ALL INCLUSIVE MAINT OF PRAKARNTHI LINE AND NEAR BY OTM ACCN IN VARANASI CANTT UNDER GE (EAST) PRAYAGRAJ.

Amount

Dismantling brick/ cocrete tiles any size incl demolition of mud fuska in roofs any thickness and in any position and leaping over roof terrace emoving the demolished material to a distance exc 250 m & n exc 500 m and depositing where directed at a level n exc. 1.5 m above starting point, etc incl existing roof treatment of any thickness, complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-0, using 12.5 mm graded crushed stone aggregate for roof padding, , coping , roof kerb mixed with and including SBR polymer as per manufacturer's instructions all around periphery of the wall, complete all as specified and directed.

M&L for 15mm thick in CM 1:4 rendering on fair faces of concrete surfaces /roof top mixed with liquid water proofing admixture finished even and smooth without using extra cement, complete all as specified and directed. Note :- Liquid WPC shall be measured and paid separately

M&L for preparation of newly plastered surfaces of roof including cleaning the surfaces by using wire brush/ pressure hose and applying high performance polyurethene liquid membrane waterproofing coating in two coats @ 1.5 Kg/Sqm/ 2 coats with spray/ brush applied, with an elongation of 300% to 700% and tensile strength of not less than 3 N/Sqmm as per ASTM D412 and ASTM D2370, crack bridging ability of 3.5mm as per ASTM C1305, shore a hardness of not less than 60 as per ASTM D2240. The item includes applying epoxy primer @ 0.15Kg/Sqm and a geotextile of 40 GSM to be applied over first coat while first coat is still wet, complete as per manufacturer's instructions, complete all as specified and directed. Note:- (i) The contractor shall submit a guarantee of 10 years the date of completion of work for waterproofing treatment alongwith manufacturer's guarantee. The amount of Rs. 40 (Rupees Forty) per Sqm and min of Rs. 4000/- for waterproofing treatment shall be withheld from contractor's in the final bill till the expiry of guarantee period. The contractor at his own option may furnish fixed deposit receipt pledged in favour of GE against guarantee money. (ii). The water proofing shall be carried out by authorized applicator of manufacturer. The name of applicator shall be got approved from GE before commencement of work. (iii) Materials shall be procured from manufacturer/authorized dealer only and original purchase voucher for the full quantity of material shall be procured by the contractor.

M&L for Treatment to sunken floor and sides as mentioned here after:- (i) Cleaning the sunken floor surfaces with demolition and removing existing pcc ,lime conc ,muddy soil etc including taking down existing treatment to sides and base slab by using sand blasting with compressed air. (ii) M&L application of a coat to sides and base of sunken with glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal -107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika Fab-I and top coat with Sika Seal-107@ 1.50 Kg/Sqm or equivalent of Forsoc or pidilite. (iii) M&L for 15 mm thick cement plaster on side and base slab of sunken part in cement mortar 1:3 mixed with appropriate integral water proofing compound with Sika Plastocree plus as specified. (iv) M&L for applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 Kg/Sqm on plastered surface of sunken sides & base. Note:- All debris obtained from site will be thrown away out side Def Land by contractor at his own expense. (v) S&F 25 mm bore GI tube medium grade pipe spout from inside up to min 150 mm beyond outer face of the wall.

M&L for Cement concrete 1:5:10 type E2 using 40mm graded crushed stone aggregate as in sunken part of slab, complete all as specified and directed.

M&L for 25 mm thick cement concrete 1:2:4 as in levelling course of type B-0 (using 12.5mm graded crushed stone aggregate) finished even & fair to receive floor finishes, complete all as specified and directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with & including 15 mm thick screed bedding in cement mortar (1:4) complete all as specified and as directed.

M&L for Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10mm thick plaster in cement mortar (1:4) complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc, complete all as specified and directed.

S&F 110mm PVC (SWR) bends with access door, complete all as specified and directed.

S&F 75mm PVC (SWR) bends any radius with acess door, complete all as specified and directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with acess door, complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with acess door, complete all as specified and directed.

