sub main wiring with four runs single core 10 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 10 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn in PVC Casing caping in surface/recessed as required etc complete all as specified and as directed. Note:. (i)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL (ii) Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (iii) Five different colour cable shall be used for phase, neutral and earth (iv) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles.

Material and labour for Sub main wiring with two runs single core 4 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 4 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn in PVC Casing caping in surface/recessed as required etc complete all as specified and as directed. Note:. (i)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL (ii) Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (iii) Three different colour cable shall be used for phase, neutral and earth (iv) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles.

Material and labour for Sub main wiring with two runs single core 2.5 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 2.5 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn in PVC Casing caping in surface/recessed as required etc complete all as specified and as directed. Note:. (i)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL (ii) Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (iii) Three different colour cable shall be used for phase, neutral and earth (iv) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles. (v) To be measured for 15 Amp socket and DB to main switch box

Material and labour for Sub main wiring with two runs single core 1.5 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 1.5 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn in PVC Casing caping in surface/recessed as required etc complete all as specified and as directed. Note:. (i)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL (ii) Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (iii) Three different colour cable shall be used for phase, neutral and earth (iv) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles. (v) To be measured for 5 Amp socket and DB to main switch box

Supply and fix repair Switch piano flush type single pole one way 5 Amp complete all as specified and as directed.

Supply and fix Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal complete all as specified and as directed.

Supply and fix Switch socket combination 2 in 1, 3 pin, 5 to 15 Amp flush type universal complete all as specified and as directed.

Supply and fix Ceiling rose, surface type, PVC of 25 x 50mm, two to three terminals AC 230 V complete all as specified and as directed.

Supply and fix sheet metal enclosure for Board distribution double door with 200 Amps double door rated bus bar TPN 4 way complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and fix MCCB 100 Amps, 415 Volts, Rupturing capacity 36KA all as specified and directed complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and fix MCB TP 63 Amps, 415 Volts, Rupturing capacity 16Ka all as specified and directed complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and fixsheet metal enclosure for Board distribution double door with 200 Amps rated bus bar SPN 4 way Make:- C&S/HPL/Legrand

Supply and fix sheet metal enclosure for Board distribution double door with 200 Amps rated bus bar SPN 8 way Make:- C&S/HPL/Legrand

Supply and fix sheet metal enclosure for Board distribution double door with 200 Amps rated bus bar SPN 12 way Make:- C&S/HPL/Legrand

Supply and fix MCB SPN 5 to 30 Amps, Repturing capacity 10KA complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and fix MCB SP 5 to 16 Amps, Repturing capacity 10Ka complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and fixing sheet metal enclosure with socket plug top and MCBs complete single pole and netural enclosure with 3-pin and earth plug and socket complete with single pole MCB 30 Amp capacity including fixing in walls dully embedded complete all as complete directed.

Supply and fix LED Flood light fitting with high luminous efficacy IP 65 Protected with front toughened glass of capacity 48 or more nearer watts ,6500 K including all accessories and wiring including dismantling of old unserviceable fitting complete all as specified and as directed. Make : Wipro code no : D913065 or equivalent price ,specification and cat part no in Philips

Supply and Fix Recess mounted 2' x 2' LED flat panel 34W ,4000k high efficiency with high brightness LED for glare free homogenous illumination mounted square slim and elegant downlight/panel for indoor application with high aesthetic appeal,available in various wattage for soothing light suitable for grid ceiling with super bright LED model complete with all accessories internally pre wired and connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old one and taken as credit complete all as specified and as directed. Havells Cat part No VENUSNEOHE2X2PLR18-42WLED865MOD or equivalent in Philips/Cromtpon/surya/Bajaj

Supply and fix LED light fitting 4 feet white, 20W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. complete all as specified and as directed. Make:- Philps Cat Part No. BN021C LED20 S PSU CW GR S2 In case the make mentioned above is not available in market then equivalent price and specification in M/S Wipro /M/S Bajaj /Havells/Crompton.

Supply and fix LED light fitting 2 feet white, 10W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. complete all as specified and as directed. Make:- Philps Cat Part No. BN 021 LED10S- 6500 PSU GR S1 In case the make mentioned above is not available in market then equivalent price and specification in M/S Wipro /M/S Bajaj/M/S Wipro /M/S Bajaj /Havells/Crompton.

Material and labour for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick, burried directly in ground (earth pit not less than2.25 Metre, deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to galvanized iron strip 32 x 6mm by means of bolts, nuts washers checknuts of galvanized or steel all as shown in electrical plate No 3 of SSR Part I connected to earthing test points all as specified or indicated including 25 Kgs of Bentonite powder and excavation and earth work, PCC 1:2:4 type 1 in chamber, RCC cover 50mm thick in 1:2:4, type B1 (20mm graded aggregate) with 8mm MS rod at 15cm in both ways hook, funnels with 50mm dia protection pipe and 20mm dia medium grade watering pipe, wiremesh and GI lugs, GI protection pipe and testing on completion complete all as specified and as directed

Material and labour for Earth continuity conductor or main earthling lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop eatthing etc as required 20x3mm copper strip complete all as specified and as directed

