8043 SPECIAL REPAIRS TO BLDG NO T 36 OF 13 FD SUB GP SPECIAL REPAIRS TO BLDG NO SR32 SINGLE OFFRS ACCN OF 13 FD SUB GP PROVN OF 09 INTO ENCLOSURES BOX WITH CHAIN LINK FENCING INTO COVERED SHED NEAR BLDG NO 21 AT 25 ARMY DOG UNIT AND ADDN ALTN

Amount

Demolition of Cement concrete in ground floor on paving n.exc 15 cm thickness (below or above ground level) and removing rubbish off the premises complete all as directed.

Dismantling ceiling boards of AC sheets or any description of any thickness including cover fillets etc and removing from site complete all as directed.

Dismantling single layer Mangalore pattern or similar tiles in roofing and removing of unserviceable tiles from site complete all as directed.

Dismantling battens for tiles, shingles etc. of any size including tilting fillets, spaced exc.15 cm and removing from site complete all as directed.

Dismantling of plain or corrugated, steel sheeting, any gauge, thickness and keeping aside for reuse in the work complete all as spedified and directed.

Dismantling timber scantling 40 Sqcm and over in section as in unframed work and removing from site complete all as directed.

Taking down cement plaster on stone walls or concrete surfaces etc incl racking out joints, hacking for key, scrubbing down with water etc and removing rubbish off the premises complete all as diredted.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc. 1.50 Sqm and not. exc. 4Sqm. each and removing from site complete all as directed.

All as per item No 8 here-in-before but n exe 1.5 Sqm each.

Taking down shutters of any description exc 1 sqm but n.exc. 2 Sqm each & removing from site complete all as specifed and directed.

Dismantling of AC( corrugated, semi corrugated etc) sheets in roofing including ridges and removing from site complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors complete all as directed.

Taking up or down steel tubing 15 mm bore & connections and removing from site complete all as directed.

Excavation for post holes in hard/ dense soil not exc 0.5 Cum each and getting out including returning , filling by ramming earth and removing surplus soil at a distance not exc 50 m complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth and getting out in hard / dense soil complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm complete all as specified and directed.

Removal surplus soil to distance n exc 50 mtr and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

M & L plain cement concrete 1:4:8 type D2(40 mm graded stone aggregate) as in foundation complete all as specified and directed.

All as per item No 18 here-in-before but PCC(1:3:6) type C-2.

M & L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) gde C-5 and built in CM 1:6 complete all as specified and directed.

M & L for RCC 1:1.5:3 type A1 (20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and directed.

Use and waste of form work to sides and soffits of floor or roof beam, beam hauchings, girders, bressummers, lintels cantilevers, shelves including supports, overhangs, etc also splays between floors and beams etc for flat, rough finished surface complete all as specified and directed.

S & F 35 mm thick flush shutters, solid core construction with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 30 mm thick 2nd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, gauge etc sizes of members of shuttes as specified in SSR Part-I Section 8, clause No 8.24 (a) complete all as specified and directed.

M & L for cutting holes in brick wall, built in CM for inserting hold fast and making good dismantled portion in CM 1:3 (depth of embedded portion of hold fast or lugs measured from the face of the jamb into the wall) half brick but n.exc. one brick thick wall complete all as specified and directed.

S & F mild steel butt hinges, cold rolled medium weight 100mm size complete all as specified and directed.

S & F mild steel barrel tower bolts 200mm long, stove enamelled black, with bright bolt complete all as specified and directed.

S & F mild steel pressed handle 150mm size, oval type, stove enamelled black complete all as specified and directed.

S & F 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples completed all as specified and directed.

S & F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring overall length of cover plate 140mm complete all as specified and directed.

S & F in repairs 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S & F continuous (Piano) hinges, mild steel bright finished or electro galvanised width of flap 30mm complete all as specified and directed.

S & F in repairs 75mm size hasp and staple aluminium anodised safety type with MS hinges pin including bolt to hinge plate and fixed with screw complete all as specified and directed.

M&L mild steel rolled section as in joist, channel, angle, rafter, purlins or tee sections, fixed independently, without connecting plates etc (cut to ordinary lengths i.e within 20 mm of the length indicated) confirming to Fe 290, Gde E-165 complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete including PCC (1:3:6) filling all as specified and directed size of frame 125 x 60 mm.

