Construction of New Ration Shop building at Kamarajapuram Ward No.29 in Pudukkottai City Municipal Corporation

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete

Foundation

Grade beam

Supplying and filling with good clean river sand for foundation and basement including all cost and conveyance of all materials and labour charges etc. complete as per standard specification.

P.C.C 1.4.8 (one cement four sand and eight aggregate) using 40mm ISS HBG metal Including cost and conveyance of all materials and labour charges complete as per Standard specification

Supply and erection centring for sides and soffits of all RCC works including cost and convyance of all materials to site and labour charges etc, complete. as per standard specifications

Column

Beam and Slab

Suppling and fabricating MS (or) R.T.S. bar as per the design given including cost of steel and binding wire also in all floors -1 etc., completed per standard specification

Reinforced Cement Concrete 1:11/2:3 using 20mm Indian Standard Size Hard Blue Granite metal from approved quarry including cost and conveyance of all materials and labour charges etc. complete as per Standard specification

Brick work in Cement Mortar 1:5 mix using country bricks of size 8 3/4" x 4 1/4" x 2 1/4" including all cost and conveyance of all materials and labour charges etc. complete as per standard specifications

Blow basement

Above basement

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Manufacturing supplying and fixing of MILD STEEL DOOR made out of 50 x 50 x 6 mm M.S angle for outer frame,35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets (18 G) with 5Nos, of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase of Double shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers.

Supply and fixing of RCC JOLLY including cost and conveyance of all materials and all labour charges etc, complete

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Supplying and erecting pull and push type rolling shutter with I.S.I. make of approved size and section using 18 gauge G.I.sheet with manually operated type. The Shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc, complete as per standard specification.

Special ceiling plastering with cement mortor 1:3 mix to 10mm thick including cost and conveyance of all materials to site and all labour charges etc, complete

Plastering with Cement mortar 1:5mix (One cement and five sand) with 12 mm thick etc., including cost and conveyance of all materials and labour charges etc., complete as per standard specification.

Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

White washing two coaats using best freshly burnt white shell lime in all the floors, including cost of lime blue powder fevicol, type gums, brushes, scaffolding charges etc, complete with standard specification.

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats of new iron works such as steel doors, Windows, Ventilators window bars, Balustrades, etc, with best approved first quality of synthertic enamel paint of apporved colour over the existing priming coats etc, complete.

Whethering course with best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be listed) over the RCC roof slab in the proposition being brickjelly to lime 32:12:1/2 by volume and laid into a single layer and consolidat

Finishing the Top of roof with one course of Machine pressed tiles of 18mm (average) thick of approved quality CM1:3 12mmthick mixed with WPC at 2% by weight of cement used and top pointed with the same mortar etc complete

Supply and fixing cuddappah slab to a thick of 38mm including cost and conveyance of materials all labour charges etc, complete

Supply and fixing 100mm dia 4kg /sqm PVC pipe including cost and conveyance of materials all labour charges etc, complete

Wiring with 2x1.5sqm (22/0.3) PVC inculated SC unsheathed cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box with with SA.F.T.sqitch inflush with wall, covered with hylem sheet of sheet of 3mm thick with painting of suitable colour of open PVC Light POINT /FAN POINT including all charges etc., Complete (As per S.D.20)

Fan point

Light point

Wiring with 2x1.5sqm (22/0.3) PVC inculated unsheathed cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mmx 100mm x 113mm TW switch box in flush with wall with 3mm thick Hylem sheet cover for 5 A 3 pin non inter locing CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point (SD No.35)

Supply and run of 2 of 1.50sqm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade on 7/20 GI bearer wire for service connetion mains.(As per SD No)

Supply and fixing of single box type 4'40 W flu fitting complete with compper choke and condensor, with conduit pipe suspension form the ceiling with PVC unsheathed copper leads form terminals to the fitting with type

Supply and run of 2 of 4 sq.mm (56/0.3) PVC inculated SC unsheathed Cu. Conductor of 1100 V grade in 25mm dia GI pipe ( Class 'B') suitably bent at both ends with necessry angle iron upright and end.(SD No.68)

Supply and fixing of 1200mm (48") AC ceiling FAN complete with stepped etecronic 300 w regulator with 300mm down rod on the existing clamp (as per SD 106)

SURESHKUMAR (BID ID -1132630)