SPECIAL REPAIR TO ROAD IN MD ACCN AREA OF TARAPORE ALBERT EKKA ENCLAVE AND LINK ROAD IN MT AREA UNDER GE NAMS

Amount

Repair to pot holes of any depth, not exc 1 sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 25mm in depth and making good by applying tack coat with paving bitumen @ 5Kg per 10 Sqm, putting in premixed bituminous macadam well rammed and sealed with binder @ 6.8Kg per 10 Sqm, blinded with 0.06 cum of stone chippings 6.3mm size and again well rammed to true surface (including supply of premix macadam binder and sand to uniform surface depth of pot holes n exc 30mm by using paving bitumin complete all as specified and directed.

Repair to pot holes of any depth, not exc 1 sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 30mm in depth and making good by applying tack coat with paving bitumen @ 5Kg per 10 Sqm, putting in premixed bituminous Macadam well rammed and sealed with binder 9.8 Kg prt 10 Sqm blinded with 0.09 cum of stone chippings 6.3mm size and again well rammed to true surface (including supply of premix macadam binder and sand to uniform surface depth of pot holes exc 30mm by using paving bitumin complete all as specified and directed.

Scarifying or picking gravelled macadam or bituminous macadam surfaces in area not exc 400 Sqm (exc 50 mm deep but not exc.100mm deep) including raking over and grading the broken up surface to proper to required gradient and camber including removing the unserviceable material to a distance not exc 50 metres away and stacking serviceable material for reuse complete all as specified and directed

Material and labour 75mm thick (compacted thickness) WBM with coarse aggregates of (Granite, trap or Basalt stone) of grading 2 (63 to 40mm size) granite trap or basalt), spread, rolled an basalt trap and consolidated to gradient and camber with 8 to 12 Tonne power road roller complete all as specified and directed

Description all as per item 4 .00 here-in-before but except material including cleaning, screening of material.

Material and labour for preparing unsurfaced water bound macadam surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt etc and applying evenly a priming/tack coat with paving bitumen at the rate of 10 kgs per 10 Sqm complete all as specified and directed

Material and labour for premix bituminous macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) required with 8 to 10 tonne power road roller complete all as specified and directed.

Material and labour for preparing BM surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags/air compressor to remove all loose dirt etc and applying evenly a priming/track coat with bituminous primer @ 5kg per 10 Sqm and premix bituminous macadam semi dense asphaltic concrete 30mm thick consolidated thickness with 5.5 % paving bitumin content by weight of total mix spread by using mechanical paver rolled and compacted with 8 to 12 tonne power road roller to required camper and gradient (on black top surface) to a uniform and smooth complete all as specified and directed. Note : The design mix of SDAC shall be prepared by the Govt Engineering college or aprooved lab and aprooved by the GE before commencemnt of work. The cost incurred thereon shall be deemded to be included in quoted rates.

Material and labour for continuous brick edging, with width equal to the width of the brick laid dry on end vertically with burnt clay bricks of sub class 'B' (old size bircks) including necessary excavation ,embedding bricks in the ground , tamping ground around bricks, removing any surplus spoil complete all as specified and directed

Demolition of cement concrete (unreinforced)in ground floors and pavings n.exc 15 cm thick complete all as specified and directed

Material and Labour 75 mm thick PCC 1:4:8 type D2 using 40 graded stone aggregate as in sub base and finishing the surface even & rough to receive floor finish complete all as specified.

Material and labour machine pressed precast concrete interlocking coloured paver Block any shape and size, ISI marked, 80mm thick ,M-40 grade with grey cement and pigment over and including 25mm thick sand cushion complete all as specified.

Material and Labour for marking lines on road pavements dashes, arrows, letters etc on road pavement and the like of any width with using thermoplastic compound white paint/ yellow paint hot applied 2 mm thick including glass with machine confirming to BS3262 and according to the specification laid down IRC & MOST (Ministry of Surface Transport) specification 20011(4th revision) complete all as specified. Note:- Marking shall be carried out with thermostat machine

S&F in replacement of CAT EYE / Road stud, two way refelective of dimension 110x128x 30mm with minimum weight of 530 gms aluminium alloy body, relfective panel of Colour : Amber , Red or White complete all as specified and directed. Make : Model No DA-971 of DARK EYE or equivalent model of makes mentioned in Appx B.

Material and labour for road delineator ABS round body, reflective reflectors (Amber/Red colour) and mounted on MS pipe 50mm dia duly powder coated overall length 850mm fitted with anti rust and theft steel net including welding of mild steel flat iron at bottom of delineator of size 25x5mm, 150mm long , necessary excavation and embeded in PCC block 1:2:4 type B1 of size 30x15x30cm complete all as specifed and directed Make:- Dark Eye Model No DA-74 or equivalent model of Makes mentioned in Appx 'B'

Supply and fixing of road solar stud Model dhruv made from aluminium alloy and PC construction, solar powered by monocrystel solar panel alongwith high capacity rechargable battery (led - 10mm, 3 pieces each side and total 6 pieces are used for high brightness) water proof confirming to IS-67-1977 of colour yellow red blue fixed with harder and fixed the stud with epoxy adhesive complete all as specified and Having load capacity of 40 tonnes complete all as specified and directed. Make :- Dark Eye Cat Part No DA-110 or equivalent of Makes.

M/s Randhawa Builders