SPECIAL REPAIR / REPLACEMENT OF STARTER LT PANEL AND ALLIED WORKS OF RADIAL WELL UNDER GE (WEST) MATHURA

Supply, installation, testing and commissioning in replacement of fully automatic oil immersed auto Transformer motor starter/ controller panel (padestal type) filled with transformer oil for suitable for 125 HP rating induction motor, rated voltage 415 volt AC in sheet steel enclosure with IP 53 protection duly painted with weather resistant enamel paint, copper wire wound oil immersed auto transformer having E class insulation, impregnated in varnish with voltage tapping of 50%, 65% & 80% of rated voltage suitable for 03 stars/Hr in duration of 15 second each wire 03 nos oil immersed contactors, thermal overload relay of range 120 to 200 Amps, coil voltage 415 volt AC, OP, Class 03 push button for ON-OFF operation, with provision of Ammeter, Voltmeter with selector switch and ON, OFF & Trip indication LED lamps including voltmeter, single phase preventer, HRC fuse fitted inside the panel all as confirming to IS/IEC 60947-4-7 : including dismantling of old worn out air cooled starter complete in all respect and as directed. Make : Jyoti / Bentex / BCH or as approved.

Supply, installation, testing and commissioning in replacement of fully automatic oil immersed auto Transformer motor starter/ controller panel (padestal type) filled with transformer oil for suitable for 100 HP rating induction motor, rated voltage 415 volt AC in sheet steel enclosure with IP 53 protection duly painted with weather resistant enamel paint, copper wire wound oil immersed auto transformer having E class insulation, impregnated in varnish with voltage tapping of 50%, 65% & 80% of rated voltage suitable for 03 stars/Hr in duration of 15 second each wire 03 nos oil immersed contactors, thermal overload relay of range 90 to 150 Amps, coil voltage 415 volt AC, OP, Class 03 push button for ON-OFF operation, with provision of Ammeter, Voltmeter with selector switch and ON, OFF & Trip indication LED lamps including voltmeter, single phase preventer, HRC fuse fitted inside the panel all as confirming to IS/IEC 60947-4-7 : including dismantling of old worn out air cooled starter complete in all respect and as directed. Make : Jyoti / Bentex / BCH or as approved.

Supply & laying in replacement cable, 1100 volts grade heavy duty with ''XLPE'' insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 120 Sqmm x 3.5 core size including fixing in Open with the help of saddles and nut bolt of suitable size all as specified and as directed.

Supply, testing and commissioning in replacement of LT electrical out door distribution panel board floor mounted cubical type dust proof, weather proof, vermin proof, astehically designed, having at least IP-54 degree of ingress protection, fabricated from 3.15 mm thick CRCA sheet with front and rear opening including bus bar chamber, continuous GI strip earth bus bar 4 strips of Copper bus bar minimum 1000 Amps capacity having suitable cross sectional area, insulated color sleeves, procelain/epoxy insulators, rail channels cable alloy, danger notice board including provision of angle iron frame of size 50 x 50 x 6mm, 30 cm grouted in ground floor and 30 cm above GL duly painted including necessary excavation, foundation, PCC etc complete with locking arrangement duly powder coated of approved color connecting incoming & outgoing cable connection with suitable lugs, nuts, bolts, washers and cable joints, prewired complete with PVC insulated fire retardant copper conductor cable complete The panel shall be comprising of the following:- Cont/-

Cont/- (a) Phase indicator lamps,modular,LED type (R-Y-B)-03 Nos for I/C Power-05 Nos (b) LED Multifunction Meter Input voltage measurement range 17-520 VAC (P-P) Aux supply 90-300 VAC Flush mounting 96 x 96 mm Site selectable 1A /5A CT/PT site programmable V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhoursetc-05 No (c) 04 Pole MCCB 630 Amp, 50 Hz ,415 V with rupturing capacity 50 KA -01 No.(I/C) (d) ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 630 Amps-01 No (e) MCCB 4 POLE 415 V 250 A (35 KA) ,4 pole with adjustable thermal setting-04No.(03 O/G+ 01 S/By) (e) MCB TPN 32 Amps 240V, 10KA 'C' curve-04 Nos

S&F in replacement PVC cables copper conductor insulated and unsheathed multistranded single core of size 70 sqmm 1100 V including copper lugs complete all as specified and directed.

S&F in replacement PVC cables copper conductor insulated and unsheathed multistranded single core of size 50 sqmm 1100 V including copper lugs complete all as specified and directed.

Supply, installation, testing and commissioning in replacment of integrated LED Solar Street Light fitting of minimum 20 Watt capacity complete with high efficiency LED luminaire having minimum system efficacy suitable for outdoor illumination, pressure die cast aluminium housing with IP-65 protection, colour temperature approx. 5700K, complete with inbuilt Lithium-ion battery 14.8 Volt, 115 Wh with minimum 03 days backup and minimum 1000 charging cycles, polycrystalline Solar PV Module, automatic dusk to dawn operation, minimum 02 Nos PIR motion sensors with 360° coverage, suitable charge controller, all internal wiring, connectors, hardware and accessories complete. The fitting shall be mounted on manufacturer recommended hot dip galvanized steel pole of min height 4 mtr /post top arrangement complete with suitable bracket, foundation bolts, clamps, nuts & bolts and grouted in ground with PCC foundation of suitable size as required at site, complete in all respects and as directed by Engineer-in-Charge.

S&F in replacement of LED 70W new generation energy saving, enviroment friendly long life LED street Light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening separate driver compartment with IP 66 protection and impact resistance of IK07 as light socurces with all conected accessories including bolts, nuts, brackets, suitable size of pipes for mounting of Light all as specified and directed.

M&L for Maintenance free earthing with the help of mechanical boring machine of 150 mm dia 12 mtr depth including supply and fix 160 mm dia (O.D),UPVC pipe 6 Kg/sqcm rating -06 mtr long with the help of suitable size clamp with nut bolt and washer -01 No, Supply and fix 12 mtr 50 mm dia perforated GI pipe medium grade lowering in borewell with the help of T & P having suitable hole for providing good condutivity of earthing and M & L for providing 32 X6 mm GI strip up to 7.5 mtr long complete with protected with 40 mm light grade GI tubing and connect with equipment by nut bolt and bore well earthing with the help of suitable size GI nut bolt and washer etc complete. M & L for charcoal ,dust ,salt fill in bore well for earth conductivity M&L for covering of borewell with PCC (1:2:4) typr B-1/Brick masonry pit of size 45x45x45 cm complete all as specified and give the minimum earth result below 5.0 Ohm to provide any chemical etc as required complete including taking down old unserviceable earthing all as specified and directed. Note: (i) Earth strip and GI protection pipe up to length 7.5m shall deemed to be included in rate of above item.