S&F 110mm PVC (SWR) vent cowl, complete all as specified and directed.

S&F in repair 75mm PVC floor trap plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F in repair 150 mm X 100 mm Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' and setting and jointing in cement mortar 1:1, complete all as specified and directed.

S&F in repair Stack clamps made out of 50mm x 5mm flat iron and 16mm dia round iron stays for 110mm pipe including fixing arrangement, complete all as specified and directed.

All as per item No. 23 above but 75mm, complete all as specified and directed.

M&L for cutting chases pinning in , making good to facing where reqd. and pointing in CM 1:3 to ends or edges of landing , steps, cills, sunshades,selfs lintels etc. and cutting chases for concealed for water tubing or conceled condute wiring etc and making good, cutting n.exc 10cm girth.complete all as specified & as directed

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 15mm bore pipe complete all as specified and directed.

S&F PP-R pipe of size 20mm OD bore with 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply includingall PP-R plain & brass threaded polypropylenerandom fittings fixed complete towalls, ceilings or in floors etc., complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20mm bore pipe, complete all as specified and directed.

S&F PP-R pipe of size 25mm OD bore with 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply includingall PP-R plain & brass threaded polypropylenerandom fittings fixed complete towalls, ceilings or in floors etc., complete all as specified and directed.

S&F Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15 mm bore fixed in repair, complete all as specified and directed.

S&F in repair stop valves,/angle valves (for 15 mm bore pipe ) fancy type, chromium plated cast copper alloy,screwed down, high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pedestal pan white, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythylene of low or high density or PVC 32mm dia, Plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.

S&F PVC unbreakable (square) wall mounted shelf with 500 mm sides, fixed in repairs, complete all as specified and directed Make:- Prayag Cat No. BEA- 47A or any other technocommercially equivalent make as approved by GE

S&F in repair Sinks with drainage board made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F Vitreous China wash hand basin, with pedestal white flat back of size 580 mm x 400mm fixed on and fixing of cantilever brackets of mild steel angle 35 mm x 35 mm x 5 mm, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe (rigid quality) including fixing of tap, Mixture, waste fitting, complete all as specified and directed. Note :- Mixture tap shall be measured & paid seperately as supply only under respective item.

Supply only 15 mm bore central hole basin mixer with 450mm braided connection pipe (without popup), complete all as specified and directed

S&F chromium plated brass shower rose, 125mm dia, with shower arm ,swivel joints fixing to steel pipe or union of 15 mm dia pipe, fixed in repair, complete all as specified and directed.

S&F stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions, 15mm bore, fixed in repair, complete all as specified and directed.

S&F 500 litres capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete and including dismantling of old tank complete all as specified and directed.

S&F in repair PPR Gate valve (Brass Insert) for Pipe Dia 25mm OD as per Site Requirement all as specified and Directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed. complete.

S&F in repairs PVC flexible waste pipe 32 mm dia and over for fixing in urinals and wash basin ,kitchen sink, complete all as specified and directed.

S&F 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fittings, fixed complete to walls, ceilings or in floors etc., complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack of size 900x 1200 x250 deep, fabricated with 0.63 mm thick stainless steel sheet fixed in position on wall, complete all as specified and directed.

S&F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets fixed to wall complete all as specified and directed

S&F in repair SS soap dish complete all as specified and directed. Make Cera Cat Part No. F5007106 or equivalent in makes, as specified in list of make.

S&F in repair 25 mm dia stainless steel curtain rod of 304 grade and thickness 1.25 mm for door & windows incl one pair of SS Bracket and steel cover for each rod cut to size and fixed in position, complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area not exc 1.5 Sqm each, complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n exc 4.00 Sqm each, complete all as specified and directed.

Dismantling boarding any desccription fixed in any position with nails or any other means, complete all as specified and directed

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length, complete all as specified and directed. Note : (i) The WPC shall comprising of virgin PVC polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms). (ii) The frame shall fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws. (iii) The WPC shall have minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant. (iv) The cost of M.S. hold fast/ lugs or SS dash fasteners shall deemed included in quoted unit rate. Each frame shall be fixed with min 06x holdfasts/ faster's.

