WBPWD/EE/KNHED/e-NIQ-44/2nd Call/24-25

Amount

SITC of Automatic Lift ( as per manufacturer design & as per detailed specification below conforming to IS ) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as reqd. (Duplex System operation) Make : OTIS / KONE/SCHINDLER Type: Bed cum passenger Lift . Load : 20 Passenger / 1360 Kg Control: Microprocessor based with AC variable voltage & variable frequency ( VVVF) Machine:- Energy efficient machine, Gearless, With Machine Room

Position of Machine Room: Directly above the lift Speed:1.0 Mtrs./ Sec Floor served: G+7 Landing: all on same side Operation: Microprocessor based implex full collective with and without attendant. Travel Hight : 24.5 Mtr (Approx) (Bidder should visit the site)

Operation: Microprocessor based implex full collective with or without attendant. Signals: Digital car position indicator,car travels direction indicator in car & at all landing with call registration indicator. Leveling accuracy:±5 mm(Micro levelling arrangement)

CAR Car Size :1300 mm ( W ) x 2400 mm ( D ) x 2300 mm (H) or As per manufacturer's standard conforming to IS Car Entrance : Clear Opening 1000 mm (W) x 2100 mm (H ) protected with car door Car Enclosure: Stainless Steel sheet (20 SWG) with Hairline finish with hand rail. Car Ceiling & Lighting: Stainless Steel with hairline finish with LED lighting and Fan

Car Ventilation: Pressure fan with anodised aluminium grill. Car Flooring : Decorative granite flooring (As per direcion of EIC and according to this Department's Order). Car Door: Stainless Steel centre opening automatic door provided with V3F controlled door drive system Landing Door: Stainless steel centre opening automatic door provided with V3F controlled door drive system

Door Opening: Automatic power oprated door with full length Photocell assembly light curtain sensor COP & LOP : Digital Car postion indicator, car travells direction indicator in car and at all landing with call registration indicaotr. COP & LOP must have stainless steel face plate silver brushed with surface mounted button with braille. Button : All buttons on car & landing shall be luminous & encoded with braille on/off switch for Lift, fan, light, toggle switch or key switch for automatic/attendent mode of operation. Display type : Monochrome / Colour LCD / Segmented LCD / Scroll. Operation Push Buttom for lift maintenance & service should be on top of the car. Fire Rated Door : 2 Hours

PROTECTIVE DEVICES & OTHER ACESSORIES ARD: Automatic rescue device complete with dry maintenance free batteries as required for automatic evacuation to the nearest floor in case of power failure / single phasing/others. Overload Protection:Fully loaded with overload protection.On overloading the lift car will not start with door remaining open and give audio display indication Emergency lighting in car: Battery operated emergency lighting in the lift car.

Intercom system: Battery operated intercom system in Lift Car, Machine Room & Control Room Emergency Alarm: Battery operated alarm bell system in lift car and control room Fireman switch:Fireman switch at main landing terminal.

Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator. Main rope - Rope/Belt Type (Flat Coated steel belt with V groove / Sreel rope)

Communication & Monitoring the Lift : Lift controller/ Panel shall be Ethernet/Modbus ready with necessary converter, DC Power supply module etc. if required, and there shuld be single Ethernet/Modbus output from the Controller/panel and the same should be connected to BMS (Building Management System) and the controller/ panel should have also required for monitoring of real time data with date & time, maintenance-call back record, Mantrap notice, call records, location of car, Lift room temperature etc. should be noticed & display to in any desktop & mobile though wireless system.

Other works: Necessary cutting of wall/floor for fixing the Fire Alarm switch, all Button switch and also making provision to entry of rope, electric wire etc. as required to complete the job.

DIMENSION OF SHAFT & POWER SUPPLY Available Shaft Dimension: 2300(W) mm X 2900(D)mm (Bidder should visit the site) Pit Depth : 1650 mm (Bidder should visit the site) Overhead : 4700 mm (Bidder should visit the site) Electric power supply: AC 415 Volt 3phase, 50 Hz, terminated in machine room as per IS

Terms & Condition i) The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them.

ii) Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/submission of bill.

iii) The rate quoted by the manufacturer should be inclusive of cost for providing 2 years DLP after completion of 1 year of initial commisioning.

iv) Rates should be quoted with minor civil works, wall cutting and mending good the damages to the original finish.

(Rate should be quotated including all taxes and duties and GST)

KONE ELEVATOR INDIA PRIVATE LIMITED (BID ID -5798454)