8349-REPAIRS, POLISHING AND PAINTING OF TP/FD PATTERN FURNITURE INCLUDING REPLACEMENT OF ACCESSORIES AT GENTLE MEN CADETS ACCN, YODHA CADETS MESS AND LC ACCN/ LECTURE HALL AND LIBRARY ETC AT OTA CHENNAI UNDER GE STM

Amount

CHAIR DINING WITHOUT ARM REST (Make Usha lexus) Repairs to Chair Dining without arm rest by removing the following existing u/s wooden members and providing new first class hard wood (teak) members (variable places / sizes) made to existing shape all as specified and shown on drawing.

Rear leg of size 916 x 30 x 30mm

Front leg of size 394 x 44 x 38mm

Side rail of seat frame of size 394 x 64 x 21mm

Front Rail of Seat Frame of size 445 x 64 x 21mm

Back Rail of Seat Frame of size 445 x 64 x 21mm

Stiffener (Side) of size 463 x 25 x 25mm

Corner bracket of size 60 x 60 x 25mm thick

Removing the existing u/s seat and supply and fix new removable seat of existing size and shape with 75mm thick 40 Density foam cushion covered with best quality rexine approved by GE (cost of the rexine not less than Rs.300/- per mtr) over 12mm thick BWR gde plywood and finish with existing shape and size, complete all as specified and as directed.

Tightening the wooden members with bamboo pins wherever required in the chair to made to existing shape all as directed and Preparing the surface of chair dining without arms by smoothly / rubbing with 120 Gde sand paper/ abrasive cloth or various sizes and clean off the stains and upper coat in a manner that the remaining coats of melamine are left on the surface by applying sealer wherever required to fill and smooth the surface including applying two coat of melamine polish with spray machine to the entire external and visible surface complete uniformly upto glossy mirror finish, melamine polish of (Make : Asian/ Berger/ Nerolac), complete all as specified in drawing and as directed.

CHAIR DINING WITH ARM REST ( Make: Usha Lexus ) Repairs to Chair Dining with armrest by removing the following existing u/s wooden members and providing new first class hard wood (teak) members,( variable at places / sizes) made to existing shape all as specified and shown on drawing.

Rear leg of size 855 x 40 x 40mm

Front leg 362 x 50 x50mm

Side rail of seat frame size 425 x 74 x 19mm

Front Rail of Seat Frame 457 x 74 x 19mm

Back Rail of Seat Frame 457 x 74 x 19mm

Removing the existing u/s seat and supply and fix new seat of existing size and shape with 75mm thick 40 Density foam cushion covered with best quality rexine approved by GE (cost of the rexine not less than Rs.300/- per mtr) and finish with existing shape and size, complete all as specified and as directed.

Repairs to Chair Dining with arm rest by tightening the wooden members with bamboo pins wherever required (variable at places / sizes) made to existing shape as directed including preparing the surface of chair dining with arms by smoothly / rubbing with 120 Gde sand paper/ abrasive cloth and clean off the stains and upper coat in a manner that the remaining coats of melamine are left on the surface by applying sealer wherever required to fill and smooth the surface including applying two coats of melamine polish to the entire external surface complete uniformly with glossy finish painting, complete all as specified in drawing and as directed.

DINING TABLE OF SIZE 2133 x 1067 x 756MM Preparing the surface of Dining Table by smoothly rubbing with 120 Gde sand paper/ abrasive cloth and clean off the stains and upper coat in a manner that the remaining coats of melamine are left on the surface by applying sealer wherever required to fill and smooth the surface including applying two coats of melamine polish with spray machine to the entire external/visible surface complete uniformly upto glossy mirror finish, complete all as specified in drawing and as directed.

DINING TABLE OF SIZE 2139 x 1219 x 711mm WITH STAR LEGS All as per Item No.3 above but of size 2133 x 1219 x 711 mm with star legs.

Supply and fix PVC shoes of reqd sizes heavy duty best quality at bottom of each leg of chairs dining and tables dinings etc , complete all as specified and as directed.

