Renovation and up gradation of Video Conference Hall in the Commissionerate of Transport, Assam

Amount

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. kg

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of size Size of Tile 600 x 1200 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is onded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and fixing 25 mm thick shutters for cup board etc. : Panelled or panelled & glazed shutters : Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete.

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter

Providing and fixing toilet paper holder : C.P. brass

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-ALPE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as per direction of the engineer in charge. External work 1216 (16 mm OD) pipe

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend

Single tee without door 110x110x110 mm

Providing and fixing wall panelling interior partition walls, colmn chowkath etc. as directed and specified by the department

Providing, fitting and fixing Johnson Roller Blinds (Combi Nlackout) make and shade, design as per choice complete as specified and directed by the department at all levels

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet

5/6 A switch

6 pin 15/16 A socket outlet

15/16 A switch

1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Supplying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV gd solid Aluminium conductor up to 10 sqmm, balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathe, Armour (Aluminium wire for single core up to 70 sqmm , balance Aluminium strip, Galvanized wire for cables up to 2 x 10 sqmm , 3 x10 sqmm , 4 x 6 sqmm & balance all galvanized steel strip) extruded PVC Type ST2 sheathed , 650/1100 V grade as per IS 7908 (Part-I) 1988 armoured U.G. cable as specified and directed by the deptt. (RR Kable/Havells/Polycab or equivalent make as approved by the Department)

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required 100 A 30KA FPMCC

Supplying and fixing of following ways surface/recess mounting , vertical type 415 V , TPN MCB distribution board of sheet steel , dust protected , duly powder painted inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required (Not: Vertical type MCB TPDB is normally used where 3 phase outlets are required) 4 way (4+12), Double door

Supplying with fitting and fixing volage stabilizer 4.0 KVA of the following specification comlete including making necessary connection as approved, specified and directed by the department(Voltas or equivalent make)

Supplying fitting fixing and connection as approved by the Department 1/2 inch & 3/4 inch copper piping with insulationb along with connection as approved by the Department cable incluing testing and commissioing as direce by the department

Supplying installation, testing & commissioing of AC Starter as specified & directed by the department

Supplying with fitting and fixing of Angle iron framing made 50mm x 50mm x 5mm size angle iron for accomodation of 1.00 Ton to 2.00 Ton Window/split type A.C. Machine

Supplying and fixing of 3 Pin Top 6/16 Amp on the existing 6/16 Amp socket including connection as approved by the Department complete as required

Supplying, installation, testing & commissioing of 16w LED Recesses Luminaries SMD LED chip as per LM 80/IS 6106 make Wipro or equivalent as specified & directed by the department

Supplying, installation, testing & commissioing of 36w LED Recesses Luminaries fixture in fit 2 x2 make phillips or equivalent as specified & directed by the department

Supplying, installation, testing & commissioning of Hi-Wall 1.5 Ton inverter 3 star rating non ducted split type Air Conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical connection up to 5 m between the room unit and out door unit (1 TON capacity)

Supplying and fixingfollowing size/modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required 6 Module (200mm x 75mm)

Supplying, installation, testing & commissioing of wall fan 400 mm sweep rpm & max speed 1800 make crompton or equivalent and specified & directed by the department

Supplying, installation, testing & commissioing of the microphone shall be cardioid pre-polarized condensor on table boundary layer microphone designed with on-off switch for use in conference applications. The frequency response shall be 40 Hz 20,000 Hz and Sensitivity shall be 10mV Pa Nominal impedance at 1 kHz shall be 200Ω. Equivalent noise level shall be 26 dB () or 39 dB weighted as per CCIR 468-3 Dynamic range shall be 111 dB() Maximum SPL shall be 140 dB Make Sennheiser Crown/Beye

Supply, installation, testing & commissioing of DSP core with 64 x 64 Dante on a dual NIC, 16 user-configured card stlots, Lua scriting engine, optional software -licensed Hear Clear AEC.34X8 AEC US Make -Bxilica/QSC/Yamaha/Biamp/Clearone/Audio Technica