S&F providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of requiredsize with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directedby Engineer In- Charge. Note:- stainless steel butt hinges shall be paid separately.

S&F 125x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and fixed

S&F 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and fixed

M&L for PCC (1:2:4) type B-1, using 20mm graded crushed stone aggregate as in bed block and filling in door frames complete all as specified as directed

S&F 30 mm Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size withnecessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engineer-In-Charge. Note:- Stainless steel butt hinges and necessary SS screws shall be paid separately.

S&F 30mm thick plain WPC factory made glazed Skeleton door shutters (conforming as per IS-4020) with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door to be panelled with SS mosquito mesh and XTN aluminium mesh for additional strength and safety purpose. Door should be fixed with SS hinges and SS screws. Door should be water prrof, termite proof, fire retardant and having screw holding capacity complete all as per manufacturers specification & drawings & as directed by Engineer-in-charge. Note:- Stainless steel wire mesh shall be measured and paid separately.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one pink primer, complete all as specified and directed.

S&F 150mm SS handles, complete all as specified and directed

S&F 200mm SS barrel tower bolts fixed, complete all as specified and directed.

S&F 250mm SS sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet fixed, complete all as specified and directed.

S&F 100 mm long SS butt hinges, complete all as specified and directed

S&F 300mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

S&F 140mm Floor door stopper of brss body and tongue, with hard drawn steel spring complete all as specified and directed.

S&F providing and fixing 18mm thick factory made single extruded WPC (Wood Polymer Composite) solid board one side white colour and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powcler/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being Termite/borer proof, water/moisture proof and Fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engineer-In- Charge. Note: stainless steel hinges shall be paid separately.

S&F providing and fixing 12 mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain white colour board for backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. complete all as specified and directed by Engineer-In-Charge.

S&F continuous (piano) hinges, Stainless steel of width 30 mm complete all as specified and directed.

S&F Powder Coated aluminium frame for doors, windows, ventilators powder coated (thickness of powder coating not less than 50 micron) with one or more rebates including jointing cleat for fixing etc complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer -in -Charge. Note:- (i) The rate is inclusive of all fixings of builders hardware such as hinges, bow handles, locking arrangements rubber beading for fixing of glass etc complete all as directed by Engr-in-Charge. (ii) Glass and wiremesh shall be measured and paid separetely

M&L for 4.8 mm thick sheet glass ordinary quality and glazing with aluminium beading n exc in each pane complete all as specidfied and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

M&L for MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

M&L for 4.8 mm thick frosted sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F magnetic catcher of size 20 mm X 50 mm suitable for cupboard shutter complete all as specified and directed

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, complete all as specified and directed.

M&L for 16-18 mm thick Granite slab work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in & including 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including rounded/half rounded edge and hole for gas pipe in pre-cast slab as well as stone slab in cooking platform, complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc, complete all as specified and directed.

Demolition of cement concrete reinforced as in chajja and similar suspended work, complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over in reinforcement cut to length bent to shape required incl cranking bending, spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in slab supported on wall and beams & shelves and similar works complete all as specified and directed

Formwork to sides and soffits of slabs n. exc. 200 mm thick and similar works rough finished surfaces of concrete, complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coat of oil bound distemper on walls with & incl 1 mm thick wall care putty, complete all as specified and directed.

M&L for rendering 10 mm thick on internal surface of brick work or concrete surfaces in cement mortar 1:6 and finishing the surface even and smooth without using extra cement incl taking down cement plaster complete all as specified and directed

Complete removal of existing treatment on wall/roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed.

M&L for 1mm thick wall care putty with one coat of acrylic water based exterior grade primer @0.9 ltrs (undiluted)/10sq mtrs diluted with water 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and directed. Make:- ASIAN/BERGER/NEROLAC or equivalent make as mentioned in list of make.