All as per item No 36 here-in-before but size of frame 105 x 60mm.

M & L for angle iron as in post and struts of fencing etc including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, framed work of watertanks and similar work confirming to Fe 290 Gde -E-165 complete all as specified and directed.

S & F MS work in small articles such as hold fast etc. all as specified and directed.

S & F Steel windows with side hung shutters including projecting type hinges with steel handle, steel peg stay, with glazing bars, dovetailed or welded complete all as specified and directed.

M & L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel, sheeting or other covering, running rails and guides) confirming to Fe 410-W (gde-E-250 quality B) and hanging also fastening and fixing complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type all as directed. Note : Weight of chain link fencing shall be ascertained by a BOO ordered by Accepting Officer.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

S & F Mild steel screw bolts 5 to 10 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and 5 to 10mm dia complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per item No 46 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

M & L Roof tiles, Mangalore pattern, class 'AA' , inerlocking at side joints, laid dry complete all as specified and directed.

Fixing only roof tiles, obtained from item No 3 here-in-before complete all as specified and as directed.

Fixing only plain or corrugated sheet of any gauge, thickness obtained from item No 5 here-in-before in roof all as specified and directed.

S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /clading to wall fixed with self taping screws complete all as specified and directed.

All as per item No 51 here-in-before but plain steel sheet in reidges.

M & L for 10 mm thick gypsum board sheet for ceiling on and including aluminium powder coated grid work 60 cm x 60 cm with using 36.5 mm x 23.5 mm x1.5 mm thick main tee, 23.5 x 23.5 mm x 1.28 cross tee and 25 x 25x 1.5 mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 4.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 605 x 605 mm, and applying three coats of white wash complete all as specified and directed.

M & L for 100mm thick PCC 1:4:8 type D-2 (40mm graded stone aggregate ) as in sub base complete all as specified and directed.

All as per item No 54 here-in-before but 75mm thick PCC (1:3:6) type C-2.

M & L for 25mm thick PCC 1:2:4 type B0 (12.5mm graded stone aggregate ) and finishing the surface even and rough to receive top layer complete all as specified and directed.

M & L for machine cut Kota stone slab flooring 20-25mm thick over and including 15mm thick cement screed base in CM (1:6) laid and jointed with grey cement slurry mix with pigment to match the shade of the slab incl rubbing and polishing complete all as specified and directed.

All as per item No 57 here-in-before but in risers of steps, skirting, dado, pillar etc and over 15mm thick cement screed bed in CM (1:4).

M & L for machine cut cudappa stone slab 20-25 mm thick using as support of washing basin platform including rebbing and polising complete all as specifed and directed.

M & L for granite ( of any type ) work ( table rubbed and polished ) 18 to 20 mm thick in steps, jambs, pillars, window cill , cooking platform and like in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite with and including screed bed or bedding layer 15 mm thick, in CM 1:6 complete on stone masonry surfaces all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M & L non skid ceramic colored tiles 7to8mm thick, (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for coloured glazed ceramics tiles 300 x 200 x 7 to 8 mm/ 450 x 350 x 7 to 8 mm thick in vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surface complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brickwork or concrete surface in CM 1:6 complete all as specified and directed.

M & L for 15 mm thick rendering in CM 1:4 on other than fair faces of concrete or PCC block masonry other than surfaces and finish even and smooth with out using extra cement complete all as specified and directed.

M & L for preparation of newly plastered wall surface and applying two coats of oil bound distemper over a coat of 2 mm thick wall care putty complete all as specified and directed

M & L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M & L for preparation of newly plastered surface of wall and applying three coat of white wash complete all as specifed and directed.

M & L for preparation of new wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for two coats of synthetic enamel paint on steel surface over 10cm in width or girth over one coat of red oxide primer incl preparation of surfaces complete all as specified and directed.

All as per item No 70 here-in-before but n exc 10cm in width or girth.

Complete removal of existing treatment and M&L for applying 2mm thick wall care putty and applying two coats of oil bound distemper on walls all as spd and directed.

M & L for one coat of synthetic enamel paint on wooden surfaces of any description not otherwise discribed over 10 cm width of girth including preparation of old painted surfaces complete all as specified.