Chair Easy with Cushioned FD-358

Removing existing damaged u/s seat cushion of chair easy with cushioned and supply and fixing of new cushion with 75mm thick 40 Density foam cushion covered with best quality rexine approved by GE (cost of the rexine not less than Rs.300/- per mtr) and finish with existing shape and size, complete all as specified and as directed.

All as per item No 6.01 above but back cushion of chair Easy cushioned, complete all as specified in drawing and as directed.

Removing existing damaged u/s cushion from arm rest of chair easy with cushion and supply and fixing of new cushion for arm rest (only cushion 25mm thick and rexine) as per existing shape and size, complete all as specified in drawing and as directed.

Tightening the wooden members with bamboo pins wherever required in the chair to made to existing shape all as directed and preparing the surface of chair dining without arms by smoothly / rubbing with 120 Gde sand paper/ abrasive cloth or various sizes and clean off the stains and applying sealer wherever required to fill and smoothen the surface including applying two coats of melamine polish with spray machine to the entire external and visible surface complete uniformly upto glossy mirror finish, melamine polish of (Make: Asian/ Berger/ Nerolac), complete all as specified in drawing and as directed.

Chair writing Make: Godrej Model PCH -7044T

Removing existing u/s cushion from seat assembly and S&F new cushion moulded type 50mm thick, 50-55 density of sizes 450mmx430mmx50mm of existing pattern size and shape, covered with tapestry cloth of approved colour and quality (rate of tapestry cloth should not be less than Rs 300/- meter) complete all as specified in drawing and as directed.

Removing existing u/s cushion from back assembly and S&F new cushion moulded type 50mm thick, 50-55 density of sizes 380mmx330mmx50mm of existing pattern size and shape, covered with tapestry cloth of approved colour and quality (rate of tapestry cloth should not be less than Rs 300/- meter) complete all as specified in drawing and as directed.

Removing existing u/s PU hand rest and S&F new PU hand rest as per existing pattern and size, to be fixed with s/s screws/nut and bolt as existing complete all as specified in drawing and as directed.

Removing and cleaning the old painted surface by scrubbing smoothing the surface by emery cloth and applying two coats of synthetic enamel black paint or reqd shade to match with the existing shade, complete all as specified in drawing and as directed.

Sofa set 5 seater (3+1+1) Godrej model: L43 & L41

Removing existing damaged u/s seat cushion of Model L 41 & L43 Sofa set 5 seater and supply and fixing of new seat cushion made of moulded type cushion of 50-55 density of size 510x490x70mm of make Godrej as per existing pattern, size and shape complete all as specified in drawing and as directed.

Removing existing damaged u/s back cushion of Model L 41 & L43 Sofa set 5 seater and supply and fixing of new back cushion made of moulded type cushion of 50-55 density of size 510x490x70mm of make Godrej as per existing pattern, size and shape complete all as specified in drawing and as directed.

Removing existing damaged u/s replaceable seat cover of Sofa set 5 seater (3+1+1 from each set) Model L 43 & L 41 of Godrej make and supply and fixing of new replaceable fabric upholstry cover best and approved quality incl heavy duty Zip arrangements of approved black colour suitable for existing shape and size of the seat cover (Cost of tapestry should not be less than 400/- per meter) complete all as specified in drawing and as directed.

Removing existing damaged u/s replaceable back cover of Sofa set 5 seater (3+1+1 from each set) Model L 43 & L 41 of Godrej make and supply and fixing of new replaceable fabric upholstry cover best and approved quality incl Zip arrangements heavy duty of approved black colour suitable for existing shape and size of the back cover (Cost of tapestry should not be less than 400/- per meter) complete all as specified in drawing and as directed.

Removing existing damaged u/s Clamps for Sofa set 5 Seater Model L 43 and L 41 of Godrej make and supply and fixing of new clamps as per existing shape and size with suitable screw complete all as specified in drawing and as directed.

Removing existing damaged u/s 1/2 round PVC bushes from sofa set 5 seater model L 43 and L41 of Godrej make and supply and fixing of new 1/2 round PVC bush best quality heavy duty to back of arm rest suitable to 38mm dia of ERW tube as per existing shape and size complete all as specified in drawing and as directed.