M&L for two coats of water based premium acrylic smooth exterior emulsion of approved colour with silicon addictive & colour stay technology excellent dirt pick up resistance with low VOC less than 50 gram/ltr as per the LEEDS specification anti algal properties in two coats @ 1.79 ltrs (undiluted)/10sq mtrs diluted with water as per manufacturer instruction applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 m. The spray machine should be of reputed paint manufacturer as mentioned in PS and accessories for applying emulsion should be able to spray in hard to reach areas and penetration of emulsion on the surface using auto roller for making the surface uniform complete all as specified and directed. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. Make :- ASIAN/BERGER/NEROLAC or equivalent make as mentioned in list of make. Note:- The contractor shall obtain approval of the agency from GE within 10 Day of the award ofthe contract and shall enter a memorandum of understanding (MOU) with the manufacturer duly approved by GE. The copy of MOU shall be submitted to the department by the contractor within 20 days of the award of the contract. The execution of work shall be commenced after the submission of MOU and necessary approval from the Engineer-in-charge. MOU shall be valid during currency of work. However during defect liability period, if any defect is noticed during this period, the contractor shall only be responsible for the rectification of same.

M&L for rendering 15 mm thick on fair faces of brick work in CM in 1:4 finished even and fair and mixing with water proofing liquid as per manufacturer instruction (but excluding the cost of water proofing liquid ) external surface, complete all as specified and directed.

Supply only Integral crystalline water proofing compound of approved make, complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling incl cornices and apply two coats of white wash complete all as specified and directed by Engineer -in-charge

Rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even incl taking down of plaster complete all as specified and directed.

M&L for preparing new plastered surfaces of ceiling and applying two coats of white wash, complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on old steel surfaces of any description over 10 cm width or girth treated including preparation of steel surfaces, complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) incl chequered tiling and Paver blocks, complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection, finishing cement concrete surface even and fair, complete all as specified and directed.

M&L for forming Contraction (Dummy)joints 65mm deep x 10mm wide,filled with sealing compound Grade A, complete all as specified and directed.

Excavation in trenches n.exc 1.5 mtr wide and n. exc 1.5 mtr depth for foundation, forshafts, wells,cesspits, manholes, Pierholes etc or n.exc 10 sqm on plan and n. exc 1.5 mtr in depth and getting out any type of soil, complete all as specified and directed.

Demolition and breaking up RCC/Salt glazed stoneware drain pipe set & jointed in cement mortar laid in trenches 150 mm bore of pipe, complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone agg as in surface channel or benching including finishing the top of benching or for kerb/gola and edging even and smooth using extra cement (Forming fair finished channel shall be measured separately), complete all as specified and directed.

Returning , filling in any type soil (any type) incl spreading levelling, watering and well ramming in layers not exceeding 25 Cm thick, complete all as specified and directed.

Removing surplus soil excavated material exc 250m but n.exc 500m where directed at a level not exceeding 1.5 Mtr above the starting point, complete all as specified and directed.

Cutting into existing manhole new drains for conecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round 3/4 section ) in cement concrete 1;2;3 type B1 smooth finished and reparing benching as required for 150 mm dai pipe, complete all as sepecified and directed

M&L plain cement concrete (1:3:6) type C2 using 40mm grade crushed stone aggregate in foundation of man hole etc, complete all as specified and directed.

M&L for concrete bed to drain pipes in PCC (1:3:6) type C 2 using 40mm graded stone aggregate including packing under and haunching against the sides of pipes after are laid in step and tested for 150/110 mm bore sewer line (excavation and earth work for sewer pipe line measured and paid separately, complete all as specified and directed.

Demolition of brick work built in CM, complete all as specified and directed.

M&L for brick work with Sub Class B bricks straight or curved on plan to any radius half brick thick wall built in CM (1: 4), complete all as specified and directed.

M&L for brick work with sub class B brick straight or curved on plan exc 6 m mean radius built in CM 1: 6 complete all as specified.

M&L for brick work with sub class B brick straight or curved on plan exc 6 m mean radius built in CM 1: 6 (Except brick), complete all as specified and directed.

M&L for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) as in ladder, cooler stand, chowkhat, complete all as speciifed and directed.

M&L for Cutting holes into or through brick walls built in cement mortor superficial area n exc 150 sq cm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.