Supply and fix 5 Star rating ceiling fan 1200mm sweep Min air delivery 210 CFM with service value of 6.0 BEE five star rated with brush less direct current motor (BLDC).” suitable to work on single phase AC 230 Volts 50 Hz complete including connecting electrically to ceiling rose or connector block using PVC insulated sheathed 3 core cable 0.75sqmm flexible copper conductor and including taking down old fans and removal to store complete all as specified and as directed. Make : Anchor/Havells/Crompton

Supply and fix heavy duty exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver including taking down old fans and removal to store all as specified and directed. Make : Havells/Crompton/Almonard

Supply and Fix wall industrial mounted fan (heavy duty) complete with accessories ,230 V ,450 mm sweep including pre wired with PVC flexible copper cable of required length including taking down old fans and removal to store complete all as specified and as directed. Note Make of wall mounted fan :Orient/Bajaj/Almonard

Supply and fix turboventilators of throat dia 24" (610 mm) at roof top made out of high grade aluminium blades & zinc coated stainless steel top cover with UV treated, epoxy coated, FRP base plate with no. pf blades not less than 40. Dimension of blade W=1.5m, L=1.6 and T=0.8 to 2 mm. Twin sealed bearings with self lubricating resin or bearing free technology to ensure frictionless rotation even at lowest wind velocity. Centre shaft made out of high carbon steel zinc plated. Ineer and outer arms made out of high carbon steel with zinc plated including civil works ,transportation cost , loading and unloading charges and other miscillaneous charges complete all as specified and as directed. Note:Provision of turboventilator shall be executed through authorised manufacturer as approved by GE.

Supply, lay and test LT UG cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 150 sq mm complete all as specified and as directed. (Note : Make of cable : Gloster/Polycab/CCI). Note:Earth work and excavation ,sand filling , cable protection etc shall be measured and paid seperatel

Supply Fabricate, install, connect, test and commission Kiosk Outdoor type weather , dust , water & Vermin proof Feeder Pillar Box LT 440 Volts ,50 Hz , 3 Phase , 4 wire supply, Floor mounted , Factory Fabricated totally enclosed with front and rear opening hinged doors with plain top projected Manufactured by CPRI Approved Manufacturer made out of 3.15 mm thick CRCA Sheet including suitable MS angle iron/ flat iron frame work/ supports bottom 50x50x6 mm of size 1.00x0.80x0.40 meter suitable for 03 Nos of feeders ( Total incoming and outgoing ) ,any capacity , handle type locking arrsngements ,Powder coated internally and externally with MS channel base of appropriate size and mounted on PCC foundation of size as required or approved by manufacturers in PCC 1;3;6 Type C-2 using 40 mm graded crushed stone aggregate including earth work and excavation complete with bus bar chamber comprising of 4 Nos of copper strip bus bars PVC insulated made up of copper strip of size 40x 10 mm Pvc sheathed with colour coding ,CTs of ratio 630/5 Amps having accuracy class 1 ,Prewired with suitable size PVC insulated copper conductor cables for control wiring for multi functional LT metre and PVC insulated copper strip of size appropriate but not less than 25x5 mm for power circuits for incoming and outgoing feeders etc as per standard Engineering practice and required at site site complete with danger notice complete all as specified and as directed. Note : Make of feeder pillar box : L&T,Advan

Supply and fix Vertical DB TPN 8 way including one no of 200 Amps TP , 36 KA as incomer complete in Stainless steel enclosure with vertical double door type complete all as specified and as directed. Make :Legrand / Siemen/L&T

Supply and fix MCCB 4 Pole 415 Volts of capacity 25 Amps to 100 Amps with enclosure on panel mounted type with breaking capacity 16 KA Magnetic thermal setting adjustable 70-100 % including disconnecting the incoming/outgoing cable connections and reconnecting with suitable aluminium lugs.ferrules etc complete all as specified and as directed. Make :Legrand / Siemen/L&T

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation for laying of cables/ foundation of post holes etc and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cms thick in excavated soil complete all as specified and as directed

Removing excavated soil n exc 50 m and depositing where directed at a level n exc.1.5 m above the starting point complete all as specified and as directed.

Supply and spread clean M sand in trenches including levelling, punning for cushioning of cables complete all as specified and as directed. Note : Punned thickness of sand cushioning only shall be measured and paid.

Supply and lay Fly Ash bricks of size 230 mm x115 mm x75 mm ,75 kg/sqcm in layers perpendicular to the axis of UG cable for protection of cable complete all as specified and as directed.

Material and labour for Plain cement concrete 1:3:6 using 20 mm graded stone aggregate for foundation/coping of poles including necessary form work and finishing the exposed concrete surfaces even and fair including demolition of existing PCC Foundation and removal of debris off the site complete all as specified and as directed.

Material and labour for GI Tubing 80 mm bore medium grade with all fittings laid in crossing road/ complete and or fixed in wall /pole up to junction box including necessary clamping etc complete all as specified and as directed.Note : Cutting of road item shall be measured and paid seperately. Make of GI Pipe : Tata/Jindal/Prakash Surya

Supply and fixing of MCCB 4 pole, 415 volts of capacity 400Amps with enclosure on panel mounted type with breaking capacity 36 KA magnetic thermal setting adjustable 70-100% including disconnecting the incoming / outgoing cable connections and re-connecting with suitable aluminum lugs / ferrules etc., after taking out the existing unserviceable MCCB and making good the disturbed surface for complete all as specified and as directed. Make:Siemen/ABB/Scheneider

VIJAYALAKSHMI ENTERPRISES