Supply, Installation, Testing and Commissioning SITC of 2 Ton Split Air Conditioners HOT and COLD in OPD Room No. 6 of the Obstetrics Gynaecology Department along with Allied works at Govt. SMGS Hospital, Jammu.

SITC of 2.0 TR split air conditioners (Hot and Cold) with all accessories (along with outdoor stand) and ambient upper temperature range of >= 54 degree Celsius for cooling with Maximum cooling capacity >= 6500 W and for heating ambient lower temperature range <= 0 degree Celsius with Maximum Heating Capacity >=6000 W having Air Flow Rate >=580 cfm in Rooms of Anesthesia Department with minimum 3 star and of reputed make along with allied accessories i.e. minimum of 10’ of refrigerant pipes and communication cable. Complete job as per site requirement and instructions of Engineer-in-charge and also includes cost of materials, labour charges, transportation charges and all other charges and taxes.

SITC of Wall mounted stabilizer (AVR) for 02 TR Air conditioners of capacity 5 KVA (input voltage range 90 volts-300 volts) of reputed Make conforming to relevant IS/BIS norms and standards having High Voltage Cut-off (HVC), Low Voltage Cut-off (LVC), Overload Protection, Short Circuit Protection, Surge / Spike Protection, Time Delay Protection and Thermal Protection along with allied accessories complete for installation and commissioning. Complete job as per site requirement and instructions of Engineer-in-charge and also includes cost of materials, labour charges, transportation charges and all other charges and taxes.

Providing and laying of (using conduits and wire fasteners / cable clips/conduit fasteners) 4 sq mm ISI Marked, FRLS PVC insulated copper conductor cable of standard makes i.e. Havells, Polycab, Finolex, Anchor only conforming to relevant IS/BIS norms and standards for the purpose of connecting air conditioning unit to the electrical power connection via stabilizer. Complete job as per instructions of Engineer-in-charge and site requirements and also includes cost of materials (including clamps, bends/elbows, Tee-bends, thimbles etc.), labour charges, transportation charges and all other charges and taxes.

Providing and laying of extra FRLS PVC insulated 2.5 sq mm 4 core communication cable ISI Marked (using conduits and wire fasteners / cable clips/ conduit fasteners) of reputed make i.e. Havells, Polycab, Finolex, Anchor only conforming to relevant IS/BIS norms and standards for the purpose of connecting air conditioning indoor unit to the installed air conditioning outdoor units, as per site requirement and instructions of Engineer-in-charge and also includes cost of materials, labour charges, transportation charges and all other charges and taxes.

Providing and fitting of 32A C-curve SPN MCB pre-fitted in a durable metal gang box enclosure for 2 TR Capacity Air conditioners with of standard make i.e. Havells, L&T, Schneider, Siemens only conforming to relevant IS/BIS norms and standards (complete with fittings). Complete job as per site requirement and instructions of Engineer-in-charge and includes cost of materials (including clamps, insulation, etc.), labour charges, transportation charges and all other charges and taxes.

Providing and laying of PVC drain pipe of size viz. ¾” to collect and transport the drained water from the AC unit to a designated location, considering the specific requirements of the site. The PVC pipes will be installed with appropriate size bends and clamps to ensure proper alignment and secure connections. Job also Includes miscellaneous works Civil works like wall opening to pass ducts & pipes, plastering & refinishing of the same to the original finish as per the site requirements. Complete job as per instructions of Engineer-in-charge and site requirements and includes cost of materials (including clamps, bends/elbows, nipples, Tee-bends, etc.), labour charges, transportation charges and all other charges and taxes.

Providing and fitting of extra refrigerant copper pipes viz. 3/8” & 5/8” (one for discharge & second for suction) etc. with proper Insulation conforming to relevant norms and standards. The Cu refrigerant pipes will be installed with appropriate size bends, threaded/brazed joints and clamps as per site requirement to ensure proper alignment and secure connections. Job also Includes miscellaneous works Civil works like wall opening to pass pipes with insulation, plastering & refinishing of the same to the original finish as per the site requirements. Complete job must be as per instructions of Engineer-in-charge and site requirements and includes cost of materials (including clamps, bends/elbows, nipples, Tee-bends, etc.), labour charges, transportation charges and all other charges and taxes.