M&L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15 mm thick screed bed or bedding layer in CM (1:4), complete all as specified and directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in vertical surface, skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with & including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed.

Taking down main switches, distribution boards and cut outs etc. of any type and capacity along with the existing boards and removing the same from site and making good the disturbed surface/portion of walls complete all as specified and directed by Engineer-in-Charge.

Taking down carefully sub main wiring of any nos of wire and size with earth wire on wooden batten/surface conduit/casing caping complete with its all accessories, complete all as specified and directed.

M&L for point wiring light/fan/bell point with PVC insulated FRLS unsheathed single core cable of multistranded copper conductor of size 1.5 sqmm as phase & neutral drawn in and including PVC conduit medium grade not less than 20 mm dia, ISI marked, duly concealed to wall/floor or above false ceiling of suitable size with all fitting and accessories laid on wall/ceiling alongwith 1.5 sqmm stranded PVC insulated FRLS unsheathed copper conductor(Green in color) as earth wire and connected to common earth dolly for the following incl making good to surface with CM(1:4) plaster and paint to match the surface complete incl provn of CI/pressed steel terminal switch box and white bakelite plastic laminated top sheet cover and fixed with brass screws cup washer for fixing switches/ socket/ regulators etc complete all as specified and directed for the following: - (a) one light/fan point

All as per item No. 117 above but cable 2.5 sqmm FRLS for one 5 pin 5 Amp socket outlet point on an independent board.

All as per item No. 117 above but cable 2.5 sqmm FRLS for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per item No. 117 above but for one bell/buzzer point controlled by one bell push single pole one way .

All as per item No. 117 above but for Two way point control by Two two way 5 Amp swithes.

All as per item No. 117 above but for one 6 pin 15/16 amps socket point on an independent board with cables of size 2.50sqmm.

All as per item No. 117 above but for one 6 pin 15/16 Amps socket outlet on independent board with cables of size 4.0sqmm (for Geyser & AC).

S&F for switch piano, flush type, 5 amps, single pole , one way , 230 volt complete all as specified and directed.

S&F for switch piano, flush type, 5 amps, single pole , two way , 230 volt complete all as specified and directed.

S&F bell push switch 5 Amp flush type complete all as specified and directed.

S&F for 5 pin, 5 Amp/ 6 Amp , socket outlet, flush type, 2 in 1 complete all as specified and directed.

S&F switch socket combination 2 in 1, 6 pin 16Amps multipurpose type 240 volts complete all as specified and directed.

S&F Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F LED retrofit lamp of capacity 12 watt, B-22 holder base with polycabonate body and aluminium heat sink warm white complete including taking down old/ unserveciable CFL/bulb complete all as specified and directed.

S&F LED retrofit Inverter lamp of capacity 9 watt,power backup upto 4 hrs B-22 holder base with polycabonate body and aluminium heat sink warm white complete including taking down old/ unserveciable CFL/bulb complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.

S&F electric bell ding dong type AC 230 Volts, 50 Hz single pole complete all as specified and directed.

Supply & fixing fan regulator, modular type, 120 watt single phase complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way 240Volts with 200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40Amp current carrying capacity in the MCB DB with connection testing and commissioning, complete all as specified and directed.

S&F MCB Single Pole, 6 to 32 Amps 240 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed.

S&F 1 x 10W LED Mirror light fitting,2 feet, LED 6000K, Decorative Indirect up-down light for mirror and as wall light application with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed.

S&F for LED bulk head light fitting 9/10W LED 600 Lumen enclosed in polycarbonate body weather proof, LED lighting fixture with co extruded polycarbonate body environmental friendly energy efficient complete with all accessories prewired and making connection with and including 23/0. 0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr fixed n wall firmly complete all as specified and directed .

S&F LED tube light fittings of 18 wattage including rawl/plug ,making connection with and including 23/0 0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr fixed to wall firmly , complete all as specified and directed.

S&F LED tube light fittings of 20 wattage with inbuilt battery backup including rawl/plug ,making connection with and including 23/0 0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr fixed to wall firmly , complete all as specified and directed.