Removing existing damaged u/s bushes screwed type from front legs of sofa sets 5 seater model L 43 and L 41 of Godrej make and supply and fixing of new bush with adjustable s/s screwed type to front legs as per existing shapes and size complete all as specified in drawing and as directed.

Removing existing damaged u/s hard PVC bushes of back leg from sofa set 5 seater model L 43 and L41 of Godrej make and supply and fixing of new hard PVC bush of best and approved quality suitable to the 38mm dia of ERW tube as per existing shape and size complete all as specified in drawing and as directed.

Removing and cleaning the old painted surfac from sofa set 5 seater model L 43 and L41 of Godrej make by scrubbing smoothing the surface by emery cloth, tightening the frame and replacement of old rusted nut and bolts and screws with new S/steel nut and bolts/screws and applying two coat of synthetic enamel paint of reqd shade to match with the existing shade, complete all as specified in drawing and as directed.

Computer operator chair Godrej PCH-5002T

Removing existing u/s cushion from seat Assembly and S&F new cushion moulded type 50mm thick, 50-55 density of required size of existing pattern and shape duly covered with tapestry cloth of approved colour and quality (rate of tapestry cloth should not be less than Rs 300/- meter) complete all as specified in drawing and as directed.

Removing existing u/s cushion from back and S&F new cushion moulded type 50mm thick, 50-55 density of required size of existing pattern and shape duly covered with tapestry cloth of approved colour and quality (rate of tapestry cloth should not be less than Rs 300/- meter) complete all as specified in drawing and as directed.

Removing existing u/s PU hand rust 'T' Type and supply and fixing new PU hand rest 'T' Type as per existing pattern complete all as specified and as directed.

Removing existing pedestal (caster wheel base) and S&F new pedestal S/Steel star wheel base with wheel of heavy duty and approved quality as per existing pattern complete all as specified and as directed.

Removing existing u/s caster wheel and S&F new caster wheel (set of five) heavy duty of approved quality as per existing pattern as directed.

Taking down the Gas lift and mechanism with up lock of revolving chairs and replacing the same with heavy duty Gas lift of approved quality as per existing model and as directed.

TABLE WRITING STEEL ( Make : Godrej –T-8)

Removing the existing u/s lock and S&F new lock 4 lever Make: Godrej, complete all as specified in drawing and as directed.

Removing the existing u/s table Top and S & F new table top of required size which shall be made of 18/19 mm thick prelaminated MDF board both side, exterior grade (grade-I, type-II) ISI marked with approved walnut colour or shade as approved by GE of (make : Century prowud from Century ply/ Green panel max from Green ply/ Action Tessa) with 2mm thick PVC edging of matching colour all round on head board and footboard shall be fixed with strong bonded chemical through hot pressed machine to be provided as per standard workmanship rest all as per drawing and as specified and as directed. Note: Hand pressed/ manual pressed beading/ edging will not be accepted.

Removing existing u/s PVC bush and S&F new bush suitable for legs , complete all as specified in drawing and as directed.

Removing existing u/s PVC Hand Grip and S&F new Hand grip for drawers as per existing shape and size heavy duty best quality, adjustment of setting of drawer for smooth functioning complete all as specified and as directed.

Removing the dents and welding wherever required cleaning the old painted surface by scrubbing smoothing the surface by emery cloth and applying one coat of synthetic enamel Gray paint to match with the existing shade , complete all as specified in drawing and as directed.

Chair writing Make: Godrej Model CH -1018

Removing existing u/s cushion, tapestry from seat Assembly and S&F new cushion 50mm thick, 40 density of sizes 400mmx400mmx50mm of existing pattern size and shape, covered with tapestry cloth of approved colour and quality (rate of tapestry cloth should not be less than Rs 300/- meter) over a plywood of 12mm thick duly fixed with suitable s/steel nut and bolts as existing. Complete all as specified in drawing and as directed.