M & L for one coat of synthetic enamel paint on steel surfaces of any description not otherwise discribed over 10 cm width of girth including preparation of old painted surfaces complete all as specified.

S & F 3mm thick sheet glass ordinary quality with oil putty in square n.exc 0.50Sqm in each pane complete all as specified and directed.

Supply and hoisted in position 1000 ltrs capacity rotational moulded polythylene water storage tanks double layered (cylindrical vertical with colsed top) with and including 20mm bore ball valves of PTMT with epoxy coated aluminium rod and high density plastic ball including taking down old u/s water tank complete all as specified and directed.

S & F 15 mm bore GI tubing medium grade with all fittings & fixed complete to walls / ceiling or laid in floors complete all as specified and directed.

S & F stainless steel sink with drainage board made of stainless steel 1 mm thick with plugs washers and waste including bedding in cement mortar or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm X 330mm X 160 mm complete all as specified and directed.

S & F in repairs 15 mm bore bib taps,fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair 15 mm bore pillar taps, fancy type cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lattered "HOT" or "COLD" with long screwed shanks and fly nuts, complete all as specified and directed.

S & F in repairs 15mm bore stop valve cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repairs 20mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F in repairs wash hand basins, vitreous china of size 550mm X 400mm ( flat back or angle back type) including cutting for and pinning in ends of brackets inclusive of supply and fixing waste pipe etc. complete all as specified and directed.

S & F PVC waste pipe for WHB, urinals & sink flexible type of 25mm dia complete all as specified and directed.

S & F 15 mm bore, 600 mm long PVC connections with brass unions internally threaded both ends complete all as specified and directed.

S & F 150mm size square grating of PTMT (min weight 100gms) complete all as specified and directed.

M & L PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls complete all as spcified and directed.

S & F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specifed and directed.

M & L PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed.

M & L for Point wiring using colour coding as per IS with 1.5 Sq mm multistranded copper conductor single core FRLS PVC insulated sheathed 1100 Volts, ISI-694 marked drawn through suitable size of Casing & Capping on wall /roof/ floor along with suitable fittings, with MS sunken boxes of 1.6 mm thick of suitable size including making good disturbed surfaces to match with existing finishes including 3mm thick laminated sheet ISI marked for housing switches sockets etc along with1.5 Sq mm copper conductor FRLS, PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly including taking down old u/s point wiring with all fixtures and fittings complete all as specified for the following :-

(a) One light point controlled by one, one way switch

(b) One ceiling fan/ exhaust fan point controlled by one, one way switch and regulator.

(c) One 3 pin socket outlet,5 Amps on same board with other switches, cables 1.5 sqmm size

(d) One 3 pin socket outlet,5 Amps on independent with cables, 1.5 sqmm size

(e) One bell point controlled by one switch

All as per Item No 90 here-in-before but with stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent board, including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

M & L for Point wiring using colour coding as per IS with 1.5 Sq mm multistranded copper conductor single core FRLS PVC insulated unsheathed 1100 Volts, ISI-694 marked drawn through duly surface conduits of suitable size on wall /roof/ floor along with suitable feetings, with surface PVC boxes of suitable size including Sheet cover ISI marked for having switches sockets etc along with1.5 Sq mm copper conductor FRLS, PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly including taking down old u/s point wiring with all fixtures and fittings complete all as specified for the following :

(a) One light/Ceiling Fan point controlled by one, one way switch

(b) One three pin 5 Amps socket outlet point controlled by one No one way switch on same board

(c) One three pin 5 Amps socket outlet point controlled by one No one way switch on independent board

All as per item No 92 here-in-before but with stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly all as specified & directed.

S & F switch piano flush type single pole one way 5 A, complete all as specified.

S & F Piano switch one way flush type single pole 15 A, complete all as specified.

S & F Bell push, flush type, 5 amp complete all as specified and directed

S & F socket outlet 2 in 1, 3 pin, 5A complete all as specified.

S & F Socket outlet 2 in 1, 3 pin, 5 and 15A complete all as specified.

S & F for Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed.

S & F Bell, AC. 230 volts,single pole complete all as specified and directed.

S & F celling rose 2/3 terminals, PVC/ polycarbonate, isolated body ISI marked complete all as specified.

S & F Lamp holder, PVC/Polycarbonate type with back plate including 12 watt LED bulb complete all as specified and directed.