S&F Decorative wall light fixture made up of Polycarbonate, suitable for 15W TU retrofit LED bulb (B-22 base) polycarbonate body, weather proof, LED light fitting fixture with co extruded polycarbonate body, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed. Make Havells Cat No CITY 3, LHDL06160099 or equivalent of Cart part of make mentioned in list of make.

S&F 35 Watt road lighting luminaire with unique peanut optics to ensure uniform distribution, higher spacing between poles and maintenance free system for city roads and Streets, 50% Energy Savings, IP66 Protection PC and FG Cover, High Impact Resistance complete including LED Lamps and all accessories including bracket made out of 25mm bore GI pipe (light grade), 1.20 m long made to shape and fixed to existing pole or bldg by means of 2 Nos mild steel flat iron 40x6mm clamps with suitable size bolt, nuts & washers and connecting with three core flexible copper wire of size 23/0.0076 from ceiling rose to existing junction box complete all as specified and directed.

Supplying & Fixing GI electrode chemical earthing of high conductive, corrosion resistant, CPRI tested maintenance free chemical earthing pit to achive earth resistance value less than or equal to 3 Ohm & EN voltage < 02 V,pipe in pipe technology based in which primary conductor (Pipe) having 40 MM dia and primary conductor is inserted into secondray conductor having 80 MM dia. The primary conductor is inserted into secondory conductor and space between secondary and primary conductor of earthing electrode should be crystalline compound. The length of this electrodes is min 3000 MM (3 meters) and earth pit's bore hole should be of dia 200 to 250 mm and min depth 3.50 meters. Length of electrode will be increase with connecting of 25 x 4 mm GI strip extra,and total depth should not less than 3.50 meters. Around the earth electrode earth pit borehole should be backfilled with minimum 50 Kg of ground enhencement compound ERIC Contains mixture of Silica sulphate,Alumina, Iron Oxide, titanium Oxide, Calcium Oxide,Sodium Oxide, Zink Oxide etc. ). including RCC earthing pit having 450 x 450 Cl chamber cover all as directed by Engineer-in-Charge.( Note : If less than 3 Ohm result has not acheived at site the contractor is responsible to do grid system to achieve the desired result and no extra payment shall be made to the contractor for making grid system.) Make Remedies / MRS agency.Model G-80

S&F sub main wiring with two single core FRLS PVC insulated unsheathed multistranded copper conductor of size 6 Sqmm nominal cross sectional area and one run of 6 sqmm nominal cross sectional area FR PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 20mm dia 'medium grade' PVC concealed conduits and fittings, complete all as specified and directed. Note:- One unit length shall measured as two run of main wire and one run of conduit & earth wire

Taking down carefully ceiling fan by disconnecting all electrical connection, sealing cable end, dismantling blades and removing fan and blades to store, complete all as specified and directed. Note:- Existing fans shall be deposited by the contractor in AGE E/M Varanasi yard).

Taking down existing Exhaust fans including louver shutter and electrical connection and depositing to MES store and S&F of new exhaust fan heavy duty exhaust fan 250 mm sweep ,single phase 240 volt including making holes and electrical connection through wire of 3 core 23/0.0076 copper conductor marking MES No wirh paint complete all as specified and directed.

S&F in repair two pin and earth plug and socket with 1 MCB single pole 20 to 32amps 'C' series 10KA in sheet metal enclosure and connecting complete all as specified and directed.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, ceiling fan with AC Motor, 3 Nos. blades, 30 cm long down rod, 2 Nos. canopies, shackle kit, safety rope, copper winding, electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, suitable for 230 V, 50 Hz, single phase AC supply earthing complete all as directed.

Supply, laying and testing (in replacement) of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core, complete all as specified and directed.

Taking down LT Panel board, steel enclosure with MCCB/MCB of any capacity including steel board and making good disturbed surfaces of walls to match the existing complete all as specified and directed.

SHIV SHANKAR MISHRA (BID ID -3371697)

L.K.R.TIWARI CONSTRUCTION (BID ID -3379203)