Removing existing u/s cushion, tapestry from back Assembly and S&F new cushion 50mm thick, 40 density of sizes 400mmx250mmx50mm of existing pattern size and shape, covered with tapestry cloth of approved colour and quality (rate of tapestry cloth should not be less than Rs 300/- meter) over a plywood of 12mm thick duly fixed with suitable s/steel nut and bolts as existing. Complete all as specified in drawing and as directed.

Removing and cleaning the old painted surface by scrubbing smoothing the surface by emery cloth and applying two coat of synthetic enamel Black paint or reqd shade to match with the existing shade, complete all as specified in drawing and as directed.

Removing of existing PVC Caps from the leg and Supply and fix new Hard PVC caps to the bottom of the legs of approved quality heavy duty and all as directed.

Chair writing Make: Godrej Model PCH -7003

Removing existing u/s cushion from seat Assembly and S&F new cushion moulded type 50mm thick, 50-55 density of sizes 460mmx410mmx50mm of existing pattern size and shape, covered with tapestry cloth of approved colour and quality (rate of tapestry cloth should not be less than Rs 300/- meter) complete all as specified in drawing and as directed.

Removing existing u/s cushion from back Assembly and S&F new cushion moulded type 50mm thick, 50-55 density of sizes 460mmx460mmx50mm of existing pattern size and shape, covered with tapestry cloth of approved colour and quality (rate of tapestry cloth should not be less than Rs 300/- meter) complete all as specified in drawing and as directed.

Removing and cleaning the old painted surface by scrubbing smoothing the surface by emery cloth and applying two coat of synthetic enamel Black paint or reqd shade to match with the existing shade, complete all as specified in drawing and as directed.

Chair revolving low back Godrej PCH-9103 (R)

Removing existing u/s PU hand rest and S&F new PU hand rest as per existing pattern as directed.

Removing existing u/s pedestal (Caster wheel base) and S&F new heavy duty pedestal Stainless steel star base with approved quality heavy duty wheel as per existing pattern as directed by engineer-in-charge.

Removing existing u/s caster wheel and S&F new heavy duty caster wheel (set of five) as per existing pattern as directed by engineer-in-charge

Taking down the Gas lift and mechanism with up lock of revolving chairs and replacing the same with heavy duty Gas lift of approved quality as per existing model and as directed.

Removing existing u/s tapestry cloth and moulded type cushion from Seat and back and S&F new tapestry cloth, moulded type cushion to seat and back , lining etc as per existing pattern and as directed. (Rate of tapestry should not be less than 300/- per meter)

Repairs to Tip- up Auditorium Chairs by removing the following existing unserviceable members and providing new members

Removing the existing unserviceable rexine from the seat of Tip-up Chairs and supply and fix new rexine (textile) fabric coated of approved quality as per existing shape & size including E type PVC Beading all as specified and directed. (Cost of Tapestry should not be less than 300/-per meter)

Removing the existing unserviceable rexine from the back of Tip- up Chairs, and supply and fix new rexine (textile) fabric coated of approved quality as per existing shape & size including E type PVC Beading all as specified and directed. (Cost of Tapestry should not be less than 300/-per meter)

Removing the existing unserviceable foam cushion from the seat of Tip- up Chairs, and supply and fix new polyurethane foam cushion of 40 density as per existing shape & size all as specified and directed

Removing the existing unserviceable foam cushion from the back of Tip- up Chairs, and supply and fix new polyurethane foam cushion of 40 density as per existing shape & size all as specified and directed

Removing the existing unserviceable beading from Seat & Back Rest and supply & fix new PVC 'E' Beading heavy duty of existing size and shape as per the direction

Removing the existing unserviceable pvc wheels/rings from the sliding apparatus of the seat and supply and fix new pvc wheels as per the existing arrangements and as directed

Removing the unserviceable pvc bush from the existing push up system and supply and fix new pvc bush as per the existing arrangement and all as directed

Removing existing damaged springs of tip up chairs and supply & fix new spring 100 mm long best quality heavy duty as existing for Tip-up chairs

Cleaning of pushing slide wheel with kerosene oil and apply best quality grease to easy and noise free movements of seal all as directed