S & F MCB DB, SPN, sheet metal enclosure, 8 way with 200 amps rated bus bar double door, fixed on wall and maing good to disturbed surfaces, and connection including dismanting old u/s DB alongwith MCB's complete all as specified and directed.

All as per item No 104 here-in-before but 4 way.

All as per item No 104 here-in-before but 4 way TPN double door.

S & F MCB double pole of rated capacity 32 amps, 240 volts breaking capacity 10 KA, C-curve complete all as specified.

S & F MCB Single pole rated capacity 6 to 32 amps, 240 V breaking capacity 10 KA ,C- curve complete all as specified.

S & F MCB FP of rated capacity 63 amps, 415 volts,50 Hz 10kA, C-curve complete all as specified and as directed.

Taking down ceiling fan/ exhaust fan of any sweep, keeping with safe custody and refixing the same with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal over hauling the fan and Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and as directed.

M & L Submain wiring with 2 runs of single core 4 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor drawn through and including non-metalic PVC, casing caping ISI marked and its accessories in wall/ roof/floor including one run of single core 4 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor connected from DB to DB/ main board complete including taking down old u/s submain wiring all as specified and directed.

S & F LED Tube light fittings wall mounted, 18 W LED 6500K with Opal white Poly Carbonate diffuser provided with high efficient integral constant current LED Driver 230 V etc. complete with mounting batten including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from ceiling rose to connector Conforming to Cat Part No. BLRB DB 118 & BLRB18 W CW LED of Make Bajaj or equivalent model from the specified make given in PS including dismantling of old lights fittings complete.

S & F LED street light of cap 45W presure die cast housing with individual LEDs as light source and lens embedded PC cover having TOP opening separate driver compartment with 66 protection and impact resistance of IK 07 with pre wired and necessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia 40mm GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete. Make :- Bajaj Cat No. BRTFG 45W LED V2 or equivalent model from the specified make given in PS including dismentling of old light fittings complete.

S & F for wall mounted LED tube light fitting 10 watts with output of 1000 lumens , box type (decorative) light fitting, 230 volts with extruded CRCA sheet coated heat sink provided for efficient heat dissipation and integrated electronic driver connector block etc, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 2' x 10 watts complete all as specified and as directed. Make :- Make Bajaj Cat part No BCLSB 10 NW or Equivalant model from the specified make given in PS including dismantling of old light fittings complete.

Supply and fix Energy Efficient Ceiling Fan of 1200 mm sweep, high speed, low power consumption, Superior Aluminium Blades and provision of 3 core flexible copper conductor cable of size 23/0.19 from ceiling rose to ceiling fan complete with and including electronic fan regulator along with suitable GI rods as per site requirement all as specified. Conforming to Cat Part No. KASSELS 50 of Make :- Bajaj or Equivalant model from the specified make given in PS.

Supply and Fix exhaust fan of sweep 380mm with louver heavy duty single phase suitable for 230 volts 50 HZ,1400 rpm and connecting up complete including provision of 3 core flexible cord from ceiling rose to connector of fan with cable suitable size. Make :- Bajaj, Item Code - 70066 SUPREME PLUS or Equivalant model from the specified make given in PS.

M & L for Earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3, SSR Part I- 2009 with 15 mm dia light grade GI pipe as protection and 20 mm dia medium grade GI pipe for watering purpose inlcuding funnel, wire mesh, RCC pit with cover complete and connected to earthing test point all as specified or indicated including testing on completion.

M & L for 2nd class hard wood, scantling, clean sawn, timber fixed, secured with nails as in rafter, purlins etc complete all as sepcified and directed.

Fixing only for 2nd class hard wood, clean sawn, scantling obtained from item No 6 here-in-before secured with nails as in rafter, purlins etc complete all as specified and directed.

M & L for 2nd class hard wood clean sawn battens sectional area exc 15 but n exc 25 sqcm, spaced at 15cm centres complete all as specified and directed.

Fixing only 2nd class hard wood obtained from item No 4 here-in-before all as specified and directed.

M & L for 0.63 mm thick galvanized, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zine coating 275 complete all as specified and directed.

S & F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafter and running rails, fixed with angle cleats or other connection plates including necessary welding confirming to Fe 410-W (grade E-250) quality A complete all as specified and directed.

L.T Associate

Parhar Enterprise