Supply, installation, testing & commissioing of wirless handheld microphone for audienceake-Sennheiser/AKG/Beyer dyanamic

Supply, installation, testing & commissiig of 4 full range ceiling speaker with 70V 30W (170Ω), 100V 30W (330Ω) Sensitivity (1W, 1m) 87dB SPL*1 Maximum SPL (Calculated 1m) 108dB SPL*2 Make-Yamaha/JB L/QSC

Supply, installation, testing & commissioning of line source loudspeakers with frequency Range 70Hz-20kHz, power rating 40W Make-Yamaha/JB L/QSC

Supply, installation, testing & commissioing of 4 channe Power Amplifier with ATR (Accelerated Transient Response) Technology with 4 x 75 Watts into 4ohms ; 4 x 50 watts into 8 ohms, servo balanced XLR and 1/4" TRS inputs plus professional speaker connecors Make- Behriger/C rown /QSC

Supply, installation, testing & commissioning of 75 inch ULTRA HD pcture quality with type of Edge ; Resolution 3840 x 2160 (UHD) Brightness 330cd/m2 veiwing angle degree 178˚ /178˚; Aspect ratio 16:9 original 4:3 vertical zoom , Alldirection zoom, interface 2 x HDMI, 2 x USB: rear RF, AV in digital optical Audio out RS-232C, Headphone out, RJ45, External speaker out make-LG Sony/Pa nasonic

Suply, installation, testing & commissioing of Quick decision making and extensive information sharing are essential for today's business; Full HD 1080p image quality. Expandable up to 6 sites connection with optional licence; Communication Methd- SIP, H.323; Video Compression Method -H.261(mainstream only) H.263, H263+, H.263+ (reception only) H.264 High Profile , H.264 Baseline Profile; Remote Camera Control -H.224, H.281 (Zoom/Pan/Tilt/PReset); Communication Bandwidth -256 kbps to 18 Mbps; Video Compatible Resulations*2 -1024 x 768p, 1280 x 720p, 1280 x 768p, 1280, 800p, 1920 x 1080p; No of frames -Max 60 frames/ second Make-Panasonic/S only Polyco

12 X Optical/10X Digital Zoom PTZ Camera Make-Panasonic/S ony/Polyco

Supply of Perpetual license for soft VC Make-Panasonic/S ony/Polyco

Supply, installation, testing & commissioning of havels transparent FR PVC insulate, twin core copper conductor (Flexible) Industrial Speaker Cable. Make_Krystal

Supply, installation, testing & commissioing of Balanced microphone cable with single shield high flexible, velvet faint PVC-Jacket, Industrial standard clone product very similar to competition products of the industry; PVC 60 mm max ø Copper wires (0.10mm) 100 % coverage Make -Gotham

Supply, installation, testing 7 commissioning of the SRW190 wall-Mount Rack Enclosure network applications with limited floor space . Make -APW/Valrac

Supply, installation, testing & commissioing of 10 mtrs HDMI Cable with 24K gold-plated connectors resist corrosion . Make-Aten/Kramer/Milestrop ro

Supply, installation, testing & commissioing of 10 mtrs HDMI Cable with 24K gold-plated connectors resist corrosion . Make-Aten/Kramer/Milestrop ro

Supply, installation, testing & commissioing of HDMI switcher for switching Make-Aten/Kramer/Milestrop ro

Supply, installation, testing & commissioing of HDMI 1 in 4 out hdmi splitter Make-Aten/Kramer/Milestrop ro

Supply, installation, testing & commissioing of HDMI Repeater with Audio Embedder and De-Embedder Make-Aten/Kramer/Milestrop ro

Supply, installation, testing & commissioing of Pop Up Box with Two (2) female VGA HD connector and 3.5mm mini stereo audio jack; Two (2) CAT RJ45, Make-Magnum/M x/Generic

Supply, installation, testing commissioing of USB extension cable cum receiver

Supply, installation, testing & commissioing of HDMI transmitter & receiver. Make-Aten/Krame r/Milestronp ro

Brajen Das