Tightening the loose nut and bolt and replacement of rusted nut and bolts with new stainless steel nut and bolts wherever required to tighten the frame and ensure smooth movement of Tip- up Chairs as per std workman ship and as directed

Chair Easy Make: Godrej Model OXBO

Removing existing u/s plywood, cushion, tapestry from seat assembly and S&F new cushion moulded type 75mm thick, 50-55 density of sizes 470mmx470mmx75mm of existing pattern size and shape, covered with tapestry cloth of approved colour and quality (rate of tapestry cloth should not be less than Rs 300/- meter) incl zip arrangements to be fixed with new s/steel nut and bolts of reqd sizes over a new 12mm thick BWR plywood complete all as specified in drawing and as directed.

Removing existing u/s tapestry cloth from seat assembly and S&F new tapestry cloth of approved colour and quality (rate of tapestry cloth should not be less than Rs 300/- meter) incl zip arrangements to be fixed and new s/steel nut and bolts of reqd sizes to be provided to fix seat to the frame. rest complete all as specified in drawing and as directed.

Removing existing u/s nylon cloth mesh type from back assembly and S&F new nylon cloth mesh type of approved quality of existing pattern, size and shape (rate of mesh cloth should not be less than Rs 400/- meter) including zip arrangement and Velcro complete all as specified in drawing and as directed.

Removing existing u/s hand rest and S & F new hand rest as per existing pattern and size, to be fixed with s/s nut and bolt as existing complete all as specified in drawing and as directed.

Removing and cleaning the old painted surface by scrubbing smoothing the surface by emery cloth and applying two coats of synthetic enamel Black paint or reqd shade to match with the existing shade, and providing 04 Nos hard PVC shoe to the chair of existing pattern and size complete all as specified in drawing and as directed.

Tip up Chair Auditorium with tilt Make: Godrej Model AUDI-II

Removing existing u/s cushion, tapestry from seat Assembly and S&F new cushion moulded type 50mm thick, 50-55 density of sizes 470mmx470mmx50mm of existing pattern size and shape, covered with tapestry cloth of approved colour and quality (rate of tapestry cloth should not be less than Rs 300/- meter) to be fixed with new s/steel nut and bolts of reqd sizes over a new 12mm thick BWR plywood of required size and shape complete all as specified in drawing and as directed.

Removing existing u/s cushion, tapestry from back Assembly and S&F new cushion moulded type 50mm thick, 50-55 density of sizes 500mmx470mmx50mm of existing pattern size and shape, covered with tapestry cloth of approved colour and quality (rate of tapestry cloth should not be less than Rs 300/- meter) incl zip arrangements to be fixed with new s/steel nut and bolts of reqd sizes complete all as specified in drawing and as directed.

Removing existing u/s tapestry cloth from seat Assembly and S&F new tapestry cloth of approved colour and quality (rate of tapestry cloth should not be less than Rs 300/- meter) and seat to be fixed and new s/steel nut and bolts of reqd sizes by replacing rusted nut and bolts to be provided to fix seat to the frame. rest complete all as specified in drawing and as directed.

Removing existing u/s tapestry cloth from back Assembly and S&F new tapestry cloth of approved colour and quality (rate of tapestry cloth should not be less than Rs 300/- meter) incl zip arrangement as existing and back to be fixed and new s/steel nut and bolts of reqd sizes . rest complete all as specified in drawing and as directed.

Removing existing u/s hand rest and S & F new hand rest as per existing pattern and size, to be fixed with s/s nut and bolt as existing complete all as specified in drawing and as directed.

Fixing of chair to the ground with stainless steel nut and bolt 100mm long, 10mm thick as per existing pattern and as directed

Removing and cleaning the old painted surface by scrubbing smoothing the surface by emery cloth and applying two coats of synthetic enamel Black paint or reqd shade to match with the existing shade, and providing 04 Nos hard PVC shoe to the chair of existing pattern and size complete all as specified in drawing and as directed.

SHANMUGA TRADERS

SRI CHAKRA CABINETS

RKRISHNANANDSONS

M/s N SURENDRAN

SIVA ENTERPRISES